5.1 handling is terrible
Sorry to moan, but erither I am incredibly stupid (always a possibility) or else the handling of 5.1 in CC is a bad joke.
Here's the situation - and if anyone can tell me what I am not getting here I will be eternally grateful.
Setup a new sequence to encode a series of still images to one file alongside rendering a 5.1 Dolby Digital export (using the SurCode CC plugin).
So I set up the sequence NTSC Widescreen 48K, and there is no regular 5.1 option so I have to create my own.
Off I got to tracks - and this is where the nightmare of hopeless setup starts.
I set up a 5.1 master and 6 mono tracks - all fine, hot the GO button.
Now I add my 6 mono tracks and this is where the trouble starts.
How do I set up the LFE track so that it ONLY outputs to LFE? The panner does not allow this and no matter what I do it is outputting my LFE channel to one of the 5 main channels
Hopeless.
Second problem - playback will simply no longer work off the space bar. It just does nothing.
Works fine in stereo, but as soon as I add those 6 mono files, kaboom - nothing works right,.
What have I not done? All I can see is to set up a multichannel, and manually do everything - which is very bad workflow & makes the audio feel as if it is still an afterthought.
How do I set up the LFE track so that it ONLY outputs to LFE?
I'm not sure you can. You can only set up the cutoff at which point the signal goes to LFE. This is done with the Bass knob in each track.
Similar Messages
-
Bizarre Lightroom image quality issue
I have a weird image quality issue with Lightroom, when opening RAW files (haven't tried it with any other file format, admittedly).
Here's an example of how the image appears in Lightroom. As an experiment, I exported the image as a TIFF and opened it in Gimp to see if it was just down to a display issue, but the exported TIFF showed the same quality issues as Lightroom. Aside from exporting as a TIFF (and then saving as a Jpeg), this image is SOOC:
<a href="http://www.flickr.com/photos/swisstony10/4912360565/" title="IMG_4134 by swisstony10, on Flickr"><img src="http://farm5.static.flickr.com/4093/4912360565_5891c0160f.jpg" width="333" height="500" alt="IMG_4134" /></a>
If I open the same image in Canon's own DPP software, this image quality issue does not occur, so I know that it's not an issue with the memory card, the camera, or my laptop's monitor. The SOOC image from DPP (exported as a Jpeg) looks like this:
<a href="http://www.flickr.com/photos/swisstony10/4912362053/" title="IMG_4134b by swisstony10, on Flickr"><img src="http://farm5.static.flickr.com/4116/4912362053_1ca92078c9.jpg" width="333" height="500" alt="IMG_4134b" /></a>
Has anybody else experienced this, and if so, is there a fix? (there had better be - I'm not going to be overly chuffed if my expensive Adobe software is being outperformed by the free stuff.. )
Russ.This is proving to be an extremely helpful forum!
Thanks for the advice on embedding my calibrated colour space - I don't very often send files anywhere other than my own home network (where all the monitors are calibrated), and when I do upload any to Flickr, it's never caused a problem in the past (and if I get anything printed by a lab, I use their ICC profile). I'll definitely keep that all in mind though..
Here's the original RAW file of the image I used as the example https://www.yousendit.com/download/aHlUa3ZONmNFd2Z2Wmc9PQ - I hope that helps someone to shed some light on what's going wrong. From what you've said though, it does look as if this is just an extreme example of something that Lightroom isn't very good at doing.
As I said in my original post, it'll be a bit disappointing if that's the case though, because a fair amount of the pictures I take tend to be of bands playing in what are, let's face it, diabolical conditions for photography. (At the festival I was attending at the weekend for example, all of the photographers - even the seasoned pros - were moaning about how awful the lighting was in the Big Top, and how much it sucked to try and get a decent picture there, as opposed to the main stage where everybody wasn't completely backlit by either red or purple lights. I appreciate that Lightroom is a much more powerful tool than Canon's DPP - the noise reduction controls on their own completely rock - but I must admit I'm a bit surprised that it can't handle highlights terribly well... -
Hi,
I have 2 oracle databases that I need to keep synchronised in real-time. They both have different data structures and updates can be made to both databases through different systems. i.e. two-way synch.
I am currently thinking that I could use triggers on tables in both databases with a log table that both databases can access.
Could anybody give me advice on whether this would be a good idea? Are there any alternative methods that I could investigate
Thanks for any helpit is somewhat complicated to guess what you really want to do. the technologies, which might help you include:
- make tables in the either database visible via a database-link
- setup snapshot-replication between the database. this can be done either in a way, that data can be updated on both sides or in a way, that tables are read-only in one system.
