5.1 Upgrade and Battrey Life

The 5.1 upgrade resulted in reduced battery life in my 4S and my iPad. However, the worst hit was to my phone. I was happy with the original performance an that has now been cut by at least 25%. Is there a new fix on the way or something I can do to help return my iPhone Bach to its 5.0 performance level?

I am experiencing the exact same concern. I do not feel I am a heavy user of my iphone on any given work day... before upgrading to 5.1 my iphone 4s had great battery life. My iphone easily lasted from 6am wakeup and news reading, through a 10 hour work day of occasion email, facebook and text activity, and beyond into the evening with reasonable web use and a bedtime around 10 pm.
I now find that after I check my email and news in the morning I notice the battery has dropped so I plug it in before I leave... only to find after my 10 hour work day I am down to warning battery levels under 20%!! And if I want to use my phone when I get home I have to charge it again. This is extremely disappointing.
I have tried turning off Wifi and location services with no marked improvement. My e-mail is the only app that I allow to push notifications.
I am very interested in a fix.

Similar Messages

Firmware Upgrade and Battery Life?

Since the firmware upgrade on my Macbook in early February the fan appears to be running at full speed all the time and battery life is crap! Has anyone else noticed this? Is there a fix/workaround available please?

Sounds more like an app stuck processing that shouldn't be....does happen from time to time. Behing hot means it is constantly processing.
To fix:
Try a reboot (described below).
Think of it this way, the iPhone is more of a computer than a phone. It suffers from being a new OS and nobody can deny there are not bugs and memory leaks. The longer left running, the more things start to fail or slow down (I have had the iPhone since day one of original phone and I am just speaking from my experience). Thus I equate it to like when Windows95 came out...not sure of your age or if you remember those days...but back then it was a running joke of how many days you can keep Windows 95 running before you had to reboot. I am sorry to say but the iPhone is the same way right now (but getting better with a few hiccups back during the 2.0 release). So for me, I reboot daily when I leave in the morning and take it off the charger. By doing so I rarely see any lag or problems.
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
You may also wish to read this tread about reboots and odd application behavior.
http://discussions.apple.com/message.jspa?messageID=5851978#5851978
For me, 2.1 works great.

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

Updated to OS 10.7.3; fan runs constantly and battery life dropped to under 2 hours when 100% charged. How do I get back to 10.7.2, I don't have a backup prior to this upgrade. This is a newer Macbook Pro 13", no modifications.

Help! This new version of Lion is making me miserable. The fan runs constantly, the computer is hot and battery life has dropped to under 2 hours on a fully charged battery. I updated yesterday, nothing but misery today. Even running the mail program alone make the fan run like I have everything open. Using Pages, iPhoto, and iTunes simultaneously makes the computer blistering hot.Yesterday, I could use all three without any trouble. Any suggestions to either jettison 10.7.3 or how to fix without any expense? I haven't modified this computer at all, it is as it came from the box in August 2011: 2.3 GHz Intel Core i5, 4GB 1333 Mhz DDR3.

I updated to Lion 10.7.3 and started noticing my fans running on high all the time and my battery would drain 2-3x faster. I was going to take my computer into an Apple store until I found this thread. I did the SMC reset by shutting down my computer, plugging it in, and then pushing down shift+control+option while also pushing down the power button. Nothing happens on the screen and the computer did not turn on. I then released all the buttons at once after holding them down for 10 seconds.
After that, I simply turned my computer back on and everything seems to be working fine. The fans are not blasting anymore. I have a newer MacBook Pro where I can't access my batteries. The SMC reset may differ for other types of laptops.

Help with simple OS upgrade and backup questions for a dumb old previous PC user...?

