5.0 database not working in lookout 6.6
5.0 database not working in lookout 6.0. I converted the database using the lks file and then saved it. that all worked fine but my modbus stats are in 100% error connected with direct serial! any known fixes? help please!
Is this MODBUS or the database?
To use the 5.0 Databaes you need to use the NI MAX utility to convert a citadel 4 to Citadel 5 database.
Forshock - Consult.Develop.Solve.
Similar Messages
-
CitadelControl not working with Lookout 5.1 build 8
CitadelControl is not working with Lookout 5.1 build 8.
I have used it sucessfully with Lookout 6.02. Data is all good as I have checked it as with my previous post.
Using the same configuration in Lookout 5.1 as in 6.02.
Any ideas?
WaterworksWe are using Citadel4 database on the Lookout 5.1 build 8 system.
I have noticed that in Lookout 6.02, when using the browse button beside "To the database" that it allows you to create a database.
In Lookout 5.1 it does not have this option. So I created a folder and then entered the pathname. I think I must be missing a step.
Is there a way to create a backup database first? -
Hello,
I am having a 10g release 1 database on my HP UX server.
The problem with this database is it's listener is working emagent is working fine.
But I am trying to login with system password then it shows me error like
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directoryModerator Comment:
The O.P. had already asked this question in the Solaris 10 forum.
Database not working
I had already moved it to the Database forum.
Then after the comments in this thread, they've re-posted it yet again into the Database forum.
Not able to connect / as sysdba
and spammed it to the Oracle Linux forum:
Not able to connect / as sysdba
Handle: user8856758
Status Level: Newbie
Registered: Jun 22, 2011
Total Posts: 6
Total Questions: 4 (3 unresolved)@ user8856758 ,
You've been here long enough to know better, so we can only assume you are just being inconsiderate or rude with all your crossposts.
They're all locked. -
Database not working when network is offline
I have installed Oracle 11gExpressEdition in my office laptop. It works fine if my laptop is connected with my office network and its not working outside office network. I am trying for long time to resolve this issue but couldn't able to find success.
I tried with changing Pcname in "C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora" AND "tnsnames.ora" TO "localhost" and "127.0.0.1".
Installed Windown loopback adapter and reinstalled application. But nothing works.
Can you please help me
Thanks in Advance..Thanks for your replay,
Add to my question, database instance is running and my application can able to connect to database only issue is the link using for management portal
http://127.0.0.1:8080/apex/f?p=4950
is not working showing "Cannot display the webpage".
Here is my listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO) -
Hi I have created one standby DB for Oracle 10.1.0.2.0 on same server for the primary Db.As per Oracle docs I have configured everything but when I do logswitch on primary DB and then check the standby DB as...
SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME
FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
it shows no records, that means it is not working.
I have created standby redolog file in the primary DB , as I am using LGWR ASYN mode of redo transform but when I do..
SQL> SELECT GROUP#,THREAD#,SEQUENCE#,ARCHIVED,STATUS FROM V$STANDBY_LOG;
GROUP# THREAD# SEQUENCE# ARC STATUS
4 2 0 YES UNASSIGNED
it show the status unaccessed.
please help me to sort out this problem....
RegardsHi
Thanks to all. Yes I checked the alert logs for both DB, there was some problems due to DB_FILE_NAME_CONVERT ini parameter setting. after I fixed that, I am getting this error in lgwr.trc file
Dump file c:\oracle\product\10.1.0\admin\orcl\bdump\orcl_lgwr_1368.trc
Tue Mar 11 15:39:17 2008
ORACLE V10.1.0.2.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:14M/255M, PG:123M/909M, VA:1749M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 5
Windows thread id: 1368, image: ORACLE.EXE (LGWR)
*** SERVICE NAME:() 2008-03-11 15:39:17.008
*** SESSION ID:(167.1) 2008-03-11 15:39:17.008
LGWR: Archivelog for thread 1 sequence 42 will NOT be compressed
*** 2008-03-11 15:39:17.227 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
*** 2008-03-11 15:39:17.258 45203 kcrr.c
Initializing NetServer for dest=stby
Initializing PGA storage for Netserver communication
Allocating a brand new NetServer
Allocated NetServer 0
NetServer 0 has been started.
Subscribing to KSR Channel 0
success!
