5.1 channel audio not working

I can't get DVD Player to play 5.1-channel audio. I checked that the DVD is 5.1 channel sound. "System Preferences: Sound: Output" is set to "Digital Out." I have a fiber optic cable to my receiver (Yamaha RX-V457). The receiver shows that it's receiving only two channels. On my old G5 PowerMac the receiver showed that it was receiving 5.1-channel audio. The only things that are changed are the new MacPro and Snow Leopard. Any ideas where the problem could be?

Did you select "Digital Out" in DVD Player's "Disc Setup" preference?

Similar Messages

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

Iam using o player... Ac3 dts audio not working msg showing

Settings > General > Reset > Reset Network Settings
Contact the carrier.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Windows 8.1 beats audio not working

Product name: HP ENVY TouchSmart Sleekbook 4
after update windows 8.1 beats audio not working
This question was solved.
View Solution.

Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
Let me know if this helps ...
DOWNLOAD LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

Laptop left Speaker audio not working

Sir,
I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
Kindly do the needful

Hey @KKVK ,
Welcome to the HP Forums!
I understand your left speaker is not working on your dv5 notebook.
If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Sound/audio not work

sound/audio not work
Model- Compaq M2000.
S/N; CNF550117L,
P/N-EE462Pa#UUF
M2235

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Foxtel on T-Box -- all Foxtel channels suddenly not working

Hi I would really appreciate some help. We have happily had, used and (I daresay) loved our T-Box for the past 5 years. And then I made the fatal mistake of subscribing to Foxtel on T-Box about 6 weeks ago, as I wanted to legally watch Game of Thrones. (Please don't laugh at me spending $65 per month to watch one TV show; I am trying to do the right thing!) Suffice to say, the love affair with our T-Box is over. Foxtel on T-Box worked fine for a couple of weeks. (My original setup was a T-Box 1, connected via a strong WiFI signal via HDMI to plasma TV). And then all of a sudden, about 4 weeks ago, I began losing all Foxtel channels. Instead of the channel coming up, I get a black screen with a message at the top of the screen that says "Loading internet channel, please wait". And sometimes, I also get a message at the bottom of the screen which says "Cannot start playback, please try again later (0612)". A wierd thing is that through all of the problems with Foxtel on the T-Box described in this post, using the exact same account/subscription, Foxtel has continued to work percetly fine via the Foxtel Go app on my iPad and PC. Since out Foxtel channels started not working, I have called Telstra support about 5-6 times. As a result of these calls, I have purchased a T-Box 2 and it connected via ethernet instead of WiFi. (BTW, this didn't change anything and IMHO was a complete waste of $99.) The Telstra support person has apparently done all he/she can on their end. And I have also reloaded subscriptions, reset licences, reformatted the hard drive, reset the T-Box(s) on more occasions than I can count - about 10x. My ADSL2+ internet speed is not great, but it should be OK. It's usually about 5-7Mbps download and 0.5-1Mbps uplaod (as measured by http://vic.speedtest.bigpond.net.au). As I mentioned above, even when the Foxtel channels don't work on the T-Box, it works fine via the Foxtel Go app on my iPad and PC. Sometime doing these things get the channels to work again, by trying one thing after another, but usually it does not. On the rare occasion when the Foxtel channels do somehow come back, neither the Telstra support person nor I, know what happened to make them work. The issue has been escalated to a "Level 2 support person" who is investigating. But he/she has been investigating for the past 2 weeks, and hasn't been any help at all so far. I now keep getting fobbed off by the Telstra support person, with no commitment about when the "Level 2 support person" will do anything or when he/she will call me. Whilst the Telstra support people I talk to are perfectly polite - so far no-one can solve this problem. This is very, very, very frustrating! If you have had similar issues and fixed them, can you please let me know how? If you are a Telstra support person monitoring this forum, how can I progress fixing this problem? Cancelling my Foxtel on T-Box subscription is not what I want to do, but right at the moment I have no confidence that anyone from Telstra has any idea what is going on or how to fix it. Any support would be grately appreciated. Michael PS: And if I hear another Telstra support person ask "Can I help with anytthing else today?" -- when they haven't been any help whatsoever WRT the problem I called up about -- I am going to scream!

I'm in the same boat, into Week 3 of losing all my Foxtel Channels, Lost anything that says Foxtel. Channel 958 doesnt have any reference to Foxtel. Reset over 10times, Router & Tbox Reset & turned off for the Day.
No Foxtel Channels show up in the Guide. First I had the error messages, then everything was wiped when asked to reset with a Telstra Customer Support Person. Then got invalid channel numbers on all Foxtel, & lost all Info to anything Foxtel.
7 Customer Support persons & 14hours of Phone calls & complaints, no one has an answer how to get my Subscription Back. They can see that I have a Subscription but don't know how or why this has happened.
Have also got Foxtel on the job looking for answers as well as Telstra.
I have been using Computers for 30years & can't believe no one knows how to fix it.
The Tech Crew at Telstra said that my line speed had slowed due to the fact I don't have Foxtel on anymore.
I asked my Wife to ask the Customer Support person to get the Tech to Email that Answer in writing to us so I can show the Communication Ombudsman people, but all they send are Emails about "I hope we have helped you with your query" & can you complete the online survey.
What they need to do is a full diagnostics / firmware reload, but it seems no one knows how to do that.
Sorry I can't help!

