5 ghz with Windows 8.1

I set up a separate band for 5 ghz with a new SSID on an EA6400 and hid it. When I select it and enter the password, I get a variety of errors which seem to occur randomly: BAD POOL CALLER; DRIVE irql NOT LESS OR EQUAL; SERVICE EXCEPTION; BAD POOL HEADER; and others. after these appear I get the BSOD and the machine restarts, but no access to the 5 ghz band. I've looked for new Intel network adapter drivers, but the have the latest. How can I get the 5 ghz band going on this laptop?

See if the manufacturer of the pc has a forum and post the question there. Try to include info about the laptop model and wifi adapter number. Sounds like a driver problem though.

Similar Messages

Problem with MSI Board and MSI Geforce 4 with Windows XP

I have a MSI 845E Max(MS-6566E)
MSI Geforce 4 - 420
Celeron 1.7 gig
Soundblaster Live
2 Network Cards
and the usual stuff.
I have loaded Windows 98 on my system and it works fine. But then I load Windows XP on and the system starts rebooting. After it reboots my video resets itself and I have to load it back in. I will then reboot and sometimes it will work, sometimes it will not. I try playing a game or even searching the net for awhile, but out of the blue the system will give a very quick blue screen and reboot. And of course when it boots up the video is reset. I loaded all the drivers I could find on MSI's website and used every video driver made by Nvidia and MSI. If I do a Windows XP update to my system the computer will not even boot up. it will just keep rebooting when it is trying to bring up the login screen. Anyone else run into this with Windows XP?

My system sometime freezes. Why ???
P4 1.8A GHz Notrtwood, 256MB PC2700, MSI Geforce 4 TI4400, SB Live 1024
Check my logs:
1)
// Watchdog Event Log File
LogType: Watchdog
Created: 2002-07-23 20:03:27
TimeZone: -60 - Central Europe Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 108
Shutdown: 0
EventFlag: 1
EventCount: 1
BreakCount: 1
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
DeviceClass: Display
DeviceDescription: NVIDIA GeForce4 Ti 4400
HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0BD6 0006000D 000A0BD6 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
DriverFileVersion: 6.13.10.3030
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
DriverProductVersion: 6.13.10.3030
2)
// Watchdog Event Log File
LogType: Watchdog
Created: 2002-08-12 18:53:23
TimeZone: -60 - Central Europe Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 235
Shutdown: 0
EventCount: 8
BreakCount: 8
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: NVIDIA GeForce4 Ti 4400
HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C0A 0006000D 000A0C0A 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
DriverFileVersion: 6.13.10.3082
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
DriverProductVersion: 6.13.10.3082
3)
// Watchdog Event Log File
LogType: Watchdog
Created: 2002-09-07 22:22:41
TimeZone: -60 - Central Europe Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 408
Shutdown: 0
EventCount: 14
BreakCount: 14
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: NVIDIA GeForce4 Ti 4400
HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0FC9 0006000D 000A0FC9 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
DriverFileVersion: 6.13.10.4041
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (C) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
DriverProductVersion: 6.13.10.4041

How do i get a scanjet 5200c to work with windows 7?

I have a Scanjet 5200c that worked well with Windows XP. When I went to Windows 7, it stopped working. HP support said they did not support this machine with a driver for Windows 7. Why not? How can I get this perfectly good scanner up and running again?

BSLund, welcome to the forum.
I do not work for HP, but I have experience with driver development. Once printers/scanners get older, it becomes too difficult to continue updating the driver. There are newer printer/scanners that have to be supported. Drivers are difficult to develop and maintain. It is not as simple as going to the code and changing the model or OS version.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Protools 8 compatiblity with Windows Vista and which proper audio interface?

