5.1 installs fine, won't launch

I received my crossgrade installers for 5.1. The installation goes fine on my MacBook Pro 2.0GHz, but the apps won't launch. The icon bounces briefly in the dock, that's it. I've installed multiple times, same result.
I've trashed all the preferences I can find, also no change.
As a test I installed the same discs on an Intel Mac Mini, all worked fine. I don't need it on the Mini though, just the MacBook Pro.
Short of doing an OS X reinstall, any suggestions?

SOLVED!
Because I never got an App Crashed message I never even thought to look at the app crash logs. After reading part of the post pointed to by WHAAAT (above) I decided to take a look. Therein lay the answer.
There were three frameworks apparently not installed by the installer. The installer had not provided any error message. The crash log showed these messages (I'm truncating the extra stuff to show just the important stuff):
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Library not loaded: /System/Library/PrivateFrameworks/LiveType.framework/Versions/A/ProKit
Library not loaded: /System/Library/PrivateFrameworks/Helium.framework/Versions/A/Helium
I checked, and sure enough they (the three framework folders) were indeed not installed. Since I'd done the install on the Intel Mac Mini I grabbed those framework folders over the network and dropped them into place (needed to sudo mv them in terminal due to them going into /System).
All apps now launch fine (FCP, Compressor, LiveType, DVDSP - I did not install Soundtrack Pro or Motion). The only testing I've done beyond that is a quick Compressor conversion which ran fine. I'll reply back here if it turns out more needs to be done but I think I'm in the clear.
I hope this helps someone!

Similar Messages

Rosetta Stone TOTALe (Spanish) 4.5.5 Fatal Application Error 1141 Installs But Won't Launch After MacBook Restarts

I have a MacBook Pro running OS X 10.9.4 (Maverick) and am trying to add Rosetta Stone Latin Am Spanish to this laptop, after having successfully installed it several years ago on a older MBP.
I was given the latest download file TOTALe 4.5.5 by Rosetta Stone Support for this purpose. It will install fine and work, immediately upon installation, but when I shut down and restart, I can no longer launch the program and get the Fatal Application Error 1141 code instead.
I have been through this issue many, many times with Rosetta Stone Support already and have followed, alone and with them, the troubleshooting link set up for this problem without success. (Here is the link: https://rosettastone.secure.force.com/en/language-learning/articles/Error-1141-a ppears-when-I-start-the-Rosetta-Stone-TOTALe-application#macdiv) Rosetta Stone has run out of ideas to resolve this issue. (I have saved about 10 chat session transcripts where the support people have me run through the same steps over and over, despite my informing them of the previous lack of success in following these steps.)
My OS X is up to date. I am wondering if anyone else has experienced this problem running Maverick.
Any thoughts would be greatly appreciated.
P.S. This is a relatively new MBP and the only add-on software other than Rosetta Stone is Microsoft Office.

I have the same problem. Back in 2011 I bought Rosetta and got the very same problem, talked and talked to their support to no avail. On that instance they returned my purchase money. This time around I asked beforehand if the software was totally compatible with Yosemite and they said yes. I just got it, tried to unit and got error 1141 again. It is very frustrating! I will talk to them again but my hopes are very low. I guess one needs to understand that the software is crap!

CS4 Installation Disk won't launch

I have OSX Lion, a 21.5-inch, late 2009 Mac, and CS4 Premium. I put in Installer Disc 1 for CS4 Premium and double click Install Adobe Creative Suite (BTW, there is a white international symbol for "no" on the icon). A dialogue appears: "You can't open the appication Install Adobe Creative Suite because PowerPC applications are no longer supported."
Is CS4 PPC? Any way to fix this? Thanks.

I just did more investigating and my problem is slightly different than I thought.
I originally bought a full version of CS2 (the one with the leaf on the front with a photo of a yellow rose inside the leaf). On the box, it's called "Adobe Creative Suite Premium." Later, I upgraded to CS4 Design Premium (black cover with a strip of colored squares running down the middle). Now I'm in a situation where I need to reinstall Creative Suite on my late 2009 Mac that's running Lion. I'm stuck because I'm pretty sure I need to start by installing CS2 so I can then install the upgrade to CS4. Lion, as you know, won't let me do this because CS2 is PPC only.
I am legal with software at CS4, but this configuration won't let me get back there. Can you help me figure a solution? Thanks.

