5.2 Patch 2 Post-Install Error
Jay,
I am installing patch 2 for IMS 5.2 today and got the following
errors during the Post-install: (imsimta test -rewrite -debug postmaster)
(can you take a look and comment ?) maybe this is because LDAP (directory server) was not running?
I changed the company domain in the output below:
5.2p2 has been installed successfully.
Running Post-install procedures.
/var/iplanet/ims52/msg-mailsvr2/imsimta chbuild
/var/iplanet/ims52/msg-mailsvr2/imsimta cnbuild
[05/Jan/2005:11:13:10 -0600] mailsvr2 [3422]: General Warning: could not get server configuration in ldap, using cached configuration information
/var/iplanet/ims52/msg-mailsvr2/imsimta cleandb
/var/iplanet/ims52/msg-mailsvr2/imsimta counters -delete
11:13:11.79: Exit code = 0 (2) - IMTA__NO, basic NO, log_delete_sections error
/var/iplanet/ims52/msg-mailsvr2/imsimta version
SunOS mailsvr2 5.8 Generic_117350-10 sun4u sparc SUNW,Ultra-60
iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)
libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)
/var/iplanet/ims52/msg-mailsvr2/imsimta test -rewrite -debug postmaster
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
11:13:12.33: mmc_winit('l','[email protected]','[email protected]') called.
11:13:12.33: Queue area size 48882178, temp area size 48882178
11:13:12.33: 12220544 blocks of effective free queue space available; setting disk limit accordingly.
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2.xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not forward.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2", domain = "mailsvr2.xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "mailsvr2.xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "mailsvr2.xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2.xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not forward.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2", domain = "mailsvr2.xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "mailsvr2.xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "mailsvr2.xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Mapped return address: [email protected]
*** Debug output from rewriting a forward header address:
11:13:12.33: Rewriting: Mbox = "postmaster", host = "xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not envelope.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "xyz-company", domain = "xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Rewrite rules result: [email protected]
11:13:12.33: Checking reverse URL cache for: [email protected]
11:13:12.33: Applying reverse URL pattern ldap:///$V?mail?sub?$Q to: [email protected]
11:13:12.34: URL generation failed, status = 0
forward channel =
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = (route (reprocess-daemon-error,reprocess-daemon-error)) (host xyz-company.com)
envelope From: address = [email protected]
name =
mbox = postmaster
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
-13 expansion total.
*** Debug output from submitting an envelope address:
11:13:12.34: mmc_wadr(0x00060450,'postmaster','postmaster') called.
11:13:12.34: Copy estimate before address addition is 1
11:13:12.34: Parsing address postmaster
11:13:12.34: Rewriting: Mbox = "postmaster", host = "xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.34: Rewrite: "$*", position 0, hash table -
11:13:12.34: Found: "$E$F$U%[email protected]"
11:13:12.34: Match, pattern = "xyz-company.com", current = "(*domaincheck*)"
11:13:12.34: old state = not checked.
11:13:12.34: Performing domainMap check on xyz-company.com.
11:13:12.34: domain check failed with temporary error 91.
11:13:12.34: Temporary lookup failure, using fallback rewrite reprocess-daemon$Mtcp_local$1M$1~-error$4000000?Temporary lookup failure
11:13:12.34: Match, pattern = "tcp_local", current = "l"
11:13:12.34: old state = succeeded.
11:13:12.34: new state = succeeded.
11:13:12.34: New mailbox: "postmaster".
11:13:12.34: New host: "xyz-company.com".
11:13:12.34: New route: "reprocess-daemon-error".
11:13:12.34: New channel system: "reprocess-daemon-error".
11:13:12.34: New error message: "Temporary lookup failure".
11:13:12.34: Looking up host "reprocess-daemon-error".
11:13:12.34: - Not found
11:13:12.34: Copy estimate after address addition is 1
Submitted address list:
Address list error -- 4.0.0 Temporary lookup failure: postmaster
Submitted notifications list:
Checking installed version string.
New Installed Version is 5.2 Patch 2
Please consult the README.txt file for post-installation instructions.
