5 GHz not showing

I just setup my E3000 and am connected to the net and wifi.
I downloaded inSSider to see the wifi networks around, in case I needed to change channels.
I have two devices:
Laptop G band
Roku
I set the E3000 up as follows:
2.4 GHz set to 20 MHz (only choice) channel 1 and G only (for laptop)
5 GHz set to 40 MHz channel 40 and N only (I connected my Roku)
The SSID's are:
2.4 = felix
5 = felix5
The Laptop and Roku connect fine.
Why when I open inSSider and view wifi networks does it only show the 2.4 (54mbps) felix SSID
It doesn't show the 5 felix5 SSID at all.
I am accessing the inSSider from the G laptop.
What I am trying to find out as well is what speed my N connection is, I don't have an N device (other than the Roku) to be able to get a band speed.
Help would be appreciated
thanks

"G laptop" sounds like your laptop only supports the 2.4 GHz band and not the 5 GHz. Only adapters compatible with 802.11a do support 5 Ghz. If your adapter is only 802.11b/g compatible then it's only using 2.4 GHz.

Similar Messages

Crucial m4 256 GB internal SSD not showing in disk utility on MacBook Pro a1226 (late 2007) 2.4 ghz.

After the original Fujitsu 160gb hd died in my MacBook Pro (model A1226), I was advised at the Mac store to upgrade to a SSD. I installed the crucial m4 256gb internal SSD and powered on MacBook Pro from the Snow Leopard install disk so I could use disk utility to erase and reformat the new SSD.
The problem is the SSD is not showing up in disk utility. I have opened the computer twice and checked cable connections and still no luck. I have powered off computer and let sit for a while and tried again. I check compatability on crucial site before ordering SSD so I don't know what the problem is. Bad disk?

You were given bad advice.
Return/Sell the SSD and buy a 7,200 RPM hard drive instead, it should work fine and a more of a match for your older machine.
Your Mac doesn't have the faster SATA connections for a SSD also 10.6 isn't equipped for SSD's only hard drives, your basically putting a Ferrari engine in a Yugo, it can't handle it.
The 7,200 RPM drive will give you the performance and more drive space than a SSD anyway.
Follow these instructions when you erase and install 10.6, it will give the best results.
How to erase and install Snow Leopard 10.6

Flash CS6 not showing in FCP 7.03

I recently upgraded (well, for me it was an upgrade) to an older Mac Pro
Processor 2 x 3 GHz Quad-Core Intel Xeon
Memory 16 GB 667 MHz DDR2 FB-DIMM
Graphics ATI Radeon X1900 XT 512 MB
Software Mac OS X Lion 10.7.5 (11G63b)
I have installed FCP 7.03 (and in a seperate folder the hated FCP X)
I also have Adobe Creative Suite CS6 installed.
On my previous MacBook Pro I could export from a video sequence as a Flash Movie (.FLV). I could do this using one of the options in "Export Using QuickTime Conversion" On that machine I was running Flash CS4.
For some reason the Flash export option is not showing now. Flash is properly installed and opens just fine.
Anyone know what I'm doing wrong?
Thanks
A.S.

"Anyone know what I'm doing wrong?"
Probably nothing. FCP 7 was last updated in 2010; Flash CS6 was released in 2012. Incompatibility is to be expected.
There may be a conversion program, but it's most likely you'll find it on Adobe's Flash forum.
Good luck

