5.0 gives me a blue screen

I am running windows XP.Ever since you updated me to 5.0, i get a blue screen . I need to go back to 4.o but you won't let me...always updates to 5.0

Similar Messages

My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
1. Why is my phone doing this?
2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

My system is frezing and then gives me a blue screen

Pavilion a6426.sc, Windows Vista

When you say blue screen, do you mean the type that says Windows is shutting down to protect the computer or gives an error code that starts with "0x"?
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking the answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

My MacBook pro is less then a year old and when I try to shut it down it gives me the blue screen and the loading spinner but the doesn't do anything or shut down. I've already tried to reinstall Mac os x but that didn't work any ideas?

It stays on the blue screen forever until I manually shut it down

Cooper, please start a new thread. You'll get a wider audience and won't confuse Quintonaturner with issues that don't pertain to them. You don't know they have Office. Many Mac users don't. http://www.neooffice.org is a nice alternative, and so is http://docs.google.com/ as long as you don't have Exchange servers that aren't Mac OS X Mail compatible.

What is nipalk.sys and why does it give me the Blue Screen of Death?

Recently I purchased a 6211 USB data acquistion unit. Everything worked fine until one day Windows Explorer crashed (we all know how rare that kind of event is...). When I re-booted, I got the Blue Screen of Death, with a message about nipalk.sys being the culprit. I booted in Safe Mode and re-named this file, and then was able to boot normally and re-install the driver software for the 6211, and everything was fine...for about a week, when Windows Explorer did it again (Oops!).
Does anyone know:
    1. Which exact part of the install supplies nipalk.sys? It is a huge install with multiple parts accross 2 CDs. I could save a lot of time if I could restrict the install to just repairing the damage.
    2. Can I just make a copy of nipalk.sys and tuck it away in some corner of my hard drive to use as a replacement when this happens?
    3. I'm guessing that nipalk.sys is used by the little system tray icon that watches out for DAQ devices to be plugged into my USB. Is this guess correct? Can I turn this feature off for the 99% of the time I'm not using my laptop for data acquisition? Will that protect me against the gorking of nipalk.sys when Explorer goes down?
    4. What is this driver doing that its file disk becomes corrupted during a Windows Explorer crash?

Paul-
OK. When I can afford the time, I will try removing all NI software and re-installing. I have LabVIEW 8.0, DAQmx (of course), NI Vision development, and IMAQ.
I also had LabVIEW 7.1 on my machine because it was too much trouble to
remove it when I upgraded to 8.0 I have since removed 7.1, but I think there are still a lot of older versions of the "extras" that came along with it still lurking on my hard drive....
I was hoping for some guidance for a short-term "work around:"
1. If I just re-install DAQmx, can I make a copy of nipalk.sys and store it somewhere as a back-up to avoid the painfully long 2 CD re-install of DAQmx?
2. If the answer to 1 is "no", then exactly what part of DAQmx installs nipalk.sys? It is a multi-part install, and if I know which part is responsible for nipalk.sys, I can repair just that and save a lot of time.
To answer your questions about version: I'm not sure. I don't have convenient access to the disks at the moment, but they came with my 6211, which I ordered in May of 2007. I would be tempted to call it "the latest", but DAQmx seems to get updated quite frequently, so let's just call it a "recent" version.
Thanks,
-Geoff

[Solved] Playing movie on external monitor gives me a blue screen

Nevermind. I found the xvattr package in the AUR.
I've tried this on both VLC and Mplayer and everytime the movie starts I see blue instead. On the built in monitor for my laptop the DVD is viewable. To get tv-out I use this command:
xrandr --output VGA-0 --mode 1024x768
I thought that this might have to do with the standard that is set so I tried to change it with the advice on the wiki (for ATi drivers):
xrandr --output VGA-0 --set tv_standard ntsc
But it gives me this:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 27
Current serial number in output stream: 27
How do I get DVD's to play on an external monitor?
Last edited by Gen2ly (2010-07-09 00:18:14)

So I have the exact same issue (never a problem with my G4 12" Powerbook).
I found this in an Apple support document:
"When you are finished using your MacBook Pro, MacBook, or PowerBook G4 in closed-lid mode, the internal display will not come on when you open the lid until you have disconnected the external display. If you want the internal display to enable again, remove the external display connector, put the computer to sleep, and then open the lid. This will toggle the computer to come out of closed-lid mode and once again provide power and a video signal to the internal display."
I'm not sure how you put the MBP to sleep in closed lid mode if you have already removed the external display....
I am going to try putting the MPB to sleep, THEN removing the external display, then re-waking..... We'll see
The article is at:
http://docs.info.apple.com/article.html?artnum=300562
Good luck!