#
Yes. "All iMS services" means running stop-msg, and making sure all processes that started from that are done. Specifically:
tcp_smtp_server
tcp_smtp_client
ims-master
imapd
popd
mshttpd
dispatcher
job_controller
things not included:
slapd
admin-serv
web servers
etc.
Similar Messages
-
Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux
Hi All,
Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux
Thanks in advance.set hostnme correctly
-
8,1,1 post-install error message
Upon launching a document post-8.1.1 install, the following error message titled "AcroRd32.exe Application error" pops up:
The instruction at "0x2d830cbc" referenced memory at "0x00000008". The memory could not be "read".
What's my issue? HW? OS?Refer to Release Notes for 8.1.6, there are good instructions about JRE related installation problems.
-
Java AS 700 post install error
I am getting an error after install of the java AS 700 when I am trying to run the JSPM. It's telling me it cannot locate the DBINFO.XML file.
I'm sure I've missed a step somewhere but I cant find any note or anything with DBINFO.XML in it.
The SDM, http etc are all running fine.
TIA,
MSOLUTION:
Turns out that my %JAVA_HOME% variable was point to the JRE from the initial install. I never changed it to the JDK path.
I discovered this because the logs were telling me that that it didnt support the cp850 bin2. A quick search on that turned up a note explaining that this variable was pointing in the wrong place.
M. -
Problem with the EP6 SP10 Patch 1 Post Install (VERY URGENT)
Hello,
My installation seems to be well done.
But when I try to do the first connection on the portal, I sign-in the system and it returns errors like :
"Portal Runtime error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage
Component Name : com.sap.portal.pagebuilder.pageBuilder
The exception was logged. Inform your system administrator..
Exception id: 04:29_01/02/05_0003_7226250
See the details for the exception ID in the log file"
Is there one of you who can help me to solve my problem.
It is very urgent
Thanks in advance
Regards
HumbertHello,
The console logs contain no information bout my problem but I looked in the directory :
e:\usr\sap\DP1\DVEBMGS00\work and here is the contain of the file std_server0.out
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_63] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_53] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_50] Fatal:
Feb 2, 2005 11:03:30 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_30] Fatal:
stdout/stderr redirect
node name : server0
pid : 1820
system name : DP1
system nr. : 00
started at : Wed Feb 02 11:03:37 2005
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40 PatchLevel 88028.313 is starting...
Loading: LogManager ... 609 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 94 ms.
Loading: ThreadManager ... 15 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 15 ms.
Loading: ClusterManager ... 250 ms.
Loading: LockingManager ... 63 ms.
Loading: ConfigurationManager ... 1031 ms.
Loading: LicensingManager ... 31 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (78 ms).
Service cross started. (125 ms).
Service file started. (125 ms).
Service timeout started. (125 ms).
Service memory started. (156 ms).
Service jmx_notification started. (203 ms).
Service trex.service started. (266 ms).
Service userstore started. (31 ms).
Service tcsecvsi~service started. (297 ms).
Service p4 started. (343 ms).
Service classpath_resolver started. (16 ms).
Service tcsecwssec~service started. (390 ms).
Service deploy started. (2656 ms).
Service apptracing started. (172 ms).
Service log_configurator started. (8031 ms).
Service locking started. (0 ms).
Service http started. (172 ms).
Service naming started. (297 ms).
Service failover started. (62 ms).
Service ts started. (109 ms).
Service appclient started. (140 ms).
Service javamail started. (156 ms).
Service licensing started. (16 ms).
Service jmsconnector started. (172 ms).
Service connector started. (234 ms).
Service configuration started. (16 ms).
Service webservices started. (578 ms).
Service dbpool started. (5343 ms).
Service com.sap.security.core.ume.service started. (2547 ms).
Service security started. (2203 ms).
Service classload started. (109 ms).
Service applocking started. (156 ms).
Service shell started. (344 ms).
Service tceCATTPingservice started. (47 ms).
Service telnet started. (78 ms).
Service keystore started. (516 ms).
Service ssl started. (16 ms).
Service webdynpro started. (172 ms).
Service tcsecsecurestorage~service started. (109 ms).
Service ejb started. (781 ms).
Service servlet_jsp started. (813 ms).
Service dsr started. (343 ms).
Service tcsecdestinations~service started. (141 ms).
