5.1 Sound Sys

I have an old Creative 5. speakers and the Creative sound blaster li've sound card.
Recently I'm thinking of changing to a new sound card.
To what extecd? or Which sound card I can use for my old 5. speakers?
Please advise.
Thank you.
Eric

uk9xx wrote:
I have an old Creative 5. speakers and the Creative sound blaster li've sound card.
Recently I'm thinking of changing to a new sound card.
To what extecd? or Which sound card I can use for my old 5. speakers?
Please advise.
Thank you.
Eric
Supposeingly, you have analog 5. speaker system there.
If Creative is your only option, I suppose, all/most currently available SB cards are 5. capable (which models are available, depends on, where you come from) .
http://www.soundblaster.com/products/
jutapa

Similar Messages

ATV/Surround Sound Sys

New ATV2. Setup according to directions. Hooked into a Sony Bravia (2 yrs old) system via HDMI. I get picture, YouTube, everything but sound! Turned off Dolby setting (thanx Apple tech support). Now I get sound only through the TV speakers, not the surround system. Advice gratefully sought. Thanx to all.

I have a typical setup also using a Sony Bravia TV (KDL-46V5100) and a digital surround receiver that sounds similar to yours. I use the TV strictly as a video monitor and get the sound strictly out of my receiver which is always on when I watch TV. The Apple TV is hooked up to the TV monitor using an HDMI cable and to the surround receiver using an optical digital cable.
On the Apple TV, under the 'Audio & Video' settings I have 'Dolby Digital' set to 'On'; 'Audio Output' set to 'Auto'; 'HDMI Output' set to 'Auto'.
On the TV, under the 'Sound' menu I have 'Speakers' set to 'Audio System'. This turns off the internal speakers of the TV.
On the Receiver, since the optical cable is connected to the AV input, I have the AV source selected while watching TV.

No sound on surround sound sys

I have a Sound Blaster X-Fi XtremeMusic card and need to know?where to connect the audio plug that leads to my 5. system. Line out has my computer speakers (2.) and I tried connecting the other plug to line-out 2 and then 3 but get no sound. The only way to hear a movie via my computer on my tv and 5. set-up is to use a 2for adapter in line-out with my computer speakers. ?

