5.1 Surround Output
Hi, I have an Intel Core Duo Macbook pro and want to set it up with my home cinema system. I am using an optical link to my AV receiver and it receives stereo sound fine but does not seem to recognise 5.1 surround sound from DVDs that I play on the macbook.
Any clues? As I understand it, using the optical link I should be able to do this.
Thanks
Open /Utilities/Audio MIDI Setup
Select the Output
Click [Configure Speakers]
Click [Multichannel]
Select 5:1
Close Audio MIDI Setup
(Note this will only be available/visible when
connected)
Hi, thanks for that but I have tried it and find that when I go into the menu, all other options but Stereo are greyed out. I have tried with and without the audio cable attached?
The cable works fine with my separate DVD player and with stereo sound from the MBP so I don't think it's that.
I'm stuck!?
Similar Messages
-
How to assign Surround output to stereo track
Question says it. Does anyone know how to do this?
Right, it doesn't change in the Inspector as well.
Here's what I did. I had just installed Logic for the first time yesterday. I have an 828MKIII as my i/o. That was already set under Core Audio output. I created a new project and chose the empty project from templates. I then chose 1 audio track from the next dialog. I tried from there to choose a surround output, but it would only let me choose from a set of stereo outputs, i.e., Output 9-10 which is the 828's Main Out 1-2. So I chose that.
At that point, I tried to change it from both the fader and the inspector, to no avail.
EDITED: Spoke too soon. I recreated the project from scratch and I must have done something different the first time, because this time, from the inspector, I was able to choose surround.
So thanks, guys -
I setup the audio's output to surround, then the surround Master appears. However, Logic still has stereo output 1-2, there's nothing like surround output 1-6 . Is there anything like Surround output 1-6 instead of stero output 1-2,3-4,5-6 for the phsical outputs?
Thanks!No, I'm afraid not. The only way you get full surround sound out of your Creative soundcard is if the audio file is already encoded as Dolby Digital or, perhaps, DTS. The Creative card decodes this to your 5.1 surround channels. Audition outputs six separate audio streams for which you need a multichannel soundcard which has multichannel drivers. The Creative one doesn't AFAIAA.
-
Audigy 4 = Still no digital surround output for games? *si
C'mon guys. How long is it gonna take for you to add digital surround encoding, so we can plug a single digital cable from the sound card to a home receiver's Dolby Digital/DTS input? Before you reply and say that the current Audigy's already do this for DVDs and games with AC-3 sound, let me say that I am not talking about that. Nearly all games on the market have 4+ channels of sound (and are not DVD/AC-3 games) and there still isn't a sound card on the market that puts out a digital encoding of this multi-channel sound. The only solution that did this is the now discontinued nVidia Soundstorm on their AMD nForce 2 chipsets.
The only possible reasons I can think of are:
) Licensing fees from Dolby labs to encode content are cost-prohibiti've
2) The CPU overhead to encode everything in AC-3 would be high enough to have an adverse effect on games' framerate
3) No company thinks there is enough of a demand to engineer such an option.
Can we get a comment from Creative Labs, other than "there are no plans to implement this in the foreseeable future" =)
Having said this, I still like the Audigy sound cards, but I think this added feature would appeal to a larger audience than you might realize. At the very least, you could post a poll or do some online research in the enthusiast community to gauge possible demand.
ThanksBollwerk,
I will pass your suggestions on to our suggestion group.
Do take into account that currently real time Dolby Digital encoding results in a lower sound quality than what we currently are producing on our Audigy 2 ZS and Audigy 4 Pro cards from our analog outputs. The signal that is produced by the onboard sound cards that do this encoding is encoded at a quality that is below the standard quality found on DVD movies and Games that incorporate Dolby Digital content. This also does result in a higher taxing of the processor which then results in more potential for slower performance in games.
Jeremy -
5.1 AC3 Surround Output
How can I get my MacPro to output the same -format- (PCM Dolby Surround) signal
that comes out of my stand-alone JVC DVD Player.