- setup a multi-matser replication between the two databases. there are again many options like doing it synchronously or asynchronously.
after setting up some replicated environemnets i am quite sure, that it is normally no good idea to write a replication on your own -- it looks quite easy from the distance but error-handling is terribly complex.
i could give you more specific information when you tell a bit about what you want to set up (feel free to send a mail)
olaf
[email protected] -
Help using AEWsetunsol() with PowerBuilder 7 on Nt4
I am trying to use AEWsetunsol() with Powerbuilder 7 on WinNT 4 (sp6a) or Win2000.
Can anyone help with regards to what we have to do in PB to get this to work?
Please be explicit.
Thanks in advance.
..LyallGot it working but had to write a tpinit() wrapper in a DLL in order to get it
to work.
The wrapper function allocated the TPINIT buffer and populated the structure with
appropriate usernames/passwords (none in my case) but we set the 'flags' field
to 1 (notify by signal). [Powerbuilder does not handle structures terribly well
I am led to understand]
If we did not do this, the AEWsetunsol() did not work.
The code window open is as follows :-
// pb_SetLoginInfo() is custom written DLL function - simply
// allocates the TPINIT buffer and populates it.
// fields in same order as TPINIT buffer
If (pb_SetLoginInfo("", "", "", "", 1, 0, "") < 0) Then //flag set to 1 - TPU_SIG
indicating unsolicited notification selected by signals
messagebox("Error", "Fail pb_SetLoginInfo()")
return
End If
// pb_tpinit() is custom written DLL function - simply calls tpinit() with the
structure populated by pb_SetLoginInfo()
IF ( pb_tpinit() < 0) Then //call tp_init from user defined external dll
messagebox("Error", "Fail tpinit()")
tpterm()
return
End If
We wanted to be notified by PBM_CUSTOM68 (Powerbuilder custom event 68)
Then, we called the AEWsetunsol as follows :-
//start subscribing to event
il_windowHandle = Handle(THIS)
//set event to trigger when receive unsolicited message
IF (AEWsetunsol(il_windowHandle, (1023+68)) < 0) Then //the (1023+68) indicates
the event id for pbm_custom68
messagebox("Error", "Fail AEWsetunsol()")
tpterm()
return
End If
We then setup a custom pb event to receive these events, subscribed to an event
and off we went.
Now, if we could only convince the Tuxedo 8 WS DLL to work with Powerbuilder (rather
than crashing on APP exit)
Hope this helps someone.
..Lyall -
File handling in Lightroom is pretty, terribly, awful?
The current workflow in terms of importing and mostly- organising your catalog/files is pretty damn painful as I find it. Is it just me, or are others running into similar issues?
First, let me state that I'm really fond of the develop features of Lightroom, and have been using the programme since version 1.
Lately however, I'm running into seriously annoying situations using Lightroom:
- Importing/moving duplicate filename errors: I managed to actually lose photographs because of trying to import a catalog maintained by a colleague that used different import and photo enumeration (camera) settings. This is something I hoped Lightroom would gracefully manage in the background; in this example his camera reset his count on card format. As he used date based folder import he evaded filename conflicts because all identically named photos resided in separate folders by default. However, when converting that folder/file structure to mine, which has one file folder per project/shoot resulted in thousands and thousands of file name conflicts. This simply baffled me. I had to go through tons of hoops in order for Lightroom to allow for two similarly named photographs to exist in the same folder. Not only would Lightroom not identify and warn that though the files were named the same, these photographs were NOT identical, it would then simply give a list of 'errors' caused by the duplicate names and leave it at that. Why on earth would Lightroom not offer to rename the 'conflicting' files? Or even better, offer the possibility create unique filenames upon import?
What do you reckon the OS thinks when multiple files with the same name gets put in the trashcan? Right... Try and undo that one!
- Can't copy: Hmmm? Can we not imagine that photographers may want to maintain different physical copies of photographs on separate media? Imagine that I'd like to keep a subset of my archive on a server, or external hard drive.. How is it possible that this is ...impossible? As much as I love the Virtual Copy in it's capacity to save HD space, we'd very much like to have the opposite too. A real copy, with 2 different entries in the catalog, or a Physical/Linked Copy that has one negative but two (raw) source files?