Service rfcengine started. (109 ms).
Service jmx started. (829 ms).
Service pmi started. (203 ms).
Service prtbridge started. (688 ms).
Service basicadmin started. (703 ms).
Service adminadapter started. (93 ms).
Service sld started. (1234 ms).
Service monitor started. (672 ms).
Service com.sap.portal.prt.sapj2ee started. (109 ms).
Excluding compile: iaik.security.md.SHA::a
Service jms_provider started. (2954 ms).
service DQE ================= ERROR =================
Service tc.monitoring.logviewer started. (4266 ms).
ServiceManager started for 26532 ms.
Framework started for 28844 ms.
SAP J2EE Engine Version 6.40 PatchLevel 88028.313 is running!
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Regards
Humbert -
Errors During Post Install Check on Ubuntu 12.04
Hello Gurus,
I'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. I patched the HTTP server with 6078836 (Copied libdb.so.2 to /usr/lib).
I did the md5sum check before starting the install. I completed the kernel settings as per the note below:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Contents of /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.101 erpbeginner.dyndns.org erpbeginner
Installation went smooth till the Post install checks where it fails for the following:
HTTP
JSP
Login Page
Help Page
Virtual Directory
Contents of the log file:
command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
riwTDBup.sh started at Tue Oct 16 07:30:46 EDT 2012
Parameters passed are : /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/r12/VIS/db/tech_st/11.1.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /d01/r12/VIS/db/tech_st/11.1.0/perl/bin:/d01/r12/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:.
LD_LIBRARY_PATH : /d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/r12/VIS/db/tech_st/11.1.0/ctx/lib
Executable : /d01/r12/VIS/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 0
Database ORACLE_HOME connection test has succeeded
command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
riwTDBup.sh started at Tue Oct 16 07:30:47 EDT 2012
Parameters passed are : /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/r12/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /d01/r12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
LD_LIBRARY_PATH : /d01/r12/VIS/apps/tech_st/10.1.2/lib32:/d01/r12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/d01/r12/VIS/apps/apps_st/appl/sht/12.0.0/lib
Executable : /d01/r12/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 0
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Apps ORACLE_HOME connection test has succeeded
Configuration Upload
uploading config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
AppsConfig : 'config.txt' uploading...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : erpbeginner
sDbDomain : dyndns.org
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@erpbeginner.dyndns.org:1521:VIS
Connection obtained
-------------------ADX Database Utility Finished---------------
Successful upload of config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
Environment File
Database ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env
Apps ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.3/VIS_erpbeginner.env
iAS ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env
APPL_TOP environment file passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/VIS_erpbeginner.env
ADOVARS environment file passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/admin/adconfig.txt
DBC File
DBC file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/appl/fnd/12.0.0/secure/VIS.dbc
HTTP
checking URL = http://erpbeginner.dyndns.org:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
When I search for the library "libclntsh", I found 3 matches to libclntsh.so.11.1,libclntsh.so.10.1 and libclntsh.so.
Only libclntsh.so.11.1 is a file and rest are symbolic links to this file which seem to be broken.
So I tried to redo the symbolic links and did a retry for the post install checks which failed again.
Can somebody please shed some light on this?
Best Regards,
RichieI'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. Please note that this OS is not certified.
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directoryPlease see the suggested solution in (Installing R12.0.4 Ebuisines Suite Autoconfig Fails With: sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory [ID 579254.1]). Also, please make sure you have all RPMs installed as per (Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (64-bit) [ID 416305.1]) and follow all post installation steps.
Thanks,
Hussein -
Hi,
I have two Windows ACS's which I need to replicate between each other - this happened in the past (when both at the same lower patch level) , but the original Primary one of the pair one has had to be down graded to it's original level due to install errors. Both are now independant ACS's
To sort out the lack of replication we need to patch the planned PR box from 4.2 (0) Build 124 to the same level as the planned DR which is at 4.2 (1) Build 15 Patch 4.
We've tried installing Patch ACS-4.2.0.124-9-SW on the 4.2 (0) Build 124 as we were informed (some time ago) that it is required before running the ACS-4.2.1.15.4-SW.exe patch.
