5 second delay when double-clicking a track.....?

Hello, my library has grown to over 90,000 tracks. It is spread over 2 hard drives. iTunes does not appear to have a limit of tracks , but I am trying to determine if I should invest in a dual core processor and cast off my AMD 3200+ single-core. I run 2gb of ram, so I don't think memory is the problem. Is iTunes the problem? We all multi-task most of the time when playing iTunes,yes?
thanks, jeff
Self Built Windows XP Pro 1.7TB, 2GB, RAM, 939 AMD 3200+

Hey Jeff. Unfortunately I don't have an answer for you, but I have the same problem. I've only about 3000 songs and this just started for me. Four seconds when launching any song. It's also any video file for me. There's nothinh wrong with either of my hard drives and I can't figure it out. My Specs:
P4 3GHz
Intel d865gbf mobo
1gb dual channel ddr400 pc3200 kingston (2x512)
200GB SATA Diamondmax 16MB Buffer
160GB IDE WD 8MB Buffer
Please, for the love of everything, help. You have NO idea how bothersome this is.

Similar Messages

RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

Hi, all,
Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
Any advice you could give would be welcome.

Hi there
Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Photos in my iPhoto library will not enlarge when double clicked on. they fill the screen and then screen goes black. hasn't happened before. thanks--

photos in my iPhoto library will not enlarge when double clicked on. they fill the screen for a second (or less) and then screen goes black. hasn't happened before. thanks--

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Audio and video don't open together in viewer when double clicked

Hello everyone!
I'm having an annoying problem... it isn't something terribly important, but has decreased my work flow speed. Recently, I've had some trouble opening clips from the timeline in the viewer with the double click.
If I double click the video portion of the clip, even if both the video and two audio tracks are highlighted (and are still linked) only the video portion of the clip will appear (along with "filters" and "motion" tabs) in the viewer, and similarly when double clicking the audio tracks, though both video and audio are highlighted, only the audio tracks and "Filters" tab show up in the viewer. Additionally, once the item is double clicked at the left with the jigsaw pieces that can be used to set video and audio destinations, if I've clicked on an audio portion so only audio shows up in the viewer, only the jigsaw pieces for the two audio tracks (a1, a2) are visible, video track (v1) is no longer present, and vice versa.
I'd appreciate any advice that you all have! It's really driving me batty, in addition to not knowing what I did to make it that way, I can't figure out how to change it back!
Heather

Thanks for the advice.
The clips already appeared to be linked, and the selection "link" was checked, however when I unlinked and then relinked I found that the audio and video would open up at the same time in the viewer... problem apparently solved! However, the clips I had been working with I had to nudge audio and video a few frames apart (out of sync) to get the audio and video to line up. (gives the little red box with a +or- number in it on the clip).
When I unlinked and then relinked, the clip lost those red boxes and went back to being synced (as far as FCP is concerned) with the audio and video unaligned.
So, the problem appears to be coming from when I move the audio and video of a clip out of sync... why is this? Is this something I'm just going to have to deal with?
Thanks
H

30 to 40 second delay when printing a PDF

I have a PC running XP Pro- after a recent trip to the repair shop for a failed hard drive I am now experiencing a 30 to 40 second delay when trying to print pdf's. When I have a pdf open I click on the printer icon and then wait 30 or more seconds for the print window to open to select how many copies etc... after it opens I select print and then another 10 to 15 second delay before printing.
I was advised to go to the advanced on the print page and select to print as Image. This has not helped.
I have reinstalled the latest Adobe Reader as well as reinstalled printer. Nothing has helped.
Word documents print perfectly.
Any help would be appreciated -wasting lots of time at work!
Thanks!
Ray

I have a similar issue and have up to date drivers. Printing from other programs (eg word/excel and all my other software!) is "instant". The delay within Adobe Reader is only for the first document of the day. This issue has persisted from v9 to v X that I am currently using. I have uninstalled and re-installed Reader with no chnage.C'mon Adobe ... there must be a fix for this! For info I am running a Win7Pro w/s on a SBS2003 network, one printer is attached to the w/s by USB, the other printer is a network resource.

