5.1 or 7.1 audio out with hdmi? MBP 15inch 2011

I've gone through two adapters and endless hours of trying to get 5.1 audio to my receiver via hdmi or with optical and I can't seem to get it to work. Well, let me correct myself. I got it to work in osX but whenever I start vlc the audio goes from 7.1 to some random configuration where it only comes out of the side speaker. I can't seem to get dts or ac3 to consistently output from vlc to my receiver. Honestly if I have to use the optical I don't care I just want it to work. I got normal audio but not dts or ac3 to work with osX. Then using bootcamp and windows 7 I got the vlc to output only some ac3 via the optical to the receiver. I never got hdmi sound to output in anything other than 2 channel in windows. Anyway if anyone can spread some light on how to accomplish this it would be greatly appreciated at the moment I am using http://www.kanexlive.com/v2 which they claim will pass uncompressed 5.1/7.1 as well as dts and ac3 through. This entire thing is frustrating. Their technical support is laughable.

If anything, the external decoder is your best bet, as it doesn't require drivers/updates/more money
A product to consider is...
http://www.roxio.com/enu/products/toast/titanium/overview.html
As it authors blurays, excellent interface, options with the software, audio editing. Great for creating movies and such.
Does this answer your question?
Ron

Similar Messages

  • Mini Display supports Audio out on HDMI?

    Hi,
    http://support.apple.com/kb/ts3065
    This tells that mini display supports audio out for hdmi. Does this apply for MBA?
    I can read english pretty well so for those who wants to tell me the article states Macbook (13inch mid 2010) is not MBA, the product description states that moshi mini display supports audio out and MBA.
    Some genius bar folks please advise.

    Hi,
    a loong look at the product desrciption here http://store.apple.com/us/product/H1824ZM/A?mco=MTgxMzM1NzE shows some '*' at "audio support".
    And the '*' then clearly states that *Audio support is only available for MacBook Pro 13/15/17-in. mid-2010 release; iMac 21.5/27-in. early-2010 release".
    So video with it and a MBA => yes ; audio with it and MBA => no.
    Regards
    Stefan

  • Multiple Audio out: usb dac audio out and hdmi out

    Good afternoon everyone, I have a 2010 mac mini with the following audio set up.
    - A usb dac (xtreamer) connected to my stereo amplifier
    - an Hdmi cable to the tv to get  video and audio diretcly to the tv
    Is it possibile by any chance to get simoultanesly audio output both from usb audio out and hdmi audio out???
    In "midi preference panel" I tried to create a "virtual" sound card but i am not able to get sound simoultanesly. or via hdmi, or via usb.
    this is quite disappointing because if I want to listen to music with the amplifier and then watching a simple video with mac mini and tv only I need to go back to the audio preferences and set up manually each time.
    Is it possible to solve this issue???
    Thanks a lot and gretings from Italy

    I can select ATV audio out (Airplay setting) to either my Airport Express or my computer so it must be transmitting via airplay. Using a combination of Airserver, Airfoil and Airfoil Speakers I managed to get the ATV audio content on both my PC and my Airport Express at the same time but it cuts out the ATV audio.
    My aim is to have a movie on ATV transmitting the Audio to ATV AND my stereo (which is hooked up to the Airport Express).
    Cheers

  • I need to have audio out from HDMI and headphone jack simultaneously

    I need to have audio out from HDMI and headphone jack simultaneously.
    I seem to be able to select one or the other, but not both ? !
    Thanks

    No. You can only use one sound output:
    Why can't I select HDMI audio on my Mac mini?
    If you connect an HDMI display or television to a Mac mini (Mid 2010 or later), you might not be able to select the HDMI audio device (in System Preferences > Sound > Output). This can happen if you also have headphones plugged in to the computer. Unplug the headphones to be able to select HDMI audio.
    Mac computers: Frequently asked questions about using HDMI

  • Audio out on HDMI from mac book pro?

    Audio out on HDMI from mac book pro?

    Yes, a retina MBP will support audio via HDMI.
    Ciao.