- Moving/File Operations themselves: So imagine I'm moving all the folders of one superfolder to a differently named one on a server. Because the root folder on the server already exist, I select the 40 folders I want to move and drag them to the folder on the server. Guess what. It starts copying the files to all folders- in parallel. The nightmare of any spinny disks, Lightroom creates 40 folders and as if distributing candy amongst kids starts putting one file in each. Then on to file no. 2. Everyone got 2 files? Yes? Here comes number three. 43 operations in process. WAT?
Sorry, I'm letting off some steam whilst waiting until these 43 operations complete. (Yes, I don't dare to cancel these operations, because.. oh )
And I'm probably doing something wrong or perhaps I don't grasp the logic properly. I'd be looking forward to any tips/hints.
Cheers,
TI've never had such problems, but I've sure heard about them (or problems like them) a fair amount over the years.
If you can report specific problems to Adobe here (1 problem per report), there is a chance it will do some good:
Recently active topics in Photoshop Family about Photoshop Lightroom
Note: one thing I realized way back is that I did not want to leave anything up to Lightroom (or chance), file-handling-wise, and so always assure my naming convention does not result in duplicate files. I NEVER want a -2 added to any of my files (ok, sometimes when testing, but otherwise: not). So anyway, to make a long story short, I recommend conventions and workflow which avoids the drama as much as possible.. - good luck (sorry I've not been more help..).
Rob -
Do I have a registry problem?
Every time I open a PDF file my local Adobe Acrobat (6.0) installation opens AND the file displays in Firefox (v. 4.0.1). When I close the PDF file it tells me other PDF files are open and asks if I'm sure I want to close Acrobat.
The process is messy and somewhere, before too long there is a memory error that causes the whole system to crash.
Is anybody else having this problem? Does anybody have any idea how to fix the conflict?Do I have a registry problem?
Every time I open a PDF file my local Adobe Acrobat (6.0) installation opens AND the file displays in Firefox (v. 4.0.1). When I close the PDF file it tells me other PDF files are open and asks if I'm sure I want to close Acrobat.
The process is messy and somewhere, before too long there is a memory error that causes the whole system to crash.
Is anybody else having this problem? Does anybody have any idea how to fix the conflict? -
Infinity Order - BT Fail - terrible way to do busi...
Bit of backstory first, feel free to scroll down the the ### to read my problem
I have been eagerly waiting for Infinty to increase the speeds i currently get through my BT line (all be it through BE broadband).
The date for the service in BRIDGEND was pushed back several times, which is kind of understandable when upgrading so many exchanges and cabinets. When I decided to check last week if the date had been updated for my area, I was delighted to find out that I could order Infinity the next day !
I placed my order online when the clock struck midnight the Infinty option became available for my telehpne number and i placed the order. I followed it up the next day with a MAC code from my current provider, which I phoned through to BT.
On my account page, the order was all set up - I had an engineer visit booked for Thursday 17th March and my equipment was on its way. As the Appointment had been made I booked the day off work and waited in excitement for my new world of internet use !
### Fast forward to today (Tuesday 15th March) ###
My Homehub and Infinity kit (2 cables) arrived this morning - Great. Checked my order online to double check all is well, only to find that it now stated the folowing on the engineer appointment seciton of my online order page:
Your appointment is no longer required, as our engineer can connect your line without requiring access to your premises. The engineer will work to connect your line at the exchange.
This was news to me as I thought you needed an engineer to visit to install the Infinity equipment and socket in the house?
I phoned customer services and after a while on hold I was told that there was a problem with the appointment system so BT had cancelled my order completely (without notifying me).
I was told by a nice Scottish lady (im sure they use Scottish people because of their nice soothing accents!) that they was a "fault" on the order and I would have to wait 48 hours and they will call me back and start the order all over again.
This will of course place me at the back of the queue (i was probabaly the first customer to order in my area as i logged on at midnight on the availability date in the area).
I was told the engineer would not be visiting me on Thursday at all and I should now wait 48hours to "see where we are then".
OK so faults happen, I accept that. And they need to be fixed. But heres my problem with the way BT are handling this:
The fault is with the APPOINTMENT SYSTEM (according to nice Scottish lady) - not on my line, not at the exchange, not with the little green cabinet on my road, but with BT's appointment system.
So, instead of keeping my alotted timeslot (for which i have booked time off work), BT have cancelled not only the appointment - but my Entire Order ! And instead of, calling me when they saw a problem, they put a note on my order syaing "Your appointment is no longer required, as our engineer can connect your line without requiring access to your premises. The engineer will work to connect your line at the exchange."