CS3 Installer Won't Launch

OSX 10.5.5
Intel Quad Core Tower, 8GB Ram
Currently installed: CS3.3 Master Collection
I am trying to reinstall Acrobat 8 from my Master Collection 3 disc, and Setup won't launch. I've also tried Utilities:Add or Remove Adobe Creative Suite 3 Master Collection, and it won't launch either.
I've tried the standard solutions: fix file permissions, install from admin account and new user account, uninstalled CS4 Beta applications. Nothing has helped.
Adobe technical support has been no help. I've been on the phone with them for two hours this morning.
Any suggestions would be greatly appreciated! Thank you!

BRIAN, HERE'S WHAT WORKED FOR ME, BUT I WAS USING WINDOWS XP PROFESSIONAL, NOT A MAC SYSTEM. STILL MAYBE IT MAY BE OF HELP.
I had problems uninstalling and reinstalling my Adobe Master Collection CS3. The problem being that the installer would run and then disappear without initiating the uninstall/installation process.
Here are the simple combination of steps which worked for me.
1/ removing Adobe Master Collection CS3 by running add/remove programs
2/ running the Adobe CS3 clean script. I'm almost 100% certain I chose option 1 when running the script http://www.adobe.com/support/contact/cs3clean.html
3/ out of desperation and realising I had nothing to loose because I had an image of the fairly newly configured hard drive I was using, I deleted the Adobe "Installers" Folder located inside the Adobe folder at C:\Program Files\Common Files\Adobe
Steps 1 and 2 above did not solve my problem.
Step 3 did solve my problem. However, I do not know if step 1 and/or 2 were required for step 3 to work.
GOOD LUCK :-)
PS. Please let users of this site know if this solution has worked for you ...and if so, pass the solution on elsewhere too.

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

I'm a Pro Tools user, who just did an "Archive and Install" installation of 10.5.8 over my 10.4.11 on my 2 Ghz G5, now Pro Tools won't launch. I checked the extensions folder and sure enough, the digidesign extensions were left behind. Can I revert back

I'm a Pro Tools user, who just did an "Archive and Install" installation of 10.5.8 over my 10.4.11 on my 2 Ghz G5, now Pro Tools won't launch. I checked the extensions folder and sure enough, the digidesign extensions were left behind. Can I revert back to the "Archive" of my 10.4.11 System from the "Previous Systems" folder? If not, what's the point of creating the "archive"?

Did you select "Preserve User Settings"?
Archive and Install installation automatically moves existing system files to a folder named Previous System, then installs Mac OS X again. (See tip 3.) You cannot start up your computer using a Previous System folder, nor can you "re-bless" the Previous System folder. (See tip 1.)
You can choose to preserve your user and network settings before installing. This option automatically moves existing users, Home directories, and network settings. This also skips the Setup Assistant after installation.
Note: Because the "Preserve user and network settings" option moves, not copies, existing users, Home directories, and network settings, from the Previous Systems folder to the newly installed System, these items will not exist in the Previous Systems folder after the Archive and Install is complete.
http://support.apple.com/kb/ht1710
Read this:
http://support.apple.com/kb/HT2196
BTW, it is never recommended to do a major OS change without having a full, bootable backup.

CC Apps won't launch in OS X 10.10 (CC itself works fine)

Hi - I've recently updated my MacBook Pro to Yosemite (not by choice I might add).
I hadn't used CC or any of the CC apps since upgrading last week, today I try and launch Illustrator - no joy. The icon bounces in the dock once, the dock widens momentarily as if another application was trying to launch, but nothing happens. No splash screen, no error message, nothing.
I tried to open other installed apps - InDesign and Photoshop - no joy.
I've since uninstalled EVERYTHING by adobe from the Mac, reinstalled CC and downloaded fresh versions of Illustrator and InDesign. Unfortunately this hasn't fixed the issue.
I've scoured the forums and although I've found fixes for problems with CC loading itself, I can't find anything to help me figure out why the apps themselves won't launch, and how I can fix it.
Any help much appreciated - I've been trying for about 2 hours now and am seriously starting to get behind on my work!

