5.1 surround sound adaptor?

I have just bought an imac (late 2012) and would like to use my existing 5.1 surround speakers with it.
the connection is not just one plug into the back of the pc that I could switch to the audio socket on the mac. there are 3 audio cables to the pc - they go to ports called sub, rear and out.
please can someone pooint me in the direction of an adaptor to take these from a 3 plub configuration to 1 (ideally to the audio so that I am not using 1 of only 4 usb ports)
Thank you.
(Am UK based)
Karen

Hello Karen,
Not sure what kind of plugs your speakers have, but ??? ...
http://www.smarthome.com/97374/USB-5-1-Channel-Surround-Sound-Speaker-Adapter-AA 1500/p.aspx

Similar Messages

I blew my surround sound adaptor

I had my tunes blastin up full for a an hour or two and blew the ac/ac power adaptor does anyone know where i can get another one cheaply for the spec i left below i know maplins have them for £20
240vac input / 18vac output 2.5a

yea i contacted philips they gave me a number to fone of there service team in holland kinda weird i thought but ill phone them 2moro. The adaptor that came with it was really a piece of poo.

Can I connect imac to HDMI and also Surround sound also through HDMI using the thunderbolt sockets via an adaptor into a HDMI?

I want to be able to connect my imac to my TV and Surround Sound, from what I have read the best want of doing this is both via HDMI. Before I go out and buy another adaptor for a second thunderbolt to HDMI I was wondering if this would work? I basically I want to be able to stream videos from Imac to TV with sound coming through surround sound and also when I am on itunes have the music come through the surround sound. At the moment I have an adaptor (thunderbolt to HDMI) which goes into the TV and a optical cable from TV into the surround sound, then I also have a 3.5mm from the imac to the Surround sound, but I find this lacks in quailty. Would upgrading to a HDMI work and be better ? Should I also look into an optical cable though I dont see how to connect this to the imac?

OK. From what I can tell here, the Sony HT-SF2000 has 3 HDMI inputs & one HDMI output, so the simplest hookup would be to connect the iMac to one of the the Sony's HDMI inputs via the Thunderbolt-HDMI adaptor, & connect the Sony's HDMI output to the TV's HDMI input.
Use the Sony like an HDMI input selector for the TV (plugging in your other HDMI devices, if any, to it). Use the HDMI input on it from the iMac for both movie & iTunes sound output, & for TV output for video. (You can even use the TV as a second screen for the iMac.)
If for some reason you want a separate input for the iMac's sound output, you can use the optical input on the Sony for that, with a TOSLINK cable connection to the iMac. You will need either a Mini-TOSLINK adaptor or a TOSLINK to mini-TOSLINK cable to connect to the audio output of the iMac.

Using sky go from Mac air to TV and surround sound speakers

I have skygo, and want to watch it on my tv through HDMI cable, can I use logitech surround sound pc speakers too somehow?

As your TV has HDMI inputs which will support sound as well as video, use a MiniDisplay port to HDMI cable (Mini DisplayPort to HDMI Cable by Cablesson works great) or a MiniDisplay port to HDMI adaptor and HDMI to HDMI if not. Just make sure the adaptor supports audio as well as video. Just select HDMI in the Preferences Sound
And yes, you could use your surround sound speakers via the 3.5 mm headphone jack, just make sure you select this option in Preferences Sound if you're not using the HDMI for sound

Surround Sound Trouble

I have an amplifier which is capable of various surround sound arrangements, i.e. DTS and Prologic, and a Macbook connected to it via TosLink. I acquired an album with DTS audio and managed to encode the contents into 5.1 channel WAV files (L R C LFE Ls Rs) which work in Quicktime. Unfortunately, despite the fact that it recognizes that these channels exist, it plays them through my amp as stereo. However, I've been unsuccessful playing the audio in surround sound.
Audio MIDI Setup does not act as though my computer is capable of going beyond stereo audio. When I tell it to use Encoded Digital Audio as its output format, its System Output menu reverts to "None Selected" and does not allow me to change it. In addition, in the Configure Speakers pane, when I select Multichannel, the menu next to it where I select my speaker arrangement has 5.1 surround, 6.1 surround, etc. grayed out, leaving my only option as "stereo." I understand that programs such as DVD player can play surround sound by using output options separate from the system options, but for programs such as iTunes and Quicktime which don't have this option how do I play 5.1 audio?
As a side note, iTunes refuses to add the files to its library. Is there another multichannel audio format which iTunes accepts, and if so how do I convert the WAVs or DTS files to it? It isn't essential that I am able to use iTunes, but I am very keen on Front Row.
Thanks for reading!
2 GHz Macbook Core Duo (White) Mac OS X (10.4.8) 1 GB RAM