Terrible! So they wont bother to pick up the phone and pass it through to their engineer to keep to my timeslot, they have instead cancelled my order (which, by the way, i would not have been aware of if I did not check my order screen online today - no phone call from BT), and I now have to wait 48hours before i can start the whole process again and cross my fingers that the appointment doesnt get spit out again 2 days before my next appointment (which could be in a few weeks time by now).
So in brief, If you order BT infinity, and are given an appointment, and then their appointment system goes a bit wobbly be warned:
BT Have no contigency for when this happens, their system cancels your order outright (although still sends you a home hub), and you are told to wait 2 days before ordering again and hope the same thing doesnt happen.
Rather than calling their engineer to explain the problem and to ask to continue with the visit anyway (as there's no fault on the line) they cancel your order, dont bother to tell you they have done so, and inform you via your order page that your infinty will be connected at their end (which it wont - it cant be).
So for those returning to BT, in the hope that such a large company would have better procedures and engineer visit appointments system would be reliable, think again.
The grass isnt always greener.
(PS If you want to complain about their poor appointment system, when they cancel appointments without telling you - you are told you cant complain until you place the order again - laughable)Hi spellstar
Yep happy to help you out.
Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
Just send using the contact us form in my profile under the 'about me' section and mark FAO Craig please.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Intel GM45 (x4500M) terrible 3d performance with intel driver and mesa
I have following problem with my Lenovo SL500 laptop. I have installed new xorg-server 1.5, mesa 7.2, libgl 7.2 and intel driver 2.4 with libdrm 2.3.1 and intel-dri 7.2 (from testing repository) and generated xorg config. Everything went fine, and Xorg.log does not report any errors. When using 2d graphics everything is smooth and fast. Problem starts when I run glxgears. Performance is terrible, I get only about 60 fps. In addition I got the following error:
[tomek@notebook ~]$ glxgears
Failed to initialize TTM buffer manager. Falling back to classic.
292 frames in 5.0 seconds = 58.241 FPS
301 frames in 5.0 seconds = 60.001 FPS
Here is my glxinfo output
name of display: :0.0
Failed to initialize TTM buffer manager. Falling back to classic.
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_swap_control, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset 20061102 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.2
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_shading_language_120, GL_ARB_shadow, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_ATI_blend_equation_separate, GL_ATI_separate_stencil,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_point_sprite, GL_NV_texture_rectangle, GL_NV_texgen_reflection,
GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_OES_read_format,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SUN_multi_draw_arrays
3 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x5f 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
36 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x60 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x62 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x63 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x64 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x66 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x67 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x68 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6a 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6c 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x70 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x71 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x72 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x73 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x74 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x75 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x76 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x78 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x79 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x7a 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x7b 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x7c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x7d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x7e 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x7f 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x80 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x82 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
I'm puzzled because at www.phoronix.com they eneded up with good results with my video card (that is of course Intel x4500 as in topic )
I would be grateful if someone gave me a tip how to improve performance of my graphics card.
Here is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "glx"
Load "xtrap"
Load "dbe"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "LEN"
Option "PreferredMode" "1280x800"
ModelName "4050"
Option "DPMS"
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
Modeline "1280x800" 69.75 1280 1328 1360 1440 800 803 809 823 +HSync -Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux notebook 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 14 09:33:13 UTC 2008 i686
Build Date: 09 November 2008 07:16:27PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 07:54:05 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d66e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfdc00000/0, 0xd0000000/0, I/O @ 0x00005c00/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfdb00000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFDC00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 32704 kB
(II) intel(0): VESA VBE OEM: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Cantiga Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(**) intel(0): Option "PreferredMode" "1280x800"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): Output TV has no monitor section
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output TV connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1280x800
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Output TV using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000020 to 0x38000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x18000f00
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x00000010 to 0x000c0010
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x3503df00 to 0xce009400
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 482816 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1931260 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfdc00000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
(II) intel(0): [drm] mapped back buffer at 0xd2000000, handle = 0xd2000000
(II) intel(0): [drm] mapped depth buffer at 0xd274e000, handle = 0xd274e000
(II) intel(0): [drm] mapped classic textures at 0xd2e9c000, handle = 0xd2e9c000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 22978560 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device USB Optical Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event9"
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found mouse buttons
(II) USB Optical Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.1
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Found mouse buttons
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Thu Nov 27 07:54:13 2008: 7105 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=7122 )
AUDIT: Thu Nov 27 07:54:13 2008: 7105 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=7123 )
AUDIT: Thu Nov 27 07:54:13 2008: 7105 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=7124 )
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) config/hal: removing device USB Optical Mouse
(II) USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0x2a020000
(II) intel(0): [drm] dma control initialized, using IRQ 16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
Last edited by tomekz (2008-11-27 11:24:47)Apparently yes,
According to the thread:
To restore to the old behaviour, put this in your ~/.drirc:
<driconf>
<device screen="0" driver="i915">
<application name="Default">
<option name="vblank_mode" value="0" />
</application>
</device>
</driconf>
But I don't come back to the same perfs as before (tested with eternal lands).
