5.1 Surround Export from Audition Gives "Header Error" in Premiere

Hello - I have a finished surround mix that has been exported to 5 mono stems that I need to use for a DVD.  In Audition CC 2014 I created a new multitrack session and selected the, "Surround Stems for Video Master" template.  I verified that all stems are playing on the audio meter and then selected Export / Multitrack Mixdown / Entire Session.  In the export window I selected Wave PCM, 48000 Hz, 5.1, 16 Bit.  The resulting file for the 2:15:00 project is 4.8 GB.  It plays fine in Finder and VLC.  When I try to import the 5.1 Wave file into Premiere CC 2014 I get an error that says, "The file cannot be opened because of a header error."
In Audition I have RF64 support selected.  Is this possibly a file size issue being over 4 GB?  If I set in and out points in Audition and use the same export settings the file imports into Premiere successfully.  I need to use the full quality of the audio file when I export the Dolby AC3 file from Premiere so I do not want to compress this.  Is there any setting that I can change in Premiere?  Has anyone else had success importing a surround file that is larger than 4GB on a Mac?
Thank you!
Specs:  iMac, 3.4 GHz Intel Core i7, latest OS, latest versions of Adobe CC (PP 8.0, Audition 7.0)

I've had the same issue.  Export audio to a MOV or AVI file format in Audition or audacity.  They are movie containers, but hold audio as well, and will get past the 4gb file size limit.
Unfortunately, you cannot export back out of Premiere to audition straight out.  You will have to do one of the following to get it to work how you want:
1. Blade at several points along your initial clips, and then edit in audition (the new spare files will be in place and will work just fine).
2. Use the MOV or AVI audio to replace the audio in the session once you get there.
On the send back to premiere, you'll have to conform to MOV or AVI audio PCM.  Its a bit more work than most are used to, as you'd expect it to "know" the file is too big, but it really cannot tell from the container.  If a limit of a file is about an hour of audio at 96k32bit float, then they could hard limit that by seconds count, and switch to using MOV instead, which would still function normally, and they wouldn't have to do anything else.  Or they could add support for W64 and larger formats.

Similar Messages

  • Exports From Audition CC Give "Header Error" in Premiere Pro CS6

    Hello,
    I have finished the audio mixing on a 15 track project in Audition CC. It is very heavy so I had to export all the tracks separately to import them back into the Premiere Pro CS6 movie project. That way I could also do further adjustments in individual tracks later on directly on Premiere, if needed (since mixing isn´t something we´re ever done with).
    I´ve exported them all in wav 9600 Hz 32 bit (Audition doesn´t say whether it´s floating point or not) and also wav 9600 Hz 24 bit. The originals on all the tracks were eitther wav 9600 Hz 24 bit, or wav 9600 Hz 32 bit (converted from 24 bit to aplly declipping and normalization), except 2 tracks with music that had mp3, wav and m4a.
    When importing the exported Audition files back into Premiere all of the 15 tracks, including the ones that didn´t have mp3 and m4a in it, give me the message "The file cannot be opened because of a header error".
    Questions:
    1. What could be wrong?
    2. In case there isn´t a solution, what would be the best lossless formats to try and do the exports for importing into Premiere?
    Thanks a lot.

    I see...
    Trouble is I´ve never had an answer for my posts in the Audition forum (I did originally post this here because I thought it´s more of a Premiere issue, though). I guess Audition just isn´t nearly as widely used as Premiere.
    Also, I have done the same kind of exports for smaller tracks from Audition before and didn´t have an issue importing them into Premiere.
    I find it really troubling that Adobe intends to make Audition a reliable pro audio suite integrated with Premiere and, on top of some weird issues like this one (and such as the 16 bit limit for sending a project from Premiere to Audition, making that integration probably useless for most pro uses), there´s so little support.
    But thanks a lot, anyways!