Windows gives Blue screen of death when connect ipod

I have an ipod 20g and everytime i connect it to my 2.0 usb windows freezes gives me a blue screen and restarts

same problem here, also with a 20gb ipod. Mine also shuts the PC down on a disconnect of the ipod as well although this is less frequent.
I was using the USB2 ports on the front of my Dell but I've swithed them round now and am using a Firewire port on the back and touch wood it hasn't happened in the 2 days since I switched over.

MacBook Pro gives a blue screen when I try to start from a bootable usb stick

Since yeasterday my MacBook Pro is refusing to startup. The starup proccess goes like Apple Logo, Spinning wheel, white dispaly and stops - freezes there.
So I made a bootable usb stick and tried to boot from there so to be able to do a format and repair it. Also the recovery HD wont boot...
When I start my Macbook Pro from the bootable usb stick it gives me a blue screen. I have tried to reset PRAM but nothing.
I am attaching 2 images of the blue screen.
Please help...!!!

Guys thank you for your replies. I could boot in any way... I tried several things.
Finally a friend managed to give me an Apple Hardware Test and it came with these results... Any ideas ?

IPhone 5s died overnight while charging, blue screen and logo loop

I was charging my iPhone overnight and woke up to a dead phone. Tried restoring with iTunes a few times with no luck, it kept giving me the error code 40. Everything on my Mac is up to date and am having no trouble connecting to the iTunes servers even though I'm in Kathmandu, so I assume this is a hardware issue now.
Tried to put it into DFU mode without any success, the only thing that it did was give me the blue screen, Apple logo, yellowish screen loop before going off again. Requested a call w/ Apple (Case ID: 608858029), but unsure if they'll have any luck reaching me through my Google Voice number on my laptop since I'm in Kathmandu and my phone is now obviously not working.
Even though I got the phone in late September last year, according to Apple I'm already out of warranty? Thought they had a one year warranty? In addition I cracked my screen back in March, so does that automatically void my warranty even though this BSOD seems to be an unrelated issue? The phone was working fine with the cracked screen for over a month. If my warranty is void and I'm not going to be getting any help, I might open up my phone and disconnect my battery as mentioned in this thread.
All suggestions appreciated. Since I'm going to be in Nepal / Tibet for another month, I might pick up a cheap Android phone if all else fails.

Due to the crappy internet connection, had trouble answering the calls in time every time Apple tried calling so I ended up calling them and had a very pleasant discussion with the CSR for about 30 min.
Phone would've been replaced under warranty except since I cracked the screen, I have to pay the out of warranty cost which is about $269 + tax. Reasonable even though it's much more than the $50 I was going to pay for a replacement screen. But the whole BSOD put a dent in those plans.
They also directed me to Apple Care in China, the closest country with authorized Apple centers to Nepal. Gave me the number (864006272273) which was helpful. But since I'll be on the move for the next four weeks I have no idea how they were going to get the replacement phone to me... unless they send a porter with it and track me down somewhere on the trail in Amphu Labsta.
Guess I'll just hold onto the phone until I get back to NYC.

When I open FireFox i get the blue screen of death and then vista restarts. I get to login and then afterthe welcome window it crashes and restarts again. I can open in safe mode but if I open firefox again it restarts this loop.

