£5 reward for helping
Hi, since I'm running out of time pretty rapidly I'm offering a £5 reward (paid via paypal) to the first person who can complete my program as per my previous thread today http://forums.ni.com/ni/board/message?board.id=170&thread.id=400477
So is anyone interested in spending a few minutes helping out and making some pocket money?
Cheers all,
Iain
Thats fair enough, and I respect your position on this. It was perhaps pretty optimistic on my part, oh well. I'm certainly not adverse to a getting stuck into some hard work and learning things myself, but i'm writing this program for our formula student team to allow us to obtain data about our car which several people need to include in their projects. We're now down to about 3 weeks to get the system up and running, and then get it fitted to the car to actually obtain data while testing (through no fault of our own, we only just received the hardware we needed). People have been very good at providing hints in the other thread so I might yet find the time to get this running and get on with the other program I'm writing, the one which actually formats and makes sense of any data we gather. I'm expecting that one to be quite a job!
Oh and regarding the examples you speak of, I've been using them to get my program this far, so its not a case of not being bothered.
Similar Messages
-
Reward for helping me out. Issue with Lenovo computers and musical equipment.
I know this may seem a wierd place to put this post, but as this looks like a conflict between hardware or drivers, I think it is possible that I can get better help from computer-Techs then Music-Techs.
Help me out before I grow bald and decapitate my self in agony.
I have used the last couple of months to build a setup to sooth my needs for using Native Instruments Traktor Pro 2.03
After hours of research I came up with a solution that says:
Computer: Lenovo T500 2.8Ghz with 4GB ram
Midi controllers: Numark Mixtrack Pro, Evolution UC-33e and Novation Launchpad
Softeware: Traktor Pro 2.03 and Midikatapult
All worked like a charm until I connected the Launchpad.
As it goes, it looks like the Launchpad and the T500 is a match made in HELL.
Whenever the Launchpad gets involved in any kind of midifeedback from Traktor or Midikatapult (for lighting up the LEDs), my computer totally freezes.
The freezes happens most of the time within a blink of an eye, and other times within half a seccond. Only options is to hard reset the computer in order to get out.
I have narrowed the issue to be some conflict between Lenovo and Launchpad.
Tried the setup on my wifes T400, with the same problem but when I hook it to my old HP it works fine (except for the HP being to slow to cope with it on a live playing basis).
Other people have the launchpad working fine on PC's with win7 pro 64bit just like me so it doesn't look like a win7 issue.
If I disable LED feedback, the setup works fine, but then I can't use midikatapult as it F&#$s my setup when I start up midikatapult. Seccondly it would be allmost impossible for me to navigate around a 80 button controller like the Launchpad without LED feedback.
I am in really pinned to the floor about having to buy another computer to get this working as the T500 sooths me perfect in all other aspects, so I am desperatly looking for a solution that doesn't envolve switching equipment or otherwise ruining me.
If you can give a usefull insight that solves this issue for me I will happily pay you 50$ for the trouble.
I really hope someone can help me out, and I know that I'm not the only one agonizing about this issue.
Best Regards Jeppe JohansdenI don't know anything about the MIDI products you're using so all I can do is give you some genreal tips, but hey, it might help.
First question - are these products all USB-based?
Second question - have you tried using an external POWERED USB-hub?
Third question - does it do the same regardless of which USB port you're plugged into? Some hardware seem to prefer certain ports to others.
Get back to me - will try to help. -
GetResourceAsStream not working ($50 reward for help)
Hi,
I can't get getResourceAsStream to work for reading text-file in Sun's studio mobility. when trying to compile the class I get message "Errors during compiling Qgui".
I have (by commenting out code) confirmed that the message is caused by the line reading "InputStream is = getResourceAsStream("textfile.txt");".
If someone can help me out on this, I will pay him/her $50 (via Paypal?) for pure joy of getting my prototype finally ready. Heck, I can pay something even if the advice is "get rid of studio mobility and use X instead", if X works better and instructions are clear..