6-Channel Audio not obtained from MB KT4V

KT4V MB doesnot deliver 6-channel audio output through line-in ,mike-in and
My MB KT4V does not deliver 6-Channel audio output using line-in ,line-out and mic-in socket onthe back panel as explained in appendix of Quick User's Guide. ;(
Shyamal X(

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

MSI 865PE NEO FISR2 Audio not working properly

The audio on my board is not working properly. I have it set for 6 channel and am using Creative Labs Inspire 5.1 Speakers that have 3 inputs that match the 3 output jacks on the mobo. However, its just not right. It is sending anything to all 5.1 speakers and also to the proper speaker at same time. So every sound is coming through all speakers and it a tad louder on the speaker it should be coming out on. Anyone else have any clue as to what setting I can change to correct this or is this something wrong with the cmedia drivers?

The answer to all your suggestions is yes, already did it and in the demo app the sounds work fine. Its just so odd, I may just go to Circuit City tomorrow and buy another set of speakers and see if it is possibly them that are causing the issue. Then if so, I'll just return the Creative Labs ones as I just bought them 2 weeks ago and CC has great return policy
Actually, one of your questions I did not either understand what you meant or did not see the option Quote
Did you enable the output port correctly - LR to LR, surround to surround, center/lfe to center/lfe
The only thing I see is setting phones, 2, 4 or 6 channel in the cmedia control panel and then I plugged in the proper cables.

Digital Audio not working on Satellite A505 S6012

My digital audio stopped working suddenly. I use HDMI to send the video out of my laptop to my projector. I had been successfully using, for over a year, a digital audio cable in the headphone (SP/DIF) jack to output the sound to my home receiver. The default audio set in the control panel is Realtek Digital Audio.
If I set the output to speakers and plug headphones in the jack, I get sound. If I set the output to Realtek Digital Audio and plug the digital audio cable in, I get no sound. I've tried new cables, changing the input to a different conection on my receiver, reinstalling the Realtek driver, and, as a last resort, completely recovering my laptop to the factory setting. Digital Audio still does not work.
Any suggestions? This is the main way we watch movies in my home.

hi, have you try out srs audio program it nice!
can u help me if u have make for yourself a recovery dvd of S505 S6012 because to mine i didnt do it and it gives me a lot of problems.
if you have please i would like to have it.
thanks....

HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

Hey guys,
I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

HP Pavilion p7-1421 Desktop PC BEATS AUDIO not working.

Hi, new here with thankfully my first problem with the desktop in the subject line.
Somewhere along the way, the Beats Audio stopped working correctly. The Equalizer
sliders will not move at all, and the "Test Speakers" button will highlight the left, then right
speaker, but no sound will be produced.
For background, I did install StartDoc, a program that gives one back the original Windows 7 "Start"
button and desktop. Other than that, I have not installed anything, except the reccommended HP upgrades.
Also, the machine is obviously running Windows 8, and I have NOT switched to 8.1.
I see on the Notebook page lots of questions re. Beats not working and solutions, but each user is asked
for the specific model, OS etc. This is why I chose to post a new thread, so that the experts can address
my exact machine.
Thanks in advance,
John
This question was solved.
View Solution.

Hi srv1954,
I suggest reinstalling Beats Audio.
Open the Charms menu, select "Search".
Enter "Recovery Manager" and then select Recovery Manager from the list. Click "Yes "at the User Account Control.
Select "Hardware Driver Reinstallation". Select "Next". Select 'IDT High Definition Audio CODEC".
Select "Next"
Follow prompts to reinstall and reboot your PC.
Jaco.
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

HP Envy Touchsmart 4-1118TU - Audio not working - Windows 8.0

Hello,
The audio on my HP ENVY touchsmart notebook has stopped working - notebook is approx 12 months old.
This occured seceral months ago, uninstalled the driver, reinstalled the driver and it fixed the problem.
Has now happened again, sometimes resetting fixes the problem but after several events it has now stopped working.
Tried uninstalling and reinstalling the driver again, but has not worked this time.
Currently running Windows 8. Have thought updating to Windows 8.1 may help rectify any bugs - but have not tried the upade as of yet.
Any help would be appreciated.
Jamie

Hi,
Please use the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03257712
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

5.1 channel audio not working

Similar Messages

Maybe you are looking for