The other day I opened firefox after the latest update in September. Firefox then closes and then i get logged off and vista(32 bit) restarts. I get back to login and when I try to login it gives me the blue screen and restarts again with the selection screen (start in safe mode....)I was able to login on safe mode and then on admin afterwards. Thinking the problem was just an error I went back and opened firefox on my account and the loop started again. I was forced to remove firefox but I want ti back and I want to know how this can be fixed so I can put it back on my computer.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

Blue screens when playing games

hello people
I bought not long ago the msi K8T Neo-FIS2R
It worked great and i got good benchmarkresults.
But when i installed battlefield 1942 and played it , it would give me a blue screen wich says: he would dump his memory.
i installed the latest via drivers and nvidia detonators. (lifeupdate)
now when i play halflife (counterstrike) thers seems to be no problem at all.
i know halflife is a lightweight game and battlefield is not, so more heavier load wil make my windows crash.
Reading almost every thread on this forum i can say i found my solution for the problem.
I read here that you recommend a pcu of at least: 12V > 20 ampere
but mine is only 16 ampere on 12V
I have 4 case fans> a WD raptor > dvd player, burner . etc. >>>> i think i will buy a new psu.
now i have another problem.
when i install the newest via drivers and i install the via 2.0/3.0 agp driver > i have this very strange problem.
when i install the nvidia drivers , the installation is ok > i look with the drivers , and there are none installed. > not even nvidia logo in the left corner (next clock)
>> what driver i want to install, it doesnt mather. >windows wont use it.
when i install the via drivers without de agp driver>>> i do not have any problems.
any suggestions?
(ps sorry for grammar mistakes > i am dutch

hello people
(geertje > dark half)
now i've installed windows xp 64
after some driver problems i've managed to create a very solid and stable system.
AND when i install the via 4-1 drivers from via my problems seems to be solved.
NOW after the install of the agp driver > i do not have any problems installing the nvidia graphic drivers.
strange isn't it.
in win xp (32 bit) i cannot install the latest via AGP 2.0/3.0 driver.
but with windows xp 64 i can without problems.
there are no blue screens anymore.
tyresmoke: you have advised me to buy a better psu. (i didnt buy one yet).
But the problem lies with the agp driver from via.
when i install this one and reboot> it always gives a blue screen> without the via driver > no blue screens (only blue screen with battlefield 1942 or vietnam)
there is something with my agp slot or hypertransport??
anyone suggestions?
ps . > ive tried mem test 86 for 16 hours and found NO PROBLEMS
ive run prin 95 and toast for 12 hours> no problems

Youtube Crashes my computer. Blue Screen event.

OK, so, I have a Toshiba laptop that runs Windows Vista. The internet browser I use is Mozilla Firefox ( just recently downloaded a new beta version of it too and tried that, didn't fix anything). Every time when I'm on youtube, my computer shuts down and gives me a blue screen (sometimes it takes one hour, two hours, three hours, or more, it's also done it right after the computer starts, and I've tried with only youtube open, so it's not that I'm running too many things, I don't think). Then it restarts itself before I have the chance to read anything on the blue screen and tells me that windows is recovering from an unexpected shutdown. It gives me nothing when I look for a solution, but these are the details it gives me:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 34000000
BCP2: 00000002
BCP3: 00000001
BCP4: 81FBEFF9
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini011611-04.dmp
C:\Users\MustangGirl\AppData\Local\Temp\WER-39608-0.sysdata.xml
C:\Users\MustangGirl\AppData\Local\Temp\WERC090.tm p.version.txt
I've looked in the youtube support forum. They referred me to the Microsoft support forum to look for a solution.
Then I figured I should check the manufacturer's website. At first I was sure it was something wrong with my DVD driver, but I fixed that and it's still happening. A little over a week ago, I did a system restore back to factory point, so I'm not convinced that that'll work, however I didn't start having this problem until AFTER I did the restore...so maybe that was it? I don't know.
Someone suggested that I've acquired a virus. I have anti-virus software.
And it can't have anything to do with my computer overheating because I use a cooling pad. Any help at all would be very appreciated!
Oh! And it happens in Internet Explorer as well. And I always check for Windows Updates on my computer. I download them when I have them, but right now I don't have any new important ones.
I was finally able to get the blue screen to stay long enough for me to read it. It said that it was shutting down because it detected a problem and was trying to prevent any damage to my computer. It said that if I had never seen the message before, to just restart, but if I had seen it before to follow a bunch of steps which I don't completely understand...
To check if had adequate disk space (--adequate for what?)
If a driver is identified in the stop message (which I don't know if one is) I need to disable that driver (which I don't know how) or check with the manufacturer for driver update (I'm guessing it means on Toshiba's website?)
Change video adapters (once again...no clue?)
It also tells me to check the hardware vendor for BIOS update (don't know what that is or how to do it)
Disable BIOS memory options such as caching or shadowing (still don't know)
Then it tells me how to get into safe mode if I need to do it that way.
Then it says this:
STOP: 0x0000008E (0x0000005, 0x8D8497C0, 0xA6EFB6B8, 0x00000000)
igdKmd32.sys - Address 8D8497C0 base at 8D803000, DateStamp 4851d0b0
And then says a bunch of stuff about dumping memory something to disk or whatever.
So ya...if anyone knows what any of this means and can help me out...PLEASE DO!
PS. A BETA version of Mozilla Firefox is my default browser right now since in the past I have encountered issues with Internet Explorer