1 TB External WD Drive Not Showing Up In Finder/Disk Utility/Terminal

Hey everyone,
First time posting here so forgive any mistakes. I recently purchased a Late 2013 Macbook Pro Retina, 15-inch, 2.6 GHz Intel Core i7 from Apple. Previously, I had the late 2007 Macbook Pro model until a friend spilled some water on it and corrupted the motherboard. Regardless, I was using a Western Digital 1 TB external hard-drive to keep all my documents and files backed up, manually, alongside the time machine feature built in. (This was not connected at the time of the spill, and was not thereafter, so rule out water damage) During the period between when the old one died, (earlier this year May-2013), I kept the drive safely in storage because I knew I would want to transfer my 100gb music librairy along with my photos and other files when I finally got the new one later that year (was waiting for the hardwell processors to come out for the MBP). Just recently after this purchase I tried to connect the drive to my new MacBook Pro but it was not showing up. I have scowered the online forums for trouble shooting tips and took all the steps to no avail. I have replaced the data-drive cable with a new one, connected it to the wall outlet in case it wasn't drawing enough power from the laptop, among a few other simple tricks, but still it would not show up in either Disk Utility or the terminal command to show all active drives, all that's there is the internal Macintosh HD one. It was a fairly quiet drive-however I do notice there is not much of a 'spin-up' noise or any sound of it begining to work when turned on or plugged in, so I'm worried there might be something wrong with the drive itself. Nonetheless, the power signal continues to flash but still no recognition from the computer that it's there, so I'm certain it's not reading it. I have tried on my other buddys Mac and it is the same situation, as well as my roommates PC (which I figured wouldnt anyway because of how its formatted, but it was worth a shot) I am not sure which avenue to take next as I have all my files and college work that I still need access to on the drive, and would really hate to have to format the drive or anything drastic as such. Possibly there is a part I can buy and replace myself to make it start up and spin again, but I am not sure what that part could be or if there is an easier solution out there.
I would greatly appreciate any information or help on this problem, thank you all for the time and advie.

Clicking from a hard drive is bad. Does the external drive have an external power supply? If it does I would use this supply.

Adobe Product Problems. Can't Install, or Uninstall programs. Also programs installed on my computer are not showing up in CC

I have tried many times but, I can not install any adobe products onto my computer (It does meet system requirements). It always is gets an "Installation failed" error at 42% I also can not uninstall adobe programs. I have Adobe after effects installed and I have tried to uninstall it. A window comes up saying "Uninstall Failed" and gives me some trouble shooting tips which I have tried many times. Another problem is when I open up creative cloud my installed programs do not show up. For example I have Adobe After Effects but, in creative cloud it is listed as uninstalled and has a button that says "Try" even though it is already installed onto my computer. I have problems with the CreativeCloudCleaner too. I have tried using it to uninstall programs but, when I choose the option to delete adobe CC products it only gives me the option to delete Creative Cloud and no CC programs. These are problems I have been trying to fix for days but, I have not yet found a solution anywhere.

64-bit Operating System (Windows 8.1)
CPU: AMD A10-4600M APU with Radeon(tm) HD Graphics (4 CPUs) ~2.3 Ghz
RAM: 6GB of RAM
Graphics: AMD Radeon HD 7660G
Is that what you need?

Audible books not showing up in home sharing

On my new mac mini I brought some books from Audible they appear in iTunes
under "Books" but they do not appear under the home sharing and I am unable to tranfeer
them to my older machine where I keep my media files

Guess I should have looked at FAQ first looks like Apple does not allow us to do this
Re: All audiobooks do not show up in home sharing
Mar 15, 2011 8:13 PM (in response to Carol G)
Just in case anyone else has this problem, here is what Apple replied to me: "Dear Carol, Greetings from Apple iTunes Customer Support. I am Sayantan and I am glad to assist you today. I understand you are unable to share audio books using home sharing. I know how upsetting it can be. I will help you with this. Unfortunately, you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files. In accordance with iTunes Store policy, you may share the music in your library and playlists with up to five other computers, provided the following conditions are met: 1. Your computer is using Mac OS X version 10.4.11 or later, Windows XP, Windows Vista or Windows 7. 2. The other computers are on the same local area network as your computer, in the same subnet. To share a song in a password-protected shared library or playlist, you will need to enter a password. To share a song that was purchased using an iTunes Store account that is not authorized on the computer you are using, you will need to enter the Apple ID and password with which the song was purchased. You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files. To prevent other computers on your network from seeing or listening to songs in your library or playlists, turn off music sharing. More detailed instructions about sharing music may be found in the Help menu. In iTunes, select iTunes Help from the Help menu. Click "Contents," type "sharing" (without quotes) in the search box, and press Enter. To read more about one of the topics that appears, double-click it. Carol, thank you for being a valued customer, your satisfaction is of the utmost importance. If you have further queries please write back to me. I will be happy to help you. Have a great day! Sincerely, Sayantan
iTunes Store Customer Support" Message was edited by: Carol G
MacBookPro 2.4 GHz, 4GB RAM, 256GB SolidStateDrive,, Mac OS X (10.6.6), Intel iMac +500GB ext.HD, 64GB iPad, 32GB iPodTouch, 32GB iPhone 4
All audiobooks do not show up in home sharing