I noticed that in my /var/log/Xorg.0.log:
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00020202 to 0x00020000
(WW) intel(0): PIPEBSTAT before: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: VBLANK_INT_ENABLE
There seem to be some problem with mtrr
I found this problem which seems related but I only have 2GB of memory
Last edited by sebcactus (2008-11-30 21:20:22) -
Is there not enough customer service reps to handle all the complaints
I have been a long time Verizon customer. I have home internet and wireless. I think you have excellent service all around. I will admit I have had a few issues over the years, but for the most part very happy. Since Feb. 19, 2014 I have had nothing but frustration with my wireless account. My daughter who was already a Verizon wireless customer wanted to save money by joining my family account. We went to your Chino Hills store and were told we needed an assumption of liability; which they could not do and we were given a number to call that would take care of this. Everything went well except email was wrong for me, but my daughter received one telling her as soon as I authorized the account it would be effective. Thursday morning I called to straighten out the email, but was told I could go online and find the document and approve. I received the confirmation, but since Wednesday my daughter’s phone could only receive calls. Do you know how terrible it is for a young person to not be able to text? Thursday evening my daughter calls Verizon for assistance and was told they could do nothing because she was not an authorized manager. Friday I called Verizon and was on the phone for over an hour and if my wife would not have come home in time I was told I could not add my daughter as an authorized manager. We got my daughter authorized and tech support over the phone fixed the issue for the texting without my daughter or her phone in my possession. A gentleman by the name of Aman out of Chicago was very helpful. I texted my daughter, but she was at work so I was not aware of the issue she could still only receive calls, but could not call out. Funny isn’t it, but I could add her line to the family account in the store. I do understand the security issues, but I think it has gotten out of hand. Her phone worked fine until she went on my account.
After all this I discovered I was qualified for a military discount. I decided to go to the Verizon store in Whittier on Washington and Lambert. Optimistically thinking I could get everything done instead of being on the phone for another hour or more. Well I was wrong. Tien is the manager and sent me to Elmer (removed). He said he can do nothing without the phone (odd but tech support can over my phone). I now ask him about the discount I was told I qualified for, and he says my wife who is the owner has to release the account, meaning we have to come back. As a result of all the running in circles with this company you could see how I am extremely frustrated. In addition now knowing that when I retired and lost my discount I didn’t need to release account. That was about 6 months ago. Also I was working for the Post Office and went to same store to apply for a discount and was not told she needed to release the account. That was approximately 2 ½ months ago. Never heard from them after that, but I don’t work for the Post office any longer. Also, I tried to remove the password for my account and was told it is mandatory to have password. I told Elmer that I have been a customer for a long time and that has not always been the case and his reply to me was that it has always been that way. I left the store and maybe you have been around, but you might want to check that out and I know you have the technology to find out how long I have been a customer. I hate to be lied to.
I believe a lot of the problem lies with communication; it seems every time I have an issue, there is a new policy. I know the frustration would not have happen if I was informed of policy changes and your employees didn’t assume we the customer are aware of all policy changes.
I went to Verizon store in Pico Rivera to activate my military discount; my wife wasn’t asked to release account. Once again I was there almost an hour due to new ways to verify my identity. I had my California drivers license and my DD214 (military separation papers) but that wasn’t good enough. Thank God my vehicle registration was accepted for validation.
