5.1 DCP from separate files

Hi there,
Can you export a 5.1 DCP by using separate source files as input? I.e. a prores video file and then 6 discreet WAV files making up the 5.1?  Everything runs in sync.
Thanks,
mab

You have to open compressor and in the upper right of the window, there's a little audio icon, open it and choose the single locations of your mono files that will be compressed in a unique .ac3 file.

Similar Messages

  • How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done?

    How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC. 

    No unfortunately it won't open in quicktime either.  It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected.  VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB.  All of which cannot be opened or selected.
    Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC.  Is that the same?  Thank you for your time and response.
    CaCanuck

  • HT3847 How is the best way to separate copied MP3 from AIFF files in my library?

    How is the best way to separate duplicate MP3 from AIFF files in my library?

    Zice wrote:
    I want higher resolution then afforded in the original download.
    Then why are you converting iTunes purchases?
    You cannot get higher resolution by converting  the original. This goes for converting anything, not just iTunes purchases.
    Creating an AIFF will simply make the file 10 time as large with zero increase in quality.
    Don't really want to debate value of creating the new version.
    Agreed.
    You are simply wasting time and drive space converting iTunes purchases to AIFF.

  • Exporting multiple clips from one sequence as separate files.

    Hello fellow editors!
    I have about 100+ video files that I want to cut into shorter clips, edit a bit and then export in a Final Cut friendly format (currently they are AVCHD mts files) to send it to my friend, who is putting the whole movie together.
    I dont want to use Final Cut for this ( I cannot, I have a windows machine) and I was hoping to work with premier CC and media encoder CC.
    There is a way of putting all clips in one sequence and then nesting each one, then you can send them to Encoder CC and it will render them as separate files - thats is just not very productive, nesting clips one by one and it takes forever for Encoder to import sequences.         
    I was wondering if there is a better workflow? I heard that Final Cut has shortcuts to do this very easily, you just click on all those clips in sequence and "batch export" them, which puts them in some place as separate, already cut files.?
    Anything? I love premier, let my feelings be justified!)

    Kevin Monahan ...
    Lucid George is right ... select one trimmed clip, File->Export->Media, you can choose whether in-out or entire clip.
    Select MORE than one clip, you get a completely different export box ...
    These two selections were "exported" from that bin created by dragging the trimmed clips from the timeline to a new bin ... I don't know what else one is supposed to do. You can't even select multiples clips and batch sub-clipping, which would at least cut the steps down.
    Neil

  • When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open.  How can I change this?

    When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open.  How can I change this?

    It should be an attachment.  Your Mac just displays a preview of certain attachments (such as .pdfs) in the body of the message.  A PC, for example, will see it as an attached file rather than a preview.
    You can save the attachment on your Mac by Control-clicking on it and selecting Save Attachment.

  • How do you separate corrupt files from good files on a external hard drive importing them to my macbook pro

    how do you separate corrupt files from good files on a external hard drive importing them to your macbook pro

    You open them one at a time into thier respective programs and see if they are good or not and then send the bad ones to the Trash and the good ones to the appropriate folder.

  • How do I share data from one spreadsheet into another spreadsheet that is a separate file?

    I am trying to create a spreadsheet that will pull data from another spreadsheet in a different file for a what if scenario.  Is there a way I can reference a cell from that file besides adding a separate tab in the original file?

    For Numbers '09 (Mac), the answer is no, Numbers does not support references to a cell in a separate file.
    But the profile information at the bottom of your message, and the use of 'tab' in the message suggests you are using Numbers for iOS. I've requested your question be transferred to the iWork for iOS community, where the users of that version tend to be more plentiful than here, where the topic is Numbers (for Mac).
    Regards,
    Barry

  • How to  send the  output into separate file..(from spool)

    Hi  friends,
       i was create a  executable program  .. it was executing fine.. imagine.. my program is just  fetching  the data from MARA  table based on some conditions..  every thing is fine.. and i'm getting the output also..
           but i want to save this output in a separate file.. that means..  what can i do.. my program is  executing background... so, i want to save this out put in a file... so, can any one plz provide me the  coding steps...
            i dont know coding.. I'm learning ABAP... so, can you plz provide the exact coding..for storing these data into separate file from spool..
    help ful answers will be rewarded
    Thanks
    Babu

