5.1 or 5.1.2 has brought FCP to its knees!

Last week I received my FCP 5.1 Crossgrade. I installed the Crossgrade and then proceeded to install the 5.1.2 update from Apple's website.
After installing these updates I have experienced numerous problems. The audio in several projects is out of sync, or 'drifting', whereas they were previously fine, i.e. synced up.
I am not able to capture. FCP does not read my cameras (FW). And I know that it is not the port, because the 'System Profiler' reads the FW port, and iMovie will capture from it as well.
Any ideas?
Any help would be greatly appreciated!!!
(Yes, I now know that you shouldn't install updates in the middle of the project. I am more concerned with the inability to capture than I am the state of the projects. I was going to attempt to remedy the 'drifting' issue by recapturing the source file...but that can't happen...no capturing!)

Brian,
Thanks. I followed those steps, but to no avail. I went to 'Library' / 'Receipts' / Quicktime, and then put the Quicktime files with numbers behind them in the Trash.
I then downloaded QT, and restarted the computer. I then opened FCP, and still not reading the FW port.
Do I now need to go to the 'Library/Receipts' and delete the new file w/a number behind it?
Thanks.

Similar Messages

I brought OSX to its knees.

With the CanonScan LIDE 500F. See computer details below. I was running iTunes, iChat, Mail, Word 2004, Entourage 2004, Safari, VPN on my corporate network, OS9 running with TCP/Access for AS400 file transfer download and at the same time I had Mocha X running another TN5250 session connected on the net via Airport Base Station.
I decided to scan an image. Simple one, black and white. Open up PhotoShop CS, saved the file and all seems well, then all of a sudden the entire system was running slower than a slug on his best day. I didn't force the Mac to shut down, kept selecting each app to quit it and it took 10 minutes at a time to even switch to the running application to be able to quit it. iTunes kept playing on though. Eventually I was able to quit all and restart the computer. It didn't crash, but it sure brought OSX to its knees.

Also this thing called "CNQL2410_ButtonManager". It loads when I run the scanner and stays there. Even when I quit the Canon Toolbox, it stays up and running. When it whacks the system next time, I'll try to get to the process manager and see if that thing is hogging up CPU cycles.
85% during idle is just insane, and they think its normal is crazy in my book. I think I'll start using Image Capture for now on. Being thats its an Apple App, I hope it will play friendlier with the OS and not play naughty like the Cannon apps.

All of a sudden ALL of my Adobe programs stopped working, cannot open, uninstall or reinstall. DW, PS, PE etc. That has brought my productivity to a halt!

All of a sudden ALL of my Adobe programs stopped working, cannot open, uninstall or reinstall. DW, PS, PE etc. That has brought my productivity to a halt!

You mean Creative Suite 3?
Windows 7 (32-bit)?
Possibly Related Help Articles:
Error "Problems occurred during installation" | CS3
Error "Licensing has stopped working" | Windows
Nancy O.

HTTP 404 - The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

I have created a web app in our SP 2010 test env. From our dev environment I brought in a content db and attached it to this web app using Mount Powershell command.The command worked without errors.The content db had one site collection in it. When I navigate
to that site I get the error below.I followed the same approach in dev and didn't have any issues.The content DB was migrated from MOSS 2007 site collection.
Please help.
HTTP Error 404.0 - Not Found
The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
It says the most likely causes are:
The directory or file specified does not exist on the Web server.
The URL contains a typographical error.
A custom filter or module, such as URLScan, restricts access to the file.
This error means that the file or directory does not exist on the server. Create the file or directory and try the request again.
Sreeni

try this trick
open page in web browser and go to view source and check the file that missing

G4 mini has a problem with its volume structure

My G4 mini has a problem with its volume structure according to Tech Tools Deluxe. One that the application can't seem to repair. Ran it 3 times and it always hangs before it completes the fix. Never hangs in exactly the same place in the repair routine, but always hangs.
Ran these tests because for the longest time the mini would accelerate (panic) and shut down. Installation on a new system hangs before it completes the install of all the upgrades. Any help would be appreciated.

