5.1.3 Not Functioning Right After Master Reset...

A pop-up that would always disappear quickly has been going on in Safari for some time now, so I thought if I reset everything in Safari and emptied the cache it would fix it...
However, now certain websites such as Yahoo! and Amazon don't function right and are just messy. Some websites just get a 404 error...it's not my internet since in all of the other browsers on my Mac see them fine like they always have. How can I fix this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

Similar Messages

I back up my files by using back up iphone function.but after i reset

i back up my files by using "back up iPhone" function.but after i reset and restore from backup for my iphone 4,all my apps were gone.what can i do?i found that the apps in not in itunes sync,how to restore back all my apps?i have not turn off my my imac from whole entire process,but iphone is not connected already.
please help,thank so much.

on your iphone - appstore - update - purchased - all/or not on this phone - select either tab, to download app tap on the cloud on the right hand side of the app.

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Cisco 7941G phones will not boot up after factory reset.

Cisco 7941G phones will not boot up after factory reset.
The following happens.
1. Speaker light lit (Green)
2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
3. Saw Cisco logo with a Java Powered page.
4. The whole thing loops again and again...
I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
Please help.

How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
Sounds like too many devices trying to use TFTP at once.

HT5622 Why is my Apple ID or password not working anymore after I reset my password?

Why is my Apple ID or password not working anymore after I reset my password?
It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

IOS 7 music app does not display artist pictures and has incorrect album art after master reset.

Strange issue here. I did the update from iOS 6 to iOS 7, after I did the update, I noticed my synced music has just a random photo of the artist / group, that seems to be downloaded from the iTunes sites, because these pictures of the artist/group is not my album artwork.
I did a master reset on my device because I wanted to start from a clean slate, and set it up as a new phone. I went through and adjusted all of my settings and synced my music back on via iTunes, now its not showing these pictures any longer, infact, the strangest issue of them all.. is now when I view artists, the album that I synced now has a complete different album artwork picture that is not related to that album.
I am at a loss, my iTunes is extremely organized, I have everything configured to be 100% accurate for track names, artist, album, and album artwork.
Anyone have any input here? It only screwed up after the reset I did. This has to be a bug or something.

SiMooew469: Thank you! After countless wasted hours messing with this, your solution was the only one that worked! After setting up a few phones "as new" I noticed all the artist images would appear (for those that have one) even with my Match turned on. I could not duplicate it on my restored-from-backup iPhone5S, as I would get a mix of the images and album art, even for those artists that have profile photos on the as-new setups. I couldn't afford to lose all my text messages, etc. that come with restoring a phone as-new, so I tried about everything else under the sun: I tried logging in-and-out of my Apple ID, toggling Match on-and-off, I even deleted iTunes_control folder using iExplorer on a Windows machine. Nothing worked.
Here's what finally did:
If you don't have it set this way already, toggle "Group By Album Artist" in Settings->Music. For some reason that makes a difference for some artists in your library that appear when album artist is set to "Various Artists" or something other than the track's artist. Logout of your Apple ID. Log in with any other Apple ID. Open the Music app and watch all the artist images load in the Artisits tab. Once it is done, logout of the other Apple ID and login with your regular Apple ID. Finally, all the artist images will remain. Those artists that do not have a profile photo with iTunes will still show album art, which is by design. Hopefully Apple will keep updating that database.
Incidentally, it's a bit odd that those profile photos don't appear in the Artists view in iTunes 11...or am I the only one?

Rpt-files do not function anymore after deploying to a different database

first: I use CR. 10.2.3600.0 and Asp.NET with Visual Studio 2005
I developed my reports against a Develepment-Database and everything worked fine.
Then, I published my Website with the reports.
Also I made a backup of my Develepment-Database to become the Productive-Database.
All pages of my website function well (database-queries etc.), but when I try to call one of my reports a queerish error message occurs:
"This field name is not known. Error in File C:\WINDOWS\TEMP\...\{...}.rpt: Error in formula. '{xyz.ds_id} = {?@ds_id} and '."
I mean, the database is the "same" as before?!?
(BTW: the logon to the database is set at runtime and is ok.)
Why do the reports not function anymore?
The only workaround I found is to open the report in Visual Studio 2005 again and select "Crystal Reports/Databases/Check Database" against the Productive-Database.
After that the report works! BUT THIS COULD NOT BE THE SOLUTION, this means that I cannot publish my website to a different database on a customers network!!!