  • 65x900b - two questions - amazon in dolby 5.1 and using audio out with subwoofer

    Does the amazon app output 5.1 like netflix? I can't seem to find any way to set the amazon audio.Also I have used a 1/8 y adapter and plugged it into the audio out on the TV.  One end of the Y goes to my A/V receiver and the other to the wireless transceiver for the subwoofer.  The cable from the wireless transceiver to the tv is a mono cable so if i have them both plugged into the Y one of the channels cannot be heard.  The subwoofer works fine.  But when I change to audio out like I said I loose one channel.  When I unplug the mini cable from the Y adapter however I get full stereo sound outputting.  Is there anything I can do to resolve this conflict.  Can I use a stereo mini cable for the wireless transceiver for the subwoofer.ThanksLloyd 

    Hi lgroveman, 
    Welcome to the Sony Community! 
    Amazon with Digital Dobly 5.1 is already supported. Please make sure to update your TV to the latest software, kindly check this link for further details and steps by steps procedures. In addition, please make sure to perform the steps below to Refresh the internet content of the TV once the installation is complete. 
    Press the HOME button, then select [Settings] 
    [Network] → [Refresh Internet Content].
    The Analog Audio Out cannot drive both a stereo system and a Subwoofer. If you connect a Subwoofer to the TV SWF-BR100 the frequency response of the audio output is limited to the subwoofer frequencies.
    To output 5.1 surround sound from your TV an ARC (HDMI ) or the Optical Out connection is needed because analog audio out support stereo sound. 
    If my post answers your question, please click the button below "Accept as Solution"
     

  • Audio out from HDMI port?

    I have connected my TV and Booklet via a standard HDMI cable.  This same HDMI cable works fine with my DVD player.   When I use it with my booklet, only video seems to be sent to the TV via the HDMI cable.  Is the HDMI out port supporting only video, or audio as well? I understand the booklet supports HDMI 1.2, which should support an audio profile, as far as I know.
    Let me know if you have been able to get audio to work over HDMI.
    thanks,
    John

    I found your discussion attempting to find the answer to the same question.
    I won 5 of these things at auction and wanted HDMI to be a selling point
    I researched far and wide and now I think I have the answer now.
    I had to reload the OS and  all the drivers for all 5 units
    I read some of the replies to this topic and with some people saying that they had audio and I didn't, I felt that either I was crazy or someone is not truthful. so i had a thought ,
    after about  the 3rd unit I tried to just try to hook it up to a TV bare without Nokia updated software
    What do you know, it worked.
    So I have come to the conclusion based upon using both units after testing them with and without the update, is with the stock driver provided, you will get the audio from the HDMI port; if you update the software from the updater(which I noticed it says the driver is MANDATORY)
    You will not.
    There is a plus and minus on both occassions
    With the graphics driver update you can scale your video once hook to an HDTV to full 1080p HD; but you wont get any audio (at least for now)
    Without the update you will get the audio out , however you will only get the same native resolution as the netbook 720p
    So contemplate which feature is more important you   and make your choice.
    Higher picture quality(full HD) with the driver yet I need 2 cable  (HDMI AND 2.5 to RCA)
    OR lower  resolution720p but audio as well
    I hope this helps but i see my next challenge for both you and is to see if we can roll back the driver if we want audio over HDMI.

  • Retina macbook log out with HDMI Connection

    My macbook pro with retina display has a HDMI port, as most people know, however, every time I connect a display with HDMI, i get logged out, with my session completely lost. Any ideas?
    I'm running OSX 10.8.2

    I'm having the exact same issue with my retina display Macbook as well. Anyone found a solution yet? Very annoying when it kills my whole session!

  • G62-a50sf : (only) audio out over HDMI?