Hi
To be honest I never had any problems watching the videos from youtube.
You will need to have the flash player plugin and I noticed that new flash player version has been released. So check this
Update the flash player
Back to BSOD issue it can happen due to hardware or software issue but in your case I think its software related.
If the flash update does not help, recover the unit again and test it with new fresh preinstalled OS.

Why is Encore 6.0 giving me the "blue screen of death" when I try to create a menu?

When I purchased my student edition 6.0 (which I love by the way), Encore did not have any of the libraries loaded up on it. After reading some discussions, I downloaded the missing folders.
Now, when I try to create a menu, my computer shuts down and gives me "the blue screen of death" as they call it (a blue screen with white writting, counting up to 100%, and saying Windows is preparing to crash...or something about the hard drive crashing....I can't remember because it goes off the screen so quickly).
I've done this several times - my computer only does this when I try to create a menu in encore, and not in any other part of encore. It hasn't happened in any of the other programs either (Premiere Pro and Audition are the only other programs I have used so far), or any other times I have my laptop.
Because of this, I am not too concerned since it seems Encore is the problem. However, I do not want any other problems to escalade from this either.
Am I doing something wrong? Can someone please help me? I'm working on my Senior Thesis (a video) this year, and I really really cannot afford to have my computer crash on me.
Please and thank you,
Meghin

Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169
-and an Encore fix http://forums.adobe.com/thread/1060443

Blue screen error when I plug my iphone into my PC

HELP!!! I just got an iPhone, and now when I try to plug it into my PC, my PC crashes and gives me a blue screen error. I have made sure I have the latest updates of itunes, and Windows, and I am just not sure what to do . . . Can somebody please walk me through this? Everything I read talks about syncing, but that requires that the computer doesn't crash the minute I put the iPhone into the USB jack . . .
I did sync it once fine, downloaded a few apps, which was also fine. Now I took some photos with my iphone, and wanted to put them on my computer, but it won't even let me plug it in. Please HELP!!!
Thank you.

My System also crahses from time to time, on connecting the iPhone. I have also checked this thread (http://discussions.apple.com/thread.jspa?threadID=1174035) but I dont have a logitech CAMERA. I do have a G15 Keyboard and a mouse but nothing else. THe Problem with the crash is: My pc neither shows a bluescreen nor is rebooting. Means: direct power off, like I would have pulled out the cable...
very weird....plase help me, if you have any Idea.

Windows 7 Blue Screen of Death from Apple Wireless Keyboard?

I've installed Windows 7 with Boot Camp 3.0 drivers on my Mac mini, and I suppose overall, I'm enjoying it. However, I'm getting a blue screen that seems almost random. Keyword is almost.
I've got my Apple Wireless Keyboard and Mighty Mouse paired, and they're both working well, however, I do believe I am getting some blue screens from my wireless keyboard.
It seems, at random intervals (usually when I haven't touched the keyboard and mouse for awhile) I get an IRQL blue screen and no information about what's exactly causing it. For example, if I'm sitting in the other room listening to music for awhile, and I come back and press the "next" media button on my keyboard, it'll crash and give me the blue screen. However, I've also tried pressing another random button (shift) to "wake" the keyboard if it had fallen asleep, which also results in a blue screen. The blue screens ONLY show up when I give input via the wireless keyboard. Or, if I leave the computer on overnight to download a file or something, the screen will sleep (which it should) then I'll press a button on the keyboard, the screen will stay asleep, and the computer will restart. Which is just a hidden blue screen I'm assuming.
I've tried reinstalling Windows (Clean/fresh install of course), installing/uninstalling drivers, pairing and re-pairing. I've also removed unnecessary/non-Windows 7 drivers that were installed with Boot Camp.
Outside of this blue screen, I am quite impressed with Windows 7. I just can't figure out what's going on. Is there any place I can get a description of what's causing this crash? Does anyone know what's happening or know a solution to this?
Thanks in advance, if you need more details, please ask.

