5 days old Mbp 13, istat show that the health is reduced to 96% WITH ONLY 4 CYCLES!

Hi to everyone, here's my trouble!
As it shows full charge, and health to 96% in  5 days after I purchased this one to replace my 2008 mbp15. Also the battery drains a lot faster than I expected, and I'm only doing web surfing at this time, don't have time to install protools yet.
I know, you might say, "dude, 96% is a good battery " My answer to that would be "4 cycles!!!!"  I also read that other mbp 2011 are having drain problems, don't know if they use istat, but I used it on my  previous mbp and always showed correct info.
Any comment on similar situation, please let me know. I will keep searching for info
Thanks for the space! Cheers!

Would you stop stressing?
Go have a read through the forums at all the posts about batteries, and you will find the majority are the same question you are after 4 cycles.
It's going to last you 2+ years if you treat it right / 300+ cycles.
I've seen people post saying their battery is stuffed after 800+ cycles!
And they are $100 to replace... Seriously, is it really worth stressing over 4%?
Just enjoy your new mac & have fun!

Similar Messages

  • I bought an album and one of the songs did not download completely.  It shows that the song is 3:17 seconds but only got 40 secs. of it.  How can i get the rest of the song back?

    I bought an album from itunes and one of the songs did not download completely.  It shows in the player that it is 3:17 but only plays for 40 secs.  How can i get the entire song back?

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • Imac 13,2 with 3 RAM chips instead of 4 RAM Chips. Is there any hard data supporting the fact that the iMac will not run optimally with only 3 chips versus 4?

    I have a imac 13,2 with 3 of the 4 memory(RAM) slots filled. Two with 4gb chips and one with an 8gb chip. Is there any reports or statistics to support using matching pairs(4 chips) of ram versus running 3 chips? Is the machine running optimally w/3 chips? Or does it not matter with these newer imacs as each RAM slot is fully iundependent of each other therefore getting the most out of each chip no matter if 3 slots are filled or 4 slots are filled?
    Thanks for any reponses.

    There were some models which would not boot at all if a certain slot was not occuplied:
    http://support.apple.com/kb/HT1423?viewlocale=en_US#4

  • Bought my  MBP one week ago, but the health of battery has declined to 94%.

    G' Day Friends, I bought my MBP one week ago, but ISTAT shows that the health of battery now has declined to 94%. It's really ridiculous because it declined from 99% to 94% in the last three times I charged my battery. Is there a problem with my battery? or just the ISTAT is not exact?.... how can I deal with such a situation?......
    Look forward to your reply....
    Many thanks...

    Hi Loophy: During the first few charge/recharge cycles the "battery health" can fluctuate quite a bit. If it continues to deteriorate it may be an issue, but at this early stage, it isn't an issue. Please see the excellent collection of battery tips below.
    http://discussions.apple.com/thread.jspa?threadID=1764220
    Stedman

  • 2 day old MBP not running off AC adapter.

    My two day old MBP is refusing to tun off of the charger. Yesterday I had no problems with it, But now when I plug in the magsafe the light doesn't come on or anything.
    Twice I have switched the power outlet that the charger was plugged into and it worked until I looked at the battery charge level in both Leopard and WinXP. At witch point the charger quit working.
    Battery currently at 41% and charger still not working.

    Yes... send it in for repair or take it to an Apple retail store or authorized service provider for diagnosis and/or repair.
    You have called Apple support by now haven't you?

  • While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

    While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

    Howdy Mishka2015,
    The article linked below details a number of troubleshooting steps that can help resolve issues with your contacts and iCloud.
    Get help using iCloud Contacts
    https://support.apple.com/en-us/HT204150
    Sincerely,
    Allen

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • HT4628 My airport show that the airport card doesn't install. How can I solve this symptom? It's usable 2 days ago.

    My airport show that the airport card doesn't install. How can I solve this symptom? It's usable 2 days ago.

    Usually, if your Mac tells you "no AirPort card installed", it's because of power not properly being supplied to the AirPort card. Sometimes this symptom is related to hardware issues.
    Reset the SMC of your computer. There are different ways of resetting, depending on the Mac you are using.