My contract will be complete November 2014 at which time I am seriously considering changing wireless service. And what a process to complain, verizon email must have been toomuch too handle
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator(removed) I don't facebook or any of the others. Maybe your happy to give in to verizon hassle full way to complain. I will be sending this by U. S. mail as that is the only way in their contact us page. I think is (removed) for one of the biggest carriers to treat loyal customers with 10+ years. It is like all companys these days only the new customers get the discounts. But thanks for the help.https://community.verizonwireless.com/thread/817810
Comment edited as required by the Terms of Service
Message was edited by: Admin Moderator -
Contract mis-sold. Terrible customer service from a supervisor-no clear way to make a complaint
After being a good customer for a year and a Verizon Wireless customer for 5 years, numerous issues with Verizon Fios have surfaced.
1) Representative totally mis-informed about the contract
When I took out a contract with Verizon FIos a year ago, I had not wanted to have a contract because they only option available was for 2 years and I knew that the lease for my apartment was only for 1 year and in all likliehood I would be moving. I was told by the representative that there would be no problem if I took out a 2 year contract because I could simply transfer the existing contract to wherever I moved with no issue.
Fastforward a year and I'm moving, call Verizon to make the transfer and i"m told, that actually i'm effectively cancelling my existing contract and re-starting as a new customer. This means that my bundle has gone up $10 a month and I would have to start another 2 year contract.This completely contradicts what I was told a year ago. I would never have taken out the 2 year contract if I had known this.
2) Terrible customer service from someone who is a supervisor
This morning I spoke to a representative and after she said she couldnt address my concerns about being mis-sold the contract, I asked to speak with a supervisor. How he handled the call was incredibly unhelpful and rude - I dont understand how someone at a supervisor level can have that kind of attitude. First he tried to indicate that it was my fault for not being clear with the representative last year (before he knew the full facts), he did not take show any recognition that being mis-informed about a contract is a significant issue. When I asked him how to make a complaint he told me to go to verizon.com/contact. I did this while I was on the phone with him and told him that there was no clear way to make a complaint, I was told "I am a supervisor, I cant sit here on the phone with you and take you through it step by step" - I was not asking for step by step help, I assumed that as a supervisor he would know which wa the right section to click on. He then basically made it sound like I was an idiot and I was told that every other customer seems to find it intuitive (which judging by other comments on this forum about the contact piece of the site is not actually true).
3) Impossible to file an official complaint through normal channels
There is no email address to which you can send a complaint (according to the team on the phone). On the verizon.com/contact page, there is no option for making a complaint. When you type in a question about making a complaint nothing comes up. This seems ridiculous and makes it seem like Verizon is not interested in hearing customers feedback.Hi customer11201,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal. -
I've asked for this a lot: alpha channel saving with PS is terrible, and could use an update. And today, I was embarrassed by a bug that caused our game engine to perform poorly as a result of the way Photoshop handles the alpha channel.
The bug: make a 1024x1024 canvas, give it an opaque alpha channel (100% white, every pixel), then Image Size it down to something smaller, like 128x128. Now look at your alpha channel: grey pixels all along the border. ARRGGGHHH!!!1!1! It interpolated, I'm sure, using black alpha outside the canvas that doesn't actually exist, changing, in a powerful, fundamental way, the nature of the alpha channel. Video cards care about this stuff: 99.9% opaque is not 100% opaque. This is terrible.
The request: That PS intelligently offer better defaults when saving an image with an alpha. Right now, it offers, "What was the last bit depth you saved an image to?" Regardless of the fact that the previous image may have no relationship to the following image being saved, the default offering is always "what I did last time". This enables very easy pruning of alpha channels that should be there, or adding opaque alpha channels that shouldn't be there, bloating the file size.
I'd like PS to determine if an alpha channel is present, and base its default choice on that. If one is present, default to 32-bits. If an alpha channel si not present, default to 24-bits. That easy.
If multiple alpha channels are present, I'd like a dropdown menu to pick which one I want. Right now, if you save a PSD with multiple alpha channels to a 32-bit TGA, it throws all alpha channels away, and saves the image with a solidly opaque alpha channel, the choice no one asked for.
For texture work, or works where the graphics card is the destination, not the printed page, this cavalier handling of alpha channels is definitely not sustainable.
I'd love to never have to ask for this again.Generally speaking the resize of an image on a layer in which the canvas is exactly the size of the data will result in transparency peeking in around the edge (i.e., I'm agreeing with you here, just using Photoshop terms). I've always thought this was kind of poorly thought-out too. As you say, the algorithm must default to using 0 vs., say, replicating (or "clamping") to the alpha of the pixels right on the edge.
I suppose theoretically, the thinking is that if you were to EXPAND the canvas, the area around the image would be transparent anyway, and a subsequent resampling would then have the same result as the above.