Experiencing exactly the same symptoms, bugcheck/bluescreen only when touching the Apple wireless keyboard after a period of inactivity.
I have an 20" iMac, just upgraded Leopard -> Snow Leopard latest minor version and updated to Boot Camp 3.1 hoping they provided a fix, but the driver at fault (keymagic.sys) doesn't look updated and the issue is still there
Hopefully someone from Apple dev support is reading this, here's all the info I could squeeze from the crash dump:
=============================================
* Bugcheck Analysis *
IRQLNOT_LESS_OREQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff80002e33440, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002e33440, address which referenced memory
Debugging Details:
READ_ADDRESS: fffff80002e33440
CURRENT_IRQL: 2
FAULTING_IP:
nt!IoIsWdmVersionAvailable+0
fffff800`02e33440 80f906 cmp cl,6
CUSTOMERCRASHCOUNT: 1
DEFAULTBUCKETID: VISTADRIVERFAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
TRAP_FRAME: fffff88002f2f0c0 -- (.trap 0xfffff88002f2f0c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88002f2f100 rbx=0000000000000000 rcx=0000000000000006
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002e33440 rsp=fffff88002f2f258 rbp=fffff88002f2f2b0
r8=fffff80002a4f000 r9=0000000000000000 r10=fffffa80027f3010
r11=fffff88002f2f208 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!IoIsWdmVersionAvailable:
fffff800`02e33440 80f906 cmp cl,6
Resetting default scope
LASTCONTROLTRANSFER: from fffff80002ac0469 to fffff80002ac0f00
FAILEDINSTRUCTIONADDRESS:
nt!IoIsWdmVersionAvailable+0
fffff800`02e33440 80f906 cmp cl,6
STACK_TEXT:
fffff880`02f2ef78 fffff800`02ac0469 : 00000000`0000000a fffff800`02e33440 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff880`02f2ef80 fffff800`02abf0e0 : 00000000`00000000 fffffa80`03375d90 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`02f2f0c0 fffff800`02e33440 : fffff880`04a02e5d fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 : nt!KiPageFault+0x260
fffff880`02f2f258 fffff880`04a02e5d : fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 : nt!IoIsWdmVersionAvailable
fffff880`02f2f260 fffffa80`02a3add0 : fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc : KeyMagic+0x2e5d
fffff880`02f2f268 fffffa80`027e8b40 : fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 : 0xfffffa80`02a3add0
fffff880`02f2f270 fffffa80`02a3add0 : 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 : 0xfffffa80`027e8b40
fffff880`02f2f278 0000057f`fd5c5228 : fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 : 0xfffffa80`02a3add0
fffff880`02f2f280 fffff880`04a02dfc : fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 : 0x57f`fd5c5228
fffff880`02f2f288 fffff880`00e5a2a7 : fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 00000000`00000010 : KeyMagic+0x2dfc
fffff880`02f2f290 fffff880`00e30c9b : fffffa80`027fd9d0 fffffa80`027fd9d0 fffffa80`027fd9e0 fffffa80`027fdc01 : Wdf01000!FxRequestBase::CompleteSubmitted+0x1f3
fffff880`02f2f310 fffff880`00e30dc4 : 00000000`00000002 fffff880`04bbcff7 00000000`00000000 fffff880`04bbcff7 : Wdf01000!FxIoTarget::RequestCompletionRoutine+0x1cb
fffff880`02f2f380 fffff800`02aab935 : 0d780da4`0da40dd4 fffff880`02f2f420 0d440d78`0d780da4 fffff880`04bbeb52 : Wdf01000!FxIoTarget::_RequestCompletionRoutine+0x3c