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

How to get the alv grid report in another screen when double click on basic

Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.

On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
    ls_fieldcat-tabname   = 'IT_FINAL_VALID'.
    ls_fieldcat-fieldname = 'AUFNR'.
    ls_fieldcat-scrtext_m = 'Service Order'.
    ls_fieldcat-ref_table = 'AUFK'.
    ls_fieldcat-ref_field = 'AUFNR'.
    ls_fieldcat-col_pos   = 1.
    ls_fieldcat-outputlen = 12.
    ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
    APPEND ls_fieldcat TO fcat_valid.
Hope this helps.

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

When double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

when double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

Unless you have attempted to downgrade to an older version of iTunes this is likely to be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

Excel cant find this file when double clicking to open

Hi,
Our Imacs 10.8.2 and 10.7.3 joined to windows 2008 domain cant open certain excel files from the network share. When double clicking the file or opening from excel -> file open it says it cant find the file. If I drag the file to the desktop then it will open when double clicked. I have tried disconnecting the network drive and reconnecting. I checked permissions and even tried a few cleaner products such as mac keeper and ccleaner and still the same issue. I even upgraded one of the macs from 10.6.8 to 10.7.3 and the issue persisted. Its very strange as some users can open but others cant. Any insight greatly appreciated.
Thanks
Lorne

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How to open each CS version file in its proper version program when double-clicked?

Hello everyone,
This one is about the coexistence of Indesign CS4 and CS5.
In my company: I'm working with Indesign CS4, but a colleague is testing CS5 in real day-to-day works, and everyday I come across CS5 files that I need to correct, so I have CS5 installed too. Now, when I boot in the morning, and no Indesign program is open yet, whenever I double-click on an Indesign file, the system will open it with CS5, no matter if the file is CS4 or CS5. I find this quite annoying, of course. I want each version file to get open right away in the proper version of the program. I'd think this is happening to a lot of people, but I've been looking for the issue in the forums and haven't found anything.
Of course I'm using roundabouts like having my colleague write "_CS5" at the end of each file, put CS4 in my startup items (so that once the program is open, the issue works the other way around and any Indesign file opens just in CS4 when double-clicked…).
Also, all the Indesign files appear on the desktop as CS5 files
I would welcome any ideas on the subject, thanks!

Muchas gracias! really useful. I'm gonna try it.

Show long text for Quality Notification when double click field in alv

I have an ALV grid called using a FM and I am using the user command routine to do somthing when a particular cell is clicked. I want to call up the root cause text from the action box of the QN via QM03 . I am building a BDC table to call with a CALL transaction but when I write my BDC up to that point, the program is running the BDC but not going to the point where the long text is displayed is i am in mode 'N'.
FORM user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
READ TABLE itab INDEX rs_selfield-tabindex.
CASE r_ucomm.
    WHEN '&IC1'.
      CASE rs_selfield-fieldname.
* When double click on root cause, display root cause long text
        WHEN 'ZZ_URCOD'.
          PERFORM display_root_cause_text.
          CALL TRANSACTION 'QM03' USING gt_bdc MODE 'N'.
ENDCASE.
ENDFORM.                    "user_command
FORM display_root_cause_text .
FREE gt_bdc.
PERFORM fill_bdc USING 'SAPLIQS0'     '0200'      'X'.
PERFORM fill_bdc USING 'RIWO00-QMNUM' itab-qmnum space.
PERFORM fill_bdc USING 'SAPLIQS0'     '7200'      'X'.
PERFORM fill_bdc USING 'BDC_OKCODE' '=10\TAB03' space.
PERFORM fill_bdc USING 'SAPLIQS0'     '7200'      'X'.
PERFORM fill_bdc USING 'BDC_CURSOR'
                         'QMICON-LTURSACHE(01)'     space.
PERFORM fill_bdc USING 'BDC_OKCODE' '=UX01' space.
ENDFORM.                    " DISPLAY_ROOT_CAUSE_TEXT
Any one have any suggestions of know of a BAPI that I can achieve the same thing?
Thanks
Larissa Maryniuk

Hello,
also try to use the messages clause (of type BDCMSGCOLL).
This will return the system messages.
call transaction 'XXXX' using BDCTAB
                                        mode 'P'
                                        messages into MSG_TAB.
Try to change the mode from 'N' to 'P' and try to place a breakpoint and check what happens.
Alternatively, you can read the Quality Notification text using FM READ_TEXT, and then show this data to the user in pop-up, rather than calling the tx.
Hope this helps.