O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

Hi again chamille2010,
Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit. I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve. That was also on the XP Operating System so you might be better off with Vista SP1. I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results. USB would definitely be slower and might be a cause for latency if you run into it.
That's my opinion. Digidesign has a pretty in-depth site for making sure your system will run Pro Tools. I'm sure you've already checked it out but just in case:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=23954

No wifi connections with Windows 8.1 on Lenovo Flex 2-14

I got me a new Lenovo Flex 2-14 with Windows 8.1 on it yesterday, but I can't connect to my wifi network. In the tray there's always the red cross (not the yellow symbol) and no network is found at all.
I read that a lot of users experience this, so I tried multiple drivers but none of them works. I tried the one pre-installed on the D drive, the newest one from the Lenovo website and also some that I found via Google when I searched for my wifi-adapter (it's a Realtek RTL8723BE). But as I said, no driver works.
Does anybody have an idea what I could do? It's a completely new notebook, so I didn't change any settings.
Thank you!
Solved!
Go to Solution.

Actually I have no idea what wireless adapter I have, on the Lenovo page both drivers are listed. When I install the Realtek driver I at least see an entry in the Device Manager, whereas when I install the Intel driver nothing happens at all. I deinstalled the Intel Tools and reinstalled the Realtek driver afterwards, but nothing changed.
In my router's settings I can only choose between channels 1 to 13, as far as I know these are at 2.4 GHz, right?

Can Mac OS 8.6 be made compatible with Windows?

I have one of the first iMacs (8/98) that was originally OS 8.0. It's been upgraded to 8.6 with 64mgs RAM.
I'm starting my own business and need to be able to access MS Window-built sites that have "Audio" icons that, currently, don't work for me. I installed Windows Media Player 7, and sometimes it actually works.
Any suggestions on how to make my old computer more compatible with Window's applications?

In this case, your problem is not Mac and Windows compatibility. It's the old technology (your Mac OS 8.6 software) that won't play the media created by the newer technology (whatever you're finding on your website).
Keep in mind that computers are not appliances. A toaster, for example, has a specific function and will always do that function until its hardware falls apart (my parents had one for 15 years). But a computer's functions can be altered over the years by upgrading and updating the operating system and application software.
In your case, you have old hardware too. You can do a few of things.
1. Your hardware will easily support upgrading your operating system to Mac OS 9. This OS is old too and no longer made, but you can find it second-hand online (Amazon.com) for about $35-$40. Then you can download the latest versions of Windows Media Player and Real Player for Mac OS 9.
2. You can buy a new (brand new or a couple of years old) Mac laptop, which will be compatible with just about everything you'd like. It will also be compatible with future software updates and upgrades for a few years to come.
3. You can buy a new (brand new or a couple of years old) Windows computer to ensure 100% compatibility with other Windows computers.
The bottom line is that you just need something newer. I suggest looking into the Mac OS 9 upgrade first. It's the cheapest potential fix for you. But it's not a guarantee.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.5)

Appcrash with multitrack sessions in Audition CS6 on a MacBook Pro with Windows 7

This is an issue with multitrack sessions different from 44100 Hz in Audition CS6 (as part of a Premium Suite CS6). While multitrack sessions with a sampling rate of 44100 Hz works normally (as long as I use clips with 44100 Hz) any other sampling rate causes an APPCRASH (s. below). Also with the insertion ( in a 44100 Hz multitrack session, of course) of any clip with a sampling rate different from 44100 Hz, the programme crashes in the moment it's going to generate a adapted copy for the multitrack timeline.
Audition is installed on a MacBook Pro Retina 15" ,Mid 2014, Model 11,3, Intel Core i7 4870HQ 2,5 GHz, 16GB RAM with Windows 7 SP1.
I tried all advices of the Adobe troubleshooting site and some of the community.
Especially:
- the simplified mode with user-defined system start
- deactivated user account control
- new user account
- deactivated data execution prevention (DEP)
Also the use of different audio interfaces affords no effect:
- build in Cirrus Logic CS4208 with MME drivers
- Motu UltraLight mk3 hybrid via USB with Asio drivers.
In spite of an extensive search I can't find any similar case in the net.
So, please, can you help me?
Sorry, it's a german version of windows 7:
Problem signature
Problemereignisname:    APPCRASH
Anwendungsname:   Adobe Audition CS6.exe
Anwendungsversion:    5.0.2.7
Anwendungszeitstempel:           505806ee
Fehlermodulname:    StackHash_0a9e
Fehlermodulversion: 0.0.0.0
Fehlermodulzeitstempel:           00000000
Ausnahmecode:        c0000005
Ausnahmeoffset:       45ef2b00
Betriebsystemversion: 6.1.7601.2.1.0.256.48
Gebietsschema-ID:   1031
Zusatzinformation 1:    0a9e
Zusatzinformation 2:    0a9e372d3b4ad19135b953a78882e789
Zusatzinformation 3:    0a9e
Zusatzinformation 4:    0a9e372d3b4ad19135b953a78882e789