    We have a G62-a50sf notebook at my gf's place that we'd like to use as the source for a (somewhat) audiophile audio set-up.  One possibility to get better-than-headphone-output into a good receiver AND avoid using a separate DAC would be to feed the digital audio output over HDMI to the receiver.
    The question I'm hoping to get an answer to is: will this be possible while retaining video output on the laptop's own screen?
    thanks in advance,
    René

    Sorry, but your Mac doesn't send sound over HDMI, only mid-2010 and later MBP's send sound (and even then some require different adapters).  Yours is a 2009 MBP, so only video will go over the HDMI cable.  You will need to run audio from the audio out to your TV or digital audio out from your optical audio out to your receiver.

  • No digital audio out with mini TOS Link cable.

    In the past I've been able to play audio through my Onkyo receiver and speakers using a mini TOS Link cable. However, today when i plugged the cable in no audio is being sent.
    Things I've discovered:
    1) Audio works for other devices plugged into the same input on the receiver.
    2) The audio plays on the internal Macbook speakers. When I plug in the TOS Link cable during playback it just goes silent.
    3) In the Sound control panel, the output does change to Digital Out. (so the Macbook recognizes the cable)
    4) The red light comes out of the end of the cable that plugs into the receiver.
    5) The receiver normally makes a click sound and switches to a proper sound mode when it detects a digital signal. It does not do when I plug in the TOS Link cable.
    I have rebooted, reset the pram, repaired permissions.

    I am having this same problem, any ideas? Troubleshooted the cord, the mini adapter, the reciever, no dice. It has to be something with software, I had a hard drive crash and it worked before, but not now.

  • Audio out from HDMI to TV cuts out

    I'm looking for help to troubleshoot the following problem:
    I have a brand new iMac, 27", i7 (my first Mac ever). Using the Moshi Mini DisplayPort HDMI adapter, I output video and audio to my LG 55LH90 1080p LED TV. Everything is fine except that approximately every 15 seconds, the audio will cut out for 2 seconds completely.
    The problem occurs regardless of whether the audio is from iTunes, YouTube, VLC, Quicktime, etc.
    Does anyone have any ideas about what could be causing this problem or how to fix it?
    Thanks

    I have solved my problem.
    After spending an inordinate amount of time trying to troubleshoot this (trying different cables, adapters, settings on my TV and iMac, different devices, scouring the internet for help, etc.), and with both LG and Apple customer service pointing the fingers at each other, turns out Apple was right (and LG was incompetent).
    The fix was simple. When I was about to give up, I played around with my TV settings one more time. I disabled the "Clear Voice II" setting on my LG TV and it made the problem go away. Audio is 100% fine over HDMI now. Hurray!

  • Audio issues with HDMI connection

    I just bought a toshiba 40l5200u (40'' 1080p) and I'm having issues with connecting my macbook pro to it with a HDMI cable. The picture looks fine and everything, but the audio is horrible. The bass specifically sounds terrible, very gravelly if that makes sense. Dialogue is usually fine, but when something loud, for example, happens in during a movie the audio (bass mostly) gets very distorted, scratchy, and just a pain to listen to. The audio sounds perfectly fine when I play a DVD through a dvd player, so it the speakers on the tv don't seem to be the problem.
    I was originally using a "Cable Matters Gold Plated Premium Mini DisplayPort | Thunderbolt to HDMI Male to Male Cable in White 10 ft" (here's the Amazon link: http://www.amazon.com/gp/product/B004CADYDO/ref=oh_details_o04_s01_i00?ie=UTF8&p sc=1). I thought the issue might be with the HDMI cable, so I recently bought a "PNY A-DM-HD-W01 Mini DisplayPort to HDMI Adapter" (here's the Amazon link: http://www.amazon.com/gp/product/B007B6YPAM/ref=oh_details_o00_s00_i00?ie=UTF8&p sc=1) and another HDMI cable, "BlueRigger High Speed HDMI cable with Ethernet, Supports 3D and Audio Return" (here's the Amazon link: http://www.amazon.com/gp/product/B003XM9774/ref=oh_details_o00_s00_i01?ie=UTF8&p sc=1) but that didn't fix the problem at all.
    What I can deduce is that the problem isn't with the tv's speakers. Other than that though I have no idea. Any suggestions on what to do? I would be very appreciative. Thanks.