So you have a DTS audio DVD.
You say you've "encode the contents into 5.1 wav files which work in QT".
How did you manage to decode the DTS stream into WAV files?
How many QT files do you have?
What you should do is to let your receiver do the decoding of the DTS stream, and just get your Macbook to send that stream to the receiver via whatever TosLink adaptor you already have.
iTunes is ONLY stereo, so if you have a multichannel WAV file, it won't read it. Also, I'm sure there are restrictions on bit depth, so if you have 24 bit WAV files, I'm guessing that also won't work in iTunes.

Sony Surround Sound Query

Hello People,
I've read a few posts already submitted on here, but cannot fathom out the answer, so I'll reinvent the wheel with my question now...
I have a Sony Surround sound 5.1 system with floor speakers, base tube and under tv speaker (not sure that's totally relevent). At the rear of the surround sound unit there are the audio cables, white, yellow and red. These were plugged into the respective three ports in the Sony DVd Recorder which I also have.
So.... I've unplugged the white and red cables from the dvd recorder and plugged into the back of the BTV Box. I have surround sound, but I cannot get a digital picture.
It all seems a little clunky and cumbersome, kind of wished I'd kept my original set up of the Sony system as it was easy, although I wanted the Vision packages.
Confused??? I am!!!
Ta for your help

Guilobo is correct, the yellow is the video out. You need a scart to composite audio phono cable or adaptor such as these examples:
http://goo.gl/8c6YE
http://goo.gl/RtTNW
I've seen them in pound shops and they come with XBoxes etc.

How to enable Surround Sound via Optical line?

Hi, I have been having problems outputting Dolby Digital 5.1 from my Mac to my Panasonic Home Theatre Reciever, When I insert the Optical line with the adaptor, It only gives me the option to send Stereo channels. No options for 5.1/6.1/7.1(Rear/Center)
However, I can use Dolby Pro Logic as another way of Dolby Digital. But I wanted to get actual Dolby Digital 5.1 Surround sound. I don't want to use more space on my MacBook Pro's HDD. Just to encode another movie/TV episode. (a.k.a Family Guy)
Is there a way I can install AC3 on my MBP?
I would appreciate everyone's help!

I Found out the problem. When I was hooking everything up, I kept the t.v. on so I can assign audio inputs with the onscreen display. If the T.V. is left on....only stereo outputted. When I turned the t.v. off and with the airport express plugged into AUX, I was able to switch between surround sound settings.
so the moral of the story is, turn off video devices when you just want sound, especially if they are hooked up to the AVR with HDMI.

Using 5.1 Surround Sound w/ MacBook Pro

I have an existing Logitec z506 PC surround sound system hookd into my HP Pavillion desktop so I can get surround sound from it (back, center, front/sub). I also have HDMI from my HP to the TV to get video. Now the new retina Macbook Pro has HDMI for video but doesn't have the same green, black and orange ports for audio as my HP does. I'm thinking I'll need a new surround sound setup for my Macbook Pro. It would also be nice to use it with my AppleTV, Xbox 360, etc. I think all these devices, including my TV and my desktop have an optical audio connection. Is there a cable that goes from optical to a different 5.1 surround sound system? I wan't the true 5.1 center, sub, front left, front right, back left and back right working with all my stuff, specifically MacBook Pro. Will I need a dedicated AV reciever for this?

here is a link to the cable --
http://www.amazon.com/AmazonBasics-Digital-Optical-Audio-Toslink/dp/B001TH7GSW/r ef=pd_bxgy_e_text_y
and here is a link to the adaptors --
http://www.amazon.com/Toslink-To-Optical-Mini-Adapter/dp/B0002MQGRM
printout the pictures, and take them with you to your local store.
(I do not know if your computer has the capability to do 5.1 output)

Mini display port surround sound

Hi there.
I've hooked up my 13" macbook pro to my Onkyo av amp using a Cablesson mini display to HDMI adaptor. I'm then into the amp via XO Cables HDMI. In theory everything supports up to 8 channels. When I play a movie though I get stereo. DVD player seems to try playing 5.1 but just sends it to front left and right. Playing a movie in iTunes though plays pink noise if I select the surround sound option but plays stereo fine.
Am i missing something here? feels like it does not support 5.1 but all the specs say it does. Any ideas much appreciated.
John

all sorted. Got to go into Audio Midi set up and oddly select 2ch 24bit. Then it works. Yay!