fffff880`02f2f3b0 fffff800`02ac3516 : fffffa80`027e8f2b 00000000`00000000 fffffa80`027fdc70 fffffa80`027e8b40 : nt!IopUnloadSafeCompletion+0x55
fffff880`02f2f3e0 fffff880`04b62323 : fffffa80`027e8b40 00000000`00000000 fffffa80`02655c10 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
fffff880`02f2f4c0 fffff880`04ba24be : fffff880`02f2f590 fffffa80`027e8b40 00000000`00000000 fffffa80`0294f600 : bthport!BthCompleteRequestEx+0x5b
fffff880`02f2f4f0 fffff880`04b9c8d4 : 00000000`00000000 00000000`00000001 fffffa80`02a50c40 fffff880`02f2f6e0 : bthport!L2Cap_CompleteReadIrpList+0xc2
fffff880`02f2f540 fffff880`04b70732 : fffffa80`03349530 fffffa80`0294f5f0 fffff880`00410001 00000005`00000002 : bthport!L2CapInt_ProcessReadBip+0x430
fffff880`02f2f6d0 fffff880`04b70078 : fffffa80`0267f230 00000000`00000000 fffffa80`029b5402 fffffa80`02670000 : bthport!HCI_ProcessAclReadBip+0x642
fffff880`02f2f7a0 fffff880`04b988d9 : fffffa80`0267f230 fffffa80`03036702 fffffa80`026c0ab0 00000000`00000000 : bthport!HCI_ProcessAclRead+0x214
fffff880`02f2f810 fffff880`04b66201 : 00000000`00000000 00000000`00000000 00000000`00000056 fffffa80`026c0ab0 : bthport!HCI_ProcessMpBip+0x61
fffff880`02f2f880 fffff880`04b4d327 : fffffa80`0294f4f0 fffffa80`026c0ab0 00000000`00000000 fffff800`02ac59fa : bthport!BTHPORT_RecvMpBip+0x41
fffff880`02f2f8d0 fffff880`04b5399f : 00000000`00000000 fffffa80`00cd3910 fffff880`04b56388 fffffa80`00cda820 : BTHUSB!BthUsb_ReadTransferComplete+0xf7
fffff880`02f2f930 fffff880`04b53c31 : 00000000`00000003 fffff880`02f2f9f0 fffffa80`00ca2d00 fffffa80`00000012 : BTHUSB!UsbWrapWorkRoutine+0x17b
fffff880`02f2f9b0 fffff800`02ac3516 : fffffa80`00cd3bdb 00000000`00000000 00000000`00000000 00000000`00000000 : BTHUSB!UsbWrapInterruptReadComplete+0x1dd
fffff880`02f2fa40 fffff880`044135d9 : fffffa80`01e81050 fffffa80`00cda700 00000000`00000000 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
fffff880`02f2fb20 fffff880`04413ab7 : fffffa80`028ef502 fffffa80`00cd3910 00000000`ffffffff fffffa80`01e81ea8 : USBPORT!USBPORTCoreiCompleteDoneTransfer+0xa15
fffff880`02f2fc00 fffff880`0441164f : fffffa80`01e81ea8 fffffa80`01e811a0 fffffa80`01e82040 00000000`00000000 : USBPORT!USBPORTCoreiIrpCsqCompleteDoneTransfer+0x3a7
fffff880`02f2fc60 fffff880`04402f89 : fffffa80`01e81050 00000000`00000000 fffffa80`01e81e02 fffffa80`01e81ea8 : USBPORT!USBPORTCore_UsbIocDpcWorker+0xf3
fffff880`02f2fca0 fffff800`02acc5dc : fffff880`02f07180 fffffa80`01e81ea8 fffffa80`01e81ec0 00000000`00000000 : USBPORT!USBPORTXdpcWorker+0x1d9
fffff880`02f2fcd0 fffff800`02ac96fa : fffff880`02f07180 fffff880`02f11f40 00000000`00000000 fffff880`04402db0 : nt!KiRetireDpcList+0x1bc
fffff880`02f2fd80 00000000`00000000 : fffff880`02f30000 fffff880`02f2a000 fffff880`02f2fd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb
FOLLOWUP_IP:
KeyMagic+2e5d
fffff880`04a02e5d ?? ???
SYMBOLSTACKINDEX: 4
SYMBOL_NAME: KeyMagic+2e5d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: KeyMagic
IMAGE_NAME: KeyMagic.sys
DEBUGFLR_IMAGETIMESTAMP: 49c160ec
FAILUREBUCKETID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
BUCKET_ID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
Followup: MachineOwner
---------

5.0 gives me a blue screen

Similar Messages

Maybe you are looking for