Ok...have mercy on me, please...
I am not completely dumb, I know typical board etiquette, and I have searched for various answers (and found many)...but I just want to confirm my personal "research" and get all of this clear up before I proceed with this insanity. I know I could probably search more, but this is taking hours, because of all my various questions, one leads to 10 more...
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
My main goal: install an app that was in the Mac App store.
However, with Leopard, I can't access the Mac App store with Leopard, apparently.
I click on the Mac App store, and up pops up a Lion advertisement...telling me I should upgrade. Ok, fine...probably a good idea, anyway...
But how do you upgrade to Lion? Apparently through the Mac App store!
The web-redirects on the Apple site are amusing...taking me on an endless cycle...purchase Lion in the app store...click..."you need to upgrade to Lion"...OK...click..."you need Lion at the app store"...OK...click..."you need to upgrade to Lion to get to the app store"....etc.
OK...fine...google searches...ahh, I need to upgrade to Snow Leopard first, apparently! Yes?
(Maybe the Apple redirects should detect that I have Leopard, and direct me to a screen that explains that I must upgrade to Snow Leopard...and then Lion! Do you hear that, Apple? Thanks.)
Anyway...so here's my plan:
1) Upgrade to Snow Leopard
2) Access the Mac app store
3) Upgrade to Lion
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes? Is this a dumb idea, even if "OK"? I know that "minimum requirements" on a PC often meant: "Well, it will work...but it will be slower than a snail and crash if you run 5 programs at the same time" (which I usually do...) I don't want to upgrade if the "minimum" is really not enough.
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
= = =
Next:
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Anyway...so, my iMac has Time Machine. I am pretty ignorant about this, and based on my previous PC backup program nightmares, I have a distrust for it...and don't really understand how it works. But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C...
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files. My wife and I both access the computer, so two user accounts. Does Time Machine really do a good job backing up everything and all things? Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine? Anything for me to "watch out for"...or to do when I buy a new external hard-drive and setup up Time Machine for the first time on it, in order to make this work well? Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
Thanks for any sincere help.

yachadhoo wrote:
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
Apple has discontinued support for 10.5, it's a plaque of our platform that Apple only supports the last two operating systems in circulation.
Where as on Windows you can run the same OS version for 10 years and get updates free (if not stolen), on a Mac we get one year, two tops now and if you don't upgrade and break all your third party software and hardware drivers in the process, then your denied security updates.
On top of that, the OS X upgrades tend to break your older hardware too, or slow it down so much that it drives you to want to buy newer hardware.
It's funny Apple places the AppStore on your OS X version along with iTunes and Safari updates, but then doens't supply necessary security updates, your machine may be compromised and here you enter vital credit card info, banking etc. thinking you have a secure machine.
My advice, since that's a 10.5 era Mac, is to upgrade to 10.6.3 via this disk, then use Software Update until clear. You'll get security updates and your present installed 10.5 software will work in 10.6 using Rosetta.
http://store.apple.com/us/product/MC573Z/A
Rosetta is not avaialble in 10.7 so it could be a lot of your software will no longer function
http://roaringapps.com/apps:table
I don't see the sense in you buying all new software for a machine that's at it's end of life stage.
You can buy software in the AppStore with 10.6.
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes?
You will need to buy 4GB of RAM to run Lion well, the 2GB is just a bare minimum, and your processor is a bit dated.
Lion 10.7 is certainly slower than Snow Leopard 10.6, in fact so many wanted to go back to Snow Leopard and one of the resons was Lion was slow.
So I wrote a User Tip, here, but the Tips were implemented only recently.
How to revert your Mac to Snow Leopard
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
RAM is easy, you can buy it at Otherworld Computing or Crucial.com and install it yourself, there is a little door under the monitor.
Videos online at YouTube.
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Mac'soperaing system is seperate, it can be replaced or upgraded indepentantly of programs or user accounts on the machine.
There are some programs that install a kernel extension file at boot into OS X, those get knocked out, but those can be replaced with a new install of the software.
You should always backup your users files as those can't be repalced.
 Most commonly used backup methods explained
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files.
OS X upgrades dont' affect User accounts but they can have a affect on programs installed, which most of your 10.5 programs likely will no longer work in 10.7
However they will (with a slight update) work in 10.6 just like before.
You need to backup regardless, I suggest a manual backup of users files to a storage drive, a 10.5 clone on another drive, the your ready to upgrade to 10.6
10.5 to 10.6 upgrade is rather painless, also 10.6 gives accelerated video drivers, so your machine will appear faster.
However once you install 10.7, you will slow down.
Does Time Machine really do a good job backing up everything and all things?
No, you shouldn't rely upon TM, have a multiple backup stragedy, TM files are hard to access directly.
Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine?
No need to restore, OS X upgrades and leaves everything else in place, just some programs (with 10.6) or a lot (with 10.7) when you try to launch them they will fail.
Also when you connect TM it will do a substancial change to reflect the new boot drive.
If you were using TM as a "storage drive" thinking you can use the archived versions later, that wil change upon the new OS X upgrade.
But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C..
You need not only TM drive, but a bootable clone and user files on a storage drive.
 Most commonly used backup methods explained
Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
No, depending upon what OS X version you stop at depends how many programs no longer work.
You will have to buy a lot of new or upgrade versions with 10.7, not so with 10.6 only updates mostly because of Rosetta on 10.6 and not on 10.7
My opinion, since that machine is a bit dated, is to upgrade to 10.6, Software update to 10.6.8, and stay there.
Later on 10.8 is being released after this summer, you may want to consider getting a new machine with 10.8 a few months later to ensure all the bugs are worked out of it.
Your not a comptuer savvy person, you like most Apple users expect your machine to "just work" I think going to 10.7 will be a bad experience for you.
10.6.8 will server your needs until 10.8 is released and on new hardware where Apple will hold your hand for free for three months, 3 years with AppleCare.
Your not a "OS X upgrader type of a person" and Apple needs to get of thier collective assets and pay better attention to it's most common users.