Knowing this, one way to work around the problem would be to create a slightly larger image, then Canvas Size it down to your intended resolution. That way there's layer data beyond the edges with which the resizing algorithm can work. I realize that's probably not a practical solution in general, but a trick to keep up your sleeve if you really do need that 128 x 128 image with alpha solid to the edge.
-Noel -
Error handling for importing a file
Hi, I have only been doing java for 1 semester, and have got terribly stuck on my final assg. I have to import a txt file, and catch any exceptions. I know I am not using the correct method to read the file, but am not sure what the alternatives are. I am getting a compile time..illegal character msg for my Mydata.txt file. Here is my code.
PS I do have a CatalogueItem class and a bit more to the main class, I have not attached it as I do not want this to be too long.
/The program reads 10 sets of catalogue data from the Mydata.txt file
//it prompts the user to use one of the 5 menu options displayed on the screen
//depending on which option is selected the program displays the data
//back on the screen.
import java.awt.*;
import java.lang.*;
import java .io.*;
import java.util.StringTokenizer;
import java.text.NumberFormat;
import java.util.Locale;
//set up a class to call on the constructors from the catalogueitem class
public class Myassg5
private static final int MAX = 10; //sets the length to 10(for most exp products)
private static CatalogueItem[] prodlist; //sets array for product list
NumberFormat cash = NumberFormat.getCurrencyInstance(new Locale("en","AU"));
public static void main(String[] args) throws IOException
CatalogueItem prodlist = new CatalogueItem[10];//sets the length to 10
{//create Buffered FileStream and initialise to zero
//use bufferedReader to read in data my Mydata.txt file.
BufferedReader inFile = null;
BufferedReader inFile = new BufferedReader(new FileReader(C:\Mydata.txt);
//print a msg stating the file is loading
System.out.println("Loading file data from Mydata.txt...10 item(s) OK");
//initialise the array elments to zero
for( int a = 0; a < prodlist.length; a++)
prodlist[a] = 0;
//if incorrect command lines were passed in display
//usage msg and quit program
if(prodlist.length != 1)
System.out.println("Usage: java assg <Mydata.txt>");
System.exit(0);
try
inFile = new BufferedReader(new FileReader(args[0]));
//display the error and quit if the file is not found
catch(FileNotFoundException e)
System.err.println("File not found--program will terminate");
System.exit(1);
//display error msg and quit if there is a problem
//when opening the file
catch(IOException e)
System.err.println("Error opening file--program will terminate")
System.exit(1);
//repeat this error handling process as often as neccessary
boolean go = true;
while (go)
//get a line of data from the file
boolean valid = false;
CatalogueItem prodlist =-1;
while(!valid)
//read the line of text from the file
String temp = null;
try
temp = inFile.readLine();
//display error msg and quit if there is a problem
//reading from the file
catch (IOException e)
System.err.println("error reading from the file--program will terminate");
System.exit(1);
//if the string is null the EOF has been reached
if(temp ==null)
valid = true;
go = false;
//close the file stream
try
inFile.close();
//display error if there was a problem closing the file
catch (IOException e)
System.err.println("error closing data file")
I think the problem is the "\M" in "C:\Mydata.txt". It is trying to make that into an escape character. Use "C:\\Mydata.txt" or "C:/Mydata.txt" instead.
The logic here is odd. You open a BufferedReader for Mydata.txt, then you trash it without closing it and create another BufferedReader for whatever command line argument the user passes in. Which reader do you want to keep? -
Could not find prepared statement with handle 13
Hi,
I'm having a terrible problem: When I try to execute a SQL Query the following exception is thrown:
* "java.sql.SQLException: [Macromedia][SQLServer JDBC Driver][SQLServer]Could not find prepared statement with handle 13."
This exception is thrown is this line:
boolean returnResultSet = ((PreparedStatement)sqlStatement).execute();
The sqlStatement object is a java.sql.PreparedStatement that was received as a Statement in the method definition.
The following query is being executed in this PreparedStatement:
SELECT id_promocao, ds_nome, id_tipo, ds_sinopse, dt_lancamento, pt_site, pt_caminho_relativo, fl_ativo FROM TAB_CINE_GM ORDER BY ds_nome
I'm using Macromedia JRun 4 build 61650 and I'm using MS-SQL Server 2000 as a database server.
If anyone can help, I'll thanks a lot.