I realize it was not clear from the original post whether or not DiskUtility had been tried yet to fix the hard drive.
To use DiskUtility to repair the drive, you have to boot from the original install disc that shipped with your Mini.
1) Insert the Install disc and the shutdown the Mini.
2) Restart the Mini and hold down the C key as soon as the startup chime or beep is heard. Hold it down until you see the "gear" spinning on the screen.
3) Select your language, but don't proceed any farther with installation. Use the Utilities menu at the top of the screen to run DiskUtility.
4) In DiskUtility, click once on the hard drive in the left panel, then click on the Repair Disk button in the right panel.

My MacBook desktop wallpaper has dissapeared and now its just a blue screen? and my toolbar at the bottom of the screen has dissapeared as well. Please can someone help !!?

my MacBook desktop wallpaper has dissapeared and now its just a blue screen? and my toolbar at the bottom of the screen has dissapeared as well. Please can someone help !!?

Try restarting your Mac.
If that doesn't help, open a Finder window. Select your Home folder (it has a small house icon) in the Sidebar on the left.
Now open the Library folder then the Prefernces folder.
Move the com.apple.desktop.plist file to the Trash. Restart your Mac one more time.

"COM object that has been separated from its underlying RCW cannot be used.

I am constantly getting the following error when closing my app if we viewed/printed a report. What do I need to do to correct this error? For the following error, I opened my app, viewed a report on the screen using the 'CrystalReportViewer', closed the report viewer window, closed my app. When closing the app, the following error occurs.
CR version: 11.5.3300.0
VB.NET v2.
System.Runtime.InteropServices.InvalidComObjectException was unhandled
Message="COM object that has been separated from its underlying RCW cannot be used."
Source="mscorlib"
StackTrace:
       at System.Runtime.InteropServices.UCOMIConnectionPoint.Unadvise(Int32 dwCookie)
       at CrystalDecisions.ReportAppServer.%. {(_ISCDClientDocumentEvents_OnClosedEventHandler u)
       at CrystalDecisions.ReportAppServer.%.remove_OnClosed(_ISCDClientDocumentEvents_OnClosedEventHandler value)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.DisconnectEventRelay()
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper. (Boolean \b, Boolean      )
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Dispose(Boolean bDisposeManaged)
       at System.ComponentModel.Component.Dispose()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument. (Boolean      :)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument. (Boolean      ;)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Close()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.
    (Object      >, EventArgs      ?)

Hello,
First thing is to install Service Pack 6 which you can get from the download page by clicking on BusinessObjests tab above and then downloads on the left...
When you close your viewer be sure to add/have Youreportobject.close and Youreportobject.Dispose. Adding a GC.Collect may help also.
Thank you
Don

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

My macbook pro has been restarting on its own... Been happening again n again? What is the problem and how to solve it?