What kind of speakers are they exactly?
The X-Fi Xtreme Music has 3 outputs on the back of the card, if you are using analog 5. speakers then you should use those outputs.
Check this image of the card.
The outputs you need are:
<TABLE borderColor=white cellSpacing=2 cellPadding=4 bgColor=white border=.5>
<TBODY>
<TR vAlign=center align=left bgColor=#ebebeb>
<TD><A name=wp94575 target=_blank>[/url]
class=pBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN: 0pt 3pt 0pt 2pt; TEXT-TRANSFORM: none; COLOR: #000000; TEXT-INDENT: -2pt; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">2.
</TD>
<TD><A name=wp94578 target=_blank>[/url]
<DIV class=pCellBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; TEXT-TRANSFORM: none; COLOR: #000000; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">Line Out 3 jack </TD>
<TD><A name=wp94580 target=_blank>[/url]
<DIV class=pCellBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; TEXT-TRANSFORM: none; COLOR: #000000; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">Connect the following inputs on powered analog speakers or a home theater receiver to this jack:
<DIV class=pSmartList style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">
<UL class=pSmartList style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">
<DIV class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">
<UL class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none"><A name=wp20294 target=_blank>[/url]
<DIV class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">[*]On 5. systems: Front Center and Subwoofer</LI><A name=wp20322 target=_blank>[/url]
<DIV class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">[*]On 6. systems: Front Center, Subwoofer and Rear Center</LI><A name=wp20338 target=_blank>[/url]
<DIV class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">[*]On 7. systems: Front Center, Subwoofer and Side Left</LI>[/list][/list]</TD></TR>
<TR vAlign=center align=left bgColor=#ebebeb>
<TD><A name=wp94582 target=_blank>[/url]
class=pBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN: 0pt 3pt 0pt 2pt; TEXT-TRANSFORM: none; COLOR: #000000; TEXT-INDENT: -2pt; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">3.
</TD>
<TD><A name=wp94585 target=_blank>[/url]
<DIV class=pCellBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; TEXT-TRANSFORM: none; COLOR: #000000; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">Line Out 2 jack </TD>
<TD><A name=wp94587 target=_blank>[/url]
<DIV class=pCellBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; TEXT-TRANSFORM: none; COLOR: #000000; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">Connect the following inputs on powered analog speakers or a home theater receiver to this jack:
<DIV class=pSmartList style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">
<UL class=pSmartList style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">
<DIV class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">
<UL class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none"><A name=wp20353 target=_blank>[/url]
<DIV class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">[*]On 4., 5. and 6. systems: Rear Left and Rear Right</LI><A name=wp20367 target=_blank>[/url]
<DIV class=pSmartList2 style="MARGIN-TOP: 0pt; FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN-BOTTOM: 0pt; TEXT-TRANSFORM: none; COLOR: #000000; MARGIN-RIGHT: 0pt; FONT-STYLE: normal; TEXT-ALIGN: left; FONT-VARIANT: normal; TEXT-DECORATION: none">[*]On 7. systems: Rear Left, Rear Right and Side Right</LI>[/list][/list]</TD></TR>
<TR vAlign=center align=left bgColor=#ebebeb>
<TD><A name=wp94598 target=_blank>[/url]
class=pBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; MARGIN: 0pt 3pt 0pt 2pt; TEXT-TRANSFORM: none; COLOR: #000000; TEXT-INDENT: -2pt; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">4.
</TD>
<TD><A name=wp9460 target=_blank>[/url]
<DIV class=pCellBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; TEXT-TRANSFORM: none; COLOR: #000000; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">Line Out jack </TD>
<TD><A name=wp94603 target=_blank>[/url]
<DIV class=pCellBody style="FONT-WEIGHT: normal; FONT-SIZE: 9pt; TEXT-TRANSFORM: none; COLOR: #000000; FONT-STYLE: normal; FONT-VARIANT: normal; TEXT-DECORATION: none">Connect the Front Left and Front Right inputs on powered analog speakers or a home theater receiver to this jack. You can also connect your stereo headphones with a 3.50 mm (/8-inch) plug to this jack.</TD></TR></TBODY></TABLE>
Make sure you set the speaker selections to 5. aswell.
Cat

64-bits can't detect sound sys

my computer on normal windows can play sound normally, show me using sound blaster audilogy. when i use 64 bit it shows "no audio device" how do i fix this?

I'v sorted out the problem. Sorry for the inconvenience!

Connecting X-Fi XtremeMusic to 5.1 Surround Sound Sys

I'm trying to connect my Media Centre PC with Sound Blaster X-Fi XtremeMusic to my Samsung HT-UP30 5. Surround Sound System http://downloadcenter.samsung.com/co...62_UP30-GB.pdf?, which has the two aux inputs, which are standard phono connectors. There is also a Digital Optical Input, if that's any use.Currently I'm just using a normal 3.5mm Stereo Plug to 2 Phono Lead but this is only giving me sound to the center left and right speakers.Any suggestions?

If your system doesn't have an analog input with 5. connectors, you're limited to stereo via digital connection. Say "thank you Creative for not supporting digital surround on your cards"!
A sound card that does DTS or DolbyDigital encoding on the fly is what you need to have surround via digital connection.
A, you still can enjoy DVD's in surround via "digital pass-trough". This if you don't like the DVD player that you allready have . The bad part is that your system has only an optical input and your card doesn't have one. Turtle Beach has a sound card with what you need (DolbyDigital li've and optical out), but their EAX implementation (for gaming) is software and a little crappy. Still, it works.
Or you can buy a set of analog surround speakers for PC and connect those at your card. And sell the Samsung thingie.
Or you can buy a receiver with the analog 5. input and digital ones also - that's what I have.
Message Edited by SoNic2367 on 03-2-200602: PM