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

Cant stand the changes to my Maxx HD with the KitKat upgrade, text colors and keyboard terrible. How can I remove the upgrade and go back to what I had?

How can I remove this new Kitkat upgrade and go back to what I had. I cannot deal with the color on text screen and the keyboard is terrible. Can take back all the stupid pictures they added for texting. Just need it back to what it was.

Hasn't any business ever heard of the term.
IF IT AINT BROKE DON'T FIX IT.

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie

The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade.

What is difference between Startup upgrade and startup migration.

what is difference between Startup upgrade and startup migration.

I am having the metalink note.
STARTUP MIGRATE was introduced in 9.2 as a mechanism to be sure that most everything that needs to be done to run an upgrade script or a patch script is done automatically. In the past, customers were expected to adjust certain initialization parameters prior to beginning an upgrade or applying a a patch,
but most of this is now done automatically by STARTUP MIGRATE.
When a customer starts a database in MIGRATE mode, the following ALTER SYSTEM
commands will be set automatically:
But i am not sure what exactly the meaning by startup upgrade.
and exactly the startup upgrade and startup migrate

HT1473 Could you remind me how to synch music backl from my ipod to my compputer - my ipod has my whole collection but my laptop has been upgraded and i lost my library

Could you remind me how to synch music back from my ipod to my computer - my ipod has my whole collection but my laptop has been upgraded and i lost my library

Follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Someone help me I still have iPhone 3 and I can't download anything like my slotmania it let me download later version but keeps asking for me to upgrade and trying to figure out why it keeps doing that when I have already got downloaded but won't let me

Someone please help me I have an iPhone 3GS version 4.2.1 8c148a and I downloaded slotmania this morning and it won't let me play it keeps asking if I want to upgrade and I can't upgrade because phone won't let me so I'm wanting to play my game I use to could play it and farmville but for some reason it won't let me play .... Can someone help me figure out something because I'm sure their is a way I can and husband won't upgrade me and I got free upgrade and can't even get because he's cheap it's sad Hugh

What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps.

Depriciation key and useful life periods in asset master should in display mode only

Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.

Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek

Memory Upgrade and How do I add Bluetooth to S10-3

Hi,
Newbie here, just got my S10-3 last week and love it. I have upgrade to Windows 7 Pro and would like to increase the memory and add internal Bluetooth if possible. What type of memory card do I need to go to 2M? Lowest cost and brand/model number would be great information if you can provide it. Do you think it's possible to add Bluetooth internally? I know I can add using USB external, but would really like to keep it internal and keep all three USB ports free for other devices.
Thanks Much!!!
Solved!
Go to Solution.

Re: Memory Upgrade and How do I add Bluetooth to S10-3[ New ]
04-05-2010 06:54 PM
Hi ssedqwick you solved Bluetooth?
Thx
EMERSON VIER
No, I have not. I think there is a connector for USB in the motherboard, but don't know for sure. Someone that works on the S10-3 will know the answer, so just have to wait and see if that person shows up.

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

5.1 Upgrade and Battrey Life

Similar Messages

Maybe you are looking for