5.04HDV capture-no way to listen to audio to mark in and out?

First time capturing HDV footage and don't get audio on desktop speakers. Audio direct to monitor from deck is way out of sync with picture in capture screen. Not like DV settings that allow you to click on audio to hear in capture mode. Have been through all the setups I can find of without results. Capturing in Firewire. Meters in capture show audio is there and playback of captured material is ok but batch dig. is a horror this way. Dif. setup somewhere? ED.

Yes I know.
The thing with markers (M) is that these are always placed on the primary storyline, except if you selected a clip in the non-primary storyline. So I don't know why you must first select the Range Selection tool to make in's and out's. Why don't it works just as the markers do.

Similar Messages

What's the Best Way to do an Audio Fade-In or Fade-Out

I'm trying to figure out the best way to do an audio fade-out, other than placing a keyframe at the start of the fade, them placing a keyframe at the end of the clip and dragging it down to zero. It's hard to quickly place a keyframe at the end and know for sure it's at the very end.
In previsous versions of Premiere, I had trouble plading a keyframe and keeping it at 100%, just by placing a keyframe it would also adjust the level most of the time. This seems to be less of a problem in CS4, but is there a way to be certain of inserting a keyfram at the current level. (A quick way.)
In general, there's got to be a quicker way to do a fade out or in!
I have Premiere Pro CS4 with a Matrox RTX2 card.
There are only three audio transitions:
Constant Gain
Constant Power
Exponential Fade
I can't seem to make any of them work, cannot drag them over to an audio clip.

Eddie:
I had seen those instructions before.
They say: To fade out a clip’s audio, drag an audio transition from the Effects panel to a Timeline panel so that it snaps to the Out point of the audio clip.
When I try to drage one of the three avaialable audio transistions to a clip:
Constant Gain
Constant Power
Exponential Fade
Nothing happens.
WAIT.
I think I've got it now. The "Snaps to the Out point" part. Damn. There was no visual feedback during the drag to indicate something was happening.
OK. (Whew.)
Thanks!

No mark in and out points at batch capturing

I have created logged clips to my browser window but, noticed that the IN and OUT points say NOT SET.
Is this normal?
As I create the logged clips for batch capture shouldnt I see the IN and OUT times?

That's normal. When you set In and Out in the Log & Capture window, those points become Media Start and Media End in the Browser. And In and Out are left as Not Set.
The rationale is that once you've captured, you'll review your clips and place In and Out points more precisely. In case you do want to stick with Media Start and Media End as your In and Out, simply load the clip into the viewer and press X on your keyboard - that will set your In and Out (at Media Start & End) for your clip.
Now - you know there had to be one caveat - the only time this is not the case is when you check the box to Add Handles in the Batch Capture dialog. In that case, when FCP captures the clips, it extends the Media Start and Media End by the handle amount and uses the In and Out that you specified during logging as the In & Out for that clip in the Browser.

Can i listen to audio on my ipad and apple tv streaming at the same time to be able to use the dj app?

Help

Just start playing music in the Music app and switch to another app. Either tap the home button to go back to the home screen to find another app, or swipe up from the bottom of the screen if you have Mutlitasking gestures enabled in Settings>General>Mutlitasking Gestures>on - or swipe from screen to screen to get to another App.
Yoy can listen to Pandora Radio, Tuned In Radio, iHeart Radio - any music or radio app while you use another app.

Setting in and out markers for capturing.

i am learning final cut pro, and have also purchased a new camera. I was under the impression that a tape based camera goes through wear on the heads the more you use it... having said that i just finished chapter eight of capturing video in final cut pro, and am under the impression that i have to watch the video, set my in and out point/ set markers to select the footage to be used, and then it has to play the footage again to capture it?..... so your camera is always going to have to go through the wear of recording original footage,rewind footage...play footage to mark in and out points, and the a third time to capture is this correct? also are a lot of people using these expensive formatting devices that you plug into your camera so when you record your original footage it records on the tape and on this device so you can access the device and not put so much wear on the camcorders tape heads?

sounds like you are very efficient in your work.
You have to be if you want to get anything done in a timely manner, and if you want to be able to find footage quickly.
I thought that i should do that after the fact, but then i thought that in cases of collecting a lot of rough footage that there may be a several areas of footage you dont want to use that you are asking the camera to play when it doesnt need to.
Exactly why logging your footage is so important. Not only do you see what you have, but you can make sure you don't capture stuff you don't want or don't need, and that saves tons of space. Plus the mere fact you are logging, capturing and organizing your footage means that you are getting more familiar with what you have. This is of MAJOR importance to an editor.
I am going to be doing this for a living
Then learning good editing habits early on is a must.
Lemme take this moment for shameless self promotion, and point out my Tutorial DVD on how to be organized in FCP:
Get Organized in FCP
(I may receive some form on compensation in posting the above link)
Start out organized and you'll find that you edit much faster and more efficiently.
Shane

Some ways to lip sink audio and video ?

Have shot a song of a music video ,audio is there during the shoot also....
now what can be a nice way to match the audio of the footage and the real WAV audio clip on the audio track in FCPx ?
I want to place the dance step clip in a close on the top of the....clip with same dance step in the long shot to see how it would look
if I could exactly place the two similar audios on each other I would almost match the lip sink....
but since waveforms are not distinctly visible I can't even take help of that...
Can you suggest some ways of placing shorter shots on long shots to see the result or will I have to sink them purely on my visual judgement ?

Select both clips, and go: File: New Mulitcam.. Bam!
Make sure to give the clips seperate Camera Name and/or Angel.
Make sure 'Use Audio' is selected.. but that is the default.