Indicating recv buffer for KSR Channel 0
success
Waiting for Netserver 0 to initialize itself
*** 2008-03-11 15:39:20.415 45488 kcrr.c
Netserver 0 has been initialized
LGWR performing a channel reset to ignore previous responses
LGWR connecting as publisher to KSR Channel 0
LGWR-NS 0 initialized for destination=stby
*** 2008-03-11 15:39:20.415 45982 kcrr.c
Making upiahm request to NetServer 0
Waiting for NetServer 0 to respond to upiahm
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer 0 (ocis 0x05FCE6E0)
NetServer pid:2916
*** 2008-03-11 15:39:24.274 47331 kcrr.c
upidhs done status 1031
*** 2008-03-11 15:39:24.274 46176 kcrr.c
upiahm connect done status is 1031
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
ORA-01031: insufficient privileges
*** 2008-03-11 15:39:24.336 52124 kcrr.c
LGWR: Error 1031 creating archivelog file 'stby'
*** 2008-03-11 15:39:24.383 50571 kcrr.c
kcrrfail: dest:2 err:1031 force:0 blast:1
*** 2008-03-11 15:39:37.680
Old character set id was US7ASCII
*** 2008-03-11 15:39:38.055
New character set id is WE8MSWIN1252
now how to give privilege to the service 'stby'.
please give me some guidance.
regards -
I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
ThanksHi
Is that ok when you set to single mailbox?
If ok, please try
Get-Mailbox -database “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
Cheers
Zi Feng
TechNet Community Support
Please see the original post, I've already tried "Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission
-user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As"
If I add the permission individually through ECP, it works just fine. What I'm trying to accomplish is full mailbox access to all mailboxes in the database now and in the future
(something that works just fine in Exchange 2010,) however in 2013 it is not working. I tried doing it via a security group instead, same result. -
Multiple Image Upload with save to database not working in IE anymore
Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefox.
PSE Advice.I would consider buying some pluggins from dmxzone.com. They
may cost a
bit upfront but in the long run, you've probably be saving a
lot of
headaches.
http://www.dmxzone.com/
If time's an issue, with these plugins, you could probably
be up and
running in a half hour. George has some really nice pluggins
for
Dreamweaver and well worth the money.
Peter Raun wrote:
>
I am going crazy here
> I will see if i can explain my problem here. . .
> I am trying to use the multiple image upload with save
to database function in
> the developer toolbox, and it work just fine, it lets me
select where to store
> the filename in database and where i want to save the
actual image on the
> server. It is wery easy to use if you just want these
functions.
> But i would also like to give every image a gallery id
in the database, so i
> can sort them out afterwards, its not whery smart to
upload a lot of images to
> a folder, and in the database you just have an image id
and an filename, i cant
> sort them into galleries with these to collums. . . . So
i guess i have to do
> something with the "additional fields" when i am
creating the server behavior
> but i cant figure out what to do?? i would have liked if
i could have made an
> list/menu with all of the availible galleries, and chose
the one that i whould
> add images too and then that gallery id whould be added
to those images in the
> database.
> I have also tried to pass on an url parameter and then
use that as a default
> value in the "additionel field" section but without any
luck at all. . . I hope
> someone here has an idea, that could help me out. . .
> It is sooooo easy to do this, when you are uploading ONE
image at a time, i
> cant figure out why it has to be sooooo hard when using
"multiple image
> upload"
> -
DB13 Check database not working
Hi All,
Check DB and update stats from DB13 does not work. It comes back with the following error
Can't exec external program (No such file or directory)
Checked from OS level and found that brconnect -u / -c -f check works only from exe directory. If i execute the
command from any other directory it comes back with an error saying command not found
Upon further investigation found that this is an issue with env variable PATH
The current value of PATH in env variable of sidadm is
PATH=/oracle/SID/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/export/home/sidadm:/usr/sap/SID/DVEBMGS01/exe:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
I want to change the value from usr/sap/SID/DVEBMGS01/exe to /usr/sap/SID/SYS/exe/run
I checked all the csh and .sh profiles for sidadm user but i did not find any PATH variable,
I can see DIR_LIBRARY and LD_LIBRARY_PATH but i cant see PATH variable
Checked the shell and it is /bin/csh
checked .bash_profile and all i can see is this
.bash_profile
Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
Has any one faced this issue earlier??
Meanwhile i have found a temporary fix for timebeing i.e i copied all the br* executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and after doing that DB13 - DBcheck and Update optimizer works fine.