System sounds do not work since upgrade to ML 10.8/10.8.1

Hello. Since I upgraded to Mountain Lion, I have the persistent problem of my system sounds not working, after my laptop sleeps. Fresh after a restart, they will work..then, after screen saver or sleep, they will not.
Here's what doesn't sound:
- Apple mail sounds (sending, receiving)
- alert sounds
- Sys Pref -> Sound -> any/all sound effect selection
- screen capture click
Here's what always works fine:
- the pop-pop-pop sound when I increase/decrease the volume
- iTunes
- any sound from audio/visual embedded in browsers
- sound from all 3rd party apps
Internal speakers are selected
No problem throwing out sound to airplay, etc.
No problem with non-system non-Mail sounds
All sounds work fine after a restart...but after a sleep or a screen saver, they will cease working until the next restart.
MacBook Air, 10.8.1 (also was noticed under 10.8)
1.7 GHz, 4 GB
I do see posts where people are experiencing the same, but no real solutions. I have found & trashed the prefs file (from other posting solution) but that did not solve this persistent issue. The sounds always DO work fresh after restart...just after sleeping, they do not. Thank you :-)

Yeah, just to keep everyone breathlessly updated: there has been no fix for me.
Amusingly (mostly not..) on the plane yesterday, when I plugged in my headphones, I was greeted with about 3 weeks' worth of Sent Mail and Alert tones. Good times.
The fix involving Audio MIDI Setup and momentarily changing the internal speakers integer dropdown list used to occasionally work for me...but lately it has not. I'm just making do with no mail sounds, like a chump. How I wish GrowlMail worked with 10.8 because I could get my sounds that way.

Various issues since Leopard upgrade

I have just installed Leopard on a Dual 2.7 G5 with a 500GB Hitachi HDD and 5GB RAM and I have noticed one or two niggling little 'quirks' (I am lumping everything together here, rather than separating them in to more appropriate sections, so that I have a record of everything together).
1) I have an Epson Perfection 4870 scanner which I cannot use to scan directly from applications (for quickness I mainly use Preview) as the 'scan' button is always unavailable (greyed out, not highlighted in blue). This has been an issue since at least 10.4.8, so it's not a problem exclusive to Leopard, but it's extremely annoying nonetheless. As I can scan directly from the Epson Scan software (which is basically the driver) Epson will not assist me further and have directed me to Apple/Adobe/MS, etc., for support. Prior to 10.4.8 (IIRC) I could select 'import' (from whatever application) and it would automatically preview, the scan button would then become available and hitting it would launch the driver software. However, the link between the applications and the driver seems to have been severed somehow/somewhere and it is no longer recognising that the unit has finished its preview in order to make the 'scan' button available for the next part of the process.
In Tiger, I could also scan into Epson's EasyScan application, but have been told this isn't 10.5 compatible.
Does the above make sense...? Has anyone else experienced this - and have you solved it? If so, how?
2) This next bit concerns the Dock. I like to have it hidden along the left hand side of the screen, rather than at the bottom, because I only have a 17" panel and desktop space is at a premium. However, about one restart in five, it's back along the bottom and any icons or folders that I have added to it have gone AWOL.
3) The third issue is a sound issue. I have a Revolution 7.1 card which I understand, from reading a notice on M-Audio's Web site, is not yet Leopard compatible (though the promise it will be "very soon"' though as the last driver release didn't support anything newer than 10.4.6, IIRC, I'm not holding my breath!)
So I have removed the card and plugged my Logitech Z5500s back into the 'on board' card. This was working flawlessly under Tiger (I know because I tested it to make sure, because I knew that the Revolution wouldn't function under Leopard). However, whatever I try, I only seem to hear sound from the internal speaker; I even replaced the optical cable (at great expense - the original was a Belkin Gold Series, and so is the replacement and, at about £35 a pop, it's not a trivial outlay). Everything in the sound sys prefs is completely 'greyed out' so I cannot change it from the internal speaker to anything else. Whilst there is nothing on Logitech's Web site as regards to the Leopard compatibility of any of its products (it seems that it gave up on the Mac a very long time ago; I use a MX510 which was the last of their rodents to have any kind of OS X support and that stopped with 10.4.4, IIRC) I cannot see how a set of speakers, which should work with anything that has the required jack sockets, can be fussy about an OS. Incidentally, I also have a 'dark side' box running XP Home (when I win the lottery, I'll buy a Mac Pro and dispense with it) and they're plugged in there and work fine (via analogue, though, not digital).
I noticed it when I received some CDs that I'd ordered from Amazon the other day and found that iTunes was playing through the internal speaker.
4) The final issue is a networking issue. Under Tiger, I could (though it did take me some tweaking to get it working smoothly) dump things from the G5 on to the Windoze box and vice versa, without too many hiccups. However, Leopard is proving to be somewhat of a challenge, to say the least. I don't know how I managed it, but I did manage to render the machine completely inoperable at one point (it would only boot as far as the grey 'Apple logo' screen and I couldn't open the optical drive to stick the DVD in - a panicked phone call to a friend, who runs his own Mac repair and consultancy business, followed!
I don't understand SMB and AFP (though I do know about FTP). In the Finder, I can see the 'doze box and can send things to it (though should I be connected as 'guest'?) but there is nothing on the Windoze side, save for 'Printers and Faxes'). I have made sure I have permissions set correctly and everything is set up to share (and Windows sharing is on) but there is nothing on the other box at all.
Is it possible to share the main HDD across, or am I limited to this silly 'Drop Box' thing (which I did have available under 'doze at one point, though it was read only and I couldn't change permissions from Leopard because I didn't have sufficient privileges, even though I have an admin account and I could change permissions under Tiger with the same level of 'clearance'.)
4) This final issue is sort of linked with 3) as it concerns what I believe to be erroneous error messages. I was clearing some stuff off a drive I was going to use for Time Machine[1], but I wasn't allowed to delete most of it because 'XYZ was in use' or open in an application. Six reboots later, I was still receiving the same error; strikes me that Leopard's got its knickers in a knot somewhere along the line because the files in question (mainly old Word and Excel docs) were certainly NOT in use as I didn't have either installed at the time!
[1]Though having read the problems people are having with TM (not just here, but on other forums I read/post to) I think I might give it a miss and stick with ChronoSync (just have to wait for it to be compatible).
So, this is actually the second installation, but the problems remain - any help out there?
Sorry for the verboseness of this, but I wanted to make sure that I'd covered everything. I'm almost tempted to reinstall Tigger (but not quite - I like Spaces, and I like the Dock Preview).
Cheers for any assistance, folks!
Fran