I'm afraid you are right. At the worst I'm more than 50% of the audition users on a mac with windows.To solve the problem within a passable time I would like to change to the mac version of audition. But unfortunately it's impossible to use the mac version with a windows licence. And CS6 licences (mac audition) are not longer available (only at a moon rate).
Because of the weekend we can pass the time with the latest news of my trouble-shooting.
The crash is not only within the multitrack session but also within the waveform view: when I try to change the sampling rate (Edit -> Convert Sample Type) the programme crashes with the same problem signature. And here it crashes with all sampling rates , including 44.1k audio files. On the other hand I can play all sampling rates within the waveform view.
I compared the logfile from the predecessor of the MacBook , a LG Notebook with windows vista and a working Au CS6 with the current logfile of the Mac: They are identical at the beginning and at the end (termination sequence). But after " Initializing AuScripting" there is a "DLMS 6.0x39 FileServer startup code: 0" and the listing of a couple of codecs in the Notebook logfile - but not so in the Mac logfile.
Also the logfile of my workstation with a working Au CS6 shows this "DLMS 6.0x39 FileServer startup code" - line. Because of the two working and one crashing computer this part of the logfile seems to be important ??
Logfile audition predecessor (Notebook) - detail
A blank line is only to arrange the logfile more clearly - it doesn't stand for missing lines.
Ticks = 60014      <4068> <AuLog.DisplaySurface> <5>     Initialize PRM
Ticks = 60014      <4068> <AuLog.DisplaySurface> <5>     Initialize DS
Ticks = 60076      <4068> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
Ticks = 60076      <4068> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 64304      <4068> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 86191      <3796> <AuLog.Plug-in> <5> DLMS 6.0x39 FileServer startup code: 0
Ticks = 86191      <3796> <AuLog.Plug-in> <5>     AVI Movie (*.avi)
Ticks = 86191      <3796> <AuLog.Plug-in> <5>         *.AVI
Ticks = 86191      <3796> <AuLog.Plug-in> <5>     FLV (*.flv)
Ticks = 86191      <3796> <AuLog.Plug-in> <5>         *.FLV
Logfile MacBook Pro - detail
Ticks = 3510      <3976> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 3869      <3976> <AuLog.DisplaySurface> <5>     Initialize PRM
Ticks = 3869      <3976> <AuLog.DisplaySurface> <5>     Initialize DS
Ticks = 3900      <3976> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
Ticks = 3915      <3976> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 4493      <3976> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 22948      <3976> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 22948      <3976> <AuLog.Plug-in> <5> Audition Wave Amio-Plug-In. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 45958      <3976> <AuLog.Shutdown> <5> AuUI termination sequence started...