    hi
    if you want the o/p data in the seperate file in-addition to the spool
    call FM : 'GUI_DOWNLOAD'
    pass file name as
    w_localfile = 'C:\fite.txt'
    itab
    = the final o/p table                                                                               
    CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            filename                = w_localfile
            filetype                = 'ASC'
            write_field_separator   = 'X'
          TABLES
            data_tab                = itab
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            no_authority            = 5
            unknown_error           = 6
            header_not_allowed      = 7
            separator_not_allowed   = 8
            filesize_not_allowed    = 9
            header_too_long         = 10
            dp_error_create         = 11
            dp_error_send           = 12
            dp_error_write          = 13
            unknown_dp_error        = 14
            access_denied           = 15
            dp_out_of_memory        = 16
            disk_full               = 17
            dp_timeout              = 18
            file_not_found          = 19
            dataprovider_exception  = 20
            control_flush_error     = 21
            OTHERS                  = 22.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    thanks & regards
    vinsee

  • Can you export images which have been pasted into an Illustrator document as separate files?

    I have a multi-page Illustrator document (over 50 artboards) which contains lots of images that are all saved within the document (not linked in from seperate files) and all the images need to be exported as separate image files (similar to when you package a file in Indesign). The problem is the files are not linked, they are all saved within the document.
    Want to avoid having to copy + paste every image into a new document in Photoshop and save individually as this will take forever.

    Save the document as a PDF and Open in Photoshop. Select only the Images in the Open dialog and proceed from there.

  • Loading 361000 records at a time from csv file

    Hi,
    One of my collegue loaded 361000 records from one file file , how is this possible as excel accepts 65536 records in one file
    and even in the infopackage the following are selected what does this mean
    Data Separator   ;
    Escape Sign      "
    Separator for Thousands   .
    Character Used for Decimal Point   ,
    Pls let me know

    hi Maya,
    it just possible, other than ms-excel, we have editor like Textpad that support more 65k rows (and windows Notepad), the file may be generated by program or edited outside in excel, or newer version of excel is used, ms-excel 2007 support more 1 million rows.
    e.g we have csv file
    customer;product;quantity;revenue
    a;x;"1.250,25";200
    b;y;"5.5";300
    data separator ;
    - char/delimeter used to separate field, e.g
    escape sign, e.g
    - "1.250,25";200 then quantity = 1.250,25
    separator for thousands = .
    - 1.250,25 means one thousand two hundred ...
    char used for decimal point
    - - 1.250<b>,</b>25
    check
    http://help.sap.com/saphelp_nw70/helpdata/en/80/1a6581e07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/c2/678e3bee3c9979e10000000a11402f/frameset.htm
    hope this helps.

  • How do you combine pages from separate PDFs?

    How do you combine pages from separate PDF files into one document?

    I use Adobe Acrobat for this.

  • Load data from a file with multiple record types to a single table-sqlldr

    We are using two datastores which refer to the same file. The file has 2 types of records header and detail.
    h011234tyre
    d01rey5679jkj5679
    h011235tyrr
    d01rel5678jul5688
    d01reh5698jll5638
    Can someone help in loading these lines from one file with only two data stores(not 2 separate files) using File to Oracle(SQLLDR) Knowledge Module.

    Hi,
    Unfortunately the IKM SQLDR doesn't have the "when" condition to be wrote at ctl file.
    If you wish a simple solution, just add an option (drop me a email if you want a LKM with this)
    The point is:
    With a single option, you will control the when ctl clause and, for instance, can define:
    1) create 2 datastores (1 for each file)
    2) the first position will be a column at each datastore
    3) write the when condition to this first column at the LKM in the interface.
    Does it help you?

  • How do I export detached audio files as separate files, for Pro Tools processing?

    My project is a live band performance. I have every song as a separate Event with associated audio. I have detachd all the audio from all the video Events. I now want to Export the audio files to Pro Tools for editing, then Import the edited audio back into FCP X and snap the edited audio to the associated video Events.
    My problem is this: FCP X keeps exporting the audio as a single large WAV file, rather than as separate WAV files. In fact, the video events are separate, and so the audio associated with the video Events are separate.
    I first renamed the Role of every audio file as "Music", then did a Share --> Export Media of all "Music" audio Roles. After exporting, I found it was one large WAV file, rather than separate files of different sizes.
    As a 2nd try, I created Sub-Roles for each audio clip, and named each one with a distinct Sub-Role name. I then Exported all these Sub-Roles (yes, tedious). The result was that every exported WAV file was the same size, the same as the file size in my first try. The only audio that could be heard in each file was the audio in that particular song, but FCP X still created the very large file with silence in all the rest of the file. Since the file lengths don't match the original audio fil lengths, there will be a problem when I Import the edited files back into FCP X and want to Snap them into place.
    Question:
    How can I export the individual detached audio clips as separate files, the length of each file equaling the length of the original audio file in FCP X?
    Do I need to separate the detached audio into separate Layers visually in the Project Timeline, so they are not touching? Or does this matter?
    Help!!