Helcio Chaves
S�o Paulo - SP - Brazil
[email protected]There is a common way to check runtime type:
if (sqlStatement instanceof PreparedStatement)
returnResultSet = ((PreparedStatement)sqlStatement).execute();
else
returnResultSet = sqlStatement.execute();
}By the way - I can't understand why you're trying to cast sqlStatement to PreparedStatement? It doesn't matter at all due to so-called polymorphism of all Java methods (except static ones). Anyway execute() will run for PreparedStatement but bot for Statement
Enjoy,
Pavel -
Handling contraint violations in a user friendly way
How do you trap constraint violation errors is a user friendly manner ...
I've seen a number of related posts on the forum but have not yet seen a solution that people are happy with.
Ideally, Id like to:
- avoid displaying the 'raw' oracle error to the user
- display a user-friendly message in an alert box
- sent the user back to the entry forms with his
entered data present.
This requirement seems fundamental to the development of a reasonable application, somebody must have solved it.I'm no expert, but here's info from my own experience.
1. Trap those pk/uk constraint violations in an appropriate exception block. Get this working and test it under all conceivable exceptions.
2. Write an exception handler, producing the javascript/html/redirects you need.
Oracle exception handling is pretty mature, but you need to put some effort in to catching everything listed in the package throws declarations.
If you're working with forms or other components the approach is different, but you weren't terribly specific in your question. -
Flash CC - Terrible Mouse Performance?
I've tried using Flash CC - I've used Flash CS4+ and had no problems whatsoever - and I noticed there was a terrible lag between my movement and the responsiveness of Flash.
I use mainly lines, and in previous Flash versions, the lines were instantly updated towards the location I was drawing them to. In Flash CC, there's a bit of a framerate issue(?) where the line takes a second before going where my mouse is.
I assume this is an issue with Live Previews, because every single dragging operation lags on Flash CC. Drawing a square, drawing a line, anything related to pressing and moving.
Is there any way to fix this? Is this a known issue? Is there any way to disable Live Previews - if that's really the case? My computer can certainly handle these things and I'm not sure why following my cursor is so hard.As someone who uses the line tool for mostly everything - that and shapes, I've definitely noticed a lag when drawing on the canvas. My computer is a 2011 iMac with 12G Ram so performance really shouldn't be an issue. I've really just had it with the Adobe Flash team, they just continue to "not get it".
Adobe, you've rebuilt the program from scratch for added performance - great, fantastic. But again, you've stripped or crippled existing and absolutely useful features and bodged the responsivity of the drawing without even introducing any new tools for animators - how about some custom brushes or lines that don't render like MS Paint. NUP - just the same old clunky program with no real innovation or attention to detail. Come on, it's 2013.
Each and every year (since CS4) I've been waiting for a release that is stable enough to justifying migrating, but it just never comes. Not only that, but every release is less Mac friendly. The Flash CC GUI is atrocious, there's nothing consistent with Cocoa. No native scrollbars, layer titles and frame numbers use UGLY bitmap text for god knows what reason and there's this bizarre rectangle smeared across the menu bar that breaks the gradient in OSX. Why? Can noone else see this? It's sloppy and looks awful.
And thanks for removing Object Undo Adobe. You really don't understand your customers' needs.
Maybe you are looking for
-
How to connect Apple TV using redmere hdmi to avr?
I have an Integra DTR-40.2 AVR. I have an Apple TV 2. I want to use an HDMI cable with Redmere technology, but I can't seem to get my Apple TV to work correctly. I have the TV "end" of the HDMI cable plugged into my AVR and the Source "end" in my App
-
I have a 16:9 project to which I want to add a slideshow. The stills appear OK during editing but the people look fat when the DVD (16:9 project) is played. I know how to adjust each still's aspect ratio but there are 161 of them. Doing each one indi
-
What hardware is compatible with the MAC OS
Other than the MAC hardware available from Apple, what hardware is compatible with the Mac OS? Is there any AMD compatible hardware or other Intel 64 bit hardware that is compatible with the OS? Like the Mac Pro but ... Mac OS X (10.4.8)
-
I am on Mac OS X Yosemite using DW CC 2014. Code view is set to Source Code Pro. The problem is that line height in code view is smaller than the font height -- or something like that. This screenshot demonstrates what I mean. Look at these character
-
Hi, I'd like to know if you know of an LRU (least recently used) cache that would use java.util.concurrent. I'm currently using the following implementation that is based on java.util.LinkedHashMap. Do you know if there is an implementation based on