Need documenation proffs to show that Adobe Illustrator 9.0 and 14.0 is compatible with Windows 7

This link was provided by Adobe support.
As I am unable to open this link,I am resubmiting this request.
Please refer the mentioned link highlighting system requirement for Installing Illustrator different versions:
https://help-internal.adobe.com/content/help/en/x-productkb/policy-pri cing/system-requirements-illustrator.html
Kindly send me documenation proffs to show that Adobe Illustrator 9.0 and 14.0 is compatible with Windows 7

Illustrator CS6 system requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows® XP with Service Pack 3 or Windows 7 with Service Pack 1. Adobe® Creative Suite® 5.5 and CS6 applications also support Windows 8. Refer to the CS6 FAQ for more information about Windows 8 support.*
1GB of RAM (3GB recommended) for 32 bit; 2GB of RAM (8GB recommended) for 64 bit
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit video card
DVD-ROM drive compatible with dual-layer DVDs
Some features in Adobe® Bridge rely on a DirectX 9–capable graphics card with at least 64MB of VRAM
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
* Learn more about Windows support.
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.*
2GB of RAM (8GB recommended)
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit video card
DVD-ROM drive compatible with dual-layer DVDs
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
* Learn more about Mac OS X Mountain Lion support.† This product may integrate with or allow access to certain Adobe or third-party hosted online services ("Online Services"). Online Services are available only to users 13 and older and require agreement to additional terms of use and Adobe's online privacy policy. Online Services are not available in all countries or languages, may require user registration, and may be discontinued or modified in whole or in part without notice. Additional fees or subscription charges may apply.
To the topIllustrator CS5 system requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows® XP with Service Pack 3; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1; or Windows 7
1 GB of RAM
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash-based storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card
DVD-ROM drive*
Broadband Internet connection required for online services†
Mac OS
Intel processor
Mac OS X v10.5.7 or v10.6
1 GB of RAM
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
1024 x 768 display (1280x800 recommended) with 16-bit video card
DVD-ROM drive*
Broadband Internet connection required for online services†
*This product may allow you to extend its functionality by accessing certain features that are hosted online, including CS Live online services ("Online Services"), provided you have a high-speed Internet connection. The Online Services, and some features thereof, aren't available in all countries, languages, or currencies and can be discontinued in whole or in part without notice. Use of the Online Services is governed by separate terms of use and by the Online Privacy Policy. Access to some services sometimes requires user registration. Some Online Services, including services that are initially offered at no charge, may be subject to additional fees and require a separate subscription. For more details and to review the applicable terms of use and Online Privacy Policy, visit www.adobe.com.
To the topIllustrator CS4 system requirements
Windows
2 GHz or faster processor
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
512 MB of RAM (1 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,024 x 768 display (1,280 x 800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Windows 7 compatibilityMac OS
PowerPC® G4 or G5 or Intel® processor
Mac OS X v10.4.11–10.5.4
512 MB of RAM (1 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
1,024 x 768 display (1,280 x8 00 recommended) with 16-bit video card
DVD-ROM drive
QuickTime 7 software required for multimedia features
Broadband Internet connection required for online services*
Snow Leopard compatibility*This product may allow you to access certain features that are hosted online ("online services"), provided you have a high-speed Internet connection. The online services, and some features thereof, aren't available in all countries, languages, or currencies and can be discontinued in whole or in part without notice. Use of the online services is governed by separate terms of use and by the Adobe Online Privacy Policy. Access to these services sometimes requires user registration. Some online services, including services that are initially offered at no charge, may be subject to additional fees. For more details and to review the terms of use and Online Privacy Policy, visitwww.adobe.com.
To the topIllustrator CS3 system requirements
Windows
Intel Pentium 4, Intel Centrino, Intel Xeon, or Intel Core Duo (or compatible) processor
Microsoft Windows XP with Service Pack 2 or Windows Vista Home Premium, Business, Ultimate, or Enterprise (certified for 32-bit editions)
512 MB of RAM (1 GB recommended)
2 GB of available hard-disk space (additional free space required during installation)
1,024 x 768 monitor resolution with 16-bit video card
DVD-ROM drive
QuickTime 7 software required for multimedia features
Internet or phone connection required for product activation
Broadband Internet connection required for Adobe Stock Photos* and other services
Mac OS
PowerPC G4 or G5 or multicore Intel processor
Mac OS X v10.4.810.5 (Leopard)
512 MB of RAM (1 GB recommended)
2.5 GB of available hard-disk space (additional free space required during installation)
1,024 x 768 monitor resolution with 16-bit video card
DVD-ROM drive
QuickTime 7 software required for multimedia features
Internet or phone connection required for product activation
Broadband Internet connection required for Adobe Stock Photos* and other services
*Online services, including, but not limited to, Adobe Stock Photos and Adobe Connect, may not be available in all countries, languages, and currencies. Availability of services is subject to change. Use of online services is governed by terms and conditions of a separate agreement and may be subject to additional fees.