Regards,
Ershad AhmedHi Sunil and Eric
Thanks for the reply
I checked all the profiles but no luck. I cant find the parameter.
As i mentioned in my earlier post i have found a temporary fix by copying the br executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and ran saproot.sh and that resolved the issue.
If i can change my PATH variable to point to /usr/sap/SID/SYS/exe/run that would be a permanent fix
Regards,
Ershad Ahmed -
Cfmail querying database not working
The code below is not working and I am not getting any
errors. Any suggestions.
<cfparam name="notifyDate" default="#DateFormat(Now(),
"short")#">
<CFQUERY name="getNotifications" datasource="AEDWEB">
SELECT u.strEmail,
u.strFirstName,
u.strLastName,
cc.strCCNoteEmailBody
FROM umsUsers u,
ctsConferenceCalls cc
WHERE cc.dtsCCNotificationDate = '#notifyDate#'
AND u.intCCNotify = 1
AND u.intMemberstatus = 1
</CFQUERY>
<CFOUTPUT query="getNotifications">
<CFMAIL TO="#strEmail#" FROM="[email protected]"
SUBJECT="Conference Call Reminder" SERVER="mail.ccicom.com"
port="25">
#strCCNoteEmailBody#
</CFMAIL>
</CFOUTPUT>I just can a query with the WHERE, AND and I get data return.
I also modified the code by taking the cfoutput statement out. I
still get no mail. I also check in CF admin and the mail server is
running. Any other sugguestions please.
<cfparam name="notifyDate" default="#DateFormat(Now(),
"short")#">
<CFQUERY name="getNotifications" datasource="AEDWEB">
SELECT u.strEmail,
u.strFirstName,
u.strLastName,
cc.strCCNoteEmailBody
FROM umsUsers u,
ctsConferenceCalls cc
WHERE cc.dtsCCNotificationDate = '#notifyDate#'
AND u.intCCNotify = 1
AND u.intMemberstatus = 1
</CFQUERY>
<CFMAIL TO="#strEmail#" FROM="[email protected]"
SUBJECT="Conference Call Reminder" SERVER="mail.ccicom.com"
port="25">
#strCCNoteEmailBody#
</CFMAIL> -
Polling to Database not working sometimes
Hi all,
I have created an ESB project. I am using polling operation to poll Oracle database table. I am using update field i.e. logical delete opeartion under polling.
I have deployed my process, its running perfectly fine. Polling is also happening.
But the problem is that polling is not consistent. With the same set of values, sometime polling takes place and some time nothing happens, means no update in the table & no instanses on ESB Console.
I have checked the log file too, but no such entry is there.
To overcome this problem, Whenever I restart my SOA server(10.1.3.3) everything works fine. But after few hours same thing happens.
Can anybody tell me, how to figure out what is happening.
Thanks,
Abhi...
Message was edited by:
Abhishek saurabhHi chintan,
I made this change in the logger configuration yesterday. Today morning when I logged into my ESB console and navigated to instance tab, I am not able to see any instance and I am getting this error:
An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.model.repository.exception.RepositoryException: Unable to get connection to Repository Ensure repository is accessible at oracle.tip.esb.model.repository.database.DatabaseRepository.getConnection(DatabaseRepository.java:1228) at oracle.tip.esb.model.repository.database.DatabaseRepository.getESBParameter(DatabaseRepository.java:1082) at ......<more..>
(Thread.java:595) Caused by: java.sql.SQLException: ORA-00257: archiver error. Connect internal only, until freed. at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138) at
.....<more>
So I went to EM console, oc4j_soa->Administration tab->JDBC resorces->Connection pool->ESBpool(For ESB)->Test connection->Pressed Test button.
I am getting this error:
Unable to establish connection to "ESBPool". Error message: Exception occurred testing connection. Exception: java.sql.SQLException: ORA-00257: archiver error. Connect internal only, until freed
Any inputs on this...
Thanks,
Abhishek... -
Export of database not working
Hi,
I have Oracle 8.1.7 server/client on same machine (standalone)...i have created 2 database...db1(dbname - xxx) & db2 (dbname-yyy)
I wanted to take a database dump using "exp.exe"...
for my db1 i was able to take with the following commands..
d:\oracle\ora81\bin\exp.exe sys/change_on_instal@xxx file=d:\db1.dmp buffer=1000000 Full=y log=db1_exp.log compress=y
But when i tried for db2 with the dabname changed...
d:\oracle\ora81\bin\exp.exe sys/change_on_instal@yyy file=d:\db2.dmp buffer=1000000 Full=y log=db2_exp.log compress=y
But the problem is that it again takes the dump of db1 ...even with the dbname change to yyy...but the database db1 & db2 are working fine...
does anyone faced such a problem? anybody can help me?
thank you in advance
ManojHi,
Thx for replying...