...Turns out the ONE obvious thing I hadn't tried was to go into the CC App itself, into preferences, then log out of my Adobe account and back in again - fixed the issue!
I couldn't believe its so simple and feel a bit stupid - but I had completely uninstalled the main CC App then re-downloaded it from Adobe, it downloaded already logged in as I was logged in on the website.
I hope this helps someone else with the same issue, as I had scoured the forums and the Adobe FAQ pages and hadn't found any solution. I stumbled across this whilst waiting for an agent to answer on the live chat!

Firefox no longer launches when I click the launch icon. It was working fine and then all of a sudden it won't launch. I have Vista home prremuim service pack 2. Can you please help me resolve this issue so I can once again use firefox? Thanks

firefox was working. Now it is not. Won't launch when I click the icon. Don't know the version as I cannot get it to launch to check the version.

https://support.mozilla.com/en-US/questions/891374
http://kb.mozillazine.org/Browser_will_not_start_up

Flash CS3 won't launch after installation

Any Ideas
I've just installed CS3 Web standard on 19 PC's ( Win XP SP2
2 GB RAM) but for some reason Flash won't launch on some of these
computers. When you try and launch Flash you get as far
initializing fonts and then closes down.
It's quiet strange Flash works on some of the 19 Computers
which I must add are all identical and have the same software
installed on them.
Has anyone else had any issues with Flash?
Irfan

Well, it can get worse: my downloaded version will not
install (Vista, run program as an administrator, even ruuning in
compatibility mode). No matter what I do, after clicking setup.exe,
there is a dead silence. No new process is launched.

Installation of Comodo Free Firewall Crashed System, Now Firefox Won't Launch

I installed Firefox 4, then my ZoneAlarm Free Firewall and Free AVG 2011 Antivirus were rendered incompatible. As a result, I installed Comodo Firewall --- I did not uninstall Zone Alarm or AVG. Comodo instructed me to restart the laptop in order to finish the successful install. When I restarted the laptop, it crashed. I restarted in Safe Mode and did a system restore ---went back 6 days. Now Firefox won't launch.
What happened and how can I fix it?

Hi thanks for that. I've been through those pages already. I think maybe my lack of knowledge is hindering me somewhat. However the page you linked assumes two things: I can see the processes on Task Manager and I can start up Firefox. The latter is unusual. You see when it suggests changing or creating a profile, I have to use the profile manager which is part of Firefox - which I can't open.
I don't think a previous session is still running because I've restored and installed so many times.
While I appreciate the speedy response, if anyone has any ideas using words, I'd be extremely grateful. :0)

Premiere Elements 11 won't launch

G'day,
I downloaded the trial version of PRE11 a few weeks ago, but I couldn't get it to run. Upon launch I get the welcome screen with two choices, to launch the Organizer or the Video Editor, but neither of these actually start. It seems as it is trying though, as I see a scrolling line below my choice after clicking it. No error code or anything like it, it simply won't start (and I don't see any process starting either).
Nevertheless, a few days ago I bought PRE11 (Win/Mac DVD, English) and installed it. Exactly the same behaviour as with the trial, apart from one thing. When I try to lanuch the Video Editor I get the licence agreement. After agreeing, it's the same thing though, nothing happens.
I've read this thread (http://forums.adobe.com/message/4773135) and tried to see if I had any of the symptoms described, or if any of the suggested solutions worked. So far, no luck. I tried Large_Donkey's solution (http://forums.adobe.com/message/4893868#4893868) with the msvcr80.dll and msvcr100.dll files, but it didn't make any difference. Same thing with VDOsurfer's reply (http://forums.adobe.com/message/4903592#4903592) I also tried primarykeytech's suggestion (http://forums.adobe.com/message/4905283#4905283) and downloaded Dependency Walker and ran both Premiere Elements 11.exe and Premiere Elements.exe. At first, it reported that IEShims.dll and gpscv.dll was missing/couldn't be loaded, so I added these to the Premiere Elements folder. Then I got a message (still while running Premiere Elements.exe in Dependency Walker) saying that sysntfy.dll was missing, so I added this one as well to the Premiere Elements folder. After this, I still get three messages in Dependency Walker, but no further description on which files it can't find:
"Error: At least one module has an unresolved import due to a missing export function in an implicitly dependent module.
Error: Modules with different CPU types were found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module."
And none of these changes made any difference, I tried to launch the Video Editor and/or Organizer, but it's the same thing; won't launch, no error message. I've now resetted everything back to the way it was on installation, and tried to continue finding any solution.
Some specs, even if maybe not all of these are relevant. If any other specs are needed, just inform me.
Motherboard: Asus P6T Deluxe V2
CPU: Intel i7 950 3,06GHz
PSU: Corsair HX 650W
RAM: Corsair XMS 12GB DDR3 2000MHz
Graphics: Nvidia/Gigabyte GTX 460
Sound: M-Audio Delta 1010LT
Drives: 2x500GB WD Black HDD (programs and data), 1x120GB Intel X25-M SSD (OS)
OS: Windows 7 Ultimate 64-bit
Monitor: Dell U2711
Thanks in advance for any help.

