5.1 problems with Sound Blaster L

Hello all!
I am having problems with my new 5. setup. I have the Logitech X-530 5. system with 5 satellites (Front: L/R/C, Rear: L/R) and what I believe is a Sound Blaster Li've! 5. card. The model number on the card is CT4780 and it has fi've ports on the back (plus MIDI).
I connected the ports by color and only the Front L/R and sub work. I unplugged Black/Orange, and everything still works. I swapped the orange/black, still nothing. I updated the Windows profile to be 5. surround instead of 2 speakers, that doesn't work. I updated the Creative Labs drivers, that didn't do anything.
I am only getting sound from Front L/R and sub, nothing from Center and Rear R/L. All the connections are secure and in their correct places. I have rebooted 0 times, that didn't do anything.
I am totally lost. Does anyone have any pointers?
[edit]: I am trying to get the sound out of Winamp. I have "Hardware Acceleration" on and have tried everything. The DirectSound plugin shows that only two channels are being used.

I tried resetting the card AND the this:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=2563
Nothing worked.
Please help! I am using the Logitech X-530 speakers.

Similar Messages

Big problems with Sound Blaster

I have a problem with the sound card the system cant detect the sound card.i have tried to acess the device manager and the sound card wasnt detected. the sound card is correctly installed.
Please everyone help i want my sound blaster again
Thanks everyone
Note- when i tried to connect the speakers to the sound card, the system crashed and i restart the computer, after this ,the sound card isnt detected, i think before, the sound card was detected, because the icon of the drivers appeared, but the device manager never detected the sound card, please help me.
Sorry for my english, im portugueseMessage Edited by soundblaster99 on 09-0-2006 03:54 PM

Here's a link on how to use Add/Remove software in Control Panel. After removing the software, remove the soundcard from the computer and reboot. If that boot has no problems, then put the soundcard back in the same slot or a different slot and reinstall.
soundblaster99 wrote:
can you give me the informations to remove the sound card i never removed before, if i can and dont work i will test the sound card in other slot, what you think?
Thanks for the help

Problems with Sound Blaster Live 5.1 (Cannot detect card) (Tryed CTco

Ok I run Sound Blaster Li've 5.
(SB0220)
(C6SB022842604209p)
Using Windows XP Pro SP2
Unfortunetly i cant find the disc that came with my sound card
I recently Reformated my computer and now I can't get my sound to work
http://www.n00bstories.com/image.fetch.php?id=07204808
http://www.n00bstories.com/image.fetch.php?id=24363942
I know the "!" next to Multimedia audio device isnt the problem because that was there before i reformated when the sound worked.
Ive Downloaded both:
Li'veDrvUni-Pack(ENG)
and
Li'veDrvPack_Patch
(Not 00% sure either of these drivers are the right thing for me sense when i type my model number into the driver search box it can't find it for some reason.)
I always get an error message that says "Setup cannot detect sound blaster audio device on your system.
Ive tried using Ctcomp with no luck
Does anyone have any idea on how to get my sound card to work?
Thanks in advance guys

You don't say what drivers your using.
2 threads to look at are http://forums.creative.com/creativel...ssage.id=25677 for drivers, and http://forums.creative.com/creativel...scending&page= for something that might help.You have a SB0228 according to that prefix.
I think to loose that message, you may have to either edit the registry of use something like driver cleaner http://www.drivercleaner.net/
Wow I'm too used to mark up