Is it even possible to edit surround sound on a Mac Pro?!?!?!

Hello,
I've just been reading this thread:
http://discussions.apple.com/thread.jspa?messageID=2924869?
Which among many things discusses the fact that Mac Pros, even through an optical cable, are not capable of exporting live 5.1 audio - they can only playback already encoded 5.1 dolby audio from DVD's for example. Apparently the optical out is a purely stereo affair otherwise. I've finally received my Logitech 5450 speakers (took weeks and weeks) and hooked them up. They can indeed playback 5.1 from a DVD, which is splendid. However, one of the things I was most looking forward to was working on surround mixes in Soundtrack Pro. However, firstly STP doesn't want to convert stereo files into surround (like the video online showed), but only means that the surround panner pans between the two front speakers. (I know there's another thread about that, but the proposed solution of adjusting the collapse slider does nothing).
Secondly, and perhaps more confusingly, if I load an actual 5.1 file from the STP content, it still doesn't play in proper surround - the centre speaker kind of works and I think something's rumbling through the subwoofer, but both of the left speakers and right speakers are 'compressed' into the front one alone - nothing comes out of the rear speakers (they are perfectly connected I assure you!). In other words, f I move the puck in the surround panner so it's solely on the front right, and then over to the rear right, it's exactly the same (coming out the front).
I'm sure there must be a solution. Why would Apple advertise the ease with which one can now mix surround if the Mac Pro (I'm not exactly talking about a mac mini here) cannot export live 5.1?
Something which I'm sure is related, but which I can't solve, is that if I go into Audio MIDI setup in Utilities, and try and 'Configure Speakers', only two channels are recognised, and it won't let me select any of the multichannel options (such as 5.1, which is greyed out.)
Anyone know what I'm going on about? I'm totally lost - not really an audio person in general, but hoping to enrich my short films with some surround magic.
Any help greatly appreciated!
Steve
Mac Pro Mac OS X (10.4.8)
Mac Pro Mac OS X (10.4.8)

Typically 5.1 is mixed, and monitored on a 5.1 monitoring system, which means you need an audio interface and setup capable of outputting six channels of audio.
So of course the Mac Pro is capable, but not without additional multi-channel playback and monitoring hardware.
Encoded surround sound, which you hear on playback from things like a DVD, is entirely different story and the encoding is done at the end of the mixing/mastering process. Sometimes you will encode a mix in a variety of formats, Dolby Pro Logic, DTS etc.

Not able to get the sound from my tv to come through my surround sound speakers

I have a new Samsung 46" tv and a new yamaha receiver also a new Samsung blu-ray player. I currently have an HDMI cable going from my tv to my receiver and a short HDMI cable going to my Blu-ray player and the old style red and white rca cables from my tv to my receiver. The surround sound works great when playing the blu-ray but no luck when watching regular tv. I have tried to change the tv speakers to external speakers but all is silent when i do that. I have read on the other post of similiar problems and the solution seemed to be using an optical digital cable. I have also read on prior post that i should be able to accomplish this with just the HDMI cable. I do not have a cable box only a cable line coming into the house and straight to the tv. Do i even need the rca cables?

When i purchased the equipment from best buy i told them what all i was trying to accomplish and this is the exact way i was told to make the connections keep in mind i know nothing when it comes to electronics so i wrote the instructions from the salesrep word for word. Here is what I have. My tv is located on one side of the room and receiver and blu-ray on the other about 25' from each other. I have regular cable coming to the tv and I have an HDMI cable coming from HDMI (DVI- IN) on the tv to HDMI(OUT) on my RX-V367 receiver. the i have a short HDMI cable going from my receiver (HDMI/DVD) to my blu-ray (HDMI out). My RCA cables came into play when I told the rep. that I wanted my tv sound to come through my surround sound. He said they did not have a digital optical cable with a length of 25' to reach from tv to receiver so I would have to use RCA cables and to connect them from (audio component IN) on my tv to (AV OUT) on my tv. The input on my receiver when watching tv in on HDMI 1.

