5 User NetWare 6 NSBS User+Novell+610 not allocating

28 Users on this network.
My assumption on the 5 User question is that its the +610 which needs
to be +600
but there is also the confusing bit of into in the 2nd section the 25
User where it says 25 used 0 installed and 25 Exceeded.
I have removed and reinstalled the licenses to no effect, so I am
looking for some hints for where to start troubleshooting (assuming the
+610 license is correct for this Server), or perhaps i'll be hunting
down an NSBS 5 user +600 license?
Product Licensing Usage Report
Date and time of licensing data: 02/21/2008 11:55:34 am
Product:
NetWare 6 Server+Novell+600
License container contexts:
Office
Current License Usage (100.0%):
1 units used
1 units installed
Duration Time Period (01/22/2008 11:55:34 am-02/21/2008 11:55:34 am):
Peak License Usage (100.0% occurred on 02/21/2008)
1 units used
1 units installed
Hours Exceeded:
Product Licensing Usage Report
Date and time of licensing data: 02/21/2008 11:48:29 am
Product:
NetWare 6 NSBS User+Novell+600
License container contexts:
Office
Current License Usage (100.0%):
25 units used
25 units installed
Duration Time Period (01/23/2008 11:48:29 am-02/21/2008 11:48:29 am):
Usage exceeded the number of license units installed 96.7% of the time.
Peak License Usage (100.0% occurred on 02/21/2008)
25 units used
25 units installed
Hours Exceeded:
Date Used Installed Exceeded
01/23/2008 12:48:29 pm 25 0 25
Product Licensing Usage Report
Date and time of licensing data: 02/21/2008 11:54:14 am
Product:
NetWare 6 NSBS User+Novell+610
License container contexts:
Office
Current License Usage (0.0%):
0 units used
5 units installed
Duration Time Period (01/22/2008 11:54:14 am-02/21/2008 11:54:14 am):
Peak License Usage (0.0% occurred on 02/21/2008)
0 units used
5 units installed
Hours Exceeded:
Date Used Installed Exceeded

It has been a while since I used 6.0 SBS (currently on 6.5), but what
licenses do you have exactly? IIRC can you not mix regular and SBS 6.0
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Discover the new Novell forums at http://forums.novell.com
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement

Similar Messages

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Error message: User data is not indexed, yet. Index user data first

    Greeting All,
    Each time I try to index a 'Prepared' searchObjectConnector in the cockpit.. I get a message <
    User data is not indexed, yet. Index user data first>. even that I ran the z_ESH_AU_UPLOAD_AUTH_RFC_720 report in R/3 system.. and checked the auth /user data in the admin cockpit.. and it was indexed..
    1.any idea why I keep getting this error
    2.any idea how can I clean the buffer or the message Queu.. my guess this might  be not error but a q message..
    3. any suggestion please
    Thanks

    Hi Areege,
      I noticed that you created an OSS message on this issue. That was a good idea.
    There is an answer for you in OSS from yesterday.
    Kind regards, Klaus

  • When I go to update my software using the app store download, it always asks for the previous user's ID, not mine.  Please help!

    When I go to update my software using the app store download, it always asks for the previous user's ID, not mine (my IT guy at school's-I am a faculty with admin priviledges).  I have signed in as me, have set the main preferences login user as me,and everywhere on the laptop I can use my apple ID except here.  It always shows me a greyed out ID of my IT.  How can I reset this to my ID? It doesn't give me an option to change the user ID, only a link to reset password.  I reset it, but it did not change the problem.  Can someone help me?

    It's not an ID problem, it's an ownership problem.
    When someone uses their personal Apple ID to buy and download content, the content is licensed to them and has their Apple ID engrained in it's DNA. It is an anti-piracy program. And when that personal Apple ID is used to setup a new Mac, it involves the Mac itself, the shipping OS and any pre-installed apps as well.
    It's not the correct way to handle Macs that belong to a business or an institution. And had it been handled correctly they would not now be in this predictument needing a drastic remedy.