Yes i am able to loginto both DBs (xxx & yyy)...thru Sqlplus with user "sys".
I am pasting teh entries for the tnsnames.ora,listener.ora& snmp_ro.ora here...
xxx - DB1 whose database i was able to export
yyy - DB2 which is not successful
Thank you
Manoj
listener.ora:
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 2481))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = yyyB)
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = yyyB)
(SID_DESC =
(GLOBAL_DBNAME = yyy)
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = yyy)
(SID_DESC =
(GLOBAL_DBNAME = xxx)
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = xxx)
tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
# Date..........: Mon Dec 01 05:58:49 PST 2003
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = xxx)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
yyy =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = yyy)
xxx =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = xxx)
snmp_ro.ora:
snmp.visibleservices = (listener, xxx, yyy)
snmp.shortname.listener = LISTENER
snmp.longname.listener = listener_server
snmp.configfile.listener = D:\oracle\ora81\network\admin\listener.ora
snmp.oraclehome.listener = D:\oracle\ora81
snmp.servicename.listener_server = OracleOraHome81TNSListener
snmp.SID.xxx = xxx
snmp.oraclehome.xxx = d:\oracle\ora81
snmp.address.xxx = (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=ORACLE)(ARGV0=ORACLExxx)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))
snmp.remoteaddress.xxx = (DESCRIPTION=(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521)))(CONNECT_DATA=(SID=xxx)(SERVER=DEDICATED)))
snmp.SID.yyy = yyy
snmp.oraclehome.yyy = d:\oracle\ora81
snmp.address.yyy = (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=ORACLE)(ARGV0=ORACLEyyy)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))
snmp.remoteaddress.yyy = (DESCRIPTION=(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521)))(CONNECT_DATA=(SID=yyy)(SERVER=DEDICATED)))
ifile = D:\oracle\ora81\network\admin\snmp_rw.ora
ifile = D:\oracle\ora81\network\admin\sqlnet.ora -
Database Firewall in-line between clients and database not working
I’m trying to configure a Standalone Database Firewall in-line between the clients and the protected database so it can block some statements. I’ve followed the Installation Guide and the Administration Guide, but can’t get it working. I’ve configured one Enforcement Point with one Protected Database.
I’ve configured Database Firewall with three Ethernet cards:
eth0 is used for Management (IP. 192.168.1.81)
eth1 and eth2 are associated with Bridged interface br0
The protected database is listening in 172.16.40.3:1521.
The clients are in subnet 192.168.1.x.
I’ve configured the Traffic Source br0 with the IP 172.16.40.2 and is enabled as the Traffic Source in the Enforcement Point.
In the configuration file appliance.conf corresponding to the Enforcement Point, I’ve seen the parameter PROXYPORT=1534, so I understand the clients should connect to this port in Database Firewall in order to access the protected database. Is this assumption correct? Is the configuration I’ve done correct? Are there any additional configuration steps that should be made? Is there any documentation about this configuration files?
Thanks,
PabloFor in-line blocking mode to work out of the box it is necessary that DB Client's IPs (as they are seen in DBFW), br0 and DB IP are all on the same subnet. If this is not the case you would need to fiddle with routing on the DBFW manually which you are discouraged to do because it's unlikely to be persistent, work correctly after upgrades etc... DBFW is not intended to be a router although it can be made to perform this function. In general I would advise you to stay within the supported configuration and just make sure you network infrastructure is ready for DBFW deployment. IE make sure all these IPs are on the same subnet
-
Logical Stanbdy database not working
Dear Friends,
I configured a logical standby database in oracle 11g. First i configured the physical standby. Its working fine. Data transfered. Then i convert to logical standby. The commands are working correctly. SCN also changed in logical standby. Archives from primary to standby moving correctly. But its not applying.
Please help me to solve this issue.