Guide : Getting 5.1 surround sound. Audigy 2

Hi all
I thought I would write up a really quick but effecti've and simple guide for owners of the Audigy2 ZS and seeing how its Xmas time, I can assume a few lucky boys and girls may have this awesome card under the tree.
Most of whats covered should work with all creative products.
(Sorry, but I WILL NOT cover any info regarding encoding media or the like that will conflict with copyright laws)
This guide is for setting up your Creative Audigy 2 ZS for surround sound 5. reproduction and information in regards to required Filters/Codecs. I have not included any advanced set up options or the like as the ZS with the set ups I have incluced here will cover it out of the box.
One of the most common issues people may have with 5. not fuctioning correctly while playing a DVD movie ( Mpeg ) or any multi channel media that is 5. encoded, has to do with Codecs/Filters.
Most media players will not decode all AC3filters/Mpeg, thus require extra filters/codecs/plugins to be installed.
Ok , the first thing to do is ensure your sound card and speakers are set up correctly.
Most common speaker sets have 3 plugs that go in the back of your card .
EG, Logitech X-530. Pink = Front Centre.Black = Rear left and right. Green = Front left and right.
Ensure they are in the correct place and are tightly fitted.Ensure your sound card is secure and tightly in place.Make sure your speaker cables are tidy and not a big tangled mess.
Ensure in device audio controls that SPDIF passthrough is NOT ticked as this is for optical output ( the ZS pro with rack fuction )
Update to the latest drivers an media source ap
ps.
A few little things to set up first in Creative Mixer Control Panel to ensure cleaner sound:
Lower Master and Wav volume in Creative mixer to about 90% as to avoid any over dri've disstortion.Lower Master Bass Volume to about 90% to avoid over powering the bass.Ensure that your speaker settings Windows control panel and Creative speaker settings match your speaker set up..
Also run the THX Speaker Callibration test in basic mode.
YOU SHOULD DISSABLE CMSS IN EAX CP IN ORDER TO GET 5. TO FUCTION AS IT SHOULD.
CMSS is to be use only for a MONO or STEREO source/signal. It is for sending the stereo/mono signal ( left and right) to all speakers. This is not 5., mearly it is the same signal sent to all speakers to give you a more rich and vivid sound reproduction of an other wise flat source.
Turn off any EAX FX.
Things you want to do to ensure stable use:
SHUT DOWN CTHELPER:
A background task that is a plug-in manager for Creative drivers. A 3rd party manufacturer can use the CTHELPER plug-in interface to produce drivers, add-on features, and fixes that will integrate with a tighter fit with Creative?s sound drivers and utilities. Gi'ven its purpose CTHELPER would normally be classified as a "leave alone" background task. It also allows Creative speaker setup to be synchronized with Windows Control Panel speaker setting. Without it running that check box in Creative speaker setting is not functional (settings are not in sync). Unfortunately there are often problems with CTHELPER, most notably that it can use 00% of CPU time so it's best left disabled unless you REALLY need it .
Type in run "msconfig" and shut down all Creative Start up entries. Infact its proberly best to shut everything down.
NOTE: Any essentinal Software for the proper fuction of devices ,Eg: Razer mouse utils should be left on.
Simple Bios settings to help improve audio and stablity:
Dissable Pallette Snoop.ANY AND ALL shadows for devices, EG VGA BIOS and system bios should be dissabled. If you have the setting for PCI latency in your bios ( AGP boards only ) set it to 64, if its already at 64 try 32 .
Shut down ( remove, reconmended ) any 3rd party tweak apps that run in the background.
EG, Cache Man and any monitoring software.
Ok, now for Filters/Codecs and Plugins.
A major required Filter is AC3. (ac3filter__0a_rc5)
AC3Filter - it is DirectShow filter for AC3 decoding to play AVI with AC3 audio tracks and MPEG2 (DVD). Required for WMP.
NOTE: If you have DVD software that should play encoded 5. then make sure you have any updates/patches for the player installed and go through the tools/options for the player and ensure its setup correctly to decode AC3filters in the applictions tools menu.
If you use Cyberlink Power DVD you may need to pay an extra fee to get the required AC3filter/MPEG2 decoders to fuction as all 5. sound settings may be greyed out on some dated versions.
InterVideo WIN DVD ( this software suit comes with most "Asus" if not all makes of Mainboards. This suit comes complete with the required codecs/filters so get full surrport for 5. - 6. - 7. out of the box. Note: you must set it up first under audio options as it defualts to 2..
If you use WMP0 you should download and install the AC3filter or get the latest XP codec/filters packs. With out these filters you may not get 5. sound and/or poor reproduction.
Supported file types:
The following table lists the file types (formats) supported by Windows Media Player .(For files type played by Power DVD or WIN DVD please refer to the makers website or read me file for a detailed list).
File type (format) File name extension .
Music CD Playback (CD audio) .cda Audio Interchange File Format (AIFF) .aif, .aifc, and .aiff Windows Media audio and video files .asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx Windows audio and video files .avi and .wav Windows Media Player skins .wmz Moving Picture Experts Group (MPEG) .mpeg, .mpg, .mv, .mp2, .mpa, .mpe, .mp2v*, and .mpv2 Musical Instrument Digital Interface (MIDI) .mid, .midi, and .rmi AU (UNIX) .au and .snd MP3 .mp3 and .m3u DVD video .vob Macromedia Flash .swf Microsoft Recorded TV Show .dvr-ms*