  • User POV does not pop up from Report in task list

    Hello,
    I've created a report within Related Content in HFM and added it to a task list--the problem I'm experiencing is when I run the report the User POV does not pop up, rather it simply uses the default POV (ie, whatever is set up in data grids or process management)--this happens if I try to run it directly from Related Content or from the task list. My preferences within Financial Reporting have already been updated to 'On' to preview the User POV and if I run the report from Financial Reporting (ie, Explore) the User POV works fine--so, it seems like adding a report to Related Content disables the User POV from popping up. I'm running on Financial Reporting v11.1.2.1 and HFM v11.1.2.1.104.3701. I can't find anything about it within this forum, knowledge base or as a known issue in the ReadMe for the .104 patch set for HFM.
    Can anybody fill me in on if this is functionality by design or a defect?
    Best regards,
    Jason Call

    Financial Reports do not work as you might expect when they are used as a related content item. As you already have realized, you will not be able to adjust the FR POV items from inside of HFM.
    A 'work around' would be to link to the report and put that link in the Tasklist. This will then open the report 'normally' and you will get the POV functionality that you expect.
    To find the link to a report, open the report's properties and look at the 'smartcut' value. (That is a URL directly to the report)

  • 1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

    Hi,
    I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
    I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting “CSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23”.
    Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
    Other reports are working fine.
    1. TACAS+ Accounting - not working
    2. Logged in Users - not working
    3. TACAS+ Administration - working
    4. Passed Authentication - working
    5. Failed Attempts - working
    Any suggestions or any idea, please revert.
    Regards
    Vineet

    Hi,
    Thanks
    Yes I have configured the command “aaa accounting exec default start-stop group tacacs+”
    As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
    Regards,
    Vineet

  • Searches don't work as PUBLIC user (i.e. not logged on)

    Hello world,
    We're using Portal 3.0.9.8.1 with Patch 1949492 installed. This is on 8.1.7.2.4 SE Database.
    When performing searches as the PUBLIC user (i.e. not logged on) we only get limited returns (often zero) where there should be 100s. Documents that we know exist and that PUBLIC can see, navigate to and open do not appear in the search results.
    Logged on this works fine. All documents are Made Public and we have various different categories that they're assigned to. For one Content Area, it never retrieves anything in searches as PUBLIC, despite the fact that it contains a great many PUBLIC items.
    Has anybody experienced anything similar? This has never worked on any version of Portal we've had and Oracle Support seem at a loss.
    Please help!

    Ross,
    Hmm.. I suppose you're going to tell me that the quickest way to create a new TAR is on-line at 'metalink.oracle.com'??
    This problem is already with support (TAR 2520870.1 - logged 22-Feb-2002), but thus far I've had no results.
    I thought perhaps others may have experienced the same problem.
    Cheers
    Dave Dave
    Please persevere with the TAR that you've already raised. I've taken a look at it and there seem to be a couple of issues that you've seen, which could be confusing the issue in the TAR.
    The core issue is the one that you've raised in this forum question is why you don't see public results you expect when searching as the public user. This should work exactly as you expect it to.
    Support now have one of your content areas so they should be able to determine if there are some specific circumstances which are causing the public items not to be returned.
    Ross

  • How to Block user from Sending IM or Hide Presence of there user who is not in his department

    Hi All,
    How to Block user from Sending IM or Hide Presence of there user who is not in his department.
    Thank you

    Hi Jp,
    Method 1:
    You can use the Enhanced Privacy Mode in Lync 2013
    <section class="ocpSection">
    Enable Privacy Mode
    By default, everyone except Blocked Contacts can see your presence status. To modify the privacy settings, you can do the following:
    In the Lync main window, click the Options button.
    In the Lync - Options dialog box, click Status, and then do one of the following:
    Click I want everyone to be able to see my presence regardless of system settings (override default settings).
    Click I want the system administrator to decide - currently everyone can see my presence but this could change in the future.
    </section>
    About Enhanced Privacy Mode
    If your organization has enabled Enhanced Privacy Mode in Lync, you can choose whether to limit visibility of your presence information to only those people you’ve added to your Contacts list. You do that by selecting one of the following on the
    Options->Status window:
    I want everyone to be able to see my presence
    I only want people in my Contacts list to see my presence
    Method 2:
    Using Privacy Relationship, you can block a particular user by adding him to blocked contacts
    Anil Kumar (MCITP)
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • User "Administrator" does not exist

