5,000 photos there, just no thumbnails...Any HELP appreciated!!

Hello. I recently installed iphoto 09 from ilife. When I opened it, all of my photos were grey square thumbnails. I might have done something wrong in the installation, however, if I click on a grey square, the photo does come up. It is like the thumbnails got lost somewhere. Any help would be appreciated and thank you so much for your time.

Hello Mr. Devlin I was hoping you would take my iphoto challenge on. Thank you.. I have started the process you suggested. When the dialogue box opened, (after I copied the "iphoto recovered library"file to my external hard drive) I selected the first option, which was rebuild "the small thumbnails" and when it was through there was no change, no new thumbnails to replace the greyed squares. Closed iphoto and called up the dialogue box again and selected the 2nd option, rebuild all the thumbnails. I will keep you posted if it is successful or if not. Again, thank you for your time. Melody

Similar Messages

TS1550 using Seagate 2.0 Go Flex .... initial back up just stops at about 2gb .... no message, just stops! any help out there??

Using Seagate 2.0 Go Flex .... initial back up just stops at about 2gb .... no message, just stops! any help out there??
I've done the reformat thing .....

On another post I saw the suggestion to download EasyFind and use that to search for any Seagate software on my Mac and then remove it.
I did that, removed anything that even mentioned Seagate and .... it worked!
It has been working fine all day and allowed me to shut down the computer without freezing.
So ...... so far so good.
If anyone is about to use a Seagate GoFlex then don't download any of their software!!!

Whenever I try to open an app on my Mac it just bounces on my dock and then settles. At first it bounced the disappeared, and then I had to reinstall it, but now it just bounces. Any help?

Whenever I try to open an app on my Mac it just bounces on my dock and then settles. At first it bounced the disappeared, and then I had to reinstall it, but now it just bounces. Any help?

Try one or more of the following:
> Restart Your Computer
> Uninstall and Reinstall iTunes
> Reset iPod (nothing will get deleted)
> Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer.

Hi, WWhen I turn on my mac pc, enter my account password my page wont load up , I can access the internet through my families account but not mine. There is a message telling me I need to delete files but the page won't load anything. Any help appreciated

Hi
When I turn on my pc and log into my account there is a message telling me I need to delete files. But the page won't load up anything to allow mw to do this. I am concerned I may have lost all my personal info.
I can log into other family members accounts but not mine.
Any help appreciated
Thanks

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Does anyone know if there is any difference at all in the display between the 4 and the 4s. I use my 4 with no problems but have issues with the 5 - makes me feel ill. Any help appreciated before I make an expensive mistake

Can anyone tell me if there is any difference at all in the display between the 4 and 4s. It appears they are the same from the specs but I dont want to make an expensive mistake. I can use the 4 with no problems but the 5 makes me feel ill and I am hoping I can upgrade to a 4s with no issues. Any help appreciated.

In a technical sense, the differences between the displays on the iPhone 4 vs 4s are vast. I'm mean, they are both attached to 70 - 90% of the internal components and far from interchangeable. There are no differences however, that are noticeable by the user.

I have a 2009 macbook pro and my email account is doubling every message I get. I've had it for about 3 weeks and this just started. Any help?

I have a 2009 macbook pro and my email account is doubling every message I get. I've had it for about 3 weeks and this just started. Any help? Every time I get one email, I get 2 copies of the same message.

This discussion may prove useful:
http://forums.macrumors.com/showthread.php?t=88279

Restore from time machine does not list all my backups. I know they exist but there dates are not present on the restore list. Any help appreciated.

Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?

Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens.

Any help appreciated - iTune compression problems

Hi there,
Just bought a second hand iPhone 3g yesterday that has to last me out 5 months before my contract is up and I can hopefully get a 5 if it's out (touchwood).
Transferred some music from iTunes to my iPhone and on the phone speakers it sounds fine, however when I put my headphones into the jack it's incredibly distorted and sounds like it's suffered far too much compression.
I'm guessing this is possibly a headphone jack related problem as opposed to a compression issue? Tried converting files to AAC but made no difference
Any help appreciated!
Thanks
Dan

FYI - the iPhone includes a single external speaker. The opposite grill that appears the same is a microphone.
If this were a compression or format issue, the same would occur when playing the music via the speaker. Using earbuds has no affect on the compression or format. More than likely this is a headphone jack related problem or there could be a problem with the earbuds being used.

Any help appreciated - - on barefoot ski image optimization

Any help appreciated.
Working with Photoshop 7.0 trying to color correct and optimize an image of my son barefooting to prepare for giant vinyl print to create a stand up cut-out on a foam board.
I will attach 2 downsized images for comparison.
As you can see one image has nice smile but no sunlight and other image has great sunlight but no smile.
I need to optimize for CMYK printing the smiling image. I know a bit about levels, but don't know what to change for midtones, highlights, etc. to try and correct this smiling image as best possible.
Unfortunately I did not set up the Canon EOS Xsi camera to save RAW images at 17 megs and the boat owner is not wanting to go out again for another photo session. Original image is 4.5 megs jpg which I crop image, adjust histogram by "sliding in the sides", convert to CMYK, sharpen unmask at 98%, increase brightness with middle slider in histogram, expand size up to 72 inches tall by 54 inches wide and also set to 150 pixels per inch (may try 300), save as LZW TIFF.
After that image is like 400 megs, then import into illustrator CS and tile out just the face of a 72 inch X 54 inch and it's amazing pretty clear for 100:1 file size increase (13 X 9 inch sheet).
I have access to CS4 on Mac only - - don't know if CS4 Mac file will have any big advantages over my 7.0 in Windows . . .