Wrong file icons - files won't open when double-clicked

Hello,
I have a the following problem on a powerbook.
Most picture files (JPGs, but not bearing the .jpg extension) are not reckognised any more by the system.
In fact, they bear an icon of Terminal exec (a black square with a green "exec" note in the corner).
When double-clicked, they don't open in Preview any more, they act as a terminal app, and won't launch, obviously.
The only way to open them is to go the hard way : in Preview, File menu, Open...
Another way is to change their names by including the ".jpg" extensions, which seems to wake up the id from the system and place back the correct icon and app link. But we have 1000's of pictures...
Painful.
We tried rebuilding OS X desktop, repairing permissions, and update prebinding (using the excellent ToolsX 3.4). No results yet.
Any idea someone?
Thanks,
Powerbook 17 1GHz Mac OS X (10.4.3)

Have you tried selecting a picture, doing command i, for info, then in the info window setting the app for that file as Preview then clicking Change All?
Does ToolsX have a "Rebuild Launch Services database" function
or an update for "whatis" and "Locate" databases?

Movies with iTunes Extras show only HTML code and not title screen when double clicked.

I only noticed this after some iTunes updates. Any movies that have iTunes Extras donot show the "Title Screen" when double clicked. They only show HTML script. I can still watch the movies, and can access the extras by going to the folder they are in, but thats a pain. I have purchased other movies with extras since encountering the problem and have the same issue. I run windows Vista on a 32-bit system. I have all updated drivers. I have searched the web for an answer but couldnt find anything. It is prob something insanely easy. Any help would be appriciated.
Example of text that appears when double clicking:
<!doctype html>
<html>
<head>
     <meta http-equiv="Content-type" content="text/html; charset=utf-8" />
     <meta name="hdtv-fullscreen" content="true" />
     <meta name="hdtv-cursor-off" content="true" />
     <title>Paul (Unrated) [2011]</title>
     
<script type="text/javascript" src="TuneKit/src/TuneKit.js" charset="utf-8"></script>
     
     <link rel="stylesheet" href="css/shared.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/home.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/chapters.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/features.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/more.css" type="text/css" media="screen" />
     
     <script type="text/javascript" src="controllers/data.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/home.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/chapters.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/features.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/more.js" charset="utf-8"></script>
</head>
<body>
     <div id="bleed">
          <div id="navigation">
               <img id="pic0" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
          <img id="pic1" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
               <img id="pic2" class="picBLANK" src="images/home/Paul_mm_background_02.jpg"/>
          <img id="pic3" class="picBLANK" src="images/home/Paul_mm_background_03.jpg" />
          <img id="pic4" class="picBLANK" src="images/home/Paul_mm_background_04.jpg" />
          <img id="pic5" class="picBLANK" src="images/home/Paul_mm_background_05.jpg" />
          <img id="pic6" class="picBLANK" src="images/home/Paul_mm_background_06.jpg" />
          <img id="pic7" class="picBLANK" src="images/home/Paul_mm_background_07.jpg" />
          <img id="pic8" class="picBLANK" src="images/home/Paul_mm_background_08.jpg" />
          <img id="pic9" class="picBLANK" src="images/home/Paul_mm_background_09.jpg" />
          <img id="pic10" class="picBLANK" src="images/home/Paul_mm_background_01.jpg" />
               <div id="vid" class="vid_bg">
                    </div>
          </div>
     </div>
</body>
</html>

The fix from this other post worked for me.
https://discussions.apple.com/message/17691332#17691332
FIX:
Go into "Get Info" and set the Album name to the name of the movie for both the movie and the "Extra". This will fix it.

5 second delay when double-clicking a track.....?

Similar Messages

Maybe you are looking for