The patch installed, but when we ran CSUpdate as per the instructions in Acs-4_2_0_124_9-SW-Readme.txt , we tried both the -install option and the -upgrade switch and got a [1] [169]:SL:loadHosts - execution failed Can not load HostDB error. (See screen shot)
After this the ACS services (in Windows Services ) wouldn't start, even after a server reboot.
Should we leave this patch 9 and install cumlative patch 17 instead and then run ACS-4.2.1.15.4-SW.exe patch ?
The read me notes for cumlative patch 4.2.1.15.4.17 looks like it might require Patch 9 as it only lists bug fixes from Patch 10 upwords (although it mentions a refix for 9 right at the bottom of the page).
ThanksYou may upgrade directly to patch 17, this one doesn't ask to apply csupdate.exe before the cumulative patch.
~BR
Jatin Katyal
**Do rate helpful posts** -
MS VS 2008 post install step; Oracle patch 9491976 failed while relinking
Hi,
I am installaing R12.1 on Windows 2008 Enterprise (SP1) server with Microsoft Visual Studio 2008 and cygwin as pre requisite softwares. The installation has got completed and I was even able to run a test concurrent program successfully.
Now, as part of post installation step (MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]) applied the patch 9491976 and it error's out with relinking error.
All the relinking of the executables has failed in that patch and below is the gist of one such error message,
The error in the adrelink.log is as follows,
D:/oracle/VIS/apps/tech_st/10.1.2/lib/oracore10.lib C:/VS2008/VC
/LIB/MSVCRT.LIB C:/VS2008/VC /LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB
"LIB"/USER32.LIB "LIB"/ADVAPI32.LIB "LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB
"LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'C:/VS2008/VC.obj'
gnumake: *** [D:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin/FNDCORE.dll]
Error 157
Done with link of fnd executable 'FNDCORE.dll' on Mon Nov 22 14:58:53 PST 2010
Relink of module "FNDCORE.dll" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'fnd' on Mon Nov 22 14:58:54 PST 2010
adrelink is exiting with status 1
There are not spaces in the directory were MS VS 2008 is installed and the variable is set to "Set MSVCPP=C:/VS2008/VC"
Please review and advice if anyone had faced this issue.
Thanks,
RajeshHussein,
Please find below the requested information,
1. Path variable value after sourcing the apps env file,
D:\oracle\VIS\apps\apps_st\appl>APPSVIS_oracletemp.cmd
ECHO is off.
ECHO is off.
Tue 11/23/2010 02:36 PM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
APPSORA.cmd exiting with status 0
D:\oracle\VIS\apps\apps_st\appl>
D:\oracle\VIS\apps\apps_st\appl>echo %path%
C:\VS2008\Common7\IDE;C:\VS2008\VC\BIN;C:\VS2008\Common7\Tools;C:\Windows\Micros
oft.NET\Framework\v3.5;C:\Windows\Microsoft.NET\Framework\v2.0.50727;C:\VS2008\V
C\VCPackages;C:\Program Files\\Microsoft SDKs\Windows\v6.0A\bin;D:\oracle\VIS\ap
ps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\
oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\app
sutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-m
ulti-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;D:\oracle\VIS\apps
\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle
\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\apps
util\jdk\jre\bin;C:\cygwin\bin;C:\Windows;C:\Windows\system32;D:\oracle\VIS\apps
\tech_st\10.1.3\ant\bin
D:\oracle\VIS\apps\apps_st\appl>
2. gnumake version is as follows,
D:\oracle\VIS\apps\apps_st\appl>gnumake --version
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i386-pc-mingw32
D:\oracle\VIS\apps\apps_st\appl>
Thanks,
Rajesh. -
April CPU 2013 post.bat error for windows based install
Hi,
Can anybody please suggest how to resolve this problem or can this be ignored ? The post-script processing says " BEGIN failed--compilation aborted at ..." some perl files but when we proceed with prompt 'y' the patch is getting installed properly. The "lsinventory also indicates that the new patch is installed properly. So far I don't see this kind of issue in "known issues" list of readme.html.
Any help would be very much appreciated.
This is windows 2008 R2 x64 bit install with 11.2.0.3 standard edition database.