Cheers,
MikkoSpecifying my own message:
- Mobility Studio is version 6 2004Q3
- I have made jar-recipe (file->new->JAR Recipe), but am not sure if it has everything there should be (used "Generate" from the wizard)
- the line causing the trouble is "InputStream is = Qgui.class.getResourceAsStream("textfile.txt"); " ("Qgui" being the name of the current class; sorry for incorrectness in original message)
- I could not get this.class.getResourceAsStream to be accepted (which is another form of using getResourceAsStream I have seen in examples I found from net); it causes "identifier expected"
While I have some experience coding Java, I do not know much about jar-files or possible properties that should be somehow somewhere set. And it seems that basic what-to-do-for-beginners documentation beyond short tutorial for mobility studio is hard to find.
Cheers,
Mikko -
$10 Rewards for Destiny pre-order and $10 Bestbuy Giftcard with Evil Within pre-order
I have yet to receive either of these. I understand my Destiny purchase still says pending (although I received my $10 rewards for Madden 15 within a week of me picking up purchase). When should I receive the $10 rewards certificate?
Also, I pre-ordered Evil Within months ago and I see now that anyone that pre-orders get a $10 giftcard. Shouldn't I still get this?
If anyone can help and correct this, it would be greatly appreciated. My member # - (removed per forum guidelines)
Thanks!
BrandonNot a problem!
Whenever a BestBuy.com order is cancelled (or returned), any funds held for that order are automatically refunded to the original form of payment. This process typically takes 2-3 business days for gift cards, while reward certificates are applied back to your My Best Buy account in the same length of time. For debit and credit cards, the exact timeframe required before the funds are available again is dependent on the card's issuing bank.
If you no longer have the original gift card, then we can issue a replacement with the remaining balance. To request a replacement, simply give our gift card support team a call at 1-888-716-7994 or leave us a message in the BestBuy.com board. Additional info on gift cards can also be found here:
BestBuy.com > Help Center > Gift Cards
http://bbyurl.us/GiftCards
I hope this helps.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message -
Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.
jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby? -
Hello,
I am looking for ideas/help. I currently have a BB Z10 (10.1.0.2039) with Verizon Wireless. The company has a BB Enterprise Server for older devices (I previously was on that). I bought a Z10 several months ago and have been connecting to the corporate network through Lotus Traveler. They do not have and will not implement a BB 10 Enterprise Server. Some in IT informed that if the company used the BB software they could manage all devices..... not accepted.
All my contacts, calendar, and company email is funneled to the BB Hub.....
So my company is implementing a Mobile Asset Management Service that I have to sign up for (Airwatch?). They only support Android and IPhone.
Will future versions of the BB OS support Android Apps.... Soon (I have less than 2 weeks)
I have read where it is possible to put the device in development mode to run Android Apps. I don't know if that will work with this and have no idea how stable the phone is in that mode. I travel internationally so I don't know how a development mode would work overseas. Any thoughts?
I like my Z10 but will need to switch to keep functionality if I can't find a work around
Any assistance ????
Thanks for any help.Hi and Welcome to the Community!
BB10 devices have the ability to run .apk apps via special methods. Development Mode is used only for installing the app...not for normal operation. So you install (side-load) the app in Development Mode, then go back to normal mode for normal operations.
If a .bar file for the .apk app already exists somewhere, you can side load it to the BB10 device and see if it works or not. If there is not yet any .bar file, there is an app called SideSwype that can convert many .apk apps to .bar and install it to your device.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Looking for Help with Hyperion to JAVA
I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846
Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support -
Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
ThanksHi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support -
Hello to all ... looking for help with 7520
Hey I got a 7520 and want to know how I can get my computer to sync ?? or recognize my phone so I can load Pictures from the computer to the phone.
Hey BigSteve!