Well, I tried the blacklist approach by adding a "blacklist.txt" file to the VST plugins folders I have, but to no avail. I also read the last post you made in the "Failure of Premiere to Launch - One Possibility VST's" thread, with the answers from Adobe Engineering. As that post was made almost 2 years ago, I somehow think this wouldn't be an issue in PrE 11 anymore?
Anyway, while trying to launch Premiere Elements.exe ~200 times the last 24h, I've not noticed anything strange in Event Viewer, no errors or warnings connected to the launch of PrE (or, for that matter, no errors or warnings at all during the time I try to launch the program). One thing I did notice, though, is that the process Premiere Elements 11.exe actually starts (I chose not to display the welcome screen every time, but to launch the Video Editor right away) but then quickly terminates. Utually it manage to get between 15-20MB of memory before it crashes and terminate the process, only takes 1 or 2 seconds from launch to termination.
Slowly losing my hope to actually discover the cause, as I'm shooting in the dark evey time (not getting any error messages or hints on what actually fails). Really needed to use PrE this week, maybe have to find some free alternative on the interwebs.
Regards Henrik
Edit: Searching deeper on the Adobe forums regarding VST scanning issues with PrPro/E, and it baffles me how long this error seems to have been going on, even if it's not 100% certain that is the error in my case.
Edit2: Once again a shot in the dark, but I'm thinking my troubles may be due to multiple hard drives? As things are scattered over 3 discs (OS on one, programs on the second one and personal data on the third one) this might cause some path/reference issues? I was thinking this since Depencency Walker gives me the following error messages:
"Error: At least one module has an unresolved import due to a missing export function in an implicitly dependent module.
Error: Modules with different CPU types were found.
Warning: At least one delay-load dependency module was not found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module."
And it also states that it can't find IESHIMS.DLL and GPSVC.DLL (a road I already have been down earlier). This got me thinking PrE can't find the correct files from where it is installed (E:\Program Files\Adobe\Premiere Elements 11). On the other hand, I'm getting the exact same error messages on Photoshop CS5 (which runs fine), and the same two dll files seems to be missing. Even tried running a few other programs that work, such as games, though Depencency Walker, and even they seems to miss these dll files.

ITunes won't launch in windows 7 64 bit

itunes used to work fine under Windows 7. Recently it stopped responding. It won't launch. I can see that the processes are running, in Task Manager. But iTunes never opens.
I have tried a dozen ideas from hardware review forums and I have done all that the Apple site suggests here http://support.apple.com/kb/TS1717.
I have uninstalled and reinstalled iTunes 64 bit and Quicktime and removed and re-installed the Apple Application Support.
Nothing so far has changed anything.
Can anyone help me find out why this is happening and how to correct it?