Cannot download Acrobat Reader 9 to my new ASUS computer with Windows 7

I replaced my old "slave" XP system computer with a new ASUS Windows 7 computer. I connect the slave computer (Windows 7 OS) wirelessly through a Linksys router.with my "home" computer (XP OS) and the internet. I get the following error message when I try to install Adobe Reader: "error 1606: could not access network location %APPDATA%\. I cannot download through either Firefox or through Windows Explorer.
== This happened ==
Every time Firefox opened
== When I changed from my old XP OS "slave" computer with a new ASUS with Windows 7 OS. I also had to buy a new Linksys wireless adaptor.

No. As a matter of fact, I tried to install it using Internet Explorer 64 bit. It also would not install Acrobat 9.3My PC is an ASUS E5400, Pentium Dual-core, 2.7 GHz each, with 6.oo GB RAM and 64 bit OS.
I spent a couple of hours on-line with a Linksys troubleshooter to see if the problem was with my Linksys router or adaptor. Neither of them appear to be the problem.
I always get this error message: "error 1606 - could not access network location, %APPDATA%\"
Any suggestions?

Replace Zorin 9 OS with Windows 8.1 OS

I have an opportunity to purchase a HP TOUCHSMART 15-D069WM, 15.6" Intel [email protected] GHz, 6 GB, 500 GB for a reasonable price. However it has Zorin 9 OS. How can I replace the OS with Windows 8.1 I have the retail Windows 8.1 discs.

Hi,
Please start from step #2 of the following article:
http://windows.microsoft.com/en-AU/windows-8/clean-install
more reading:
http://www.howtogeek.com/187525/how-to-perform-a-clean-install-of-windows-8.1-with-a-windows-8-key/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

ENCORE CS5.0 CRASHES EVERYTIME WITH WINDOWS 7 - 64BITS

Hello the forum,
I am really desappointed with ENCORE CS5.0
When we used this soft in CS4 Version with WINDOWS XP on a Laptop computer, it runs slowly, but it runs.
we called the Adobe support and after a lot of discussions, they said that we need to have a better computer for these softwares (PREMIERE and WEB suite)
We bought the CS5.0 version and a new PC : (october 2010)
DELL Studio XPS 8100 - Intel Core i5 processor (3.2 Ghz - 4 Mo)
Memory 4 x 2 Go - 1333 MHz DDR3 Bicanal
DD 1.5 To Serial ATA 7200 Tr/mn
graphic card : 1 GB NVIDIA GeForce GTX 460
Windows 7 - 64 bits
with this new PC, we immediately have the problem : impossible to open it correctly, very long, and when its opens, it blocks when we try to do something.
we recontacted the Adobe Support (France) and after a lot of trials (sending files, direct manipulations on our PC), they didn't understand and say that we have to wait for CS5.5 version which must solve the problem. they will contact us as soon as the version will be available in order to obtain it with a special price, in respect of the client damage. But we have never been informed, and when we call them to know when we can have the new version, they say it's too late, no special price possible,....
so we never know if this CS5.5 solve the problem
QUESTION :
Is there somebody who had this problem and is there a solution ?
we are sure that the problem is between ENCORE and Win7 but how to solve it
hope my english is clear enough !
thanks for your help in this matter
SDF