On my old G4 I have a M-Audio card that does this.
But I was hoping that the MacPro would just do this out of one of its own ports.In DVD Player's "Disc Setup" preference, set "Audio output" to "Digital Output".
-
Why does Quad surround output 2 extra channels?
I'm running Logic Pro X, and when I try to bounce my project as an interleaved quadraphonic surround file, instead of 4 channels, the final file has 6. I know that this is due to the fact that Logic considers the "Center" and "LFE" tracks to be separate from the other surround tracks, but for my purposes I absolutely need the file to be only 4 channels. Is there some way to stop quad from outputting the extra two channels?
The way that the scaling works for DAQmx tasks changed somewhere between DAQmx 7.? and DAQmx 8.8.
At least it did for analog inputs anyway.
Check if any scale is applied to your analog output task. Try changing it.
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle -
What would be preventing my system from outputting surround audio from Audition? Creative SBX-fi Extreme Music, Windows7Pro, tested setup in Windows and all speakers reproduce perfectly. Audition's preferences only give me ASIO Front L/R for mapping choices and a hardware choice of MME or ASIO, both only give me two speakers. I'm sure it's a simple thing that my old brain is missing. Thanks, rg
No, I'm afraid not. The only way you get full surround sound out of your Creative soundcard is if the audio file is already encoded as Dolby Digital or, perhaps, DTS. The Creative card decodes this to your 5.1 surround channels. Audition outputs six separate audio streams for which you need a multichannel soundcard which has multichannel drivers. The Creative one doesn't AFAIAA.
-
How to configure my 5.1 surround output?
Hi everyone,
I am looking for a way to use the Digidesign '96 I/O' audio interface as the 5.1 output for the OS X DVD player.
Everything works fine in stereo. The core audio driver talks to the interface, everything sounds fine...
But I couldn't figure out how to set up the rear speakers, center and LFE. The AMS shows only 2 outpus (greyed out) for the 'Digidesign HW'.
I am using a Mac Pro, OS 10.4, Pro Tools|HD 7.3 with all the latest updates.
I need this to check other DVDs as reference for my productions and to play DVDs customers bring in.
Your help is highly appreciated!
Thanks!
JanNot sure if this helps or not, but go to Applications > Utilities > Audio MIDI Setup > highlight the Output Device in the side list and click Configure Speakers...
Select Multichannel, then 5.1 instead of Stereo
If you do not see Multichannel or 5.1 is grayed out in Configure Speakers, then click on the + and add a different Device Output to work with. -
Please delete this post.
sounds like u are going from optical on tv to surround. if so try going straight from stb to receiver. switching cables from stb to tv is going to make a difference.
-
How to get Surround Sound 7.1 output out of all speakers?
Hi all... I moved my system from Ubuntu recently and am having one small issue that I haven't been able to solve; everything else is working great and I'm about ready to move all of my other systems to Arch also, once I've solved this. :-)
The one nagging issue I'm having is with sound. This is a fiber digital connection that was working on the ubuntu install and a couple other distros I play with, but I haven't been able to find the issue in Arch. Sound comes out of only the front-left and front-right speakers. When I do the sound test, it lists all of the other 7.1 speakers, but no sound out of anything other than the front 2 speakers. I noticed that I don't have an asound.conf, so I was wondering if that might help or if it's not needed with Arch?
sound.conf contains the following:
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
/proc/asound/cards contains:
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf9cf4000 irq 22
arecord -L shows:
default:CARD=Intel
HDA Intel, ALC1200 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC1200 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
If anyone has any pointers, it would really be appreciated. I'm begging for help. ;-)Thanks! :LOL: - those were 2 of the url's I've been looking through (in addition to the alsa faq, some stuff on the ubuntu, gentoo and xbmc forums).
I've setup an asound.conf and am about to give that a test.