Plug ins not showing

After migrating from tiger on a powerbook G4 to snow leopard 10.6.7 on 2.93 GHz i7 imac. all my plug ins are not showing in Garageband 11 (Atmosphere, Rmx, trilogie, FM7 etc ...)where should they go? I put some in HD> library> audio> plug-ins> components ... but still none showing when I am in GarageBand.
Thank you for your patience

You need to make sure that they are Universal Binaries, you can't use PPC plug-ins on an Intel machine.
You might need to see if there are updates available from the mfg.

Certain folders do not show in Finder.

Hello,
I have a MacBook Pro, OS X 10.9.4 version. Lately my Finder window does not show the files in certain folders in thumbnail view, which is my default use. So, if the folder is in thumbnail view, the files do not show. Only if I change to other views or search file name in Finder search bar, the files show. But it's been a hassle doing this everytime I open these folders. Happens with several folders. I do not really recall if this happened after an incident in particular or a software update, but it's been for almost three months. In case this would help, I overuse my devise and it might happen that I have a couple, sometimes more, of apps as Ai, Ps, InD, and Rhino opened at the same time. My MacBook is also 4 years old, and I have changed my hard drive two years ago. Processor is 2.26 GHz and Memory 2GB 1067 MHz. Any help with that..?
If this is not the right community, please help redirect.
Thanks in advance.

I assume this is the option that you are having the issue with.
When in this mode, have you clicked on the GREEN button in the upper left hand corner?
Ciao.
<Image Edited by Host>

Dvd drive does not show in Finder

My DVD drives (internal and external) do not show in Finder. Why?
If I insert a disk, it will show, but not till then.
I-Mac
Model Name:
iMac
Model Identifier:
iMac11,1
Processor Name:
Intel Core i5
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
4
L2 Cache (per Core):
256 KB
L3 Cache:
8 MB
Memory:
16 GB
OS= Mt Lion

I would like to burn to external as it is much faster and the internal is not liking me.
So, if I pick a file in Finder and click Burn to DVD, it tries to burn to internal.

External WD Hard Drive Not Showing In File Explorer

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?
a lot of these USB disks are garbage. Remove the hard disk from the case and connect it to an available desktop which will be able to read the disk.
the cheap usb controllers are often the cause of the problem
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Pdfs and MP3s in iTunes Folder not showing up iTunes Library - Please Help

Hi, I am running iTunes 10.7 on a 15 inch MacBook Pro 2.4 Ghz Intel Core i7 with 4 GB of RAM using OS X 10.7.5.
My problem is that when I bring the latest set of pdf and MP3 files I added do not show up in my iTunes library. If I go through the finder they are in the iTunes folder, but they will not display or play.
Thank you
Nucleus

They will not play or display even outside of iTunes? Not with Quicktime Player (for the mp3s) or Preview (for the PDFs)? If that's the case the files are probably corrupt.
Adding items to iTunes and not having them appear in the library is a recurring problem with newer versions for some.
Try restarting iTunes.
Check your recently added playlist. If they are there, try temporarily editing an item in the name, then restart iTunes and see if it appears.
Start iTunes, immediately hold down the option key and create a new, test library. Add the files to it. Do they add? If yes, then they are readable by iTunes. Go back to your old library using hte option key thing again.

Vignette in Speedgrade CC not showing up in Premiere CC via Direct Link

I used the Direct Link to SpeedGrade and did some color correction on some ProRes MOV files and added another Primary color correction with a vignette. When back in Premiere, the color corrections are fine but the vignette doesn't show up. Also, the vignette doesn't show up where the widget is placed. I have to move the mask widget to the left of the frame for the vignette circle to be in the center of the frame.