NOTE: WMP defualts to 2.. To enable 5. run WMP0. Click on tools then point to options. Navigate to DVD then open up the advanced window. In here is everything you need to set things up.
NOTE: If you mess things up simply return to defult settings and start over.
Some common errors you may encounter with WMP.
Error messages are identified by numerical IDs, such as C00D0BC2 and 800704CF. You can determine the ID of a specific error message by clicking the More Information or Web Help button on the error message when you encounter it. The resulting page will indicate the error ID.
: Error's C00D6A and C00D9A while playing DVD's or MPEG-2 content.
This is directly related to either your current video card drivers or the MPEG-2/DVD decoder you have installed (EG: PowerDVD, Win DVD etc ). Reinstalling and/or uninstalling the MPEG-2/DVD decoder (PowerDVD, Win DVD ) and/or video drivers should fix the problem for you.
You should now be able to re-install you decoder ( Power DVD etc ) and continue its use.
Erro : C00DAC:
Cannot play the file Windows Media Player cannot play the protected file because there is a problem with your sound device, such as a sound card or sound controller. You might encounter this error message for one of the following reasons.
Your sound device requires an updated driver. ( update driver )
The selected sound device does not support Secure Audio Path (SAP).
If you have multiple sound devices installed on your computer, try using a different one.
To use a different sound device, on the Tools menu, click Options, and then click the Devices tab. Double-click Speakers, audio device to use, click a different device.
Error : "divide error in module IVIAUDIO.AX at".
Only exists in systems that have various Sound Blaster Li've sound cards and WinDVD installed.
This is infact a compatibility problem between these products. The problem is realized when MP3 oriented applications call upon certain sound card services making it look as though the error was raised from within the application in question.
FIX:Uninstall WIN DVD. Reinstall WMP and AC3 filter and then reinstall DVD WIN.
A simple but rare issue.
ModName.Win DVD "msvcrt.dll" and/or Win DVD MFC application error.
FIX:
Uninstall any java filters. Macromedia and Macromedia Acti'veX.
( to remove Acti'veX go to C:\WINDOWS\Downloaded Program Files and delete the Acti'veX )
What are codecs Codecs/Filters.
Codec stands for Coder/Decoder. Basically it is a piece of software or a driver that adds a support for certain video/audio format for your operating system. With codec, your system recognizes the format the codec is built for and allows you to play the audio/video file (=decode) or in some cases, to change another audio/video file into that format (=(en)code).
For example, when you install Windows to your home computer, Windows installs automatically most commonly used codecs into the system, so you don't have to download them separately from their vendors. However there are some codecs that are widely used, but not installed by Windows. Most notably DivX , MPEG-2.
Get all the Codecs/Filters/Plugins you could ever need from:
http://www.free-codecs.com/AC3_Filter_download.htm (ac3filter__0a_rc5)
http://www.free-codecs.com/
NOTE: ( XviD-.0.3-2022004 for Divx ) Stand alone codec for playing Divx instead of the Divx full install.
http://www.microsoft.com/windows/win...0/default.aspx
Ok, you now should be all set.
However Codecs/Filters/Plugins are like any other kind of software installed and things can go wrong. If things are not working as they should try the following.
Download and install "Gspot"
http://gspot.headbands.com/download.htmlBuild 0307 - 23 KB Run the programme and simply point to system and select "List Codecs and other Filters"
Its a no brainer really to know whats what here and how to use it to find out the source of the issue, if you have one. If its red, its bad so you then need to trace the Filter/Codec to its source and remove it.
Here is just one very simple excample you may encounter and how it was fixed.
If you have ffdshow file is missing error pop up while running a player application, first go to C:\WINDOWS\system32 and search for ffdshow.en. Its proberly not here though. If it is just leave it be.
NOTE: ffdshow is used for AVI/Xvid enc/dec source.
To fix this "ffdshow Video Codec file is missing " error Simply uninstall your Xvid codec or your entire DivX programme, or any other Filter/Codec you have installed for playback of DivX files and AVI Video Files.
(Some times it seems a few Codecs/Filters dont get along so you must be aware of what you install).
Cheak "Gspot" again and Filter should be removed from the list.
Now you can reinstall the Xvid filter "XviD-.0.3-2022004" or your desired DivX programme.
Now go back toC:\WINDOWS\system32 and search for ffdshow.en. It should be there if it was not before. If the issue is back try a different version of required Filter.
So, thats just excample of a simple fix that got everything working again. Its not to hard to find out what the problem Codec/Filter is and then its just a case of uninstalling it. You can re-install the Codec/Filter but you should double cheak with "Gspot" and ensure the issue has not repeated itself .
If it has you can try and find out if the issue is related to another type filter causing a conflict or use an alternate Filter/Codec that will perform the same task .
Search for an updated version of required the Codec/Filter also.
Ok, thats pretty much the basics in getting correct and stable 5. sound working the way it should with your new Creative Audigy 2 ZS sound card.
I hope this has been of help.
Regards,xmn.
Message Edited by xmn on 2-24-2005 08:02 PM
Message Edited by xmn on 2-24-2005 08:04 PM
Message Edited by xmn on 2-24-2005 08:05 PM
Message Edited by xmn on 2-24-2005 08:05 PM
Message Edited by xmn on 2-24-2005 08:09 PM
Message Edited by xmn on 2-24-2005 09:29 PM
Message Edited by xmn on 2-26-2005 03:07 PM