    Hello everybody,
    i implemented SP Stack 13 in our Java Instance! Now we got some Problems in our Portal.
    1) Selfgenerated IViews cannot be accessed. We got the a Portal runtimeerror. In the Tracefile we found the following message:
    #1.5 #0011258C7044006100000253000003EC0004418B74EB8814#1197967124597#com.sap.portal.sapapplication#sap.com/irj#com.sap.portal.sapapplication#TESTUSER1#36624##srv053_BWT_18713950#Guest#95ba2ce0ad4411dcbf910011258c7044#SAPEngine_Application_Thread[impl:3]_38##0#0#Error#1#/System/Server#Java###Content pass of Application Integrator failed.
    Component Name:       'com.sap.portal.appintegrator.sap.BWReport',
    Context Name (iView): 'pcd:portal_content/every_user/general/ARB/ARB-FI/AR_FI_Role/ARB_QM_REP_0/AR_FI_SY_WEB_KONZUMS_RW_S',
    Top Layer:            'BWReport/TopLayer',
    Producer ID (FPN):    'null',
    System Alias:         'BWTCLNT001',
    [EXCEPTION]
    #1#com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to parse template '<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>'; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
         at com.sapportals.portal.appintegrator.layer.AbstractIntegrationLayer.processTemplate(AbstractIntegrationLayer.java:455)
         at com.sapportals.portal.appintegrator.layer.URLTemplateProcessLayer.processLayer(URLTemplateProcessLayer.java:33)
         at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:159)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doActionPass(AbstractIntegratorComponent.java:68)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:54)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:396)
         at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
         at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
         at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java:799)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sapportals.portal.appintegrator.template_processor.TemplateParserException: Unable to parse template '<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>'; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
         at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processWholeTagExpression(TemplateProcessor.java:167)
         at com.sapportals.portal.appintegrator.template_processor.compiler.TemplateCompiler.processWholeTagExpression(TemplateCompiler.java:54)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseSimpleExpression(TemplateParser.java:234)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpression(TemplateParser.java:188)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpressionEx(TemplateParser.java:210)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpression(TemplateParser.java:193)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseTagExpression(TemplateParser.java:170)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseTemplateExpressionPart(TemplateParser.java:97)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parse(TemplateParser.java:89)
         at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parse(TemplateParser.java:83)
         at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processImpl(TemplateProcessor.java:407)
         at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:374)
         at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:386)
         at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:54)
         at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:107)
         at com.sapportals.portal.appintegrator.layer.AbstractIntegrationLayer.processTemplate(AbstractIntegrationLayer.java:441)
         ... 30 more
    Caused by: java.lang.ClassCastException
         at com.sap.portal.fpn.runtime.services.AppIntegratorInformationService.getProducerByAlias(AppIntegratorInformationService.java:126)
         at com.sap.portal.fpn.runtime.services.AppIntegratorInformationService.buildFPNLocatorForShortcut(AppIntegratorInformationService.java:142)
         at com.sap.portal.fpn.runtime.services.AppIntegratorInformationService.transformURL(AppIntegratorInformationService.java:204)