STANDBY DATABASE
SQL> select type,high_scn,status from v$logstdby;
TYPE HIGH_SCN STATUS
COORDINATOR 1250354 ORA-16116: no work available
ANALYZER 1250258 ORA-16116: no work available
APPLIER 1250258 ORA-16116: no work available
APPLIER 1248628 ORA-16116: no work available
APPLIER 1250251 ORA-16116: no work available
APPLIER ORA-16116: no work available
APPLIER ORA-16116: no work available
READER 1250354 ORA-16116: no work available
BUILDER 1250292 ORA-16116: no work available
PREPARER 1250291 ORA-16116: no work available
10 rows selected.
SQL> select name,value from v$logstdby_stats where name = 'coordinator state';
NAME VALUE
coordinator state IDLE
SQL> select applied_scn,latest_scn from v$logstdby_progress;
APPLIED_SCN LATEST_SCN
1250393 1250396
standby alertlog
Primary database is in MAXIMUM PERFORMANCE mode
kcrrvslf: inactive RFS archival for log 4 thread 1 sequence 96
kcrrvslf: inactive RFS archival for log 5 thread 1 sequence 97
kcrrvslf: inactive RFS archival for log 7 thread 1 sequence 93
kcrrvslf: inactive RFS archival for log 8 thread 1 sequence 94
RFS[3]: Successfully opened standby log 6: 'D:\APP\THI\ORADATA\LOGDB\STDREDO3.LOG'
Sun Sep 11 18:45:32 2011
LOGMINER: End mining logfile for session 1 thread 1 sequence 97, D:\APP\THI\ORADATA\LOGDB\STDREDO2.LOG
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 98, D:\APP\THI\ORADATA\LOGDB\STDREDO3.LOG
LOGMINER: End mining logfile for session 1 thread 1 sequence 98, D:\APP\THI\ORADATA\LOGDB\STDREDO3.LOG
Primary database is in MAXIMUM PERFORMANCE mode
kcrrvslf: inactive RFS archival for log 4 thread 1 sequence 96
kcrrvslf: inactive RFS archival for log 5 thread 1 sequence 97
kcrrvslf: inactive RFS archival for log 6 thread 1 sequence 98
kcrrvslf: inactive RFS archival for log 7 thread 1 sequence 93
kcrrvslf: inactive RFS archival for log 8 thread 1 sequence 94
RFS[3]: No standby redo logfiles of size 102400 blocks available
Sun Sep 11 18:47:35 2011
ARCH: Archival stopped, error occurred. Will continue retrying
Errors in file c:\app\thi\diag\rdbms\logdb\logdb\trace\logdb_arc2_1044.trc:
ORA-16014: log 7 sequence# 93 not archived, no available destinations
ORA-00312: online log 7 thread 1: 'D:\APP\THI\ORADATA\LOGDB\STDREDO4.LOG'
SQL> show parameter log_archive_dest_1
NAME TYPE VALUE
log_archive_dest_1 string LOCATION=D:\APP\THI\arch\ VALID_FOR=(ONLINE_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=logdb
SQL> show parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string service=proddb LGWR SYNC valid_for=(online_logfiles,primary_role) db_unique_name=proddb
SQL> show parameter log_archive_dest_3
NAME TYPE VALUE
log_archive_dest_3 string service=logdb LGWR SYNC valid_for=(online_logfiles,primary_role) db_unique_name=logdb
PRODUCTION
SQL> select current_scn from v$database;
CURRENT_SCN
1250406
SQL> show parameter log_archive_dest_1
NAME TYPE VALUE
log_archive_dest_1 string LOCATION=c:\app\arch\ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=proddb
SQL> show parameter log_archive_dest_3
NAME TYPE VALUE
log_archive_dest_3 string service=logdb LGWR SYNC valid_for=(online_logfiles,primary_role) db_unique_name=logdb
If any doubt, please tell me.
Please help me.I happy to help but you can help too ( Total Questions: 11 (11 unresolved)) Please consider marking some of your old questions answered.
You have a valid_for attribute mismatch issue :
Yours :
log_archive_dest_1 string LOCATION=D:\APP\THI\arch\ VALID_FOR=(ONLINE_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=logdb
log_archive_dest_1 string LOCATION=c:\app\arch\ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=proddbI think the ONLINE_LOGFILES should be replaced with ALL_LOGFILES.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_arch_dest_param.htm
Great details by the way.
Best Regards
mseberg
I also noticed this Oracle note :
Logical Apply stops with ora-16260 [ID 784743.1]
Edited by: mseberg on Sep 12, 2011 7:58 AM -
Verify Database not working!