BUMP, just incase its been missed by a new board member

How do I connect my Apple TV to my Philips surround sound DVD system?

I can't seem to get surround sound when watching Apple TV (or when watching live or recorded TV via my Virgin Tivo). I use a three-years old Philips DVD home surround system to get surround sound when I'm watching Blu-Ray (I have connected my Philips Blu-ray and my Philips DVD player without difficulty). But I can't figure out how to get surround sound whne watching Apple TV. I bought an optical cable with an audio jack on one end, to connect to the DVD player and the optical end clicks into the ATV. Still nothing. Any ideas?

The surround system seems to support digital audio - it has settings for HDMI audio and video (even though it doesn't actually have an HDMI port) I bought the optical/audio cable on the advice of a staff member in the Apple Store, but frankly, she didn't see, to understand my problem. She recommended I insert the cable into the "MP3 cable IN" port but that' not working.
I'm probably not explaining myself very well - bottom line: I have a DVD surround system and an Apple TV, so how do I connect them?

How can I connect my apple TV to my surround sound system without running any extra cables?

I have my Apple TV connected to my TV via HDMI. The TV is connected to an auxiliary box that outputs sound to house speakers. I don't want to run any additional wires because of the distance to my auxiliary box and the fact all my wires now run through the wall. Also the auxiliary box lacks any extra HDMI ports.
On cable, the TV sound plays surround sound, but on the Apple TV sound plays from the TV itself.
Is there any way to alter settings on the TV (LG LB6100 Smart TV) to change the sound source?

if you have a router and set it up for wifi and have ethernet plugged in then point your iPhone to that router and it will connect to the ATV.

HT1454 i connect my iPad to my tv with hdmi cable but the surround sound from the receiver is not working why is this?

i want to play my ipad on through my tv and receiver to get surround sound (not using the tv speakers) I connect the htmi cable to my tv and ipad do i need more cable to get my surround sound to play the audio? i thought hdmi did it all.

if you have a 6th or 7th gen classic, you'll have a have the video out cable from apple. only the 5th gen will play with a generic 3 connector video out cable.

5.1 surround sound adaptor?

Similar Messages

Maybe you are looking for