         at com.sapportals.portal.appintegrator.template_processor.context.FPNWrapper.getTerminal(FPNWrapper.java:69)
         at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processWholeTagExpression(TemplateProcessor.java:152)
         ... 45 more
    #1.5 #0011258C7044006100000255000003EC0004418B74EC9CB6#1197967124690#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#TESTUSER1#36624##srv053_BWT_18713950#Guest#95ba2ce0ad4411dcbf910011258c7044#SAPEngine_Application_Thread[impl:3]_38##0#0#Error#1#/System/Server#Java###Exception ID:09:38_18/12/07_0005_18713950
    [EXCEPTION]
    #1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    Component : pcd:portal_content/every_user/general/ARB/ARB-FI/AR_FI_Role/ARB_QM_REP_0/AR_FI_SY_WEB_KONZUMS_RW_S
    Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
    User : TESTUSER1
         at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;&lt;System.scheme&gt;://&lt;System.servername&gt;:&lt;System.serverport&gt;&lt;BWLauncherComponent[PORTAL_URL]&gt;;jsessionid=&lt;Request.JSessionID&gt;?sap-bw-iViewID=&lt;FPN.PCDHomeLocation[url_ENCODE]&gt;&amp;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;&amp;sap-pp-producerid=&lt;producerID&gt;&amp;sap-pp-consumerBaseURL=&lt;Request.BaseURL[url_ENCODE]&gt;&amp;theme=&lt;LAF.Theme[url_ENCODE]&gt;&amp;sap-lafversions=&lt;LAF.AllVersions[url_ENCODE]&gt;&amp;&lt;BusinessParameters&gt;&\#39;; the problem occured at position 138. Cannot process expression &lt;FPN.PCDHomeLocation&gt;
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         ... 29 more
    #1.5 #0011258C7044006100000257000003EC0004418B74EEE9EF#1197967124894#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#TESTUSER1#36624##srv053_BWT_18713950#Guest#95ba2ce0ad4411dcbf910011258c7044#SAPEngine_Application_Thread[impl:3]_38##0#0#Error##Java###09:38_18/12/07_0005_18713950
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;&lt;System.scheme&gt;://&lt;System.servername&gt;:&lt;System.serverport&gt;&lt;BWLauncherComponent[PORTAL_URL]&gt;;jsessionid=&lt;Request.JSessionID&gt;?sap-bw-iViewID=&lt;FPN.PCDHomeLocation[url_ENCODE]&gt;&amp;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;&amp;sap-pp-producerid=&lt;producerID&gt;&amp;sap-pp-consumerBaseURL=&lt;Request.BaseURL[url_ENCODE]&gt;&amp;theme=&lt;LAF.Theme[url_ENCODE]&gt;&amp;sap-lafversions=&lt;LAF.AllVersions[url_ENCODE]&gt;&amp;&lt;BusinessParameters&gt;&\#39;; the problem occured at position 138. Cannot process expression &lt;FPN.PCDHomeLocation&gt;
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    2) In the Trace file all the Time occurs the following message:
    #1.5 #0011258C7044006F0000027A000003EC0004418B678FE974#1197966900571#com.sap.workflow#sap.com/irj#com.sap.workflow#J2EE_GUEST#0####8f2fa3e0aa4d11dcb0150011258c7044#Thread[ThreadPool.Worker4,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/Applications/Workflow/General#Plain###TaskSchedulerDeadline.run()#
    #1.5 #0011258C7044006F0000027B000003EC0004418B678FEBD8#1197966900571#com.sap.workflow#sap.com/irj#com.sap.workflow.#J2EE_GUEST#0####8f2fa3e0aa4d11dcb0150011258c7044#Thread[ThreadPool.Worker4,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###com.sap.security.api.NoSuchUserException: User "Administrator" does not exist.
         at com.sap.security.core.imp.UserFactory.getUserByUniqueName(UserFactory.java:1635)
         at com.sap.security.core.imp.UserFactory.getUserByUniqueName(UserFactory.java:1574)
         at com.sap.security.core.imp.UserFactory.getUserByUniqueName(UserFactory.java:1560)
         at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:90)
         at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
         at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
         at java.lang.Thread.run(Thread.java:534)
    Can somebody tell me what is going on here?
    Thanks so long
    Edited by: Oliver Heinzelmann on Jan 11, 2008 2:17 PM
    Problem #1 resolved: Ask me for solution

