5.5 Crashes when using the pin puppet tool
Hopefully somebody can help me. Every time I try to use the pin puppet tool, I get the same error message:
After Effects error: Crash in progress. Last logged message was <7320> <DynamicLink> <5> 000000001B5098D0
Folloed by a message apologizing for the error and a last chance to save the project (which sometimes saves a blank project).
I wasn't using any large images or doing anything to overload it. Help, please?
Thanks for replying Todd. I do submit every crash report. I have been trying to re-enact my crashing problems and I have only slightly narrowed it down.
I have noticed that the puppet pin tool only crashes my large projects (Illustrator file @ 3840x2160res fit into an AE comp of 1920x1080res with 30+ layers). My projects here at work deal with short animations, but I have made my comp size large so that I can pan around my scenes. I'm only using the puppet pin tool on 1 or 2 layers, but I feel that the program just freaks out because I have so many layers in my shots.
After AE crashes and I reopen it, I don't have a problem with the puppet tool again.
Similar Messages
-
PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise
PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise
I have a similar thing happening here, but on my aging iMac8,1 (3.06, 6 gigs of ram, plenty of internal and external scratch space) No wacom here, a Logitech mouse though, running via USB overdrive.
With me it's undos that are typically causing the hang, and as such, I notice it happening and don't keep clicking around. It hangs for anywhere from 30 seconds to 3 minutes or so and then I can continue working. Once, it was happening on a document I had open for a while, once it was occurring on a file I opened, made an errant click, and hit undo. This was a 46.6 MB CMYK tif. I also had it occur while drawing a simple selection with the polygonal lasso - each time it would hang on the third click. That time, it would unhang, but then the selection would be all messed up and not display what was being selected.
Each time it happens, I see photoshop pinned at 99-100% in iStat. Doesn't seem to be related to running out of memory, as there is usually a good amount free when it's happening. I tried using the internal drive as the swap, and that didn't seem to matter.
I've been forced to go back to CS5 for the time being, but would love to see this solved. Is there any further info I could provide? -
Adobe Photoshop CS4/5 Crashes when using the Move Tool
Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel -
Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!
Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium -
Safari crashes when using the dialog box to import/save files, in facebook under windows 7
I've encountered the following errors in some PCs, running Safari 5.1.7 in MS-Windows 7 Pro:
Safari crashes when using the dialog box to import/save files. One doesn't have to actually upload or download any file, the mere invocation of the relevant dialog box brings down all open Safari windows after a couple of seconds.
Errors displayed in the Event Log are:
Όνομα ελαττωματικής εφαρμογής Safari.exe, έκδοση 5.34.57.2, χρονική σήμανση 0x4f982b5e
Όνομα ελαττωματικής λειτουργικής μονάδας CoreGraphics.dll, έκδοση 1.87.0.0, χρονική σήμανση 0x4f9739a0
Κωδικός εξαίρεσης: 0x40000015
Μετατόπιση σφάλματος: 0x0013a762
Αναγνωριστικό ελαττωματικής διεργασίας: 0x17f4
Χρόνος έναρξης ελαττωματικής εφαρμογής: 0x01cded6b09576023
Διαδρομή ελαττωματικής εφαρμογής: C:\Program Files\Safari\Safari.exe
Διαδρομή ελλατωματικής λειτουργικής μονάδας:C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
Αναγνωριστικό αναφοράς:ebe64ac9-595e-11e2-a977-0016356671d1
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:00.000000000Z
EventRecordID
95609
Channel
Application
Computer
computername
Security
EventData
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
17f4
01cded6b09576023
C:\Program Files\Safari\Safari.exe
C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
ebe64ac9-595e-11e2-a977-0016356671d1
and
Ελαττωματικός κάδος (bucket) 2970527469, τύπος 1
Όνομα συμβάντος: APPCRASH
Απόκριση: Δεν υπάρχει
Αναγνωριστικό Cab: 0
Υπογραφή προβλήματος:
P1: Safari.exe
P2: 5.34.57.2
P3: 4f982b5e
P4: CoreGraphics.dll
P5: 1.87.0.0
P6: 4f9739a0
P7: 40000015
P8: 0013a762
P9:
P10:
Συνημμένα αρχεία:
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
Αυτά τα αρχεία μπορεί να είναι διαθέσιμα εδώ:
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
Σύμβολο ανάλυσης:
Επανέλεγχος για λύση: 0
Αναγνωριστικό αναφοράς: ebe64ac9-595e-11e2-a977-0016356671d1
Κατάσταση αναφοράς: 0
+
System
Provider
[ Name]
Windows Error Reporting
EventID
1001
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:10.000000000Z
EventRecordID
95610
Channel
Application
Computer
computername
Security
EventData
2970527469
1
APPCRASH
Δεν υπάρχει
0
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
0
ebe64ac9-595e-11e2-a977-0016356671d1
0
I have tried in-installing safari but it seems not to help. I have tried installing it to a third, newly installed pc and come to the same result.