Fran, I'm not sure I'm going to be much help for all your problems but I will attempt to answer what I can.
1. Scanner problems - have you tried reinstalling the software? I know you mentioned that the easyscan software is not compatible but it sounds like the driver software isn't in the right place. Optionally another program that you might want to look into is vuescan. I have had good success with the program in the past but I have yet to try it under Leopard.
2. Dock problems this sounds like either a corrupted preference list. But I don't have a clue as to why it might be reoccurring. Have you fixed permissions on your computer since installation?
3. I don't have a clue to figure out how to fix this issue.
4. Networking - As for sending things to the doze box. You don't need to be connected as guest. Just use the username and password that you use when you sign into the windows to sign into the windows box and you should have the same rights as you would as if you were using windows on that computer. Yes it is possible to share the main HDD but it isn't something that I would recommend. What I do recommend is creating a folder where you have both read and write rights to and then use that folder share items across both computers. If this isn't something that is going to work for then at the most I would just share your documents folder. You didn't mention how your trying view information on the windows side you should be able to browse your network and eventually find and see the mac.
4 (part 2) - I would recommend something besides TM, it is designed to recover lost/accidentally deleted files. And isn't really designed for being your complete backup program. Yes, you can use it for that but I would recommend something more robust. Some of that comes down to how you want to define your recovery strategy. Superduper!, promotes themselves as having the ability to boot for your backup drive and being able to almost immediately get back in business. If this is a critical factor to you then I would lean in that direction. If you are just worried about having a backup of critical data files then Chronosync or some other program will work just as well. Also mentioned in your post in this paragraph is a description of "files in use" problems. A couple of things come to mind did you let spotlight finish indexing your drive before you tried deleting files? I've run into a problem similar to this in Tiger when I was deleting files while spotlight was indexing.
One item that you didn't mention was what kind of installation you did when you installed Leopard. If you didn't do an 'erase and install" then that might be something to look into. First back up your computer before doing this. You might also want to run a permissions fix on your drive to see if that helps at all.
HTH
Paul