  • I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

    I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
    Windows 7 64
    PC

    everything works on a laptop (

  • Launching iStore from jDeveloper gives Application Error

    Hi All,
    Launching iStore from Jdeveloper gives application error. I am new to this arena. Here is the actual description.
    We are on 11.5.9 system however applied the RUP1 of Sales and Marketing for 11.5.10 which inturn gave us the 11.5.10 iStore.
    I am using jDeveloper 10g with J2SE 1.4.2_06 as per the instruction. Intially all the test files for db , session worked fine as per the suggestions from oracle Metalink Note# 419887.1 . I could also load the login page initially though upon entering the login details it gets me to the same application error page. After some clearning of cache files and reloading the jdeveloper this time it does not even take me to the login page and gives the application error message.
    Here is the acutal message : The application is currently not available or an unexpected error has occured. Please try again later.
    If this message persists, please contact the system administrator.
    I can login to the UI from the actual server but not sure why it does not work from the jdev. Please guide me and let me know what went wrong. Here is the sample guest log file.
    15:40:4:391 [Session.checkContextValues] party id is null
    15:40:4:422 [Session.setParty] Enter: party id=null
    15:40:4:422 [Session.getCustomerId] Enter: GUEST
    15:40:4:438 [Session.getCustomerId] Call stmt.executeQuery
    15:40:4:469 [Session.getCustomerId] Call rset.next()
    15:40:4:485 [Session.getCustomerId] Get customer id
    15:40:4:501 [Session.getCustomerId] customerId is 82238
    15:40:4:516 [Session.getCustomerId] Exit
    15:40:4:516 [Session.setParty] partyId = 82238
    15:40:4:516 [Session.getPartyType] Enter 82238
    15:40:4:547 [Session.getPartyType] party type = PERSON
    15:40:4:594 [Session.setParty] party type = PERSON
    15:40:4:594 [Session.setParty] user is individual user
    15:40:4:657 [Person.findByPartyId] query: SELECT PARTY_ID,PARTY_NUMBER,PARTY_NAME, PERSON_FIRST_NAME, PERSON_MIDDLE_NAME, PERSON_LAST_NAME,OBJECT_VERSION_NUMBER, STATUS, STATUS_CODE FROM HZ_PARTIES P, FND_USER F , JTF_UM_USERTYPE_REG UT WHERE P.PARTY_ID = F.CUSTOMER_ID(+) AND UT.USER_ID(+) = F.USER_ID AND P.PARTY_ID=:1 AND P.PARTY_TYPE IN ('PERSON','PARTY_RELATIONSHIP')
    15:40:4:797 [StoreProfileCacheLoader.load] Enter
    15:40:4:813 [StoreProfileCacheLoader.load] val = nul
    15:40:4:813 [StoreProfileCacheLoader.load] Exit
    15:40:4:829 [IBEUtil.getStoreProfile] IBE_DIAG_EMAIL_ADDRESS=null
    15:40:4:860 [IBEUtil.getSpecificProfile] Enter; profile=IBE_DIAG_EMAIL_ADDRESS applId=null respId=null
    15:40:4:876 [IBEUtil.getSpecificProfile] Exception caught: Exhausted Resultset
    15:40:4:876 [IBEUtil.getSpecificProfile] value=null
    15:40:4:891 [IBEUtil.getSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
    15:40:4:891 [IBEUtil.getStoreSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
    15:40:4:891 [ibeCZzdError.jsp] Email: null
    15:40:4:907 [RequestCtx.end] PERF: REQUEST STOP
    Thank You
    Srikanth

    You're in the wrong forum. This one is dedicated to Oracle forms. Try either the eBusiness-forum, or the JDeveloper-forum.

  • Emailing from LR4 gives internal error

    Emailing from LR4 (export for email), gives the following error, "An internal error has occurred: There is something wrong in CryptUnprotectData."  I am not trying to interface with Facebook, but use a gmail account for email.  Does anyone know how to solve this error?

    I input a solution at : http://forums.adobe.com/message/4503213.
    Thanks,
    Emily

  • CSV export from SSRS gives an extra header

    I have an SSRS report which I am exporting to CSV. The report doesn't have a header and it is perfect when I run and it. But, when I export it to CSV, it gives me the names of the textboxes as the header. I tried setting 'DataElementOutput' property to 'NO
    Output'. I also tried changing the rsReportServer config file for no header. None of these worked. Can somebody help me fix this.
    Thanks in advance.

    Hi Bindu,
    By design, SQL Server Reporting Services render a report to CSV format with text boxes' name in detail section as columns' name, not the table header when you view the table. So if we want to hide the header row of the tablix in CSV format, please double
    check the steps below to enable the “NoHeader” setting in the RSReportserver.config file:
    Please navigate to RSReportserver.config file: <drive:>\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer \RSReportserver.config.
    Backup the RSReportserver.config file before we modify it, open the RSReportserver.config file with Notepad format.
    In the <Render> section, add the new code for the CSV extension like this:
    < Extension Name="CSV"   Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
    <Configuration>
    <DeviceInfo>
    <NoHeader>True</NoHeader>
    </DeviceInfo>
    </Configuration>
    < /Extension>
    Save the RSReportserver.config file.
    Besides, If we could build the URL for when user want to export without header, try adding NOHEADER=true in the URL.
    For more information about CSV Device Information Settings, please see:
    http://msdn.microsoft.com/en-us/library/ms155365.aspx
    If you have any other questions, please feel free to ask.
    Thanks,
    Katherine xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Export from Speedgrade gives me "Reel Not Loaded" grey box