Problems with Sound Blaster PCI 128 at Wi

Hello,
I've a Sound Blaster PCI 28 Sound Card from Creative. I never had any problems with it when I was using it at WinME. But now I had to install WinXP Prof (incl. SP + SP2) for using some new programs and the soundcard doesn't work at all there.
The card is shown at the device manager at "Other/Unkown devices" as "Audio Controller for Multimedia". I downloaded some drivers from the archi've of the creative homepage witch were said to be for this card used at WinXp. Here are the links for this drivers:
For example:
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=864&dlcentric= 843&Product_Name=PCI+28&OSName=Windows+XP
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=864&dlcentric= 255&Product_Name=PCI+28&OSName=Windows+XP
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=864&dlcentric= 976&Product_Name=PCI+28&OSName=Windows+XP
But none of this drivers can be installed. When I start the installation after some time of loading there appears an alert with says:
"Setup wasn't able to find a Sound Blaster Audiocard on your system. Please make sure that your Soundblaster hardware is installed correctly before starting the setup. Setup will finish/exit now."
Does anyone know how to get this card running on WinXp?
Does anyone know some alterati've drivers witch could be suitable for this card and WinXP?
Thx for help!

Go back to the download link and download the Waveset file. After which, follow the steps from this Knowledgebase article SID930 to install the waveset.
Jason

Problems With Sound Blaster Audigy: New Sys

I just received my new computer from Dell:
Pentium D 3.0ghz
Geforce 7800 GTX 256mb
2 GIGs ram
Windows Xp Prof x64
SoundBlaster Audigy
My problem occurs in my game called Nascar Racing 2003 Season. The sounds play fine, however when It comes time to load more 3dimensional sounds (like cockpit), the sounds turn into a high pitched buzz, and then freezes my computer so that not even ctl-alt-del works. Sometimes this happens when exiting the game as well, and my system does a complete memory dump and then shows this file: ctoss2k.sys..
I've reinstalled the drivers, the game, and I'm out of ideas. I don't have any other games to test this one, but I've run the Dell diagnostics and run the dxdiag for the sound and it passed with flying colors. If nothing can be done here my next idea is getting on the phone with Dell and having them fix my new computer!
Any help would be greatly appreciated!
P.S. On my last computer I had Sound Blaster Li've! and that worked perfectlyMessage Edited by mciarlo on -0-2005 04:05 AM

Noticed your setup (XP PRO 64)
Correct me if Im wrong but I dont think there are drivers for 64bit yet Right?

Problems with SOUND BLASTER LIVE! DIGITAL

Friends,
I have a SB LIVE! 5. DIGITAL. My Windows XP SP2 detects my sound card but he dont know what card is, and i make a download of the lastest driver and he says: YOU DONT HAVE A SOUND BLASTER CARD>
I dont understand what happend, on Windows 98 works well, isn?t a problem with my sound card.
My computer is:
MSI K7N2 DELTA-L
MSI FX5700 ULTRA
768MB DDR 400 SAMSUNG
20GB SAMSUNG 7200
SB LIVE! 5. DIGITAL
DVD-RW LG 6X
I DONT KNOW WHAT TO DO!!!! PLEASE HELP!!!!

Trew,
Did this card come preinstalled in your system? If so this may be an OEM model and you will need to contact the company you purchased your computer from for drivers for it. If this is not the case you may try moving the card to a different PCI slot and trying the install from there.
Jeremy

Problems with sound blaster live 24 b

Hello,
I have some problems with my sound because i'm using a 5. configuration of speakers it works perfectly but if i put my PC on hibernate for example, when i turn it on the configuration changes an the program put the confguration on hearphones and so the sound is very bad. I don't know why it changes alone.
I have a sound card Sound Blaster li've 24 Bits.
Could somebody help me?
Thanks.
Message Edited by dolu on 07-28-2005 :36 AM

dolu,
Your post isn't very clear. When you come out of Hibernate, is the configuration wrong? Or doesn't 5. work then?
Can you provide some more detail on what exactly happens, and also what kind of system (PC) you have.
Cat

Problems with Sound Blaster Live! 5.1 and a freshly reformatted windows 98se

Hello.
Lets get right down to business shall we? I've recently reformatted my computer and reinstalled the somewhat outdated OS windows 98 second edition. I've only recently managed to get my network card and modem working with my refreshed machine again but now I'm having problems getting my sound card (Sound Blaster Li've! 5. Digital) working again too. Its as if the computer CAN'T recognize the fact that there is a sound card inserted into the port. What do I do?

