5.1 speakerset not working in win8/Z77A-G43

Hello all,
New on this forum, so i will try the get my question/problem clear  .
I recently bought a new desktop with a Z77A-G43 motherboard, this should support a 5.1 speakerset.
So i am trying go get my Logitech X530 speaker to work in windows 8 with specified motherboard. All goes fine with the setup, all tests run and all speakers pass the testsounds on 5.1 and thus are working. However when i start a game only stereo is given (2 front speakers work, all others in deep silence). Same goes when i start VLC to play MP3's, only stereo. After some searching i can not find anything that is wrong, soundfill is checked, room correction is on but no 5.1.
So in a last try i installed AC3filter which sovled this same problem in windows Vista. Result is not a thing, still no 5.1 working.
Please need some help in solving this.
Just downloaded a new driver for the realtek HD, will this resolve my problem? Current driver version is 6.0.1.6657.
Have some screenshot but can't find a way to post them here from my HDD.
Can anyone help me.

Quote from: Chrysomya on 29-April-13, 20:14:26
Just downloaded a new driver for the realtek HD, will this resolve my problem? Current driver version is 6.0.1.6657.
Your issue is drivers related.
For Windows 8 use 6.0.1.6839
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win8%2064

Similar Messages

  • T510 (4484) Card Reader not working in Win8 64

    Hi All,
    I have a problem, card reader is not working in Windows 8, there are no drivers for it, but it is
    recognised in device manager like SDA Standard Compliant  SD Host controler, same way 
    llike in Windows 7, but in windows 7 it is working.
    It is ricoch pcie, but there are no drivers for it.
    hardware ID:  
    PCI\VEN_1180&DEV_E822&SUBSYS_213317AA&REV_01
    Anyone can help me?
    Thanks,
    Petar
    Solved!
    Go to Solution.

    I have found one driver that works,   www.magnetix.rs/activa/E822_X64.zip 
    (From device manager can be installed with driver update)

  • Slimtype BD E DS6E2SH not working on Win8 Pro

    Hi all,
    I installed Win 8 Pro and I noticed that my Blu-ray Optical drive is not working anymore like with Win7.
    I have an ASUS N56VZ and I have not found anything on the ASUS page.
    In the System it is recognized as "Slimtype BD E", but when I put a disc (DVD or BD) inside, it is not read neither loaded; in fact when I check the drive I have this message: "Windows cannot start this hardware device because its configuration information
    (in the registry) is incomplete or damaged. (Code 19)"
    Any hint?
    Thank you in advance

    Have you check the UpperFilters or lowerfilter value in the the following registry?
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Meanwhile, update the graphic card driver and chipset from ASUS website manually. Uninstall the third party software to avoid confliction.
    http://support.asus.com/download.aspx?SLanguage=en&p=3&s=390&m=N56VZ&os=30&hashedid=dQ05pflVfztxEczD
    Niki Han
    TechNet Community Support

  • Secure boot not working with MSI Z77a-G45 And system reserve not showing

    Ok so i re did my windows after i did a zero fill on my hard drive as it was showing a corrupted sector on my disk that seemed to fix it for now, until it comes back if it does crossing my fingers it gone for good. But now i can't seem to get Secure boot to work i mean i did not have it before as i just slapped the motherboard in with a existing windows, that was to be expected but this is a clean install of windows 8.1 and i even have secure boot on but its not working and reports as off in windows.  Is it because i have my bios set to legacy+UEFI??? would that make secure boot not work??. i even went as far as turning it off and back on again the secure boot setting nothing made a difference.  I mean its not a big deal bit would be nice to know why its not working, also another wired thing and i will post pictures of it, as i cant see my system reserved partition in disk management but diskpart says it there, i will post those pictures any ideas??. 

    fixed it is my legacy+uefi another forum got back to me.

  • My firefox will not work with win8.1

    Firefox worked well on my Win8 quad core while Microsoft Explorer constantly crashes. After upgrading to this new Win8.1 today, Firefox will not connect and basically acts as if there is no internet connection at all.

    If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open the crash reports page via "Help > Troubleshooting Information".
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • MFP 177 wireless printing not work on win8.1

    Hi,
    Just bought a HP color Laserjet MFP177 4 in one printer. After installation (and many attempts) i am failng to print from my PC. However it did print the test page at the time of installation and scanning function is working fine.
    Please help

    Hi @Razeen ,
    I see that you are not able to print over the wireless network, but you can scan. I can help you with this.
    Temporarily turn off any Firewalls to make sure they aren't interfering.
    I have provided a document to try and resolve this issue. Also download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it.
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Disregard the title.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Windows 8.1 Print Management - Deployed Printers Not Working for Win8, Just XP, Vista and 7.