    Thanks in advance for any help.
    I sent to Speedgrade from Premiere pro... It didn't load correctly (it gave me reel not loaded errors") so I went to my desktop and added all the dpx files into a new timeline and closed the first one.  Then I proceeded to color correct the ensuing timeline.  All is happy so far. 
    Then I went to output and chose Apple Pro Res 444 @23.976 FPS and rendered.  When I imported the clip into Premiere Pro some of the color corrected clips made it fine, but others were simply represented by a little grey box in the top left corner which gives me the name of the file (00.00.01.15-clip...) and says "Reel not loaded".
    When I watch the clips in the timeline they look great.  What am I doing wrong in the export?
    Please help.
    Thanks.

    Did you ever figure this out. I am having the exact same issue.
    I sent my project from premiere pro 6 to adobe speedgrade and a bunch of the reels would not load, so I removed the video track and loaded the reels from the desktop by navigating to th efolder where PP6 created the .dpx files.
    That LOOKED like it worked.
    Th ereels that were not loaded and represented by the grey screen were playing and fully editable, but not that I sent th efootage to AfterEffects to kill a few dead pixels I see that those clips that said that they had not loaded before still have not "loaded"
    Everything plays fine in the timeline, but the output gives me the "reel not loaded..." error message.
    ... This is the first time this has happened to me with SG after producing 4 30-40 minute projects, and this is supposed to be a rush job.
    Any insight?

  • CSV export from SSRS gives a line break if there are two tables

    I have a report with two tables. There is no gap between in the reports. The report looks good when I run it, but when I export the report to CSV, there is an extra line between the two tables. Can somebody help me fix this issue.
    Thanks in advance.
     

    Hi Bindu,
    If I understand correctly, you have two tables in the report. When you export to CSV, it has an extra blank line between these two tables. I have create a simple report in my test environment, I can reproduce the same issue.
    Based on your description, you want to splice these two tables with no gap in the report. I order to meet your requirement, we can use subreport to work around the issue. We can insert two aubreports in one table. Then, display these two tables in these
    two subreports.
    Reference: Subreports
    Alternatively, we can display these data in one table to work around the issue. If possible, you can post your sample data, we can to do further analysis. If these columns is from two datasets, please check if there has same fields. If so, we can use
    Lookup function to display two datasets data in one tablix.
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • Exporting Prem Proj from AE gives an error when importing

    When I export a .prproj from After Effects and then open it in Premiere, I get this puzzling error. Everything seems fine enough. But I can't find any reference to "desktop mode" in the Adobe help. Using CS5 of both versions and not using dynamic link.

    It's called "Custom" in CS5.5
    Create a custom sequence preset
    The message you are getting only means that your Ae comp
    does not fit exactly into one of the built-in sequence settings
    that are in Premiere.
    Can you still clear the message and open your Ae project?

  • Calling a plSQL Procedure from ODI gives an error

    Hi,
    I created a procedure in oracle db using sql developer
    CREATE OR REPLACE
    PROCEDURE GET_EMP_NAME
    ( emp_number IN NUMBER
    , emp_name OUT VARCHAR2
    ) AS
    BEGIN
    SELECT ename into emp_name from emp
    where empno = emp_number;
    dbms_output.put_line(emp_name);
    EXCEPTION
    when no_data_found then
    dbms_output.put_line('no such employee exists');
    END GET_EMP_NAME;
    and then i created a procedure in ODI to call that procedure under 'Command on Source'.
    Technology : Oracle
    Schema: Scott_Local (thats where i created the procedure in db)
    DECALRE
    EMP_NAME VARCHAR2(10);
    begin
    SCOTT_LOCAL.GET_EMP_NAME(7369, EMP_NAME);
    end;
    but when i execute this procedure in odi, it gives me the following error:
    Caused By: java.sql.SQLException: Missing IN or OUT parameter at index :: 1
    any help would bbe much appreciated, m new to odi

    Hi,
    Try this,
    DECLARE
    EMP_NUMBER NUMBER;
    EMP_NAME VARCHAR2(200);
    BEGIN
    EMP_NUMBER := 7369;
    GET_EMP_NAME(
    EMP_NUMBER => EMP_NUMBER,
    EMP_NAME => EMP_NAME
    +);+
    DBMS_OUTPUT.PUT_LINE('EMP_NAME = ' || EMP_NAME);
    END;
    Thanks,
    Guru