A laptop for video editing must have a LOT of power... such as the below
Some ideas for a Laptop Video Editing PC from past discussions
http://www.sagernotebook.com/
http://forums.adobe.com/thread/957472
http://www.adkvideoediting.com/
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=637440&csid=ITD &recordsPerPage=10#
-NOTE only 1 hard drive in above, so you will need to add a 2nd drive or use eSata for video files
-or Google "ASUS G74SX-BBK7" (without the quote "" marks)
For effective HD video editing, a laptop with the following
-the newer Intel sandy bridge 2720 or 2820 quad processor
-and nvidia graphics preferably the 460m, 485m is a bit much
-1280x900 display with OpenGL 2.0-compatible graphics card
-and 8 or 16 gig ram and Win7 64bit Pro
-and 2 internal 7200 HDDs minimum
This message has a really good graphic about requirements
CS5 Requirements http://forums.adobe.com/thread/810750
About Requirements http://forums.adobe.com/thread/618058
Disk Configurations http://forums.adobe.com/thread/878419

Hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

System Requirements for AutoCAD 2013 for Mac:
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Direct3D®-capable workstation-class graphics card
3ds Max 2014 and 3ds Max Design 2014 are available for windows only:
System requirements for 3ds Max 2014 and 3ds Max Design 2014
Windows 8 or Windows® 7 64-bit Professional operating system
64-bit Intel or AMD multi core processor
4 GB RAM minimum (8 GB recommended)
4.5 GB free disk space for installation
3-button mouse
Latest version of Microsoft® Internet Explorer®, Apple® Safari®, or Mozilla® Firefox® web browser
Recommened Mac:
15-inch MacBook Pro with Retina display : 15.4-inch (diagonal) LED-backlit display with IPS technology
2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors
Hardware
2.4GHz quad-core Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
512GB Flash Storage
Autodesk AutoCAD 2014 for Windows vs AutoCAD 2013 for Mac
USER INTERACTION Windows Mac
Command line
✓
✓
Multifunctional grips
✓
✓
Dynamic input
✓
✓
Auto-complete command entry2
✓
✓
Hide and isolate objects
✓
✓
Create and select similar objects
✓
✓
Delete duplicate objects
✓
✓
Properties palette
✓
✓
Quick properties palette
✓
Quick view
✓
✓
In-canvas viewport controls
✓
✓
Editable UCS icon
✓
✓
Layer tools3
✓
✓
Layer groups
✓
✓
Layer state manager4
✓
New layer notification
✓
Filter
✓
Quick select
✓
DesignCenter
✓
Tool palettes
✓
Content palette
✓
Navigation bar
✓
ShowMotion
✓
Coverflow navigation
✓
Multi-touch gestures
✓
AutoCorrect command entry
✓
File tabs
✓
DOCUMENTATION
Geometry creation & measurement tools
✓
✓
Parametric constraints
✓
✓
Associative arrays
✓
✓
Copy array
✓
✓
Object and layer transparency
✓
✓
Strike-through text
✓
✓
Blend curves
✓
✓
Multiple hatch editing
✓
✓
Sheet set manager
✓
Project manager
✓
Dynamic blocks5
✓
✓
Model documentation tools
✓
Table style editing
✓
Hatch creation preview
✓
Multiline style creation
✓
Digitizer integration
✓
Change space
✓
Express tools6
✓
Text align
✓
DESIGN
Solid, surface, and mesh modeling
✓
✓
Surface curve extraction
✓
✓
PressPull
✓
✓
Autodesk materials library
✓
✓
Material creation, editing, and mapping
✓
Basic rendering
✓
✓
Sun properties7
✓
✓
Visual styles7
✓
✓
Advanced rendering settings
✓
Camera creation
✓
Walkthroughs, flybys, and animations
✓
Autodesk ReCap point cloud tool
✓
Import Sketchup files (SKP)
✓
Geographic location
✓
CONNECTIVITY
External references (DWG)
✓
✓
Image underlays
✓
✓
PDF underlays
✓
✓
DWF underlays
✓
DGN underlays
✓
In-place editing of DWG references
✓
✓
Batch publish
✓
✓
Publish or plot to PDF
✓
✓
Plot styles
✓
✓
Plot style table editor
✓
✓
AutoCAD WS connectivity
✓
✓
Autodesk 360 connectivity
✓
Data links
✓
Data extraction
✓
Hyperlinks
✓
Markup set manager
✓
dbConnect manager
✓
eTransmit
✓
WMF import and export
✓
FBX import and export
✓
SAT import and export
✓
✓
Additional model import
✓
Design feed
✓
Share on Facebook
✓
LICENSING
Standalone licensing
✓
✓
Network licensing
✓
✓
Cross-platform licensing
✓