Here is a write up that should help you:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Trying to get a computer repaired, getting the run around - a plea for help
First, some backstory:
I ordered a refurbished ThinkPad T440s from the Outlet on July 21 after two weeks of fighting with the bots and snipers. It was a nice machine: it had an i7 4600 processor and a FHD IPS display. The outlet shipped my computer quickly and I was happy to receive it. I opened it up and... it was the wrong computer altogether.
I contacted a CS representative and she told me that the only option was to send the unit back for a refund and try again. Apparently there is no inventory system in place to tell me if the computer I originally ordered was even available, or if it had been sent to a different customer. Begrudgingly, I sent the original laptop back and received my refund.
I decided to try again, and successfully managed to snag another machine with similar specs on July 29 after camping out on the Outlet site. I was overjoyed, but this order has turned out to be a nightmare.
After the status of my order sat on "Released to Manufacturing" for two weeks, I contacted bgriffin2 on these same forums. After giving him my order information, my laptop shipped on the same day, August 12. I was delighted.
When the computer arrived, I opened it up and I was pleased to see that it was the correct machine. However, the laptop had severe scratching all over the rear LCD cover, as if someone had taken their car keys and dug grooves in the lid. The edges of the computer were severely worn, and on one corner it looked like the pc had experienced a pretty nasty fall. To make a long story short, the laptop did not look reconditioned at all. It also had not been function tested, as there were numerous problems with the machine besides the cosmetics. The fingerprint reader did not work and was not even recognized by the BIOS, the speakers made loud popping noises intermittently, and the external battery was not even recognized by the machine. I still do not know if this was a battery issue, or if there is something wrong with the motherboard of the machine.
I used to work at a facility that refurbished handsets for Verizon Wireless. I will tell you up front that this sort of shoddy reworking and QC testing would never fly there. This unit should have never left the facility as a scratch & dent, much less as a refurbished and remanufactured unit.
Do you think that's the end of my sob story? Oh no, we're just getting started. Bgriffin2 acknowledged that this was unacceptable and he suggested I send it in for warranty service to have these issues resolved. I spoke to a very nice woman at the Atlanta service center and she was very helpful in getting me a prepaid carton to send the laptop to Memphis for repair. I sent the laptop off and it was deliviered to Lenovo on the 19th of August. Since then, the status of my repair on the EasyServ website has looked like this:
http://i.imgur.com/t3Qs03e.png
Each and every time I see "Hold for customer information," I place a phone call to the tech support line and ask what they need from me. The first two times I was redirected to the actual people doing the repair, as the representatives that answer the phone couldn't seem to discern what is going on with the repair. Both times, I was told that they didn't need anything from me, that there was a glitch in the system and the hold was accidentally placed. I was told that the hold was removed and that they would begin repairing my laptop immediately. I was content with that answer until I received a phone call last Thursday from someone from billing. This gentleman said that Lenovo wanted $300 to fix the scratched rear LCD cover as it was not covered by warranty. I was stunned. These people had my laptop for two weeks before tellling me that they wanted money from me. I was appalled and told him that there was no way that I was going to pay for it. I had to tell him twice that the unit was not a scratch and dent model, it was a refurbished model. The scratching on the lid is not minor, and the machine does not work as it is supposed to. He said that he would see if he could get the price reduced for me; I said absolutely not. He said that he would see if they would fix it for free out of the goodness of their hearts, and I said fine, do what you can. He promised to call me back and tell me about his findings; I have not heard from him again.
Upset by the previous phone call, I immediately called the tech support number again. A representative named Arva tells me that she sees that I am to receive a new laptop. Confused, I tell her that I had one sent in for repairs. She puts me on hold for a little while and comes back saying that the computer was damaged beyond Lenovo's acceptable specifications and that they were going to send me a newly refurbished laptop with the same specifications, and that I should expect a phone call within the next 24-48 business hours. Of course, that was on Thursday. I did not receive a call on Friday, and it was Labor Day weekend, so no calls then. I also did not receive a phone call yesterday, but I noticed a new "Hold for customer information" popped up.