Try the card in another PCI slot to see if it will pick it up then.
Which model is this exactly (like Li've 5. Player, Li've 5. Digital, or another)? Do you know which model number is printed on the card?
It's possible the card doesn't have Windows98 support, newer cards do not support that Operating System so it may not have drivers on the CD for that OS.
Cat

Problems with Sound Blaster Live! 1024 and Windows 2000 Profession

Hello everybody, and thank you since now for your help and support.
Please, forgive my english (I'm italian) not so good, but I hope you can understand me the same.
I have a Sound Blaster Li've! 024, and so far everything works fine with <EM>Windows 98 SE</EM>, but lately I have installed <EM>Windows 2000 Professional </EM>on my PC, and now nothing works.
Nothing, neither the softwares, they don't even start!
Here is what I tried so far:
- First, I tried to install the old version of the programs, the ones that I had in the CD-ROM when I bought the sound card. At this point, I couldn't even uninstall the softwares!
- Then, I tried to update the drivers, but it seems that they're already updated when you install Win2000, and the uninstallation didn't works yet.
- At last, I have downloaded the new software pack, Li'veDrvUni-Pack.exe, but nothing even so. But with this, at least, I was able to uninstall everything from the PC (even if not perfectly).
- Today, I tried to install only the new pack, Li'veDrvUni-Pack.exe, but still nothing works. When I start running the program (e.g. AudioHQ), I can see the hourglass for few seconds and then everything aborts.
Please, help me! What can I do? I really don't want to buy a new sound card, even because my SB Li've! 024 works perfectly until now.
Thank you very much for the attention and for your suggestions.
Andrea Iovinelli

Driver for Sound Blaster Li've! 024 for Vista
i have Sound Blaster Li've! 024 , and Vista, and sound is totaly s*it or not working.. but, you can install drivers from Russians and all will work fine with good quality!
http://kxproject.lugosoft.com
Tags:
SoundBlaster Li've! 024 Vista driver Sound Blaster Li've! 024 for Vista Driver Download Driver For Sound Blaster Li've 024 Vista

Problems With Sound Blaster Audigy 2

The Problem that I'm having is this:
Every time that i bring up the volume console to do whatever, once i move the mouse cursor into the window, my computer either restarts or locks up. Now I have tried over and over again to update all drivers and software for this sound card. Even thinking that it might be a compatibility issue with other cards (video, wireless) i updated their drivers as well. Doing so made me run into other problems, like opening up office Word, just locks up. I never had these problems before at all until i installed this sound card. Now, the card works perfectly! Sound comes out in all respecti've ports and microphone and line in works as well. Its the software that I cant seem to use. I just don't understand why, this is a brand new card with its own software. But to add lastly to this, I formatted hard dri've, installed Windows XP home, then immediately afterwards i installed the drivers and software for the sound card and it worked like nothing was wrong at all, software and all. But once i installed my video drivers and software, either the sound card software didn't work or the operating system would lock up right after the splash load screen. Please, can someone let me know anything that i can do to fix this problem! It's been very bothersome and annoying as all! Thank You.

Alright, I once again formatted the hard dri've. This is what i've done:
Windows XP Home w/SP
All Motherboard Drivers
Disabled On-Board Sound
Installed Audigy 2 ZS Drivers and Software
Removed Wireless Card and Video Capture card
And all Windows OS updates
Direct X 9.0c
But what i haven't done yet is installed the drivers and software for the video card. I have a ATI 9800 XT 256mb AGP card, getting updated drivers for the card is not a problem. But I also didn't install service pack 2 yet either. im trying to figure what is really causing the problem now. But as of now, the sound card and software is working properly. thats pretty much where i stand now, so if there is anyone out there that might now what i can do from here, or what should i NOT do, please let me know!
Thanks again