    We have deployed printers from the Print Manager MMC to our computers.  However, two new Windows 8.1 computers don't get the printers.  GPResult shows the policy has not applied after many logins.  Is there some change for printers under 8.1?
    Jim Haynie Director of Technology | Chapel Hill-Chauncy Hall School 785 Beaver Street, Waltham, MA 02452 www.chch.org | We Teach the Way Students Learn

    Hi,
    Since the printer policy could not apply to Windows 8.1 machines, please let me know what is the OS version of the printer server? Please try to create a separate GPO using RSAT on Windows
    8.1 machines and only apply to those Windows 8.1 machines to see if it works. Please configure the policy settings under the following path in GPMC: User configuration/Policies/Windows Settings/Deployed Printers.
    Description of Remote Server Administration Tools for Windows 8.1 and Remote Server Administration Tools for Windows 8
    http://support.microsoft.com/kb/2693643/en-us
    Hope this helps.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Andy Qi
    TechNet Community Support

  • Wifi module not work in win8

    TuochSmart 600-1135it,
    modulo wi-fi non viene attivato con win8.1, e non mi dà nessun errore.
    This question was solved.
    View Solution.

    Ciao
    Per favore, vai a Gestione periferiche e fare clic sul controller di rete che necessita di driver.
    Poi inserire l'ID hardware per essa.
    Se non sai dove trovare l'ID hardware, si prega di leggere la guida al link qui sotto.
    http://www.wikihow.com/Find-Hardware-ID
    Hello
    Please go to the device manager and click on the network controller needing drivers.
    Then post the hardware ID for it.
    If you do not know where to find the hardware ID, please read the guide at the link below.

  • MSI GTX 970 not working on MSI z77a-gd65

    The screen only shows a underline in the superior left, lights on, fans on, old vga "MSI GTX 560ti" works normally.
    PC specs.
    MSI z77a-GD65(MS-7751)
    Intel i53570k
    PSU Seasonic 520w model ss520gb active pfc f3 80plus

    Quote from: Svet on 19-March-15, 04:53:06
    have you done a >>Clear CMOS Guide<< with power cord removed?
    what is the mainboard bios version used?
    this mean top left or?
    any boot codes?
     I updated the bios, its working now, thanks for the reply.

  • GE60 0NC-006US Webcam not working after Win8 upgrade or BIOS update

    So, I upgraded my GE60 to Windows 8 a couple of weeks back and decided to install Skype this past weekend. Upon opening Skype, I was told that no webcam could be found. I checked Device Manager and sure enough, no instance of a webcam or driverless device was detected. Now, I did apply the newest BIOS just before upgrading so I assume that could have broken it as well. I followed the BIOS directions given by the instructions provided on the driver page and everything else works. Furthermore, Live Update says I have the most current version. I am wondering what to do next. Should I reapply the BIOS or how can I find out if the laptop even detects the webcam? I mean, not being in Device Manager and even the Devices window, reverting back to 7 probably wouldn't help since Device Manager shows no instance, correct?

    Quote from: Svet on 12-September-12, 23:16:19
    yes update EC too, and do ec reset when its done:
    https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
    Thank you Svet for all of your help. I relayed my issue/resolution here at work and they're all getting a luagh out of it. 

  • Cursor does not works in win8 while updating mozilla

    Hi Team,
    I have been trying to apply update for Firefox v15 and Thunderbird v16 in my PC in office which runs windows 8 OS, but soon after that my keyboard stops working. As with home PC which also runs the same windows 8 OS its going well with out any issue after the updates, i am really confused kindly let me know what i can do to rectify this issue.
    Thanks in advance
    Venkatesh VRH

    Hi cor-el
    Thanks a ton, the problem got resolved by your given solution.
    regards
    Venkatesh VRH

  • Z77A-G43 - DRAM banks 1&2 acting up.