--edit--
Well, that didn't solve it. I'll have to keep trying. :-(
If anyone has managed to get surround sound working out of more than just the front 2 speakers, I'd love to hear how you did it. ;-)
Mine is connected via digital, so it's beginning to look like I need to set spdif up somehow.
But... Now that I think about it, it 'should' be pretty easy since all I basically need is for it to force all raw audio out the fiber digital connection since the receiver actually handles all of the decoding (dang....it worked great in Ubuntu, now if I can just figure it out in Arch). LOL
Thanks!!
Last edited by jackmetal (2009-12-12 20:43:32) -
I would like to knows if its possible to assign the surround output to a bus and after that to a output.
The reason is my show are in a round theater and the audience are moving.
Sometime the L speaker is the center or the back one.
I have to make something like a matrix with the bus and the output.
Can you help me
Thanks everybody.
Mario B.Thanks! :LOL: - those were 2 of the url's I've been looking through (in addition to the alsa faq, some stuff on the ubuntu, gentoo and xbmc forums).
I've setup an asound.conf and am about to give that a test.
--edit--
Well, that didn't solve it. I'll have to keep trying. :-(
If anyone has managed to get surround sound working out of more than just the front 2 speakers, I'd love to hear how you did it. ;-)
Mine is connected via digital, so it's beginning to look like I need to set spdif up somehow.
But... Now that I think about it, it 'should' be pretty easy since all I basically need is for it to force all raw audio out the fiber digital connection since the receiver actually handles all of the decoding (dang....it worked great in Ubuntu, now if I can just figure it out in Arch). LOL
Thanks!!
Last edited by jackmetal (2009-12-12 20:43:32) -
Asrock ION330/Nvidia HDMI - No audio output
Machine was running archlinux and not been upgraded in over 6mths but HDMI audio worked fine. Decided to do a scratch build since all the changes in that time and have a nice clean system.
If it helps, this is what I install. Ssed this exact same install process for another Asrock ION330 and Acer Revo3610 (both same hardware) but neither use HDMI at all. Both VGA with either optical or analog audio. Both work with no additional config.
pacman -Sy nfs-utils screen ntp alsa-utils mlocate xorg-server xorg-xinit xorg-server-utils mesa nvidia ttf-dejavu xfce4 gamin slim mythtv unrar lirc xbmc wget
Get no sound output but also zero errors on any of the following commands. I should add that the receiver does not detect any audio coming in, ie it usually identifies how many channels of audio and type it is receiving.
aplay /usr/share/sounds/alsa/Front_Center.wav
speaker-test -Dhdmi:NVidia -c 6
aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Output of devices and modules:
[root@lounge ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@lounge ~]# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
[root@lounge ~]# lsmod |grep "snd"
snd_hda_codec_hdmi 27561 1
snd_hda_codec_via 38667 1
snd_hda_intel 27668 0
snd_hda_codec 100743 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60157 7 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5443 1 snd
Tried a couple different things either from the wiki or google searching, individually with a reboot between but no change.
# Keep snd-pcsp from being loaded as first soundcard
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=-2
# something i used on the old working system, doesn't help but not sure why I did it
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=2
#no modprobe conf, try wiki
vi ~/.asoundrc
defaults.pcm.card 0
defaults.pcm.device 3
defaults.ctl.card 0
Here is the output of alsa info script (http://www.alsa-project.org/main/index. … p_To_Debug) with all defaults, ie no modprobe changes etc.