External speakers not muting on headphone plug-in

I have a dual 2.5ghz PPC G5 with external speakers plugged in the back. Sometimes I like to get into the zone and plug in my headphones to listen to music. The problem is, the external speakers don't mute when I plug in my headphones to the front headphone jack. There isn't an option in the Sound Sys. Prefs either.
I swear this used to work on an older Mac or OS (maybe 9 or lower).
Can't this be included in an update to either automatically mute when the headphones are plugged in, or added as an option in the Sound Sys. Prefs?

I went and downloaded this little program to get that functionality back:
http://www.rogueamoeba.com/freebies/
The only somewhat not quite right problem I have is that if you are running certain sound programs, such as Audacity, the switching isn't automatic, you still have to go to the program's preference and manually change output to the headphones. But for Finder and iTunes it works fine.
Francine
Francine
Schwieder

DV7 Running Windows 7 "Pop" in audio or speakers on startup and shutdown

I installed Windows 7 on my DV7-1157cl laptop.
I don't recall having any issues with the sound when I first installed, but there were a bunch of missing drivers immediately following the installation. So I went to the HP driver page and downloaded all of the Windows 7 drivers and installed them.
After installing the drivers, I began hearing a pop in the speakers on startup and shutdown.
I'm sure the problem is with the drivers, because I have since rolled back whatever drivers I could in Device Manager and fixed the pop on startup. I'm still having pop in speakers on shutdown however.
As an aside, I (and Microsoft) were puzzled by HP's insistence that the video drivers for this unit were Nvidia. They're Intel, and the ones WIndows 7 installs do not work properly. We had to go to Intel to find the correct video driver. I'm suspecting something similar with the audio.
This machine is about 1 year old and it is ridiculous that HP is ignoring Windows 7 updates. Any HP engineers listening out there?

i have a dv7i-3300 with the altech lancing sound sys, windows 7 64bit premium, and nvidia chips and graphics. the notebook is 2 days old. fresh install of everything and up to date. the sound pops when i shut down and restart. it doesn't come through the head phones though. i have removed the wireless card (and disabled it's drivers), and I have disabled all other drivers that i could and still boot. the only thing that changes is that the pop goes away on the shut down when i disable the HDT audio CODEC, but it still pops when it boots up. it sounds like the pop is coming throught he base speaker in the bottom of the notebook. I have also turned off the pc speaker (which isn't the same as the base speaker i don't think).
anybody have any new info?

Nokia X3 - screen's dead, I need to extract the co...

Recently, my X3's screen doesn't work any more, nor do the call buttons. I cant turn it off or on and the only thing that makes me guess that it's still working is that the keyboard lights up any time I slide it open. When I link it to nokia pcsuite the program at first starts working normally, but when I try to access the contacts list, it gives me this error message: "unable to modify USB mode, please modify USB mode from the phone", action that I cannot perform since the screen is dead and the buttons don't work. If they worked, I'd have tried modifying the USB mode blindly (it should be easy, since I just have to press the same button once or twice), but unfortunately I can't.
Accessing the phone from my PC is anyway possible, without using pcsuite: I can access its memory (which is E in my computer) and see these folders: "images", "others", "private", "resource", "Sounds", "sys", "System" and "videos", plus a single file named card_content.cid. Starting from here, can anybody suggest me a way to extract the contacts and save them on the PC? I don't need to put them inside another phone, I just need to have them in a readable format, with name and phone number.
Thanks in advance!