Hmmmm, wonder if anybody ever created a plug in for photoshop that allowed you to add more lighting to an image, as in light coming from behind the photographer - - like sunlight effects ?

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

A mate has an iphone 4 as a work phone and needs to get all data incl messages onto an old iphone 3 as he is leaving. Is this possible, any help appreciated

A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
Robbie

You won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out). And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G. He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup. Unfortunately, there isn't any way around it.

When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!

When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!

Hey there Dan256162,
I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
iTunes: Possible iTunes Store errors - Apple Support
http://support.apple.com/en-us/HT203174
And here is the linked troubleshooting article that will help you resolve the issue:
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
http://support.apple.com/en-us/TS4123
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

I am trying to connect my ipad to the internet via wifi/3g wireless router/wireless dongle..it finds the router but not the dongle connected to it..any help appreciated

HI...just purchased a new ipad 2 16gb wifi only... Was also sold a 3g wireless modem so that i could connect it to my already owned wireless internet dongle.. upon trying to set it up i can get the Ipad to find the wireless router but thats it. When I plug my dongle into the wireless router as i would with my laptop the light goes green as it does when connecting the laptop but thats about as far as I can get...any help appreciated...cheers Brett

There are 3G Moblie Broadband Router i.e. a 3G dongle connected to a 3G router
http://www.aztech.com/prod_3g_hw550.html

I have downloaded Safari on to my PC( I recently bought an iPad and want some compatibility) However when I try to open and import bookmarks to Safari on my PC it shuts down the program. Any help appreciated.

I now own an iPad and want to load bookmarks from Firefox on my PC to my iPad. I have downloaded Safari on to my PC and tried to import the bookmarks from Firefox but every time I try to open bookmarks in Safari it shuts down Safari. As I siad I eventually want the bookmarks on my iPad. Any help appreciated.
KJ

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

Urgent help needed.....any help appreciated....

q, Design and implement a java class called statistics that computes the mean, median, standard deviation. Design and implement a java application called statisticsDriver that generates a list of 50 integers (generated randomly) and prints the statistical measures which are calculated using the Statistis Class. Assume there will be no more then 50 input values. Compute all statical values as floating values.
The above was the question, and below is what i have done so far for the mean part, but it seems to have errors, any help???
p.s I am also confused what it means by driver class, and do i have to do individual classes for the different statistical measures....please helppppp !!!!!!!!!!, any help would be appreciated...thanks.
The class say Mean contains the following method:
public static double mean(double[] data)
double sum=0.0;
for (int index=0; index sum=sum+data[index];
sum=sum/data.length;
return sum;
The driver for this class:
public static void main(java.lang.String[] args) {
double[] myData={2,5,4,6,7,13};
System.out.println("The mean of myData");
System.out.println(Mena.mean(myData));

This is my method to work out the mean,median and mode of a set of numbers.
But what i need to do is find the mean, median and mode from a driver class, which generates a list of random numbers, no more then 50. I don't know where to fit this in my method...please help!!!!!!
main:
public static void main(String[] args) {
int[] mainArray = {2,3,6,6,6};
//outputArray( "Original Array: ",mainArray );
System.out.println("average is " + mean( mainArray ));
System.out.println("median is " + median( mainArray ));
System.out.println("mode is " + mode( mainArray ));
//mean
public static double mean(int[] mainArray) {
int sum = 0;
for (int i = 0; i < mainArray.length; i++) {
sum = sum + mainArray;
double average = sum / mainArray.length;
return average;
//median
public static int median(int[] mainArray) {
//double sortList = sort(mainArray);
final int EVEN_NUMBER_OF_ELEMENTS = 0;
int result = mainArray.length % 2;
int median = 0;
// Definition: Median is the Middle number in an odd number of entries array
// Median is the avg of the two number in the center of an even number array
if (result == EVEN_NUMBER_OF_ELEMENTS) {
int rightNumber = mainArray.length / 2;
int leftNumber = rightNumber - 1;
median = (mainArray[rightNumber] + mainArray[leftNumber]) / 2;
else { // Odd number of items, choose the center one
int rightNumber = mainArray.length / 2;
median = mainArray[rightNumber];
return median;
//mode
public static double mode(int[] mainArray)
int mode = 0;
int elements = 0;
int tempMode = mainArray[0];
int temp = 1;
int x;
for( x = 1; x < mainArray.length; x++)
if(mainArray[x-1] == mainArray[x])
temp++;
else
if(temp > elements)
tempMode = mainArray[x-1];
elements = temp;
temp = 1;
else
temp = 1;
if (temp> elements)
tempMode = mainArray[x-1];
mode = tempMode;
return mode;
any help appreciated..

5,000 photos there, just no thumbnails...Any HELP appreciated!!

Similar Messages

Maybe you are looking for