The patch is April CPU 2013 p16345834_112030_MSWIN-x86-64\16345834
ERROR is:
[Apr 23, 2013 10:32:17 AM] Execution of 'cmd /C "C:\Users\admin\Desktop\oracle\p16345834_112030_MSWIN-x86-64\16345834\custom\scripts\post.bat" -apply 16345834 ':
[Apr 23, 2013 10:32:18 AM] Return Code = 9
[Apr 23, 2013 10:32:18 AM] Execution of ' Command and arguments of pre/post scripts is restricted to be viewed in log file ':
Return Code = 9
[Apr 23, 2013 10:32:18 AM] Command invocation returned Error... 'Perl lib version (v5.6.1) doesn't match executable version (v5.10.0) at E:\Oracle\Database\vDB\OHS\perl\5.6.1\lib\MSWin32-x86/Config.pm line 21.
Compilation failed in require at E:\Oracle\Database\vDB\OHS\perl\5.6.1\lib\MSWin32-x86/DynaLoader.pm line 25.
BEGIN failed--compilation aborted at E:\Oracle\Database\vDB\OHS\perl\5.6.1\lib\MSWin32-x86/DynaLoader.pm line 25.
Compilation failed in require at E:/Oracle/Database/vDB/perl/lib/Win32.pm line 8.
BEGIN failed--compilation aborted at E:/Oracle/Database/vDB/perl/lib/Win32.pm line 82.
Compilation failed in require at E:/Oracle/Database/vDB/perl/lib/Cwd.pm line 671.
BEGIN failed--compilation aborted.
', Return Code = 9
[Apr 23, 2013 10:32:08 AM] Inventory check OK: Patch ID 16345834 is registered in Oracle Home inventory with proper meta-data.
[Apr 23, 2013 10:32:08 AM] verifying 197 copy files.
[Apr 23, 2013 10:32:17 AM] verifying 5 plugin actions.
[Apr 23, 2013 10:32:17 AM] Files check OK: Files from Patch ID 16345834 are present in Oracle Home.
[Apr 23, 2013 10:32:17 AM] --------------------- Post-script processing ---------------------
[Apr 23, 2013 10:32:17 AM] Start the Apply postScript at Tue Apr 23 10:32:17 EDT 2013
[Apr 23, 2013 10:32:17 AM] Execution of 'cmd /C "C:\Users\admin\Desktop\oracle\p16345834_112030_MSWIN-x86-64\16345834\custom\scripts\post.bat" -apply 16345834 ':
[Apr 23, 2013 10:32:18 AM] Return Code = 9
[Apr 23, 2013 10:32:18 AM] Execution of ' Command and arguments of pre/post scripts is restricted to be viewed in log file ':
Return Code = 9
[Apr 23, 2013 10:32:18 AM] Command invocation returned Error... 'Perl lib version (v5.6.1) doesn't match executable version (v5.10.0) at E:\Oracle\Database\vDB\OHS\perl\5.6.1\lib\MSWin32-x86/Config.pm line 21.
Compilation failed in require at E:\Oracle\Database\vDB\OHS\perl\5.6.1\lib\MSWin32-x86/DynaLoader.pm line 25.
BEGIN failed--compilation aborted at E:\Oracle\Database\vDB\OHS\perl\5.6.1\lib\MSWin32-x86/DynaLoader.pm line 25.
Compilation failed in require at E:/Oracle/Database/vDB/perl/lib/Win32.pm line 8.
BEGIN failed--compilation aborted at E:/Oracle/Database/vDB/perl/lib/Win32.pm line 82.
Compilation failed in require at E:/Oracle/Database/vDB/perl/lib/Cwd.pm line 671.
BEGIN failed--compilation aborted.
', Return Code = 9
[Apr 23, 2013 10:32:18 AM] Finish the Apply postScript at Tue Apr 23 10:32:18 EDT 2013
[Apr 23, 2013 10:32:18 AM] OUI-67133:Execution of POST script failed, with return value = 9
[Apr 23, 2013 10:32:18 AM] Do you want to proceed? [y|n]
[Apr 23, 2013 10:32:18 AM] Start to wait for user-input at Tue Apr 23 10:32:18 EDT 2013
[Apr 23, 2013 10:33:33 AM] Finish waiting for user-input at Tue Apr 23 10:33:33 EDT 2013
[Apr 23, 2013 10:33:33 AM] User Responded with: Y
[Apr 23, 2013 10:33:33 AM] Got online patch property as NULL for the node
[Apr 23, 2013 10:33:33 AM] OUI-67179:
The local system has been patched and can be restarted.