All PCs are fully up-to-date as it regards Microsoft and Apple patches. Any ideas as to why this might happen?Still having the same problem. Ever the optimist, I submit the following info.
Error window screenshot can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_01.JPG
Enent log entry can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_02.txt
Version info can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_03.JPG -
When using the smart brush tool, my image gets distorted. Is there anyway to fix this?
What preset have you selected?
Can you post a screenshot showing the distortion.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Cursor leaves when using the spot removal tool
the cursor leaves when using the spot removal tool if i drag it to the right. how do i find it again?
Below the image, to the left is the <Tool Overlay> feature. Click on the double-triangle and select <Always>. If you have it set to <Auto> it disappears when you leave the image area.
See screen shot:
If you don't see the <Tool Overlay> press letter T on your keyboard to make the toolbar visible. -
Pages Software keeps crashing while using the Instant Alpha tool???
Hey All-
While working in Pages that came preloaded on my new iMac-it keeps crashing while using the Instant Alpha Tool??? Any help on what to do for this????
Rather frustrating-thanks for any help.
CPEI59Hey All-
While working in Pages that came preloaded on my new iMac-it keeps crashing while using the Instant Alpha Tool??? Any help on what to do for this????
Rather frustrating-thanks for any help.
CPEI59 -
When using the clone stamp tool and press the alt key layer just moves
when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?
Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.
-
When using the spot removal tool, the sampled area is not showing. I fully remember that I am seeing this before--I already had updates of my LR5
Is this just a setting?Thank you! I feel so stupid -- I did search the internet--maybe not hard enough.
-
Aperture crashes when using the Crop Tool
I have tried using Aperture in 32 and 64 bit modes. I have the same problem in both when using the Crop Tool. Immediately after I hit "RETURN" key to finalize the crop I have chosen, the VIEW screen goes blank and the SPINNING BEACH BALL appears. I go to the "Force Quit" dialog and Aperture is highlighted in red--signifying a crash (unresponsive application).
THIS is happening more frequently.
Help!!I had a similar problem. I solved it with these instructions on my blog.
http://maximegousse.wordpress.com/2010/12/05/my-aperture-library-crash/
Max -
Why does Adobe 9 standard crash when using the digital signature
When using the digital signature in Adobe 9 standard it crashes, it has been repaired, uninstalled and reinstalled and still crashes when putting in the digital signature and not understanding why. Also the digital signature was redone. Your thoughts on this would be most helpful.
I had the same problems and was VERY frustrated.
I finally solved my problem by uninstalling reader 9.1, air, acrobat.com and THEN after a restart, installing a lite version of reader 9.1 from this site:
Good Luck!
rufus78 -
Sharepoint Designer always crashes when using the Sharepoint people/group picker in a Workflow
SharePoint designer 2013 (sp1) crashes consistently when doing the following:
Create workflow
Create email action
In the email To field select People/Groups from SharePoint site
SharePoint Designer crashed and says "Microsoft SharePoint Designer has stopped working"
This issue has been reported before in SharePoint 2010 on TechNet as a bug in the software, but with no proper resolution. I am very surprised that it is still an issue in 2013 version (sp1 which was released Feb 2014) and Microsoft have not tried
to address this.