Quicktime does NOT start
Many thanks.
In recent times, the error-message-free iTunes and QuickTime launch failures have been indicating that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Itunes 10.1 won't launch on Windows 7 x64

itunes version 10.1 for Windows 7 64-bit won't launch after install. I tried launching it under a different user. I tried disabling my antivirus software. I tried using the desktop shortcut, Start menu shortcut, and itunes.exe. The Event Viewer does not log any errors or warnings during installation or when trying to launch the app. I have tried uninstalling and reinstalling the app too. When trying to launch the app, no messages are received, absolutely nothing happens. I had the previous version of itunes installed on the same hardware configuration. During installation, no warnings or errors are received. I checked possible conflicts under msconfig.exe, but only a few apps are checked to start at startup.

When trying to launch the app, no messages are received, absolutely nothing happens.
Some questions in the interest of narrowing in on possible culprits with an error-message-free iTunes launch failure.
(1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
(2) If your QuickTime seems to be launching fine, try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?
If iTunes launches with the BonJour Service disabled, by any chance do you have a recent version of IOBit's Advanced SystemCare utility currently installed on the PC? If so, try uninstalling and reinstalling Advanced SystemCare. Can you launch iTunes without having to disable the BonJour Service now?

Yahoo Pagebuilder won't launch

Ever since I did the security update in early March I can't launch Pagebuilder anymore. It worked fine previously to that.
As best I can tell, something in the update prevents yahoo from accessing it's cookie on my mac.
It's NOT a browser issue, it's NOT a compatibility issue- all system requirements are met, it's NOT an individual user issue. It is definitely an issue with mac computers themselves, but what?
And, I'm not the only one with this pagebuilder problem, or with this app:
aol users are having trouble accessing their e-mail, too.
Something Apple did is messing things up for us mac users!!
PageBuilder works fine on pc's still, but I have a mac!
Thanks,
Julie

> because then I will have used up my second and final
installation.
No, you won't.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"davidoconnor123" <[email protected]> wrote
in message
news:eavkf4$m4u$[email protected]..
>I bought, installed and started using Dreamweaver 8 on my
Mac osx 10.4.7.
>I
> quit the application. When I tried to open it later, it
won't launch and
> the
> error message is blank (other than the ! sign and the
'ok' button). I
> can't
> find anything in the supprt knowledge data base to help.
I don't want to
> reinstall it because then I will have used up my second
and final
> installation.
>