[Apr 23, 2013 10:33:33 AM] Finish applying patch to local system at Tue Apr 23 10:33:33 EDT 2013
[Apr 23, 2013 10:33:33 AM] OPatch will clean up 'restore.sh,make.txt' files and 'rac,scratch,backup' directories.
You will be still able to rollback patches after this cleanup.Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful) -
Hi
I have VS 9 installed and was wanting to install LightSwitch so downloaded the ISO(VSLS2011_ENU.iso) and burnt to disk ran
setup.exe and received the this message.
"Setup could not install the following component:
Microsoft ApplicationError Reporting"
The log shows..
[02/09/15,13:52:02] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/09/15,13:52:03] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/09/15,13:52:04] SimpleUI: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
[02/09/15,13:52:05] SimpleUI: [2] DepCheck indicates VC 9.0 Runtime (x86) was not attempted to be installed.....
.NetFramework 3.5
C:\Users\xxxxxx>Winmgmt /verifyrepository
WMI repository is consistent.
PC is win 7 pro 64bitHi ghw123,
Welcome to Lightswitch forum.
According to the error message above, this issue is related to verification. For this issue, you need make sure that you download VSLS2011_ENU.iso from Microsoft official site, see:
http://download.microsoft.com/download/8/0/0/80047AD9-1D3E-46EB-8CF8-DFDA59E7799D/VSLS2011_ENU.iso
In addition, if you want to learn LightSwitch, I'd like to suggest you to download VS2012 or VS2013, many new features are added to them. see:
http://www.visualstudio.com/en-us/downloads
You need select the Lightswitch option when you install VS2012/VS2013.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Patch install error
As part of the Upgrading developer 6i with E-Business 11i
I was asked to apply patch 4586086
The following command failed
make -f cus_forms60w.mk libso_install
make: *** No rule to make target `libso_install'. Stop.
I was asked to
To Check X version
===================
Linux:
rpm -qa|grep openmotif
openmotif-2.1.30-4_MLI 7.1
openmotif-2.1.30-11
openmotif-devel-2.1.30-11
I am running SUSE Linux
Is it important to have only the above.....
Could I not have the latest version of openmotif ?
Please guide meHi
This is my current situation.
I installed the patches recommended by you.
Currently the output of rpm -qa|grep motif is
oracle@test-app:/apps11510/dev/devora/8.0.6/bin> rpm -qa|grep motif
openmotif-libs-2.2.2-519.4
openmotif-2.2.2-519.4
openmotif21-libs-2.1.30MLI4-119.4
I am applying patches as per document 125767.1
I think I must have made some mistake in the sequence of steps or some other error....
First let me give some details about my environment
We have two servers
a) test-db
This runs Oracle database and
Reports Server and
Concurrent Manager and
Reports review agent
b) test-app
This runs Forms Metric Server and
Forms Server Listener and
Forms Metric client and
Report Review agent and
HTTP Web server and
Discoverer Server and
Fulfillment server
I am confident that I have correctly followed all steps 1 - 5 of the
document 125767.1
Now step 6
I have installed all the following patches on ONLY test-app
6194129 and
7343387 and
7156414 and
6125732 and
6857221 and
3830807 and
4586086 ( This is where it failed)
Question - Should I have installed these patches on both servers test-app and test-db
Question - should all the patches mentioned in the document be applied
(6194129,7343387,7156414,6125732,6857221,3830807,4586086)
as part of step 6 and step 7 and then move to step 8 ? -
I'm attempting to download a plug in or patch to rectify the inability to open RW2 files in Photoshop CC 2014. I'm trying AdobePatchinstaller but keep getting an install error. Any advise?