I have read elsewhere that the fix for this is to only have a single IIS binding for the site being used (ie not have additional alternate access mappings). However this is not possible for us as we need the additional alternate access mappings.
Any help/suggestions gratefully received.
Thanks
Bill WOne way is as you mentioned try the below link
http://xblogs.kompas-xnet.si/post/SharePoint-Designer-2013-Crashing-when-using-select-peoplegroups-from-SharePoint-site.aspx
Instead of setting people picker's Return field as "As String" could you please try setting the return field as Email Address
Destin -MCPD: SharePoint Developer 2010, MCTS:SharePoint 2007 Application Development -
Is you mail app crashing when using the trash can delete??
Is anyone having a problem with mail app. crashing after using the trash can delete. I am no longer using the trash can so I have not had another mail crash. Swipe and delete and edit and delete work ok. Only the trash can delete causes the problem.
Alberta....I first tried the reset, which didn't work, so I had to do a full restore. Which helped has corrected the problem. I just can use the trash can delete.
-
Lightroom 5.2 freezes when using the spot edit tool with Wacom Intuos 5
Hi,
I've been using Photoshop 6.x with my Intuos 5 for almost a year and it's been great. I recently purchased Lightroom 5.2 only to discover that when I use the spot edit tool that it freezes when i use this tool as a brush. It starts off smooth, but after brushing across my area i want to clone/heal, Lightroom seems to freeze up, and the spot edit tool is unusable. I can lift my pen off the tablet and a few seconds later Lightroom comes back, but the tablet is basically unusable to me. The mouse works perfectly fine.
I've read other posts at the end of last year '12, that walks through some regedits and disabling some other tablet functions, but none of those work for me. Any suggestions would be appreciated.
Thanks Ed
Lightroom version: 5.2 [922700]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 8
Processor speed: 2.7 GHz
Built-in memory: 16375.0 MB
Real memory available to Lightroom: 16375.0 MB
Real memory used by Lightroom: 429.4 MB (2.6%)
Virtual memory used by Lightroom: 403.7 MB
Memory cache size: 300.8 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 144 DPI
Desktop composition enabled: No
Displays: 1) 1920x1200
Adapter #1: Vendor : 1002
Device : 9498
Subsystem : 16031462
Revision : 0
Video Memory : 1005
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x20
CardID: 38040
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: ATI Radeon HD 4600 Series
ShaderModel: 10.1
Vendor: AMD
VendorID: 4098
Version: 1002:9498:16031462:0000I solved my own issue. I saw an article @ http://www.lightroomforums.net/showthread.php?19694-Spot-removal-tool-doesn-t-work-with-Wa com-Intuos-5-in-LR-5 that solved my issue.
Step 1:
Walcom Tablet Properties
Step 2:
Click on Customize and change the default line graph from this:
Step 3:
To this
Step 4:
Click OK.
After that, my spot edit tool stopped freezing in LR 5.2 while i was using my intuos 5 pen.
Prior to doing this, I also did the procedure listed here: http://forum.wacom.eu/viewtopic.php?f=10&t=8036
So it's possible that both need to be done in order for the freezing to stop. I hope this can help others.
Maybe you are looking for
-
I have made a new document type for Sub contracting incase of PO creation. How can I make the Item category L as a default value for that Documenet type, i.e As soon as I choose the document type as Sub- contracting in PO, the item category should ha
-
All my pix went to "negatives". how do I get them back to normal color?
All my pix became "negatives"? What did I do and how do I get them back to normal color?
-
Hi, Still i was a pl/sql programmer in windows platform. Now a sudden requirement to work pl/sql in unix environment. I very much new to unix. I dont know how to proceed. Please suggest start point where should i start...please help me thanks asp
-
Subquery is not allowed within FILTER arguments
In a report I need to show two columns of same type but with values obtained with different criterias. The criterias are difined in 2 different reports Report Month, ColumnA , ColumnB, Number_of_Nights ColumnA refers to the actual column Member_id= c
-
Converting an existing iDoc to an XML file
Hi experts I want to create an xml file from an iDoc. Is there a program/function module in R/3 that can achieve this? I am running ECC 6.0 Thanks in advance