  • HT4623 trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after

    trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after that this happen. i tried with other sim same message come again and again.if any body know solution let me know. thanks

    Was the SIM card activated on another phone? I assume this is an ATT style trying to use on T-Mobile? Was the SIM installed correctly? Is the carrier (like T-Mobile) operating IOS 6 devices yet?
    If the SIM is a valid SIM from say T-Mobile, you may want to contact them for assistance activating the SIM card.
    Activation and SIM issues typically point to the carrier. And if this was a CDMA phone say working with verizon, it will NOT work for ATT or T-Mobile as they use different electronics on the 3GS. The SIM slot is for international use only.

  • Why my old emails are not showing on the blackberry

    Hi Guys,
    I have just bought Blackberry Curve 9360. Can somebody, please tell that why my old emails are not showing on the blackberry. May be it has not synchronized my whole mailbox.
    Kindly advise how can I do that.
    Regards... Murtaza

    Old emails, in what manner? As in previous to installing the account on this device?
    Did you use the Device Switch Wizard found in the BlackBerry Desktop Software?
    How did you move your old emails over from the old device to the new?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am using an iphone 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.

    HEY GUYS I AM USING AN IPHONE  3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
    AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
    PLEASE HELP ME.

    This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.

  • Tried to open a file I created in Numbers a while ago which I modified on 11/4/13 and got a message that I needed a newer version of Numbers.  When I went to the Mac App Store it shows that the new version is already installed.  Any suggestions?

    Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers.  When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it.  When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3".  Any suggestions as to how I can get the new version installed?

    Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

  • I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info?

    I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.

    Hi wmcknigh,
    Welcome to Apple Support Communities.
    The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
    If you don't see your family's shared content - Apple Support
    Cheers,
    -Jason

  • Tried to reinstall iPhoto library from external hard drive, it shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.

    My hard drive crashed recently and we took it to apple to get repaired. The apple employees said that they would have to replace the hard drive but they didn't have the equipment to get the data off my hard drive. So I took it to a computer store who had the right equipment after a month and a half of waiting they finally got all the data off my hard drive and put it on an external hard drive (Seagate Expansion Portable Drive). I then took it back to apple who replaced the hard drive. Now I'm in the process of reinstalling everything. I have never done a Time Machine back up or backed my laptop up to . Which I now will do very often once I've reinstalled everything. I have reinstalled all of my desktop images and folders as well as my iTunes library with no issues. However when i went to reinstall my iPhoto library it came up blank. I then Rebuilt the library several times and this was the result.
    It shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.
    Please help i have three years worth of images from holidays on here and would be devastated if i lost them.

    iPhoto cannot find the thumbnails or the original pictures.
    Go to your iPhoto Library in the Pictures Folder.
    Right-click on it and from the resulting menu, choose 'Show Package Contents'.
    This will bring you inside the iPhoto Library package. There you should see a Folder called Masters. Within that, there should be folder containing your actual photos.
    Are they there?

  • When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

    When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

    Settings > Messages > Send & Receive > Start new conversations from:
    Only your phone number is selected.

Maybe you are looking for

  • Loading Apps Applet

    Hi All, I have a question, i.e, as soon as we logon into apps from the front end, we see the products list for apps and the list of menus and responsibilities. on which after choosing any one the apps applet is loaded. During this loading of the appl

  • Internal mic wont shut off even though its disabled. How do I fix this?

    Im trying to run samplitude music studio mx software and use the line in and mic in ports to record. The external mic that's built into my laptop wont shut off, and records background noise on my tracks. I have an HP Pavilion dv7-6c95dx with an i7-26

  • Elitebook "b" , "n" ,Caps , "-" , " " group of keys stopped working abruptly

    This is a Elitebook 8460p under warranty. Neither me nor the tech.  field support is able to figure out what's going . At the outset  - If you feel ANY of the above letters missing in the write up , its because I did not ,"toggle invoke"  my virtual

  • Update using a Function in select satement

    Hi Is it possible to do follwing . i have tabele and a custom fucntion , the custome function will update the column(amount) in the table a based on the value pass through the function from the select statement . select id, amount , outstanding from

  • Strange behavior of auto-create destionations and access control

    I'm noticing some strange behavior that looks like a bug in IMQ 3.5 SP1 (and earlier). I can't find any mention of this in the Sun Bug parade so I thought I'd ask here. Background: 1) Admin-created queue named 'foo' exists. Verified with imqcmd. 2) U