  • Export from FCP to edit in Adobe Premiere

    I need to export 3 hours of HDV footage for a client who plans to edit it in Premiere. I know when I capture it and give it to him it doesn't work. What is the best way to export all the footage to give him to edit? I looked into uncompressed 8 bit but it said it'd be about 400 gigs per hour and I can't have that large of files and since it's already HDV I know it is compressed, whats the best way to do this? Thanks

    If that codec is too big, then you need to look at third party solutions. SHEER by Bitjazz is cross platform.
    Otherwise, like stated, output to tape and get that to the Premiere guy.
    Shane

  • PDF export from Pages fails "Print - error while printing"

    Every month I have been generating PDF versions of my invoices by using the 'export' function of Pages. This has always worked fine without any problems.
    Today (end of Feb 08), the pdf export function always fails with 'Print - error while printing". A pdf file is saved to disc but it is corrupted and unreadable. I can still export as rtfd.
    I don't see anything about this in the logs, but I do notice that there was a Pages software update to 3.0.2 earlier this month.
    Anybody know how to fix this?

    Hello
    Before re-installing, it may be useful to
    a - repair permissions with Disk Utility
    b - trash the preferences file: <bootVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.plis t
    if it's not sufficient, try to print from an other user account.
    If it works this way, you will know that the application's files are not the wrongdoers as every account calls the same application file.
    Yvan KOENIG (from FRANCE samedi 1 mars 2008 15:33:41)

  • Exporting from Aperture - .DS Store error

    When I try to export a photo to my desktop, I get this error: 0 (of 1) file has been exported to: Users/*****/Desktop/.DS_Store The export operation failed to create a file for the version identified below:
    IMG_4496
    What do I do to fix this? I tried export to different folders besides the desktop and I get the same error. I tried repairing permissions (on my Mac) and tried fixing permissions and repairing the library in Aperture.
    Thanks.

    Users/*****/Desktop/.DS_Store
    Aperture is creating a wrong filename on export. What is the export preset you are using?
    Try, if you can export at all by using a different preset in the export dialog, like "jpeg half size" or something.
    If that does not work, try to delete the export preset list from the user library:
    Quit Aperture and remove this file: 
    /Users/your-user_name/Library/Application Support/Aperture/Export Presets.plist
    Then log off and on again, and try, if it now is working.
    Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
    Quit Aperture, if it is running. Log off and on again.
    Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
    In the widow that will open, scroll down to "Application Support", open the "Aperture" folder.
    From the "Apertue" folder  remove "Export Presets.plist".

  • CSCui55504 - show Mac address table from RP gives an error msg and40;but from SP works )

    Hello Cisco,
    Is there any updates or ETA regarding this bug, as our production 6500 core switch is experiencing this issue and viewing mac-table is a critical activity we perform everyday to troubleshoot client connections.

    I'm having this same issue. I also have this line in my log, which is curious:
    12/14/14 7:13:07.822 PM netbiosd[16766]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
    Is this related to the problem? What does it mean?
    My 2010 27" iMac running Yosemite won't wake up from sleep.

  • After Upgrade to Netweaver, opening pdf from portal gives an error

    After an upgrade to Netweaver 4.0, the following code for opening a pdf file constructed from a byte stream passed from an RFC fails.
    Document doc = new Document(PageSize.A4);
    javax.servlet.http.HttpServletResponse myResponse = request.getServletResponse(true);
    myResponse.setHeader("Content-Disposition","attachment;filename=\"AIPDoc.pdf\"");
    myResponse.setContentType("application/pdf");
    ByteArrayOutputStream baosPdf = new ByteArrayOutputStream();
    OutputStream os = myResponse.getOutputStream();
    os.write(pdfResult);
    PdfWriter.getInstance(doc, os);
    It throws a "file not found error" on opening directly. However, if saved and viewed; it opens fine. I believe we need to specify the portal url in the filename but not sure.
    Thanks,
    Devina

    Hi Devina,
    We are also opening a pdf file constructed from a byte stream passed from an RFC.  Our problem is that we are experiencing inconsistent results.  The file appears to open on some PC workstations but not on others.  When it doesn't work we simply get a blank screen in the window.  Did you resolve your issue?  If so, perhaps you can provide us with some suggestions for solving our problem.
    Thank you,
    Angie

Maybe you are looking for