Not sure what you mean by 'Call Buttons'.. but atleast the 'Navigation' button needs to be working to set the proper USB mode. As soon as you connect the phone press the Centre of the Navigation button as if you are selecting something from the Menu and check whether it gets connected in the proper (PC Suite) mode ...Else, it seems a bit difficult to extract the Contacts.
..and this is for Future action (for any new phone that you buy)
1.Back-up your data at regular interval. Especially after you add any important data.
2. Set the USB connection mode to PC Suite as default. (for Nokia X3-00 its thru' Menu-->Settings-->Connectivity-->USB Data Cable-->PC Suite). With this, even if the display is not working but the phone is, then it will get connected to PC where you can Back-up / Sync your data thru' Nokia suite..

DIGI 002R with Logic 8.0.2.

It seems that when in use with Logic it gives me almost no control over how loud the volume is. It was blistering loud at first (enough to make my heart race) even though the volume was all the way down. After several attempts to lower it I ended up using the Digi Core Audio Manager to lower the overall output of the digi. This helped bring it down to a reasonably loud level but still no control of the volume.
Not to mention it plays absolutely nothing when trying to play audio from my computer itself (previewing, itunes...)
Are there drivers i'm not aware of?
Message was edited by: YacoTaco

noeqplease wrote:
As far as iTunes, system sounds, etc... you have to tell your mac, in sound preferences to use the digidesign core audio drivers for that.
Oy. Don't get me started on that. If I double-click on a .mov, it opens, but doesn't seem to catch the Digi Core Audio driver, so it's silent. I actually have to launch QuickTime Player first with the Content Guide launch on, and then open the .mov to hear the audio.
The system sounds play through the Mac speaker regardless of the fact that I set the Sound sys prefs to play everything through the Digi box.
I don't get audio when using Leopard's QuickLook on audio and video documents in the Finder.
Sometimes the Digi Core Audio utility doesn't quit, so it keeps my Mac from shutting down.
Sometimes the Digi Core Audio utility won't connect to the Digi box because it thinks it's "in use."
I just gotta say, I had to get the Digi box in order to use Pro Tools and I'm beginning to think that's not a good enough reason. I think I'm gonna hook my MOTU back up and just turn the Digi box on only when I need Pro Tools.
Sorry, this is a totally out of context rant and it's not directed at anyone but Digi, which means posting this in this forum is especially silly.
-droo

Help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Windows latency issues 2-3 days after reboot. Sound/mouse/PC very Choppy - tcpip.sys ndis.sys NETIO.SYS