I called again today to find out what they needed from me. This time the tech support representative tells me that the battery won't hold a charge, and that's the reason for the hold. Now tell me, why on earth would they not have another battery laying around to test with? She tells me that there is no ETA, but I requested a phone call from someone who knows what's going on, and also an escalation of some type. Notice that she did not mention a newly refurbished laptop as Arva had promised. These people can't even keep their story straight.
I am crying out for help here. I am a grad student in CS and I absolutely NEED a computer. I have a desktop at school, but it is not portable and I need a laptop. Please, can someone get something done about this?
My case number is A07YFM9.Hi massmercury,
I want to apologize for your experience here with the service center. I am moving forward to have your case escalated for further review. Please see my private message. I will be your point of contact until our Customer Advocate team reaches out to you.
Best regards,
Bgriffin2
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
How do you get of hold of anyone at Adobe for help? Cannot download Photoshop CC.
I could not update Photoshop CC from Creative Cloud desktop or online. I need Raw 8.3 to be compatible with Lightroom. It is impossible to get a hold of anyone at Adobe for help. Found their chat link once after much searching, someone finally answered then told me they were closing for the day and to call back the next day. Could never find the chat link again. Tried uninstalling PhotoshopCC because I saw that somewhere in the forum but still cannot download Photoshop CC. Got error code U43M1U49 and said to retry or contact customer support. Yeah right! Totally frustrated with Adobe. Anyone have any suggestions?
Triste wrote:
I update application manager and was able to load Adobe Premier CC from on
line upload center. When I tried to update more apps from the desktop CC,
still failed. Tried to update Adobe Premier CC from help, mostly worked,
but got an message to close LogTransportApplication which I could not find,
did not show in my Task Manager when tried to find it, so could not update
Premier CC. Updates still failed from desktop Adobe CC.
Hi Triste,
If you're having difficulties getting updates for your tools using the Creative Cloud Desktop app, then you can try downloading them without it by using the direct links for the CC updates on Windows or on Mac OS, for all CC apps. -
A Request for help from me again! Yay!
hi guys! I was working on implementing threads for the directions of the unit. When i press forward once...nothing happens, but when i press twice it gives me this HUGE list of errors. I dont have a clue. Again, any help would be appreciated.
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class NBoard extends JFrame implements KeyListener{
int selection = 0;
boolean selectionmade = false;
final int WIDTH = 600;
final int HEIGHT = 600;
Image Viz =Toolkit.getDefaultToolkit().getImage(JOptionPane.showInputDialog("What character do you want?")+".gif");
int XC = 50;
int YC = 50;
Thread moving = new Move();
Unit Host = new Unit();
public NBoard(){
this.setSize(WIDTH,HEIGHT);
selection = Integer.parseInt(JOptionPane.showInputDialog("What level design do you want?"));
if(selection > 0){
selectionmade = true;
addKeyListener(this);
this.setVisible(true);
public static void main(String args[]){
new NBoard();
public void paint(Graphics g){
if(selectionmade == true){
if(selection == 1){
g.setColor(Color.white);
g.fillRect(0,0,WIDTH,HEIGHT);
g.setColor(Color.black);
g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
if(selection == 2){
g.setColor(Color.white);
g.fillRect(0,0,WIDTH,HEIGHT);
g.setColor(Color.black);
g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
for(int ctr = 1; ctr < 6; ++ctr){
g.drawRect(WIDTH/4 ,ctr * 100, 20, 20);
g.drawRect((WIDTH / 3) * 2 ,ctr * 100, 20, 20);
if(selection == 3){
g.setColor(Color.white);
g.fillRect(0,0,WIDTH,HEIGHT);
g.setColor(Color.black);
g.drawLine((WIDTH/2) - 90,0,(WIDTH/2) + 90,HEIGHT);
g.drawImage(Viz,XC,YC,this);
public void keyPressed(KeyEvent e){ //The Problem Areas
if(e.getKeyChar() == 'w'){
moving.start(); //Starting the thread to move up
else if(e.getKeyChar() == 's'){
YC = YC + 2;
else if(e.getKeyChar() == 'a'){
XC = XC - 2;
else if(e.getKeyChar() == 'd'){
XC = XC + 2;
System.out.println(e.getKeyChar());
repaint();
public void keyReleased(KeyEvent e){ //The Problem Areas
if(e.getKeyChar() == 'w'){
moving.interrupt(); //Trying to interrupt the thread once the key is released
public void keyTyped(KeyEvent e){}
class Move extends Thread{ //The Problem Areas
public void run(){ //The Thread
Unit.XC = Unit.XC - 2;
try{
Thread.sleep(1000);
catch (Exception e){}
class Unit{ //The Object which will hold all of the information about each unit
static int XC = 30;
static int YC = 30;
} By the way, here is my order of events, so you can look forward to seeing requests for help for them (hopefully not).