I tried this:
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        ' Get Location of Database from web.config
        Dim Location As String = String.Empty
        Try
            For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                myTableLogonInfo.ConnectionInfo = myConnectionInfo
                myTable.Location = myConnectionInfo.DatabaseName & ".dbo." & myTable.Location.Substring(myTable.Location.LastIndexOf(".") + 1)
                myTable.ApplyLogOnInfo(myTableLogonInfo)
            Next
        Catch ex As Exception
            Me.LabelError.Text = "(SetDBLogonForReport) " + ex.Message
        End Try
    End Sub
and get the error:
ex.Message     "Fehler beim Laden der Datenbankinformationen.
Details: Die Datenbank-DLL 'crdb_query.dll' konnte nicht geladen werden.
Fehler in der Datei C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Fehler beim Laden der Datenbankinformationen"
which means in english:
ex.Message     "Error while loading database information.
Details: the databse-dll 'crdb_query.dll' could not be loaded.
Error in file C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Error while loading database information"
I debugged the code and recognized that the error appears while setting the .Location property...?!?
My DatabaseName is "Rezepturverwaltung".
Example 1 with a command:
Befor setting the Location of mytable the value of the prpperty is e.g. "command".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.command"
Example 2 with a stored procedure:
Befor setting the Location of mytable the value of the prpperty is e.g. "sp_GetData".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.sp_GetData"
What`s going wrong furthermore???
Edited by: Markus Schfer on Aug 31, 2009 9:56 AM

I get email already in use and I do not get confirmation emails even after master reset when trying to sync

I have tried all of the options in your support pages . I am not getting emails in order to reset my email. I did a master reset and it still tells me that my "new" email is in use. I do not get emails regarding recovery key change because the email stays the same . I can log in to your normal support page and I have just changed that password - that worked . . I assume that this password is not my master one . . When I did a master reset, where do I go or what do I do after that??
Struggling now for several hours . . .

This page does not help . . When I try to get a new key, it asks for me to log in - email address ok, but incorrect password. Request new password . . no email back to enable me to re-set.
I have tried a master reset . . that does not help either . .

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

Ipod 5 flash not working right after the update

Hi first off: my flash was perfect before the update so I think its not hardware?
- after the update yesterday today my friend and I tried to take a selfie in a dark place so we wanted to use the back camera and turned the flash as ON for our surprise it didnt work.
- we tried then to take something else's pic and the flash worked
- we tried the selfie again this time using the camera buttom not the volume's but didnt work.
- we used hipstamatic and VSCOCam then and it worked perfectly
- I tried turning on and off the device and did not work.
- I did a full restore through Itunes and didnt work.
anybody else having this problem?
any suggestion to fix it?

I contacted apple and they claimed it to be an obvious software bug, they said I had to take it to an assistence to get a new one intantly but as theres no assistence in my town and I cant go to nearby one I will have to just replace the stock app for a better one... once more I'm disapointed with apple.

Recover apps on symbian 60 v5 after master reset?

I have a Nokia nuron 5230. After a master reset can you recover the apps you had installed before? The memory card still shows the same free space, so the apps are still there somewhere, I jsut can't find them through the file organizer yet

I don't think I backed them up, unelss the phone does that automatically?
I had a bunch of stuff, like opera mobile. I know I can get them back from ovi store, but I wanted to see if there was a way to restore it without having to reinstall and set them up all over again.
There is also the issue of memory. When I did a master reset, the memory card contents did not seem to change. So that means I have a lot of unusable files on there? If I reinstall the apps will the go to the same folder and replace the old files? I want to be efficient with my memory usage.
I just installed x-plore and found some hidden folders in (E:\resource\apps and e:\system\apps). Including the opera mobile folder. But I didn't find some games. Where would java games be held? Also, these folders only have like 5 mb of memory, I'm looking for like 100+ mbs of stuff. I usualyl install apps through nokia pc suite. Does it download the .sis files to a temporary file somewhere and then install the apps?

Software updates after master reset?

Hi there,
I am about to use the original disc to reset my Mac Book to the original factory settings. Given that I purchased my Mac Book earlier this year and I have been done more than 10 software updates since purchase. My question is, after I reset my Mac Book, how do I repeat all the updates or do I simply need to do so?
Thanks for your time.
DC boy

Hello
After the reinstall, just click your blue apple and choose "software update". You have to have an internet connection of course... Your computer will be checked to see what updates are available. If it has been awhile, you will most likely have several downloads. They will be presented with titles and descriptions of the updates. Select the ones you want and download them!
And you are current!
hope that helps
-J