Laptop has been restarting on its own . Pls provide a solution

I'm not sure if this is what you mean?
Anonymous UUID:       9761D3C3-B36F-9964-C5F1-DE87DDED0120
Sun Apr 20 22:14:52 2014
panic(cpu 2 caller 0xffffff8022edbe2e): Kernel trap at 0xffffff8022ea3f40, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000474, CR3: 0x00000000502d1088, CR4: 0x00000000001606e0
RAX: 0xffffff80234d0320, RBX: 0x000000000000000d, RCX: 0x000000000000000d, RDX: 0x000000000000046c
RSP: 0xffffff8113c1bb20, RBP: 0xffffff8113c1bb40, RSI: 0xffffff8027fba7c0, RDI: 0xffffff80234d03f0
R8: 0xffffff802800b780, R9: 0xffffff8027fb5c20, R10: 0x0000000000000040, R11: 0x0000000000000206
R12: 0xffffff8027fb5b90, R13: 0xffffff803ac4cea0, R14: 0x0000000000000072, R15: 0xffffff8027fb5c20
RFL: 0x0000000000010296, RIP: 0xffffff8022ea3f40, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000474, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff8113c1b7b0 : 0xffffff8022e22fa9
0xffffff8113c1b830 : 0xffffff8022edbe2e
0xffffff8113c1ba00 : 0xffffff8022ef3326
0xffffff8113c1ba20 : 0xffffff8022ea3f40
0xffffff8113c1bb40 : 0xffffff8022ea4be5
0xffffff8113c1bb70 : 0xffffff8022e91623
0xffffff8113c1bc80 : 0xffffff8022e9234c
0xffffff8113c1bcf0 : 0xffffff8022e84f1e
0xffffff8113c1bde0 : 0xffffff8022ead6ef
0xffffff8113c1be20 : 0xffffff8022e616e3
0xffffff8113c1be50 : 0xffffff8022e26bf1
0xffffff8113c1be80 : 0xffffff8022e139f5
0xffffff8113c1bef0 : 0xffffff8022e1e043
0xffffff8113c1bf70 : 0xffffff8022ec976d
0xffffff8113c1bfb0 : 0xffffff8022ef3b46
BSD process name corresponding to current thread: FinderLoadBundle
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:     0x0000000022c00000
Kernel text base: 0xffffff8022e00000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 202534852888
last loaded kext at 33524942317: com.apple.driver.AGPM          100.14.15 (addr 0xffffff7fa4bfb000, size 98304)
loaded kexts:
com.logmein.driver.LogMeInSoundDriver          1.0.0
com.apple.driver.AGPM          100.14.15
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10
com.apple.driver.AppleHDAHardwareConfigDriver          2.6.0f1
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleMikeyDriver          2.6.0f1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleHDA          2.6.0f1
com.apple.driver.AppleIntelHD4000Graphics          8.2.4
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleThunderboltIP          1.1.2
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleIntelFramebufferCapri          8.2.4
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMuxControl          3.4.35
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleIntelMCEReporter          104
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyEventDriver          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleUSBHub          666.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AppleSDXC          1.5.2
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleUSBXHCI          670.4.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.DspFuncLib          2.6.0f1
com.apple.vecLib.kext          1.0.0
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.iokit.IOAudioFamily          1.9.5fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.3f10
com.apple.driver.AppleThunderboltEDMSink          2.1.3
com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOAcceleratorFamily2          98.14
com.apple.AppleGraphicsDeviceControl          3.4.35
com.apple.iokit.IOFireWireIP          2.2.6
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.driver.AppleGraphicsControl          3.4.35
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.AppleHDAController          2.6.0f1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.iokit.IOHDAFamily          2.6.0f1
com.apple.driver.IOPlatformPluginFamily          5.7.0d10
com.apple.driver.AppleSMC          3.1.8
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.driver.AppleThunderboltNHI          2.0.1
com.apple.iokit.IOThunderboltFamily          3.2.7
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IOUSBFamily          675.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0
Unable to gather system configuration information.Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1

Is this possible? -- The servlet itselt has to update all its clients.

Hi,
I need to update the values of clients pages , when ever a request to the servlet arrives.
namely the servlet has to update all its client's HTML pages,when ever a new request is sent from any one of its clients.
for an example.
consider the value of a variable A in servlet is 1, initially
Three pages[b] m1,m2,and m3 are accessing that servlet
and value of[b] A is displayed in m1,m2 and m3
if m1 calls the servlet and updates the value of A to 2.
Then this updation has to be reflected in m2 and m3 also.
This must not be done by the clients,by refreshing itselt, or by sending a request to the servlet at certain intervals.
The servlet itselt has to update all its clients.
Regards
-John-

Not having used pushlets myself, but having heard about them many times before, I took a look at the article.
Interesting. It never closes the connection to the client, so can keep sending additional info. It seems to solve the problem of updating the page. But at what cost?
When does the "updating" of the page stop?
How do you know if the user is still alive?
How many "listeners" will it be able to handle at one time?
Would the users session expire if they left it on this pushlet page?