Threads: Moving the guy around
Threads: Making him shoot a ball at the mouses position
Network: Allow others to join/play game (This is gonna be HUGE probably), while host decides on game type.
Thanks for all the help so far!Where does moving ever get started? Why does Move extend Thread instead of implementing Runnable? (Implementing runnable is preferred and often the correct way to do it and it is in this case)
But regardless there shoud be a moving.start() somewhere or start of the Thread that has the Runnable target Move.... I don't think I see one. Unless I missed it.
so...itll work if i change the setup to Runnable? -
Hi, this is really a cry for help in the vain hope there is somebody at bt who cares about my broadband issue. Returned from holiday to find dsl light off on modem, did all the resets / power cycles but initially told a week ago it was an issue in my area and would return next day, then told it was a fault on line, then told it was a fault at exchange, now told its an issue in my area. Saw a Open Reach guy in my road, he said its rubbish and there is signal in the cabinet. Just spent half an hour on hold to level 2 support but they put phone down on me REALLY FED UP!!!
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
A tiny little cry for help: mic in bootcamp makes me sound like a mouse!
I posted this on the InsanelyMac forum, and I thought I'd post it here too because I'm just that desperate for help... thanks in advance for reading.
I run a MacBook Pro Core 2 Duo. When Snow Leopard came out I installed it and partitioned my drive to allow me to run Windows via bootcamp for the purpose of playing Aion with my husband.
The game works fine, although it only works correctly when I'm hooked to my large Dell monitor. The built-in display makes the mouse/cursor not function correctly in-game.
But that's relatively minor... the biggest problem is that the built-in mic, as well as any mic I plug into the Line In, makes me sound like a mouse when I speak. I SO don't want to be known as the squeaky mouse over ventrilo. (The problem occurs in a regular sound recorder too, so it is NOT ventrilo specific).
The audio device is listed as Intel High Definition Audio: Device ID 0x83847680, Audio ID 30 - whatever that means.
When I dive into the Control Panel audio preferences when booted into Windows, the driver is listed as IDT audio.
Audio output seems to function perfectly.
I would sure appreciate help if anyone has expertise or experience with this sort of thing. I'm at a little bit of a loss.
TIA,
JenHey, I had a thought, I don't know if it'll work and won't get the chance to find out until later tonight if I'm not too tired or until later tomorrow.
I think that if the IDT drivers aren't installed in the first place, perhaps the issue can be averted entirely. However, it's going to take a bit of knowledge to do and some patience. The partition will need to be remade entirely so that one may end up with a fresh operating system. When the SL disk is put into the computer, instead of running the full driver setup, pick the drivers directly off the disk by exploring its folders and only install the ones you need. Instead of using the IDT drivers, I believe the SL disk also has Realtek HD audio drivers (if I remember correctly from the last time I looked). My thought is that this manual method can prevent having to deal with the IDT drivers which I believe are part of the issue.