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.61
!!Script ran on: Fri Mar 1 02:42:57 UTC 2013
!!Linux Distribution
Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
Firmware Version: P1.60
!!Kernel Information
Kernel release: 3.7.9-2-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.7.9-2-ARCH
Library version: 1.0.26
Utilities version: 1.0.26
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 21
!!PCI Soundcards installed in the system
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:08.0 0403: 10de:0ac0 (rev b1)
Subsystem: 1849:0397
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
--startcollapse--
Codec: VIA VT1708S
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11060397
Subsystem Id: 0x18490397
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Surround Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="VT1708S Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Control: name="PCM Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="PCM Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Line Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Line Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x19 0x19] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 7
0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
Control: name="Input Source", index=0, device=0
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 6
0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Surround Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x01a19036: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x6
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Control: name="Line Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x0181303e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x3, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x42a190f8: [N/A] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x8
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x503701f7: [N/A] CD at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
Control: name="SPDIF Phantom Jack", index=0, device=0
Pincap 0x00000010: OUT
Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel
Conn = Optical, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Center Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Center Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Switch", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x25
Codec: Nvidia MCP79/7A HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de0007
Subsystem Id: 0x10de0101
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x18560110: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560121: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560122: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x08
Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560123: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x3
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0a
Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560124: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x4
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 8 Mar 1 13:41 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Mar 1 13:41 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 6 Mar 1 13:41 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 5 Mar 1 13:41 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Mar 1 13:41 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Mar 1 13:41 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Mar 1 13:41 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 1 Mar 1 13:41 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Mar 1 13:41 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 1 13:41 .
drwxr-xr-x 3 root root 240 Mar 1 13:41 ..
lrwxrwxrwx 1 root root 12 Mar 1 13:41 pci-0000:00:08.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [NVidia]
Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21'
Mixer name : 'Nvidia MCP79/7A HDMI'
Components : 'HDA:11060397,18490397,00100000 HDA:10de0007,10de0101,00100100'
Controls : 43
Simple ctrls : 17
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Dynamic Power-Control',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Line' 'Stereo Mixer'
Item0: 'Mic'
Simple mixer control 'Smart 5.1',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.NVidia {
control.1 {
iface MIXER
name 'Front Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Surround Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.4 {
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Center Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.6 {
iface MIXER
name 'Center Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.7 {
iface MIXER
name 'LFE Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.8 {
iface MIXER
name 'LFE Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'PCM Playback Volume'
value.0 25
value.1 25
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 300
dbvalue.1 300
control.10 {
iface MIXER
name 'PCM Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.11 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.12 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.13 {
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.14 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.15 {
iface MIXER
name 'Input Source'
value Mic
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Mic
item.1 Line
item.2 'Stereo Mixer'
control.16 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.17 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.18 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.19 {
iface MIXER
name 'Line Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.20 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3075
dbvalue.0 0
dbvalue.1 0
control.21 {
iface MIXER
name 'Smart 5.1'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.22 {
iface MIXER
name 'Dynamic Power-Control'
value Disabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
control.23 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.25 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.26 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.27 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.28 {
iface MIXER
name 'Master Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.29 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.30 {
iface CARD
name 'Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.31 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.32 {
iface CARD
name 'Line Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.33 {
iface CARD
name 'SPDIF Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.34 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
comment {
access read
type INTEGER
count 6
range '0 - 27'
control.35 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.36 {
iface PCM
name 'Capture Channel Map'
index 1
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.37 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.38 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.39 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.40 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.41 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.42 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.43 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access read
type INTEGER
count 8
range '0 - 27'
--endcollapse--
!!All Loaded Modules
Module
nfsv4
auth_rpcgss
nvidia
snd_hda_codec_hdmi
ir_lirc_codec
lirc_dev
joydev
ir_mce_kbd_decoder
ir_sanyo_decoder
ir_sony_decoder
hid_generic
ir_jvc_decoder
usbhid
ir_nec_decoder
snd_hda_codec_via
hid
mceusb
rc_core
snd_hda_intel
i2c_nforce2
i2c_core
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
forcedeth
snd
soundcore
shpchp
pci_hotplug
evdev
psmouse
mperf
serio_raw
pcspkr
button
processor
wmi
coretemp
microcode
nfs
lockd
sunrpc
fscache
ext4
crc16
jbd2
mbcache
usb_storage
sr_mod
cdrom
sd_mod
ohci_hcd
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x19 0x410110f2
0x1a 0x01a19036
0x1b 0x0181303e
0x1c 0x01014010
0x1d 0x422140f0
0x1e 0x42a190f8
0x1f 0x503701f7
0x20 0x074511f0
0x21 0x474411f0
0x22 0x410160f1
0x23 0x410120f4
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x18560110
0x07 0x58560121
0x09 0x58560122
0x0b 0x58560123
0x0d 0x58560124
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
[ 6.093571] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 6.093614] hda_intel: Disabling MSI
[ 6.093710] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 6.743392] IR keymap rc-rc6-mce not found
[ 7.150166] Disabling lock debugging due to kernel taint
[ 7.450271] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
[ 7.450581] input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
[ 7.450836] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 7.451099] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 7.453217] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
FWIW, I even tried changing the HDMI cable, turning the amp on before or after the PC etc. No change.