    Hey, guys. Thanks in advance for your time. I know it gets busy around here.
    I am putting together a new system for the wife, and have an odd little issue. The DRAM banks 1 & 2 cause a pre-POST boot-loop when either are used. Banks 3&4 work perfectly. When a stick is in bank 1 or 2, the computer will power on, the fans spin, no video output, then it shuts itself down (regardless of what banks 3 & 4 hold). Repeats a few seconds later. All the usual trouble shooting has gone down. BIOS is all out-of-box default. All the components are brand new, but regardless were systematically replaced/removed one by one to narrow it down to these 2 ram banks. Needless to say, the RAM is fine - tested in two different computers. The memory banks are clean, new, with no visible dirt or damage. It's just odd.
    Code: [Select]
    1   2   3   4     <- Bank # ... X = used ... O = empty
    X   X   X   X = FAIL
    X   O   O   O = FAIL
    O   X   O   O = FAIL
    X   X   O   O = FAIL
    O   O   X   X = OK
    O   O   X   O = OK
    O   O   O   X = OK
    The RAM in use is Kingston HyperX DDR3 1600MHz PC3 12800 4 GB (4 identical sticks = 16gb total) (KHX1600C9D3K2/8GX ). With RAM in memory banks 3 & 4, BIOS tones it down to 1333 from 1600, but that's the least of my worries. BIOS shows the timing as 9/9/9/24 and the voltage around 1.45 (can't remember exactly) even when it's increased to 1.65 (as suggested by the sticky). I also tried going 1 stick at a time but it started acting up as soon as I put anything in bank 3 or 4. There's just a lot of BIOS options that I simply don't know what they do.
    I realize you guys have seen a lot of issues and was curious if you wouldn't mind lending a hand? I know my way around a computer, but certainly don't have the specialty knowledge particular to these pieces of hardware that you guys do. Any help is very appreciated. Please let me know if there's any information I can provide. I am dumping anything I think could be remotely relevant in this message. I really hope it's not a faulty board. Between disassembly and shipping, that would be an awful hassle.
    Here's what I'm working with:
    MSI Z77A-G43 (BIOS v2.2B2)
    Kingston HyperX DDR3 1600MHz PC3 12800 4 GB (4 identical sticks = 16gb total) (KHX1600C9D3K2/8GX )
    Intel Core i5-2500 3.3ghz
    Nvidia GeForce GTX 550 Ti 2gb
    PSU: Cooler Master GX 750W (RS750-ACAAE3-US)
    A-Data 120 GB SATAIII Sandforce SSD (AS510S3-120GM-C)
    Western Digital Caviar Green 2 TB HD (WD20EARX)
    Case: Cooler Master HAF 922 (RC-922M-KKN1-GP)
    No OS has been installed. I didn't want to get too involved until I knew the hardware was staying put.
    Thank you again for your time.

    Quote from: Jack on 14-April-12, 13:42:19
    I think the potential explanations for your problems are only a few.  We can, I think, exclude a memory compatibility problem, since the sticks work fine in other slots.
    In my oppinion, what we are looking at is one of the following things:
    1. A problem with the memory controller (which is inside the processor) = defective CPU
    2. A pin-contact problem between the CPU's contact pads and the board's socket pins causing certain memory slots to be improperly connected to the CPU's memory interface
    3. A short-circuit problem, blocking the functionality of the memory slots (test the board outside the case on a non-conducting surface)
    4. Defective memory slots or a problem in the underlying circuits = defective board
    At your suggestion, I have made a couple of attempts to reseat the CPU (regarding #2). I realize that was a long shot, and not surprised to see no difference. I just wish I had another LGA 1155 CPU to swap out and test #1. I'm going to continue to brainstorm this for a few days before putting in a RMA request.

  • HT4628 The Wifi does not work when Macbook Air is started by Win8. How to let the Wifi work in Win8 ?

    Hi all,
    WIFI of Macbook Air works when the notebook started with OS X.
    But when I restart the Macbook Air with Win8, the Wifi does not work.
    The Macbook Air was bought last month. It is new model. The wifi may be a/c.
    Thanks,

    hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
    ever find a fix for it?

  • Audio not working after I format from win8 to win7

    product no:C0V01EA#ABU
    Model:hp envy sleekbook 6-1126sa
    Memory: 4096MB RAM
    Processor: AMD A6-4455M APU ith Radeon (2CPUs) 2.1GHz
    Hello, I have a problem I was unable to solve. I formated my pc from win8 to win 7 64bit , I installed all the drivers but my audio is not working . I would be glad if you can help me solve this problem.
    Above is my product and model number.

    Hi:
    Please see if this driver works for you...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107001-1&cc=us&dlc=en&lc=en...

  • T420, Win8: webcam not working

    Hi, I'm using T420 with Windows 8 64bit, but the webcam is not recognized. Win8 Camera-App does not recognize the cam, too.
    Message from Microsoft was to contact the manufacturer to support drivers for Win8 64bit.
    BUT: webcam works fine with Skype and with Lenovo AutoLock.
    Fn+F6 shows "Communication Utility Hotkey OSD does not work any more", I can serach a solution online or close the program. Searching online does not work too.
    When will there be a solution to that problem?
    Thanks,
    basstom
    Solved!
    Go to Solution.

    Searching is the answer:
    the post here from @dmckenzies http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Cannot-find-T420S-Windows-8-Integrated-Came... helped, although it belongs to a T420s machine.
    Sorry for spam and for not searching deep enough on the first hand.

Maybe you are looking for