I have Illustrator CS5.1 installed on a Samsung with Windows 8 not enough RAM to save

I have Illustrator CS5.1 installed on a Samsung with Windows 8 and i'm trying to save my work but it says there's not enough memory (RAM) available. Please help I really don't know what to do!... I only have this page open on Firefox and my disk has 568GB available...

Notebook Info
1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
8192 MB DDR3-RAM
Harddisk: 1000GB SATA
NVIDIA N15V-GM mit 1GB DDR3
Prefs
As per download settings, I changed nothing
Image Info
Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
I then downloaded and installed on my PC and everything works.
Regards Roland

PPro 1.5 incompatible with Windows 7

I just upgraded laptops and have been eager to continue editing with Premiere Pro 1.5. However, the program will not upload and gets stuck during the initialization process at GPUPagecurl.aex. Is version 1.5 incompatible with Windows 7 and if so, is there a fix/patch?
Laptop specs: i7 chip 8G Ram dual quad processor @1.6 Ghz 1.6 Ghz and 64bit OS

Personal aside - I feel that the min. requirements are awfully low. They are basically enough to install the program, and launch it. Trying to edit anything with a min. system will be horribly painful, if even possible.
It is good that you read of the min. system requirements. I would not attempt to go with something below those.
Now, with about Photoshop CS, Adobe finally issued a min. video card statement for PS. It was 128MB VRAM min. I still ran PS CS for a few years on a Matrox G-450 64MB video card, without issues. Now, this is VASTLY different than CPU, RAM or HDD setup.
Good luck, and thanks for reporting, even if it was not good news. That will very likely help others with the same question.
Hunt

HELP....need a good sound card that works with Windows 7 64 bit

I've searched the internet and I'm seeing that folks are struggling with getting sound cards to work with Windows 7 (particularly the 64 bit systems). I know there are stability issues with the 64 bit system but I'm looking to install a decent sound card to improve stereo sound from my HP Pavilion (h8-1260t). The onboard sound is OK, but I'm looking for higher fidelity and the shortcomings of the stock sound chip is noticeable when played through my hi fi system. Don't really need 'surround sound' (I'm not a gamer) but I'm assuming any card that comes with this feature will also produce a quality stereo signal. I also like to archive music from steaming sources and have found a significant loss of sound quality once the track is saved. I'm assuming a good sound card will help with this. Any advice would be greatly appreciated.

Spauld, welcome to the forum.
I suggest finding a sound card that you like and contacting the manufacturer's Customer Service to assure its compatibility with Win7 64-bit. They are the experts on their products. While I am not a fan of dedicated sound cards because their drivers are conflict prone, I would buy a Creative Soundblaster. They have been proven over time.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

5 ghz with Windows 8.1

Similar Messages

Maybe you are looking for