USB 2.0 not functioning properly after upgrading to 3.10.3-1 kernel

After upgrading to the 3.10.3-1 kernel USB 2.0 is not working anymore on my ASrock ION330 nettop.
I just did a system upgrade (including a kernel upgrade to 3.10.5-1), but the problem remains...
Here's the relevant messages that I extracted with journalctl -b
Aug 07 09:59:11 alcyone kernel: ACPI: bus type USB registered
Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver usbfs
Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver hub
Aug 07 09:59:11 alcyone kernel: usbcore: registered new device driver usb
Aug 07 09:59:11 alcyone kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 07 09:59:11 alcyone kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 07 09:59:11 alcyone kernel: ehci-pci: EHCI PCI platform driver
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: setting latency timer to 64
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: OHCI Host Controller
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: setting latency timer to 64
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: EHCI Host Controller
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: debug port 1
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: cache line size of 64 is not supported
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: irq 18, io mem 0xfae7ec00
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 3 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 4 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 5 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 5, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 6 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 6, error -71
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 7 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 8 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 9 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 9, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 10 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 10, error -71
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 3
Aug 07 09:59:11 alcyone kernel: usb 2-5: new high-speed USB device number 12 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 13 using ehci-pci
Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 14 using ehci-pci
Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 14, error -71
Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 15, error -71
Aug 07 09:59:13 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 5
Aug 07 09:59:13 alcyone systemd[1]: Found device MCP79 Ethernet.
Aug 07 09:59:14 alcyone kernel: usb 1-1: new low-speed USB device number 2 using ohci_hcd
Aug 07 09:59:14 alcyone kernel: usb 1-4: new low-speed USB device number 3 using ohci_hcd
I'm glad that keyboard and mouse are working properly under USB 1.0, but neither my usb-parport printer nor my USB external hard drive are recognised any more :-(
Any ideas how to solve this?? (I'd prefer not to downgrade the kernel)
Last edited by zilverling (2013-08-07 14:28:36)

I've discovered it's not that USB 2.0 is not working. 3 out of 6 usb ports/busses seem to work properly. The other three seem totally dead. Obviously this was not the case under kernel 3.9.9-1. Downgrading to kernel 3.10.2 made no difference.
In practical terms this means that I can use my printer and access my external drive if I use the right port/bus. And I could probably work around the problem by plugging a USB hub in one of the working ports. But I would be happy to get rid of the error messages and have all 6 usb busses working as they did before...

HP Photosmart 6510 B211a Not Functioning Correctly After Power Outage

Hi Guys,
I'm new to this forum but I'm hoping someone can help me.
I have an all-in-one HP Photosmart 6510 B211a that has been working like a dream since I got it last Winter. We had an unforeseen power outage yesterday however and once the power came back, the printer insists that there is no ink in the system. I fear the worst and think its brain may be somewhat scrambled.
I replaced two of the ink cartridges just last week with genuine HP ones and everything was fine. My ink levels are nearly low on the other two but I have not replaced these yet as there is no need.
Once the power came back, the printer informed me that the magenta ink was 'missing or damaged'. I removed the cartridge, cleaned it with distilled water and dried it. Once replaced, the printer changed its mind and told me all ink cartridges are now 'missing or damaged'. When I opended the printer again, the ink carriage did not automatically move as normal to allow me to change or remove the cartridges.
Furthermore the touchscreen on the printer will not allow me to exit this error message or perform any other function such as head cleaning. I have tried a soft reset and a hard reset but this has proved fruitless.
Is it knackered? Should I toss it and head to the shops again?
Thanks for reading this,
Brendo
This question was solved.
View Solution.

Hi Rich,
I replaced the magenta cartridge yesterday and my printer is working successfully again! Woohoo!
My dad's an electrician so between us we've come to the conclusion that when the power came back on after the outage there was either an electrical spike or insufficient voltage than normal and this damaged the nearest ink chip to the power supply - the magenta cartridge.
All is well again anyhow.
Thanks for your help - I appreciate it

Audio NOT functioning correctly after botched bluetooth headset pair attemp

After trying to connect my bluetooth headset (Motorola HS820) to my Macbook Pro i am having issues with several apps including firefox and mediacentral. Audio from these programs will not play. I get an error message saying there was a problem with my bluetooth audio configuration.. However apps like itunes and skype function correctly..
When attempting to pair my bluetooth headset the bluetooth assistant pairs it succesfully but when it connects it immediately disconnects.. after several attempts at tricking it to connect (advice from posts in mac.com forums) i have given up and deleted these devices from my bluetooth preferences and still have these problems..
I'm assuming there is some config file still in place pointing these apps in the wrong direction?
Macbook Pro Mac OS X (10.4.6) Dual Booter

Just verified Audio is not working for me in safari either...
Example i'm using is any video on youtube.com
Edit: I guess this would be a problem with macromedia flash then?

5.1.3 Not Functioning Right After Master Reset...

Similar Messages

Maybe you are looking for