I understand that reinstalling XP is a process in itself, but this is the only solution I can think of. If manually installing doesnt work, my next move would be to use the drivers that come off the Leopard disk instead of the SL disk.
Like I said, this is just a thought I have so when I get to it later I'll let you know how it goes unless you decide to give it a try before me. -
[Request For Help] How To Send Email Midlet Using Secure Socket ?
Hello, this is the first time i ask for help to forum.sun.com.
i try to make secure connection for send email from MIDlet. Maybe you can check to my code :
EmailMidlet.java
import javax.microedition.midlet.MIDlet;
import javax.microedition.midlet.MIDletStateChangeException;
import javax.microedition.lcdui.;
public class EmailMidlet extends MIDlet implements CommandListener{
Display display = null;
// email form fields
TextField toField = null;
TextField subjectField = null;
TextField msgField = null;
Form form;
static final Command sendCommand = new Command("send", Command.OK, 2);
static final Command clearCommand = new Command("clear", Command.STOP, 3);
String to;
String subject;
String msg;
public EmailMidlet() {
display = Display.getDisplay(this);
form = new Form("Compose Message");
toField = new TextField("To:", "", 50, TextField.EMAILADDR);
subjectField = new TextField("Subject:", "", 15, TextField.ANY);
msgField = new TextField("MsgBody:", "", 90, TextField.ANY);
public void startApp() throws MIDletStateChangeException {
form.append(toField);
form.append(subjectField);
form.append(msgField);
form.addCommand(clearCommand);
form.addCommand(sendCommand);
form.setCommandListener(this);
display.setCurrent(form);
public void pauseApp() {
public void destroyApp(boolean unconditional) {
notifyDestroyed();
public void commandAction(Command c, Displayable d) {
String label = c.getLabel();
if(label.equals("clear")) {
destroyApp(true);
} else if (label.equals("send")) {
to = toField.getString();
subject = subjectField.getString();
msg = msgField.getString();
EmailClient client = new EmailClient(this,"[email protected]", to, subject, msg);
client.start();
}and EmailClient.java
import javax.microedition.io.;
import javax.microedition.lcdui.;
import java.io.;
import java.util.Date;
public class EmailClient implements Runnable {
private EmailMidlet parent;
private Display display;
private Form f;
private StringItem si;
private SecureConnection sc; //SSL
private InputStream is;
private OutputStream os;
private String smtpServerAddress = "smtp.gmail.com"; //SSL
String from;
String to;
String subject;
String msg;
public EmailClient(EmailMidlet m, String from, String to, String subject, String msg) {
parent = m;
this.from = from;
this.to = to;
this.subject = subject;
this.msg = msg;
display = Display.getDisplay(parent);
f = new Form("Email Client");
si = new StringItem("Response:" , " ");
f.append(si);
display.setCurrent(f);
public void start() {
Thread t = new Thread(this);
t.start();
public void run() {
try {
//SSL
sc = (SecureConnection)
Connector.open("ssl://"smtpServerAddress":465"); //smtp with SSL port 465
sc.setSocketOption(SocketConnection.LINGER, 5);
is = sc.openInputStream();
os = sc.openOutputStream();
os.write(("HELO there" "\r\n").getBytes());
os.write(("EHLO" "\r\n").getBytes());
os.write(("auth login" "\r\n").getBytes());
os.write(("dHVnYXNha2hpci50cmlhZGl0eWFAZ21haWwuY29t" "\r\n").getBytes());
os.write(("dGEuZW1haWxjbGllbnQ=" "\r\n").getBytes());
os.write(("MAIL FROM:<">\r\n").getBytes());
os.write(("RCPT TO:<">\r\n").getBytes());
os.write("DATA\r\n".getBytes());
// stamp the msg with date
os.write(("Date: " new Date() "\r\n").getBytes());
