5 Easy steps to get your iPhone Application Uploaded to iTunes via the Flash Packager for iPhone
1. Go to the iOS Provisioning Portal and setup your Distribution Certificate & Distribution Provisioning Profile (this is Distribution NOT Developer so make sure you select the other tab).
2. Generate a .p12 Certificate from the Distribution Certificate (the .mobileprovision is fine how it is).
3. Within the Flash IDE select your Distribution Certificate & Distribution Provisioning Profile to be used then make sure you select under iPhone deployment type, Deployment - Apple App Store. Generate your .ipa file.
4. Transfer your .ipa file to a Apple Mac Computer, rename the .ipa file to .zip file extension, then extract the .zip file it will output a folder called Payload open it and within that folder will be a file with the same name as your Application. Right click and select Compress.
5. Now open up Application Loader and your good to go!
Ok well not so easy ...
Taken from my blog
I'm trying look that..
February 16, 2011 11:05
[email protected]
Waiting For Upload
February 16, 2011 11:05
Apple
Invalid Binary
February 16, 2011 11:04
Apple
Upload Received
February 16, 2011 11:01
[email protected]
Waiting For Upload
February 16, 2011 10:55
Apple
Invalid Binary
February 16, 2011 10:55
Apple
Upload Received
February 16, 2011 10:31
[email protected]
Waiting For Upload
February 16, 2011 10:31
Apple
Invalid Binary
February 16, 2011 10:31
Apple
Upload Received
February 16, 2011 10:29
[email protected]
Waiting For Upload
February 16, 2011 10:18
Apple
Invalid Binary
February 16, 2011 10:18
Apple
Upload Received
February 16, 2011 10:17
[email protected]
Waiting For Upload
February 16, 2011 09:37
Apple
Invalid Binary
February 16, 2011 09:37
Apple
Upload Received
February 16, 2011 09:35
[email protected]
Waiting For Upload
February 16, 2011 09:23
Apple
Invalid Binary
February 16, 2011 09:23
Apple
Upload Received
February 16, 2011 09:19
[email protected]
Waiting For Upload
February 16, 2011 08:51
Apple
Invalid Binary
February 16, 2011 08:50
Apple
Upload Received
February 16, 2011 07:35
[email protected]
Waiting For Upload
February 16, 2011 07:10
Apple
Invalid Binary
February 16, 2011 07:10
Apple
Upload Received
February 15, 2011 13:07
[email protected]
Waiting For Upload
February 15, 2011 13:00
[email protected]
Prepare for Upload
Similar Messages
-
How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time
How are you dialing these calls?
-
How can you get your iPhone videos to compress to one video instead of 5 different frames?
How can you get your iPhone videos to compree to one video instead of different frames
It sounds like you to 5 separate videos. If you start recording, then stop it, then start it again, you will have 2 videos. Not 1. As for splicing them together, you will need a video editing package for your PC. I don't know if Windows Movie Maker (or whatever they're calling it now) can handle this or not. On a Mac, I'd say just use iMovie.
-
How do you get your iphone out of the connect to itunes screen?
How do you get your iphone out of the connect to itunes screen?
What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275
-
How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time
How are you dialing these calls?
-
I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing. And I can't download any app because problems with my account regarding the credit card but the information is correct and it says it is not!!!
You'll have to contact iTunes store support regarding your credit card information problem: http://www.apple.com/emea/support/itunes/contact.html. I'm not clear on what you're saying about your backup. Are you saying that when you connect to iTunes it's asking you to restore from backup even though you already have?
-
How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?
Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H. -
Can you get your previously purchased ringtones from itunes back when you switch to a new device?
Try here:
iTunes: Error 13019 during sync -
How do you get your songs to play after you authorized the computer your on?
how do you get your songs to play after you authorized the computer your on itunes?
Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola.
If it's a Mac, try Senuti or Music Rescue. -
How do you get your last batch of down loads to the new computer if the old one crashed before i was able to get it on my ipod
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519 -
Is it possible to get your crediti card cloned at ITunes?
I have my credit card cloned this second semester. Since I use it all onver the place, I didn´t think it was due the registration on ITunes. Now, in november, I got my second credit card cloned, shortly after changing my registration info on ITunes.
Is it possible to get your credit card cloned on ITunes?
i am really worried.From what I know the link when you use the itunes store is encrypted and your credit card details are not sent over the line when purchasing, as they are already on the server, only your username and password are sent to confirm your login.
If you updated the credit card details you should have no issue if you did it on the phone, if you did it on a pc, it could be the pc was compromised, but this is pure speculation. -
Two days ago I changed my apple id. Itunes recognizes my new apple id when I access itunes via the computer. when I try to make a purchase or update my apps on my iphone, it asks to give the password to the old apple id. How do i change it on my iphone?
Apps and music are forever tied to the Apple ID under which they were purchased. If you don't want to continue to get that message, delete the apps and purchase them again with your new Apple ID.
-
Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.....
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
What are the Flash alternatives for iphone and ipad?
Hello,
I would like to know what could be the Flash alternatives for iphone, ipod, and ipad. I would like to create iphone applications that have 3D animation I usually create with Flash.
But since Apple does not support the use of flash, I need to know what applications or programming languages I must use to create movies or animations for iphone or ipad.I would like to create iphone applications
Then you need to go here:
http://developer.apple.com/programs/iphone/
Maybe you are looking for
-
Compressor slow down after DVDSP/quicktime update
I am producing DVDs every week between 1 to 1.5 hours long. Usually takes compressor from 2 to 4 hours to render. After upgrading to DVDSP 4.1.2 and Quicktime 7.1.5 it has been 4 hours and the redering is just over half done. Activity monitor is show
-
High usage of MEMORYCLERK_SQLOPTIMIZER
What is MEMORYCLERK_SQLOPTIMIZER? Under what situations, this clerk will use more memory? I have a server which is SQL Server 2012 and MEMORYCLERK_SQLOPTIMIZER is consuming almost half of the max memory configured.
-
SOLARIS 8 SPARC: Find command 64bit-version
Hi to all. I have this situation: find / -name xyz -print Value too large for defined data typeOn the newsgroups I read: "That can occur if you run a 32-bit application on a file whose timestamp does not fit in a 32-bit time_t. To work around the pro
-
Billing date not to be PGI date
Dear Friends, presently my Billing date comes from the goods issue date, I need to have my billing date as on its creation date, is there a customising setting. Kind Regards ravi
-
Nonlinear least square fit problem
Hello, I have been trying to fit the data given in the attached file. When you click command button1, the routine goes thru the NonLinearFitModelProcedure, calculates some points and gives an error message like "The return parameter in NonLine