Alright, so I've tried what feels like everything. First off, I am troubleshooting for WINDOWS 7.
After I reboot, the computer functions relatively fine. Great latency, no choppyness, no matter what I do. About two to three days later, it gets incredibly bad. Specifically when browsing the internet using any browser. The audio becomes terribly choppy
as the mouse lags across the screen. Running LatencyMon, I see tcpip.sys is always at the top. This issue only seems to happen the most when internet activity usage is high. Also, ndis.sys is always up there too, as well as NETIO.SYS
Any help would be so greatly appreciated!! I run a small web server from this PC, so this is quite critical for me. It never used to happen until I recently began getting Pool_corruption blue screens, later to be discovered they were caused by my GIGABYTE
motherboards utility driver files, which I took care of.
I haven't really made any changes to my PC, besides several driver updates in attempt to resolve this. I have since updated my BIOS to the latest version. I even tried using Auslogics Boost Speed to improve the TCP settings based on on my 50mbps internet
speed. Nothing clears the lag, but a reboot, which is temporary. I used to run this PC for up to two weeks before I rebooted, no issues.
Driver Execution Time Screenshot:
http://gyazo.com/7adc868ee2b76dee4ef5c19ad19ce088
LatencyMon log below:
CONCLUSION
Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One or more DPC routines that belong to a driver running in your system appear to be executing
for too long. At least one detected problem appears to be network related. In case you are using a WLAN adapter, try disabling it to get better results. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS
setup. Check for BIOS updates.
LatencyMon has been analyzing your system for 0:16:52 (h:mm:ss) on all processors.
SYSTEM INFORMATION
Computer name: ThisIsAComputerName
OS version: Windows 7 Service Pack 1, 6.1, build: 7601 (x64)
Hardware: Z87X-UD4H, Gigabyte Technology Co., Ltd., Z87X-UD4H-CF
CPU: GenuineIntel Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz
Logical processors: 8
Processor groups: 1
RAM: 16324 MB total
CPU SPEED
Reported CPU speed: 3491.0 MHz
Measured CPU speed: 3868.0 MHz (approx.)
Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.
MEASURED INTERRUPT TO USER PROCESS LATENCIES
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the
signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.
Highest measured interrupt to process latency (µs): 81947.411914
Average measured interrupt to process latency (µs): 8.685069
Highest measured interrupt to DPC latency (µs): 71439.589036
Average measured interrupt to DPC latency (µs): 3.104919
REPORTED ISRs
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.
Highest ISR routine execution time (µs): 147.623890
Driver with highest ISR routine execution time: USBPORT.SYS - USB 1.1 & 2.0 Port Driver, Microsoft Corporation
Highest reported total ISR routine time (%): 0.100862
Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation
Total time spent in ISRs (%) 0.146654
ISR count (execution time <250 µs): 2354800
ISR count (execution time 250-500 µs): 0
ISR count (execution time 500-999 µs): 0
ISR count (execution time 1000-1999 µs): 0
ISR count (execution time 2000-3999 µs): 0
ISR count (execution time >=4000 µs): 0
REPORTED DPCs
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.
Highest DPC routine execution time (µs): 4384.048124
Driver with highest DPC routine execution time: ndis.sys - NDIS 6.20 driver, Microsoft Corporation
Highest reported total DPC routine time (%): 0.031341
Driver with highest DPC total execution time: nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver, Version 347.52 , NVIDIA Corporation
Total time spent in DPCs (%) 0.201231
DPC count (execution time <250 µs): 7333801
DPC count (execution time 250-500 µs): 0
DPC count (execution time 500-999 µs): 423
DPC count (execution time 1000-1999 µs): 433
DPC count (execution time 2000-3999 µs): 7
DPC count (execution time >=4000 µs): 0
REPORTED HARD PAGEFAULTS
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted
and blocked from execution.
NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.
Process with highest pagefault count: avastsvc.exe
Total number of hard pagefaults 1535
Hard pagefault count of hardest hit process: 344
Highest hard pagefault resolution time (µs): 77184.982813
Total time spent in hard pagefaults (%): 0.063944
Number of processes hit: 21
PER CPU DATA
CPU 0 Interrupt cycle time (s): 45.681687
CPU 0 ISR highest execution time (µs): 147.623890
CPU 0 ISR total execution time (s): 11.875990
CPU 0 ISR count: 2354800
CPU 0 DPC highest execution time (µs): 4384.048124
CPU 0 DPC total execution time (s): 13.495186
CPU 0 DPC count: 6501345
CPU 1 Interrupt cycle time (s): 16.680073
CPU 1 ISR highest execution time (µs): 0.0
CPU 1 ISR total execution time (s): 0.0
CPU 1 ISR count: 0
CPU 1 DPC highest execution time (µs): 3350.307935
CPU 1 DPC total execution time (s): 0.426748
CPU 1 DPC count: 107359
CPU 2 Interrupt cycle time (s): 17.093312
CPU 2 ISR highest execution time (µs): 0.0
CPU 2 ISR total execution time (s): 0.0
CPU 2 ISR count: 0
CPU 2 DPC highest execution time (µs): 1974.991693
CPU 2 DPC total execution time (s): 0.441413
CPU 2 DPC count: 122078
CPU 3 Interrupt cycle time (s): 17.086010
CPU 3 ISR highest execution time (µs): 0.0
CPU 3 ISR total execution time (s): 0.0
CPU 3 ISR count: 0
CPU 3 DPC highest execution time (µs): 2766.876540
CPU 3 DPC total execution time (s): 0.269897
CPU 3 DPC count: 65999
CPU 4 Interrupt cycle time (s): 8.237525
CPU 4 ISR highest execution time (µs): 0.0
CPU 4 ISR total execution time (s): 0.0
CPU 4 ISR count: 0
CPU 4 DPC highest execution time (µs): 1918.52220
CPU 4 DPC total execution time (s): 0.618606
CPU 4 DPC count: 220533
CPU 5 Interrupt cycle time (s): 8.578453
CPU 5 ISR highest execution time (µs): 0.0
CPU 5 ISR total execution time (s): 0.0
CPU 5 ISR count: 0
CPU 5 DPC highest execution time (µs): 1899.919794
CPU 5 DPC total execution time (s): 0.206159
CPU 5 DPC count: 56896
CPU 6 Interrupt cycle time (s): 11.541397
CPU 6 ISR highest execution time (µs): 0.0
CPU 6 ISR total execution time (s): 0.0
CPU 6 ISR count: 0
CPU 6 DPC highest execution time (µs): 1861.963334
CPU 6 DPC total execution time (s): 0.358036
CPU 6 DPC count: 108505
CPU 7 Interrupt cycle time (s): 12.079986
CPU 7 ISR highest execution time (µs): 0.0
CPU 7 ISR total execution time (s): 0.0
CPU 7 ISR count: 0
CPU 7 DPC highest execution time (µs): 1797.655113
CPU 7 DPC total execution time (s): 0.479542
CPU 7 DPC count: 151950