os.write(("From: "+from"\r\n").getBytes());
os.write(("To: "to"\r\n").getBytes());
os.write(("Subject: "subject"\r\n").getBytes());
os.write((msg+"\r\n").getBytes()); // message body
os.write(".\r\n".getBytes());
os.write("QUIT\r\n".getBytes());
StringBuffer sb = new StringBuffer();
int ch = 0;
while((ch = is.read()) != -1) {
sb.append((char) ch);
si.setText("SMTP server response - " + sb.toString());
} catch(IOException e) {
e.printStackTrace();
Alert a = new Alert
("TimeClient", "Cannot connect to SMTP server. Ping the server to make sure it is running...", null, AlertType.ERROR);
a.setTimeout(Alert.FOREVER);
display.setCurrent(a);
} finally {
try {
if(is != null) {
is.close();
if(os != null) {
os.close();
if(sc != null) {
sc.close();
} catch(IOException e) {
e.printStackTrace();
public void commandAction(Command c, Displayable s) {
if (c == Alert.DISMISS_COMMAND) {
parent.notifyDestroyed();
parent.destroyApp(true);
} When I try to debug project from netbeans, i found this error :
Starting emulator in debug server mode on port 2668
Connecting to 127.0.0.1 on port 2800
nbdebug:
Waiting for debugger on port 2668
Waiting for KVM...
Running with storage root temp.SonyEricsson_JP8_128x160_Emu10
KdpDebugTask connecting to debugger 1 ..
Running with locale: Indonesian_Indonesia.1252
Connected to KVM
Connection received.
Attached JPDA debugger to localhost:2668
java.io.IOException: error 10054 during TCP read +
at com.sun.midp.io.j2me.socket.Protocol.nonBufferedRead(Protocol.java:299)+
at com.sun.midp.io.BufferedConnectionAdapter.readBytes(BufferedConnectionAdapter.java:99)+
at com.sun.midp.io.BaseInputStream.read(ConnectionBaseAdapter.java:582)+
at com.sun.midp.ssl.Record.rdRec(+41)+
at com.sun.midp.ssl.Record.rdRec(+5)+
at com.sun.midp.ssl.In.refill(+18)+
at com.sun.midp.ssl.In.read(+29)+
at EmailClient.run(EmailClient.java:74)+
Execution completed.
5145824 bytecodes executed
9258 thread switches
1762 classes in the system (including system classes)
0 dynamic objects allocated (0 bytes)
0 garbage collections (0 bytes collected)
debug:
BUILD SUCCESSFUL (total time: 4 minutes 34 seconds)
Regard
LittlebroDon't multipost and don't use the browser's back button to edit your posts as that creates multiple postings. I've removed the other thread you started with the same questio.
Also, don't post to long dead threads. I've blocked your post and locked the thread you resurrected.
db
Maybe you are looking for
-
I had an old mac book from 2005.... i now have a powerbook g4.... i had archived several mailboxes from the old machine / when i try to open them on the new machine it wont let me.... any help would be appreciated - i need to search the archived mail
-
In SRM a central contract was created and then distributed to SAP ERP ECC 6.0 Backend. In backend system a release strategy exists for the distributed contract. When trying to release this contract with ME35K the contract will not be found. Checking
-
Some basic(perhaps) SQL help please
TABLE: LOGOS ID VARCHAR2(40) PRIMARY KEY TITLE VARCHAR2(100) FILE_NAME VARCHAR2(100) RESOLUTION NUMBER(3) FILE_TYPE VARCHAR2(5) DATA: ID TITLE FILE_NAME RESOLUTION FILE_TYPE 1001 pic1 horizon_main.
-
Outlook reloads every time I try to write an email
Safari web content quit unexpectedly Process: com.apple.WebKit.WebContent [1183] Path: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com.apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebCo
-
Hello folks, When opening a new file in dreamweaver the tab looks like "index.php" or whatever the file is called. But I'm working with a MVC construction and I happen to use the following folder structure. controllers/main.php views/main.php models/