The footage is a 2K ProRes MOV scaled down. The vignette is still not showing up on the adjustment layer in Pr.
The weird thing is, in SpeedGrade, the vignette widget doesn't line up correctly on screen. I have to shift it way to the left out of frame for the vignette to line up correctly. Any ideas why this is happening? The Pr comp size is 640x640. Maybe that is effecting the vignette.
Apple Power Mac
OS X 10.9.3
2 x 2.93 GHz 6-Core Intel Xeon
29 GB 1333 Mhz DDR3
Pr CC 7.2.2
Sg CC 7.2.1x100

My Firewire Clone is not showing up in the Startup Disk selection window

Going to the Startup Disk section Under System Preferences to locate my mounted Firewire/cloned HD - But it's not showing up there for start up selection.
The external firewire clone, running OS X 10.4.11 shows up in the finder right away. Also I have mounted and used it as the start up disk on several other computers just fine. The current computer I'm having issues mounting to is a: 2 ghz Intel MacBook with 1 gb ram running 10.4.11
The previous computers that I have had success mounting to were a G4 ibook and a G5 imac(OSX 10.4.11). - Don't know if the Intel part is why I can't mount?
Any ideas or fixes - Thanks!

What to do if your computer won't recognize a FireWire device
http://docs.info.apple.com/article.html?artnum=88338
Dealing with FireWire problems (drives not mounting, devices unrecognized, etc.)
http://www.macfixit.com/article.php?story=20041221081432908
 Cheers, Tom

MacBook Pro with Draft n card - not showing n

I just got a Dell 1500 draft n card for my CoreDuo MacBook Pro. I installed it and the n enabler utility, but it is still not showing up as n compatible in Network Utility.
I have installed the AirPort Base Station Updater, repaired permissions, rebooted, installed the n enabler again, etc. But still no joy.
Any ideas?
Phil

Are you sure the enabler ran? Early reports said that the enabler would not run on a Macbook CoreDuo. However it worked fine for me for the when I installed the "n" card for the Macpro in my Macbook CoreDuo.
Check out the following
http://xlr8yourmac.com/systems/macbookprowireless_N_upgrade/macbookpro_N_cardinstall.html#storytop
Others say you need to use Pacifist to extract and run the enabler on a CoreDuo (again check the article). Also I have read somewhere that you can edit the installer to change a parameter value so that it will run on a core duo (I tried to find it but couldn't).
Don't give up - I have a great increase in range and speed. I was able to replace an old Airport extreme and 2 airport expreeses with a single new airport extreme.
Good luck.
Powerbook G4 12, Macbook Pro 15" 2 Ghz, iMac G5,20,BT, 250GB, 1GB RAM, Mac OS X (10.4.8)

Aperture 3 Not Showing Pictures in Edit But Otherwise OK

Hi,
Aperture 3 is not showing pictures in the edit screen. Previews are ok. Moreover, when I zoom in in the edit window, pictures are showing correctly. Also they are shown a second after an adjustment is applied (and, actually, if you hold the slider you can see the picture the whole time). It exports fine.
I've tried:
repairing permissions;
repairing database;
rebuilding database;
creating a new library and importing;
manually repairing the library as per https://discussions.apple.com/message/11700059#11700059
re-installing Aperture;
reparing permissions system-wide.
Nothing helps. I don't have the backup, obviously. System is Macbook Air 1.7 GHz i5, 4Gb.
Could anyone, please, help?
Thanks in advance,
G.

OK first off the procedure you referenced re: manually trying to rebuild a library is a last ditch, library is on fire, crashes the world procedure. It is never to be done as a first wave troubleshooting step and it is never to be done without a complete backup of the library. Hopefully that hasn;t added anything to the problem.
Ok that's out of the way. You should start by removing the filter you have on the browser. It's most likely not causing this but there is no need for it and it's only adding a layer of complexity we don;t need now.
What version of Aperture? If it is 3.2.3 (the latest from yesterday) did this start happening the? If it is not the latest you should upgrade.
Does this happen with all images in the library or only some? What type of images RAW or JPG?
If you create a new empty library and import a few images into it does the problem still happen? What if you make a new user and run Aperture as that user on a new library?
When did the problem start? Was it working OK before with this library?
Finally have you rebooted since this problem started?

5 GHz not showing

Similar Messages

Maybe you are looking for