Hello and thank you for the reply!
While I am waiting for the issue to start up again, I'd just like to cover some things you mentioned in your post. :)
I only updated the bios because I was originally experiencing these issues. It was a method to hopefully resolve them, which did not work. I was very careful, and the process was a success. I updated to the most recent recommended driver for my motherboard
from the manufacturers.
As for Auslogics Boost Speed, it is not running on my computer, as it is a piece of software I only have used to clean junk files (cache/temp) for a very long time now with no issue. I have also tried updating all of my drivers with success, however that
did not solve the issue either. I even rolled back my network card driver just in case with no luck.
I have not thought of disabling my audio driver yet, being how it effects far more than just my audio when it happens. My mouse is jittery/laggy as well when no sound is playing. But other tests have shown that it may be a network issue. Next time it happens
I'll temporary disable my network drivers to see if that causes the issue to clear up.
I will be sure to mark answers which help appropriately. Thanks again! I should return with the information requested from Zigzag's wiki within 2 days of on-time, when this happens again.

Problems With Sound Blaster Audigy: New Sys

I just received my new computer from Dell:
Pentium D 3.0ghz
Geforce 7800 GTX 256mb
2 GIGs ram
Windows Xp Prof x64
SoundBlaster Audigy
My problem occurs in my game called Nascar Racing 2003 Season. The sounds play fine, however when It comes time to load more 3dimensional sounds (like cockpit), the sounds turn into a high pitched buzz, and then freezes my computer so that not even ctl-alt-del works. Sometimes this happens when exiting the game as well, and my system does a complete memory dump and then shows this file: ctoss2k.sys..
I've reinstalled the drivers, the game, and I'm out of ideas. I don't have any other games to test this one, but I've run the Dell diagnostics and run the dxdiag for the sound and it passed with flying colors. If nothing can be done here my next idea is getting on the phone with Dell and having them fix my new computer!
Any help would be greatly appreciated!
P.S. On my last computer I had Sound Blaster Li've! and that worked perfectlyMessage Edited by mciarlo on -0-2005 04:05 AM

Noticed your setup (XP PRO 64)
Correct me if Im wrong but I dont think there are drivers for 64bit yet Right?

Just bought a Sound Audigy 2 ZS Platinum Pro Need some help hooking to a Home Theatre sys

hi everyone, Im having problems hooking up to my Reciever, I hooked up a optical cable to one of my in's on the back of my reciever to the out of the External I O but i dont hear anything, How do i hook this up, ? thanks.....

btdvox wrote:
everything is connected right but there is no red light, from the tip, and i tried it on my ps2 and xbox and the optical cable is fine.....
If there's no light from the optical i/o then there's no audio signal at all and explain why you have no sound. Make sure you check all the cable including the power cable that you need to connect to the card. Does your power on LED on the external i/o light up? If all power are proper and there's still no light from the optical i/o then probably you have a faulty i/o that need replace.

5.1 Sound Sys

Similar Messages

Maybe you are looking for