    Michael Holmes1 wrote:
    I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
    No.
    You need to explore Compound Clips. This workflow may or may not be of help.
    Select an Event with clips in it and press Option+G to make a (blank) compound clip.
    Select the Event Browser, create a new Event and call it 'Effects'.
    Drag the Compound Clip into this Event.
    Right-click the clip and select 'Open in Timeline'.
    Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
    Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
    Now open a project and select and copy one of the clips with effects etc.
    Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
    This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
    It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
    Andy.

  • A way to move layers from one file to another in actions?

    Ok, question for the gurus out there - rather than try to explain, I'll give you an example: Lets say I have a series of adjustment layers that I want to apply to a sequence of 40 images. The adjustments are in a layer group, and are saved as a separate file.
    I DON'T want to drag and drop them, I want to run an action that will copy the adjustments to each image- now I know I can save down each adjustment as a separate file, lets a curve (acv) a selective color (ahu) file and load THAT in as part of my action. But I don't want to do that either, because these adjustments will change and I want to easily re-render my changes on all 40 images in one step.
    I also don't want to use After Effects to do it, because my client doesn't own it. There used to be
    a way to move layers from one file to another in actions because I seem to remember doing it. The answer is not Duplicate Group either because that needs you to specify a destination file name.
    Is it possible to do this without scripting? I'm pretty sure it used to be because I seem to remember doing it, just cant remember HOW I did. Maybe I'm wrong about this though.
    Thanks and sorry for the long post, this has been baffling me for weeks.

    Thanks Ed, but as I explained above
    "I know I can save down each adjustment as a separate file, lets a curve (acv) a selective color (ahu) file and load THAT in as part of my action. But I don't want to do that either"
    What I want to know is is there a way to move adjustment layers from one file to another in an action. I know also that you can use the clipboard to move pixel layers, but I've yet to find a way to move adjustments.

  • Need assistance embedding separate files into a PDF

    All,
    I am using Adobe Acrobat X Pro (Version 10.1.2).  I followed the instructions below to try and embed separate Word, Excel, PowerPoint, and PDF files into my PDF document as thumbnails, but the only problem is, this only works on my computer because the files are saved on my machine.  As soon as I move my PDF file which contains the links, the links will not open.
    How do I essentially do the same thing but have the thumbnail links be viewable by anyone, no matter their location?
    Create a link using the Link tool
    Choose Tools > Content > Link. The pointer becomes a cross hair, and any existing links in the document, including invisible links, are temporarily visible.
    Drag a rectangle where you want to create a link. This is the area in which the link is active.
    In the Create Link dialog box, choose the options you want for the link appearance.
    Select one of the following link actions: 
    Go To A Page View
    Click Next to set the page number and view magnification you want in the current document or in another document (such as a file attachment), and then click Set Link.
    Open A File
    Select the destination file and click Select. If the file is a PDF, specify how the document should open (for example in a new window or within an existing window), and then click OK. 
    Note: If the filename is too long to fit in the text box, the middle of the name is truncated.
           Open A Web Page
                     Provide the URL of the destination web page.
           Custom Link
                     Click Next to open the Link Properties dialog box. In this dialog box, you can set any action, such as reading an article, or executing a menu command, to be associated with the link.

    Hi George,
    I just tried adding the files as attachments; however I didn't like doing that because it increased the file size of my PDF document quite a bit. 
    I'm not sure if you're familiar with the "Insert Object" command in MS Word, but I want to do the same thing in my PDF document...but the key is, anyone must to be able to open the embedded file from any location.
    I created an MS Word document with several embedded objects.  I was later asked to PDF the Word document, but since embedded MS Word objects do not migrate to the PDF, I am now trying to embed the same files I embedded into my Word document into my PDF document over top of the icon image.  The file types I'm trying to embed include MS Word, Excel, PowerPoint, and Adobe PDF.  Does this make more sense?  I want to create a hyperlink over top the icon image that was PDF'd from the MS Word document which allows any user to click on the link and open the separate file.

Maybe you are looking for