    It sounds like a software problem. Try updating your Flash software and your audio drivers.

  • Dual Audio Outs? / HDMI and RCA Analog at the same time?

    I am trying to figure out if the Apple TV supports dual audio output. My Onkyo receiver supports dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room). The problem is it can only accept an analog source for the second room.
    I know that HDMI takes precedence over component video connections if both are connected.
    Will the ATV send audio signal out of the HDMI and RCA Analog jacks at the same time so I can enjoy streaming music is two rooms simultaneously?

    Iowabeerguy wrote:
    I like to be a helpful soul, so I decided to pull the owner's manual from Onkyo and take a look at the receiver, without ever thinking about the model number, and come to find out, I have my Apple TV hooked into an Onkyo TX-SR606.
    I appreciate that!
    Iowabeerguy wrote:
    Problem is, I have the HDMI into the Onkyo and the analog outs going to to another stereo receiver for the outdoor speakers. Both work at the same time, which means that the Apple TV will output both digital and analog at the same time.
    Good to know.
    Iowabeerguy wrote:
    Now, let's look at the receiver - if you have the HDMI plugged into the - say DVD input, and it's playing through the main system, and you plug the analog outputs into the DVD analog in on the receiver, the Zone 2 out will automatically look at the HDMI input, and not put out anything to the Zone 2 outs, because it won't pass digital to the Zone 2 outs.
    Oh yeah, that makes sense!
    Iowabeerguy wrote:
    I can't try it tonight, but I think if you plug the analog outputs from the Apple TV to an input that isn't assigned to an HDMI in, (like CD) and then set the Zone 2 amp to play that source, it should work.
    I've set aside some "tinkering" time this weekend to try that. I'll let you know if it works; I think it will. Thanks again!

  • Can't get audio/video with hdmi on my tv

    no video or audio on my tv with my hdmi

    Try
    Plug it in first switch on TV, so Macbook will reconise it. In System Preferences,Display etc
    then select Arrangement, . then go back and go into Sound, select Output and tick HDMI cable.? This will get your icons onto your TV and Sound
         try also switching between miror images

  • Audio out via HDMI won't work.

    MacBook Air running lastest Lion will not putout audio via HDMI. Video is good, but audio will only play on Air's speakers not on TV. What can I try?

    When you say the adapter works fine on the TV at the store, you mean the very same one you purchased, or anothre Kanex adapter just like yours?
    Also, if you did in fact take your adapter down to the store, did you also take your HDMI cable? How long is your HDMI cable and have you tried another one?
    And another point...is your notebook set to mirror mode within Displays Preferences under the Arrangement tab? If it is, try turning mirroring off so that the TV can run at its own, independent resolution. See if that helps.

Maybe you are looking for

  • How to buy Mac OSX Mountain Lion without going to Mac AppStore.

    Hello! This is my first post on these forums so please welcome me if you are feeling nice today! Before we get started please note that I know Mavericks is released and it is better, however I need Mountain Lion in this case. I currently can't access

  • Camera Raw showing up double in PSE 8

    Hi After upgrading to PSE 8, the plugin Camera Raw shows up twice in About Plugins (both show Version 5.5.0.97). In the Open as filetype list, I also see two Camera Raw entries, of which one works just fine, the other one leads to error message "This

  • Conversion of binary to number

    Hello, I have a signal conditioner controlled through serial communication with ASCII commands. Once the start command is received, there is a continuous stream of offset binary data sent and read through the serial Read Indicator. The manual informs

  • How do I get a value from a portal form for a non database field ? HELP!!

    I have a form based off of a table that I added a field to. The form is to allow the user to change abbreviation for a department field ie. BIO to BIOL. for a biology department. I have a pl/sql procedure for validation using the custom option on the

  • Can't import Entourage database despite into Mail despite EVERYTHING?

    I want to complete my transition to Apple but have not been able to import my 16GB Entourage 2004 database despite 7 billion (give or take) attempts, and AppleCare support sessions that ended up with the old finger pointing at Microsoft. But rebuildi