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Best Way to Listen to my Digital Music On My Stereo?

What is the best way to listen to my digital music library on my home stereo? Is one way better than another? I am interested in making sure there is no loss of sound quality. What are some of the best options for me?
Thanks

I guess that would be one way to go but I guess I want to know is that the best way to go?
You need to be clear.
Where is your digital music library now?
You could burn audio CDs or MP3/AAC CDs, burn a DVD MP3/AAC files, play from your computer or iPod, add a network device such as Sonos, add an Airport Express or other networking device, connect the audio from your computer to the stereo, etc.

Is there any way to listen to the radio with wireless earbuds?

I just bought a iPod nano 7th generation for my husband along with some wireless earbuds. He likes to listen to the radio a lot but he has to plug in headphones in order to get a radio signal. The purpose of the wireless earbuds was to help eliminate the cord. Now we aren't able to receive a radio signal. Does anyone know a way around this?

I use the Jaybird and Ultimate Ears 9000 Bluetooth headphones with my 7th gen Nano. Works fine. What models are you attempting to use?

Is there a way to listen tracks from my harddrive and delete them directly?

Hello Everybody,
I have a simple thing i like to do, but i can't figure out how to do it..
I have a lot of music on my external harddrive, and i want to listen to a track and if i don't like it i want to delete it.
I don't like using itunes, because a lot of tracks are not part of an album and then i can never find them again. I use traktor to browse to my folders, but from that program i can't delete the tracks. Then i have to search for the track in finder..and delete it from there.
Is there a way to listen to my tracks from my harddrive and delete them on the spot?
kind regards,
Marco

Rocam wrote:
i cannot delete a track from itunes and directly from my harddrive at the same time...
Well you can place it in the Trash, then delete the Trash all at once.
Right click on the song in the Library and select Delete.
This next window can be prevented to show again by checking the Do Not Ask Me Again box
Bam, click the Move to Trash and it's in the Trash,
when your done for the day, before you remove any media, you click Finder > Empty Trash and they are all gone at one time.
This method is better in case you make a mistake, you can grab it out of the Trash and put it back.
I think the Delete key on the keyboard is even faster than the right click selection, you'll have to find out.
You also can use something like QuickKeys and scheduale a sequence of mouse click events so a simple keystroke like Control D can delete the song to the Trash.

Alternative ways to listen to songs on E73

Hello, I am trying to figure out a different way to listen to songs on my E73 because the player that comes on the phone does not allow you to fast forward, this is especially frustrating when listening to a podcast and accidentally bump the wrong button which makes the podcast start over...
is there a way to fast forward that I dont know about, or another way to listen to songs & podcasts?
Thanks in advance

Bumping this up the forum, please assist

Best way to listen in the car?

Hi,
Which gadget will help me listen to my shuffle in the car? I have tried the Xtreme mac and I get a lot of static and strange noises.

Hi Wendy,
Do you have a cassette player in your car? If yes, a cheap way to listen to your Shuffle in your car is to purchase a cassette adaptor such as the one listed below:
http://www.amazon.com/gp/product/B0001YXWNM/102-7215459-7976940?v=glance&n=17228 2&v=glance
I have one of these and they are great! I personally prefer them over the wireless radio tuners.
Stu

Is there any way to listen for OS-commands like LINUX/UNIX "kill myApp"?

Hello, world! ;)
I would like to get help on the following problem:
Situation:*
Implementing my first server-daemon I was wondering if there is any way to listen for OS commands/events affecting the application.
One particular handling I intend to implement is after an OS termination command (like *"kill myDaemon.jar"* on LINUX/UNIX) to shut down the daemon.
This would be really helpful, because in this way I would not just shut down the daemon brutally but being able to handle an event like this to shutdown the Thread pool, send all connected peers that the server/daemon will be down for a while, close all connections ...
Need help:*
Am I completely forgetting something which solves this problem really quick? :D
Is there any Listener Interface which I can use to achieve this?
Is maybe the JVM/JRE handling this and running garbage collectors?
Is there any site/tutorial/... focusing on problems like this?
Thanks in advance for any help on this subject!
JAVAnetic

Thanks, this was indeed very helpful.
I implemented a shutdownHook and it works like I hoped it would:
    Runtime.getRuntime().addShutdownHook(new Thread(new Runnable() {
      @Override public void run() {
        // shut down commands
    }));After typing *"kill process_ID"* in a terminal the shutdownHook is invoked (like mentioned before) and the shut down commands are executed.
Works fine.
Am happy. :D

Is there any way to listen to music WITHOUT using the speakerphone or headphones?

I listen to streaming talk radio in my car, I usually have drive to and walk in and out of several office buildings throughout my day. I would like to be able to just put my BB up to my ear and pretend like I am listening to someone talk on the phone, when I'm really listening to the radio. Is there any way to do this? I hate having to fumble around with headsets every time I stop, and obviously I cant walk through a office building with the loud speakerphone/built in speaker blasting.

Sure there is.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hey my iPhone 5 headphone jack bent and I can only listen in one ear now I straightened it and now I have to push it a certain way to listen to music do u think apple can send another pair

Hey my iPhone 5 headphone jack bent and i can only listening one ear and now I straightened it and I have to push it a certain way to listen to music does anyone know if apple can send me another pair

If you purchase another pair, sure they will ship them to you. Accidental damage caused by you is not covered under warranty, so they will not replace them for free.

5.04HDV capture-no way to listen to audio to mark in and out?

Similar Messages

Maybe you are looking for