A few problems with Sound Blaster LI

I recently purchased this card (Soundblaster Li've! 24-bit) and i cant figure out how to get it to work correctly... I am using the Battlefield 2 headset (made by logitech i think) for Teamspeak and the only way i can get the mircrophone to work is by having the EAX console opened up with Karaoke enabled. If I disable it my microphone stops working, or if I deselect the "Microphone effects" box it stops working...also in Battlefield 942 (not sure about BF2) some of the sounds are excelent and some of the sounds (like when your driving a tank/jeep) sound like a garbage disposal with a fork in it... I have messed with the in-game sound settings and the main sound settings/properties under windows. I have updated the drivers for it to the more recent ones but still no difference... I have also uninstalled all the drivers and reinstalled them but still no luck... I have disabled my onboard sound.
I am running windows XP on a P4 2.4 gig with a Asock motherboard
HELP ASAP!:smileyindifferent:
P.S. also is there a way i can, well lets say have my headphones with microphone and my regular 2. speakers plugged in at the same time? and just have some type of program to switch between the two? this is the least of my worries i just want it to work correctly!

well i got the sound quality way up by uninstalling and reinstalling just the most recent driver(not the one on the cd) and that made a world of difference on sound quality but now my mic doesnt work! anyone know how to get the mic to work without installing all that extra EAX crap?
this is becoming one big headache!:angry:

2 diferents outputs with sound blaster platinum ex?

I want to mix with the computer. Can I listen one track on the monitors and other track on my headphones? have the sound blaster audigy platinum ex the multitrack option?
I have Traktor DJ Studio, but i don?t know if the problem is about the target or about the program..
THANKS

GRe: ASIO problems with Sound blaster Audigy Platinum ex and Finale 2009`
Barfdoggy wrote:
Cannot open Finale 2009 at all nor can I get rid of notice that I have ASIO problems with Creative.
Could use some help. I am senior citizen and this is not helping my senility. Thanks!!
Are there error messages coming out?
Which operating system are you using?
NOTE: Samplerate and bit-depth for ASIO in Audigy series cards is fixed to 6-bit/48kHz (and 24-bit/96kHz). If your 'project' is set for 44.kHz, it's possible that you can't get it started.
If you can't get the software started because of ASIO error then, you could try
- temporarily rename ctasio.dll (this file can be found under Windows\System32\) so the software/system can't find it anymore
- install asio4all driver which supports all samplerates your card is able to ( http://www.asio4all.com )
jutapa
@82.8.5.25

Issue with Sound Blaster Live! 24-bit driver

,Issue with Sound Blaster Li've! 24-bit driverw Hello, I have a 2004 Dell Dimension DIM900 and a couple months ago it began making a loud crackling noise sporadically. It sounds like real ear-piercing static, like when a microphone is being plugged in, only in short random bursts at alternating pitches so I originally thought my speakers were blown. I turned them off and decided to use a headphone set only to hear the same annoying sound.
I looked in the sound settings and read that I have a Sound Blaster 24-bit internal driver in my system, assuming that information is correct.
What can I do? I did the search and read the read on those X-Fi drivers that had a similar problem, but I didn't know if that was the same as this because the thread concluded that their problem was exclusi've to systems with Nvidia dual SLI graphic configurations and X-Fi drivers. ? Any input would be appreciated, thanks!

Hi IT5,
May I know if this Li've! 24bit came pre-installed on your Dell computer or did you purchase & install the sound card separately?

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

Problem with sound on iPod Photo

I am having a problem with sound on an iPod Photo. You can hear music for about 5 seconds and then it is silent. I have to turn off the iPod for several seconds. When I turn it back on it will have sound again for about 5 seconds before going silent again. Has anyone else expeirenced this? Any ideas what may be happening

Try these steps one at a time.
The Five Rs.
If nothing helps, you can arrange online service here. This may be more than just a software problem.
Service request.

5.1 problems with Sound Blaster L

Similar Messages

Maybe you are looking for