Non-Apple applications won't launch

On Intel iMac, recently many non-Apple applications won't launch, including Photoshop, Indesign, Quicken, Filemaker, Techtool Pro. On the other hand, Mail, Safari, iPhoto, iTunes, Pixadex, Ultralingua all launch just fine. The non-launchers quickly present the window with Ignore, Report..., Relaunch; and using Relaunch just brings the window up again.
I've tried Disk Utility, both from the drive and from the OSX install disk; Time Machine back to just before the problem started; removed .plist file from Preferences: all to no avail.
While this problem started one week ago, we have had a new iPhone 3G since July 12 (since I see a few discussions with the same error codes related to iPhone).
Below are the error reports for Photoshop and Filemaker, and some system info.
What can I do to fix this? Thanks!
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 1 GB
Graphics: kHW_ATIr600M76Item, ATI,RadeonHD2600, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
PHOTOSHOP
Process: Adobe Photoshop CS2 [272]
Path: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
Identifier: com.adobe.Photoshop
Version: 9.0.2 (9.0.2x312 [20060822.902x312 02:00:00 cutoff]9.0.2x311) (9.0.2)
Code Type: PPC (Translated)
Parent Process: launchd [147]
Date/Time: 2008-08-09 14:26:42.705 -1000
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_CRASH (SIGILL)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x801a308a 0 + 2149200010
1 translate 0xb80ecd11 gettimeofday_wrapper + 37593
Thread 1:
0 ??? 0x800bc4a6 0 + 2148254886
1 ??? 0x800c3c9c 0 + 2148285596
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed6f5 0 + 2148456181
4 ??? 0x800ed5b2 0 + 2148455858
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb813cfcc ecx: 0xb7fffa6c edx: 0x801a308a
edi: 0xb81d8794 esi: 0x00000004 ebp: 0xb7fffa98 esp: 0xb7fffa6c
ss: 0x0000001f efl: 0x00000246 eip: 0x801a308a cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x9230b958
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
NO CRASH REPORT
FILEMAKER
Process: FileMaker [517]
Path: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker
Identifier: com.filemaker.pro7
Version: FileMaker Pro version 7.0v1a (7.0.1)
Code Type: PPC (Translated)
Parent Process: launchd [147]
Date/Time: 2008-08-09 14:30:10.117 -1000
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXCBADINSTRUCTION (SIGILL)
Exception Codes: 0x0000000000000001, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 translate 0xb80a20a7 0xb8000000 + 663719
1 translate 0xb80bdb8b 0xb8000000 + 777099
2 translate 0xb80b7007 0xb8000000 + 749575
3 translate 0xb80d49c0 0xb8000000 + 870848
4 translate 0xb813ce79 spinlockwrapper + 1981
Thread 1:
0 ??? 0x800bc4a6 0 + 2148254886
1 ??? 0x800c3c9c 0 + 2148285596
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed6f5 0 + 2148456181
4 ??? 0x800ed5b2 0 + 2148455858
Thread 2:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816f427 CallPPCFunctionAtAddressInt + 87491
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 3:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816e6a1 CallPPCFunctionAtAddressInt + 84029
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 4:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816e6a1 CallPPCFunctionAtAddressInt + 84029
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 5:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816e6a1 CallPPCFunctionAtAddressInt + 84029
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb80a2028 ecx: 0xb7fff95c edx: 0x800fb082
edi: 0x00000002 esi: 0xb81d8c18 ebp: 0xb7fff9c8 esp: 0xb7fff990
ss: 0x0000001f efl: 0x00010282 eip: 0xb80a20a7 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x800fb000
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
Rosetta Version: 21.03
Args: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker -psn0176171
Exception: EXCBADINSTRUCTION (0x0002)
Thread 0: (0xb019cdb8, 0xb815282c)
0x957fe8c0: /usr/lib/libSystem.B.dylib : _pthread_condwait + 1260
0x0274a478: No symbol
0x02891fc8: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x02737618: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x957fe910 ctr: 0x957bb490
r00: 0xffffffdb r01: 0xf0182c80 r02: 0xa09c6924 r03: 0x00004903
r04: 0x00004a03 r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x00b34000 r09: 0x00000001 r10: 0xbfffec50 r11: 0xa09cb9ec
r12: 0x957bb490 r13: 0x00b341d8 r14: 0x00000000 r15: 0xa0a00d44
r16: 0x00b34000 r17: 0x957c0e1c r18: 0xbfffec70 r19: 0x00000020
r20: 0x957c0e6c r21: 0x00000000 r22: 0xbfffec70 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa09ce3e8
r28: 0x00c382fc r29: 0xa09c6924 r30: 0x00c38328 r31: 0x957fe3e8
Thread 1: (0xb009adc8, 0xb815282c)
0x00000000: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : + 0