Thank you but the issue has been rectified. Adobe tech support led me through the process of updating all of my apps.
a r o 2 0 1 4 -
Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener
New Installation of R12.1.1 on Linux x86-64
using zip files from e-delivery
created staging dir successfully
Ran rapidwiz
selected new Installation and Express Installation
Rapidwiz worked and installed all files but it failed at the end during validation for post install
when showed screen for Validate System Config the post-install check:
I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
details of error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
some other facts,
I cannot run sqlplus, no access to database.
it seems environemt variables are not set as echo shows empty value.
since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
tried solution 1:
I was able to run APPSVIS_localhost.env
however i canNOT connect to sqlplus
therefore no access to database:
pwd
/d01/oracle/VIS/apps/apps_st/appl
[root@localhost appl]# chmod 777 APPSVIS_localhost.env
[root@localhost appl]# ./APPSVIS_localhost.env
[oracle@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
[applmgr@localhost bin]$ ./sqlplus
./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
[applmgr@localhost bin]$
when echo oracle env variables they are all empty:
for example:
[oracle@localhost scripts]$ echo $APPL_TOP
Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
couldn't even use script v as I got error:
[oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
[oracle@localhost scripts]$ ls adst*
adstpall.sh adstrtal.sh
[oracle@localhost scripts]$ ./adstpall.sh apps/apps
You are running adstpall.sh version 120.10
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh: exiting with status 1
also in another question in forum
RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
it is asked to try this:
... commented out the following line:
#eval ohs_start -DSSL "$args"
... and replaced it with:
eval ohs_start "$args"
I have not tried this, i think my issue is with database and sql which cannot be accessed.
solution 2:
Tried workaround from Note 943443.1
but first i cannot see any file with # ls libdb*:
[root@localhost inst]# cd /usr/lib
[root@localhost lib]# ls libdb*
ls: cannot access libdb*: No such file or directory
after running the command from the Note:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
now, I can see libdb.so.2:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ls libdb*
libdb.so.2
then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
but still fails with same error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
solution 3:
tried to stop and restart services:
[oracle@localhost VIS_localhost]$ pwd
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
[oracle@localhost VIS_localhost]$ ls -ltr add*
-rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
-rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
your help is highly appreciated
thank you!Thank you
items 1, 2 and 3 are answers to your questions,
I think you pointed to an important section as i have feeling something is
wrong with this simple default choice of localhost.localdomain.
please also see #4 as it has new information (the rapidwiz error are fixed now
but i still don't have access to anything)
1-) file: /etc/hosts
i have 2 lines in this file
[oracle@localhost etc]$ pwd
/etc
[oracle@localhost etc]$ cat hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost.localdomain localhost localhost6.localdomain6
[oracle@localhost etc]$
2-) file: /etc/sysconfig/network
i have 2 lines in this file:
[oracle@localhost sysconfig]$ pwd
/etc/sysconfig
[oracle@localhost sysconfig]$ cat network
NETWORKING=yes
HOSTNAME=localhost.localdomain
3-) per step 3- of note 761564.1 I deleted file (using root accout):
/etc/sysconfig/networking/profiles/default/network
(before deleting i made a backup network-bak, just in case):
[oracle@localhost default]$ pwd
/etc/sysconfig/networking/profiles/default
[oracle@localhost default]$ ls -ltr
total 16
-rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
-rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
-rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
-rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
[oracle@localhost default]$
4-)
I made so many changes to dir access permissions using chmod 777,
also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
the errors),
then I clicked Next button ( which of course went to the same screen I had error on )
then I clicked on Retry button and it appeared it fixed errors.
Rapidwiz confirmed all sections are ok,
no errors anymore.
(Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
then Retry button).
I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
but right now, I completed rapidwiz and all errors are fixed,
however I still don't have access to anything:
Started firefox and try to go to:
http://localhost.localdomain:8000/QA_HTML/AppsLogin
it says Unable to connect
(by the way do I have to download IE and try in there or should it work in Firefox as well ?)
I am unable to run sqlplus
I don't have anyvalue in the environment variables, they are still empty.
I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
2.2
[oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
AutoConfig completed with errors.
2.3
[oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
Configuring IES_TOP.......COMPLETED
Configuring CSD_TOP.......COMPLETED
Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
still same problem, didn't change results.