I want to deauthorise a computer from my account that has had all of its settings wiped already. I go to deauthorise but I am being told I have already deaithorised 5 devices this last 12 months so cannot do again until the 23rd June.

I want to deauthorise a computer from my account that has had all of its settings wiped already. I go to deauthorise but I am being told I have already deaithorised 5 devices this last 12 months so cannot do again until the 23rd June. His is very frustrating as I have just bought a new laptop and I can't use any of my music on it and my old laptop is dead but I can't deauthorise it. Any tips would be great. Have rung apple and they told me I had to wait. Doesn't seem fir when I only have 2 other devices working at the moment.

I don;t know which part of Apple that you rang, but have you tried contacting iTunes Support and asking if they can deauthorise them for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Photos must quit because the photo library has become unavailable or its data is corrupt

Hello,
As many of you, I've installed photos. This is my problem: I am an enthusiastic photographer that keeps around 10K photos per year (approx. 60GB), and while I have several years of pictures, I've just get the last 5 years. To be honest, I never liked iphoto to organize my pictures, I rather use Picasa. The way how pictures get organized, the poor effects tweaks to photos, the lack of freedom to keep an online folder...etc.
But with this new Photos, well, what the heck let's give it a chance.
It seemed cool, all my devices connected, iCloud (very limited storage though), new nice quick effects... the organization of pictures also seemed improved. the UI as usual with apple apps, pretty neat and clean.
Did I mentioned that I have several hundreds of GB of pictures? Well, a detail, I keep it in my time capsule to have them handy when I need it. With picasa, I just need to ensure that time capsule is waked, and pictures get recognized at once.
With photos, I've tried with 1 year, 10,000 pictures and.... very disappointed, it shutdown every 1 minute saying "Photos must quit because the photo library has become unavailable or its data is corrupt"...
Do I missing something here? is this supposed to be better than iPhoto? Time Capsule is not able to send steady signal to get my library online?

Not sure exactly whats going on with that given how new Photos is. But, Picasa works because differently than Photos because it doesn't use a centralized library. Picasa will just scan the entire computer and reference it in that location. Photos libraries, while sometimes problematic, are superior because as you've experience moving all the content is as simply as moving a single file.
Suggestions I would try:
Make sure Photos is quit. Hold down Command + Option on keyboard and click Photos icon to launch. Keep holding until you get a dialog box about repairing the library. Proceed with repair.
Move the library, if size permits, to your local HD on the computer and attempt to open and use.
Create a new library by holding Option on keyboard and launching Photos. Choose to create a new library and make sure it's placed in your ~/Pictures folder. If that works you know its library specific.
Right click on the external drive (also accomplished by holding Control when click), choose get info on the drive. Bottom of new window expand (if not already) the sharing and permissions section. Click lock icon and provide administrator password. If available, which it should be if using same drive for a Time Machine backup, check box to ignore permissions.

Got a used Ipad. restored it. cant get an update for ios7. it has 5 and says its up to date?

got a used Ipad. restored it. cant get an update for ios7. it has 5 and says its up to date?

If it doesn't have a camera it is a iPad 1 and can't be upgraded beyond IOS 5.1.1.

Error message: Photos must quit because the photo library has become unavailable or its data is corrupt.

I suddenly get this error message when trying to open and use Photos. "Photos must quit because the photo library has become unavailable or its data is corrupt."
I can't find a solution to fix the problem.

The only version of iPhoto that works with 10.10.3 is iPhoto 9.6.1 which must be downloaded from the App Store. What version of iPhoto do you have installed?

My ipada mini has over heated and its not starting

my ipada mini has over heated and its not starting

What do you mean by 'frozen' ? Have you tried a soft-reset to see if that gets it to work ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

5.1 or 5.1.2 has brought FCP to its knees!

Similar Messages

Maybe you are looking for