Hello everyone,
I have a requirement for a database to be verified everytime the report is run, because of the dynamic nature of the data behind the report. However, the ReportClientDocument.verifyDatabase() is not behaving as I think it should. I assume it should behave the same as using the 'Verfy Database' comand within CR2008.
NOTE: The report works PERFECTLY without the verifyDatabase() command. But because of the dynamic nature of the data you have to keep using 'Verify database' via the CR2008 designer! This is not sustainable.
Here is my JSP, I will post the error separately for readability:
//SOME IMPORT DONE HERE
CrystalReportViewer crystalReportViewer;
ReportClientDocument reportClientDocument;
Object reportSource;
ParameterFieldController parameterFieldController;
String reportType = request.getParameter("reporttype");
if (reportType == null) {
reportSource = session.getAttribute("reportSource");
else {
String reportPath = request.getParameter("report");
String DB_USER_NAME = new String(Base64.base64ToByteArray(request.getParameter("dbusername")));
String DB_PASSWORD = new String(Base64.base64ToByteArray(request.getParameter("dbpassword")));
reportClientDocument = new ReportClientDocument();
reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
reportClientDocument.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
IStrings subreportNames = reportClientDocument.getSubreportController().getSubreportNames();
for (int i = 0; i < subreportNames.size(); i++) {
ISubreportClientDocument subreportClientDoc = reportClientDocument.getSubreportController().getSubreport(subreportNames.getString(i));
subreportClientDoc.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
reportClientDocument.verifyDatabase();
// SOME PARAMETERS SET HERE
reportSource = reportClientDocument.getReportSource();
reportClientDocument.close();
Does anyone have any examples of how to use the verifyDatabase, or can you see where I am going wrong?
Best Regards
Nick HirstThe error reads:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.verifyDatabase(Unknown Source)
com.crystaldecisions.reports.sdk.ReportClientDocument.verifyDatabase(Unknown Source)
org.apache.jsp.CrystalReportViewer_jsp._jspService(CrystalReportViewer_jsp.java:91)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717) -
Standby database not working after reinstallation of oracle in primary DB
Hello All,
Initially I had setup primary database (DB1) and Standby database (DB2), for test environment.
In DB1 I had got ORA-600 error. So, after I researched, I came to know that I need to apply some patches. But I reinstalled oracle in DB1. And the problem was solved in DB1.
After that, I issued the following commands in DB2, but I got error
SQL>SHUTDOWN IMMEDIATE;
ORA-01034: Oracle not available
ORA-27101: shared memory realm does not exist
SQL>STARTUP MOUNT;
ORA-27102: out of memoryNow, I mean to say, both DB1 and DB2 are independent.
Also, DB2 is not active since 2 months
DB1 is working fine.
Please guide me with procedure, how to configure DB2 for the current DB1Hello;
After two months I would rebuild.
If you are on Oracle 11 you can use RMAN to do this quickly.
Here's a few short notes :
http://www.visi.com/~mseberg/duprman2.html
http://www.visi.com/~mseberg/standby_creation_from_active_database_using_rman.html
Can you post your full oracle version and Primary database size?
If you rebuild I would remove all the data files from the Standby, recopy the password file from the Primary to the Standby and double my tnsnames.ora and listener.ora on both servers.
Best Regards
mseberg
Maybe you are looking for
-
Windows shared folder asks for permanently delete
Hi, Any file from windows shared folder asks for permanently delete and after that it is not recoverable... Please help, how to enable recycle bin service??
-
Hi, We have implemented performance management and implemented extended notification using UWL to get outlook email. Every thing is working fine the only problem is - whenever we get an email the FROM person is the person who has configured the syste
-
Choice of shared storage for Oralce VM clustering feature
Hi, I would like to experiment the Oracle VM clustering feature over multiple OVM servers. One requirement is the shared storage which can be provided by iSCSI/FC SAN, or NFS. These types of external storage are usually very expensive. For testing pu
-
I have this in my technical design interace: We need to know which processing program we have to call: SELECT SINGLE PROCPROG INTO l_procprog FROM ZGL_MPF_CONFIG WHERE interfacename = INTERFACENAME. Open a job with this processing program (
-
Using https on 7002 with start button
I want to use https protocol on 7002 when the application starts. How can the start button on workshop be set to use https?