Thank you for your help! -
Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZA0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh -
[SOLVED] Error uninstalling eclipse: "post-install: command not found"
When I try uninstalling eclipse , I get "error: command failed to execute correctly"
w0ng@e8500 ~
% sudo pacman -Rns eclipse
checking dependencies...
Targets (8): glib-networking-2.30.2-1 gsettings-desktop-schemas-3.2.0-1 gstreamer0.10-0.10.36-1
gstreamer0.10-base-0.10.36-1 libproxy-0.4.7-1 libsoup-2.36.1-1 libwebkit-1.6.3-1
eclipse-3.7.2-2
Total Removed Size: 243.84 MiB
Do you want to remove these packages? [Y/n] y
(1/8) removing eclipse [######################################] 100%
/tmp/alpm_eY6rVO/.INSTALL: line 10: post-install: command not found
error: command failed to execute correctly
(2/8) removing libwebkit [######################################] 100%
(3/8) removing libsoup [######################################] 100%
(4/8) removing glib-networking [######################################] 100%
(5/8) removing libproxy [######################################] 100%
(6/8) removing gsettings-desktop-schemas [######################################] 100%
No schema files found: removed existing output file.
(7/8) removing gstreamer0.10-base [######################################] 100%
(8/8) removing gstreamer0.10 [######################################] 100%
w0ng@e8500 ~
But all files appear to be removed successfully.
w0ng@e8500 ~
% sudo updatedb && locate eclipse
/usr/share/highlight/themes/edit-eclipse.theme
/usr/share/icons/Faenza/apps/16/eclipse.png
/usr/share/icons/Faenza/apps/22/eclipse.png
/usr/share/icons/Faenza/apps/24/eclipse.png
/usr/share/icons/Faenza/apps/32/eclipse.png
/usr/share/icons/Faenza/apps/48/eclipse.png
/usr/share/icons/Faenza/apps/64/eclipse.png
/usr/share/icons/Faenza/apps/96/eclipse.png
/usr/share/icons/Faenza/apps/scalable/eclipse.svg
/var/abs/community/eclipse-cdt
/var/abs/community/eclipse-cdt/PKGBUILD
/var/abs/core/licenses/eclipse-1.0.txt
/var/abs/extra/eclipse
/var/abs/extra/eclipse-ecj
/var/abs/extra/eclipse/PKGBUILD
/var/abs/extra/eclipse/eclipse.desktop
/var/abs/extra/eclipse/eclipse.install
/var/abs/extra/eclipse/eclipse.sh
/var/abs/extra/eclipse/eclipse.svg
/var/abs/extra/eclipse-ecj/PKGBUILD
/var/abs/extra/eclipse-ecj/ecj
w0ng@e8500 ~
Should I be concerned or is everything fine? Can anyone reproduce this?
Last edited by w0ng (2012-03-28 19:00:30)Check /var/abs/extra/eclipse/eclipse.install. Typo in post_remove: post-install should be post_install. You can run the post_install manually (and maybe report this in the bug tracker), but it just updates the gtk icon cache, so it's nothing to worry about.
Maybe you are looking for
-
Okay so my brother game me his WD mybook 400GB and I plug it into my mac but the computer doesn't reconize the hard drive. When i say doesnt reconize i mean its just like i never plugged it in, nothing shows up. Can anyone help please?
-
Somehow I have the Ipad voice on again. How do I disable it?
Somehow I have the Ipad voice back. How do I disable it?
-
Liquid {module_cataloguelistdump} - render items to remove ul
Hi I think this is a classic benefit of using Liquid to control what's rendered, but I can't get it working. I basically need to remove the <ul></ul> tags and render just the <li> items using a custom template. The module ref is: {module_cataloguelis
-
I have been using facetime for past two months and everything was working fine, but yeaterday when i tried calling someone using facetime the a meesage appeared which said " warning this might be a phishing website" then two options are give either t
-
Can't replicate session. ClassNotFoundException TransientHolder(trinidad)
I'm using : Using JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.1 Weblogic WLS10_11.1.1.5.0_GENERIC_RELEASE I have a clustered setup: One cluster, two servers running in the same cluster cluster1 - mserver1, mserver2 I'm performing HA Testing I have de