0x9585e7c0: /usr/lib/libSystem.B.dylib : _sleep + 76
0x0274c2b4: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0xbfffed30: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x958473f0 ctr: 0x957bb5b0
r00: 0xffffffa6 r01: 0xf0080ca0 r02: 0x00000000 r03: 0x00000062
r04: 0x0948111b r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x80000000 r09: 0x00000000 r10: 0x00000000 r11: 0xa09cb62c
r12: 0x957bb5b0 r13: 0x957c0f80 r14: 0xbfffece0 r15: 0xa0cdb6bc
r16: 0x957c193c r17: 0xa0ccb6bc r18: 0xa0cdb6bc r19: 0x00c30240
r20: 0xa0cc6174 r21: 0x00c2ae40 r22: 0xbfffede0 r23: 0x00000003
r24: 0x00000003 r25: 0xa09d72b8 r26: 0xf0080d50 r27: 0xa09d72b8
r28: 0x00000062 r29: 0x0948111b r30: 0x00000000 r31: 0x958472b8
Thread 2: (0xb011bdb8, 0xb815282c)
0x957fe8c0: /usr/lib/libSystem.B.dylib : _pthread_condwait + 1260
0x0274a478: No symbol
0x0275ab14: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0xbfffebd0: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x957fe910 ctr: 0x957bb490
r00: 0xffffffdb r01: 0xf0101c70 r02: 0xa09c6924 r03: 0x00004703
r04: 0x00004803 r05: 0x00000028 r06: 0x00000030 r07: 0x00004603
r08: 0x00000000 r09: 0x00000001 r10: 0xffffff8f r11: 0xa09cb9ec
r12: 0x957bb490 r13: 0x014fa810 r14: 0xbfffeb90 r15: 0x00000000
r16: 0x00000000 r17: 0xbfffebe0 r18: 0xbfffebc0 r19: 0x00000000
r20: 0x02784324 r21: 0x02c59248 r22: 0xbfffebc0 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa09ce3e8
r28: 0x00c3841c r29: 0xa09c6924 r30: 0x00c38448 r31: 0x957fe3e8
Thread 3: Crashed (0xb7fff5ec, 0x800bc4a6)
0x957c3520: /usr/lib/libSystem.B.dylib : szonecalloc + 232
0x922d8e78: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : ripcInitialize + 28
0x922d9064: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : _CGWindowContextDelegateCreate + 36
0x947d90dc: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGWindowContextCreate + 200
0x915a09a0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : WindowData::GetCGContext() + 88
0x915a0474: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : WindowData::PrepareForVisibility() + 128
0x9159fb70: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __ShowHideWindows + 276
0x9159fa4c: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _ShowHide + 36
0x9159f9b0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : MBarDraw() + 76
0x9158b2f0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : ShowBar(unsigned char, unsigned char) + 356
0x915abcd0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SetMenuBarObscured + 220
0x000d3994: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : ShowClarisScreen(unsigned char*) + 48
0x0012acc8: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : CFMProApp::InitApplication() + 1084
0x0037e870: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : CMacApp::Main() + 64
0x00128194: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : _main + 28
0x00001f48: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : __start + 460
0x00001d78: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : start + 48
0x00000000: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x922d7810 ctr: 0x922d903f
r00: 0x00000000 r01: 0xbfffe870 r02: 0xa03977e4 r03: 0xa039436c
r04: 0x00000000 r05: 0x00000010 r06: 0x00000005 r07: 0x00000000
r08: 0x00000005 r09: 0x00002e24 r10: 0x00cfc080 r11: 0xa09cb6d4
r12: 0x922d9040 r13: 0x00000000 r14: 0x00000001 r15: 0xbfffeb40
r16: 0xbfffec1c r17: 0xfffffff5 r18: 0x00000000 r19: 0x00000000
r20: 0xbfffeb40 r21: 0x00000001 r22: 0x00000000 r23: 0x00c2b8d0
r24: 0xa039436c r25: 0x00000a41 r26: 0xa0879024 r27: 0xa03977e4
r28: 0x00000000 r29: 0x00c5ad30 r30: 0x00c62fc0 r31: 0x922d77e4
Thread 4: (0xb021ddb8, 0xb815282c)
0x957fe8c0: /usr/lib/libSystem.B.dylib : _pthread_condwait + 1260
0x0274a478: No symbol
0x027c106c: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x957fe910 ctr: 0x957bb490
r00: 0xffffffdb r01: 0xf0203c20 r02: 0xa09c6924 r03: 0x00004b03
r04: 0x00004c03 r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x1614a600 r09: 0x00000001 r10: 0x00000800 r11: 0xa09cb9ec
r12: 0x957bb490 r13: 0x9584cbac r14: 0xbfffee30 r15: 0x00000002
r16: 0x9584cc3c r17: 0x957bc5b0 r18: 0xbfffebd0 r19: 0x00000000
r20: 0x957bc66c r21: 0xbfffeb80 r22: 0xbfffebf0 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa09ce3e8
r28: 0x00c531cc r29: 0xa09c6924 r30: 0x00c531f8 r31: 0x957fe3e8

No idea what caused it, but your PPC emulator is definitely hosed and doing a clean installation would probably be less time consuming than figuring out what the problem is.
This is also all very old software that was never meant to run in Leopard at all, so you should consider the possibility that some of it will simply never work.

5.1 installs fine, won't launch

Similar Messages

Maybe you are looking for