Last edited by dave00 (2013-03-01 03:03:42)Default install, clean boot and I get this error but the info above indicates there is a sound device. Confused!
[root@lounge ~]# systemctl status alsa-restore.service
alsa-restore.service - Restore Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-restore.service; static)
Active: inactive (dead) since Fri 2013-03-01 18:01:19 EST; 1min 2s ago
Process: 241 ExecStart=/usr/sbin/alsactl restore (code=exited, status=19)
Mar 01 18:01:18 lounge systemd[1]: Starting Restore Sound Card State...
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
[root@lounge ~]# systemctl status alsa-store.service
alsa-store.service - Store Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-store.service; static)
Active: inactive (dead)
Mar 01 13:41:03 lounge systemd[1]: Started Store Sound Card State.
Mar 01 13:45:54 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 13:45:55 lounge systemd[1]: Started Store Sound Card State.
Mar 01 14:04:19 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:25:11 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:25:11 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:39:05 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:39:05 lounge systemd[1]: Started Store Sound Card State.
Mar 01 18:00:51 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 18:00:51 lounge systemd[1]: Started Store Sound Card State.
Journal
Mar 01 18:01:19 lounge kernel: hda_intel: Disabling MSI
Mar 01 18:01:19 lounge kernel: snd_hda_intel 0000:00:08.0: setting latency timer to 64
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
Mar 01 18:01:20 lounge systemd[1]: Started Linux Infrared Remote Control.
Mar 01 18:01:22 lounge kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
Mar 01 18:01:22 lounge systemd[1]: Starting Sound Card.
Mar 01 18:01:22 lounge systemd[1]: Reached target Sound Card.
Edit: Am I correct in saying that the issue is because alsactl restore is running before the sound card?
Last edited by dave00 (2013-03-01 07:30:12) -
Hi there,
a year ago I created a stereo session to make a multisession mix in Audition 5.5. But now I want to use this mix to create a surround 5.1 mix. But I just cant do it. I changed the output from every track to Default Surround Output, used the track panner and then I exported the entire session as the multitrack mixdown, choosing the 5.1 mixdown option. But I just can't get it to work..... All I get is a wav with complete silence.
So then I thought: why not go back to version 3, with which I made surround-CDs in the past? The 5.1-output was 6 separate wav-files and I used other software to create the surroundfiles. So I tried to export my multitrack mix to separate wav-files by choosing File - Export - Multitrack mixdown - Entire session and there checking all the single tracks I want to export instead of choosing Master - Stereo or Master - 5.1. But what happens then is that I get all single wav-files (so far so good, because I can load these into version 3 and then make a surround), but half of the wav-files is 1 Kb. The rest is OK.
Then I tried to open the Audition 5.5 session in version 3, but that doesn't work either. Is there a way to export the session so I can open it in version 3? I tried with XML, but that doesn't seem to work......
Can anyone help me? Or tell me where I can find a very detailed (step-by-step) manual how to create a surround wavfile that Nero Burning ROM will accept to burn a surround CD? Or is this impossible, because I chose a stereo-session instead of a 5.1-session and do I have to create a new 5.1-session and do the mixing all over again?? Hope not....
Thank you in advance!
TonThank you for your reply. Of course all the tracks are routed through the master. And it's always the same tracks that will show up being 1 Kb large. I compared every setting (as far as I know) of working tracks with non-working ones, but I can't see any differences, so to me it's a complete mystery as well why these tracks show up like this, while other tracks are just fine.
I opened a sesx file and saw that this is XML as well. Didn't think of checking that, so thanks for your help. Now I'm going to try and change it manually to a surround session, like you did succesfully. It's worth a try. Better than spending 60 bucks on the Translator tool and not knowing it it'll do the job . Besides, it's for one mix only......
Is it possible that I'm not getting a correct surround wav file because I didn't choose a surround session? Is that why I get a wav file that's empty, complete silence?? If so, it's strange that one can add the output to a multitrack 5.1 mixdown..... why is that possibility not greyed out ?
Thanks again for your help! Appreciate it!
Ton -
Insert Match EQ in 2 of 4 outputs??
Hi,
I'm working on a big quadraphonic documentary project (4 video screens, each 1 speaker), and Logic is doing this smoothly. So far, so good. The problem is that I only have 1 good set of speakers. For the "rear speakers" I use an old Philips multimedia speaker set. I recorded white noise coming from the good speakers and white noise from the Philips, and with these 2 audio files I created a Match EQ that kind of makes the Philips speakers similar to the good monitors (cool Logic feature!).
Now the question... is there a trick to insert the Match EQ in output 3-4?? Outputs are JUST outputs, so they don't have plugin slots... If I'd be working in stereo, I'd probably know a trick or 2, but all 70+ tracks have surround outputs...
Thanks!
Regards,
JaapOutputs definitely have plugin slots.
Oh, maybe you need to create an "object" (channel strip) for Output 3&4. So...
Go into the Environment, Mixer layer. New > Channel Strip > Output. Once that's created, assign it to Output 3/4. Use the text tool to rename it. Done!
There are other ways to do it too:
Select and CMD-C copy your existing Output 1/2 ("stereo out") in the Environment's mixer layer. CMD-V paste. Now you have a copy of it. Change its assignment to Output 3/4 via the "channel" parameter. Make sure you select from the stereo output menu. Now, use the text tool to re-name this new output.
Done! -
Greetings!
I want to use my computer to send a 5.1 surround sound signal to my Onkyo receiver. I have a headphone jack-sized SPDIF port, which I think allows for surround output.
Additionally, when I tested my Realtek digital output device, the green lights go on but I have no sound (which I'm thinkin' may be a result of the wrong cables I'm using, headphone to RCA).
What do I need and how do I make my computer output surround sound?
Thanks!Surround sound mixing is done in Soundtrack Pro. FCP isn't capable of surround mixing.
Shane
Maybe you are looking for
-
IOS 7.0.3 issues-iMessage, FaceTime, Push Notifications not working
I recently upgraded to iOS 7.0.3. Now I cannot sign in to FaceTime or iMessage, and Push Notifications don't work-instead, I receive a message saying "Connect to iTunes to use Push Notifications." I've connected to and synced with iTunes. It didn't w
-
After updating to ios5 i cant find any of my tones that i purchased.
they show in itunes but cant get them to the phone. is anyone else having this problem? did anyone else find out how to get around this. have like $20.00 in ring tones i'd hate to have to buy them again.
-
Best method to make alignment correction
Hi, I'm a newbie here. I'm working on some report and I would like some gurus could give me a hint on Oracle Apps report for changing cosmetic update (eg: alignment, sizing and etc) as I cannot run it on my local environment. Last time when I can run
-
I have created custom infotype with 2 fields in HCM created server proxy at receiver side in HCM. I need code for Execute Asynchronous method in order to update infotype with two fields . Rating(values 1,2,3 etc) Rating Description(exellent,good,not
-
Connection getting lost on Mac Pro running mavericks
We have replaced one of our old Xserve fileservers with a new Mac Pro running Mavericks. This is one of four systems we use to reduce dense geospatial data into descriptive assets. Up to 20 iMac workstations can be accessing data on this server sim