    Hi Oliver,
    A contact at SAP has indicated that in the KM Task Scheduler Deadline (com.sap.workflow.es.scheduler.TaskScheduler.Deadline.run) that the user "Administrator"  is hard coded in the SPS13 release.
    Depending on what you are using the KM for you could reduce the frequency of the alert by changing the scheduling of this task which by default is every five minutes.
    Although the release notes of the following patches didn't formerly address the hard coding issue, I decided to apply them anyway as I thought that a later release may have fixed the issue.  However it is not fixed with these interim patches.
    KMCBC13P_1-10003491.SCA   Patch for KMC BASE COMPONENTS 7.00 SP13 
    KMCCM13P_1-10003492.SCA   Patch for KMC CONTENT MANAGEMENT 7.00 SP13
    I guess we will need to wait for a further patch to be released and ignore the error in the meantime.
    Regards
    Craig

  • Safari (7.0.1) is non-responsive (spinning pinwheel) upon start up.  It will work in temp user account but not in my main user acct.  I tried reinstall via comman-r prompt on start up but the problem persists.  Any suggestion for reinstall or repair?

    Safari is non-responsive after intitial start up.  Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program.  Safari works in temporary user account but not in my primary user account.  I have reinstalled osx via the command-r upon start up and the problem still persists.  Any suggestions on how to reinstall or repair safari?

    Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
    So the mystery continues, but these additional facts will help with the diagnosis, I hope.
    Thanks again for your suggestion.
    Gordon

  • Can't enroll device for user and this user account is not authorized to use Windows Intune.

    Hello,
    We have SCCM 2012 R2 inegrated with intune via an intune subscription. When I enroll a device with my admin account there are no problems, but when I want to add it with another user account which is a member of the Intune users collection, it can't be enrolled.
    When I tested on https://portal.manage.microsoft.com with the credentials of the user I couldn't connect and received the following error: This user account is not authorized to use Windows Intune.
    Do I have to do anything in the https://accounts.manage.microsoft.com as there is a checkbox saying Windows Intune. this is unchecked now for all the users even my own account on which I'm able to enroll a device.
    Or is this a license problem? I know configuration Manager uses licenses for Intune but where can we track how many licenses are used and how many available? Is there some kind of report available?
    I hope someone can help me
    Kind regards,
    Robben

    I added them yesterday and this morning I was still not able to enroll a device with the added user his credentials.
    The UPN is correct. Maybe I need to force the DirSync then? Or will one day of waiting be enough normally?
    I can see the user in the intune management portal. Does this means it has been synced?
    Another thing I noticed is the cloudusersync.log doesn't show them being added? What I was thinking is I first used the all Users collection in the subscription and afterwards I changed it to a specific collection with only the test users. Could it be that
    they all synced already and the log doesn't show them anymore?
    A warning in this log shows this also:
    WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()  
     SMS_CLOUD_USERSYNC    23/04/2014 15:02:18    7684 (0x1E04)
    I don't know if that has anything to do with this?
    this is an extract of that log:
    CCloudUserSync::Process - User sync processing thread is now stopping.    SMS_CLOUD_USERSYNC    23/04/2014 14:59:42    8144 (0x1FD0)
    SMS_EXECUTIVE started SMS_CLOUD_USERSYNC as thread ID 7684 (0x1E04).    SMS_CLOUD_USERSYNC    23/04/2014 15:02:15    7572 (0x1D94)
    CCloudUserSync::Process - User sync processing has started.    SMS_CLOUD_USERSYNC    23/04/2014 15:02:15    7684 (0x1E04)
    Starting user sync ...    SMS_CLOUD_USERSYNC    23/04/2014 15:02:15    7684 (0x1E04)
    WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()  
     SMS_CLOUD_USERSYNC    23/04/2014 15:02:18    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:02:18    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:22:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:20    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:20    7684 (0x1E04)
    kind regards,
    Robben

  • How do I connect a Lexmark x6570 printer to my iMac wirelessly?  The basic user guides are not helping me and the add printer is not finding my printer...

    How do you connect a lexmark x6570 printer to an iMac wirelessly?  The basic user manuals are not helpful as the printer is not showing up when using the add printer function.  I my printer is working fine wirelessly with my windows laptop so it appears to be functioning fine.  This is my first time using an Apple at home...
    Thank you.

    Hello,
    I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes. 
    Thanks!

  • How to get a list of Local Users who has not logged in for 3 months or around 90 days

    hi
    i found this thread to pull out a list of local users
    Retrieve all local user accounts information on remote computers (PowerShell)
    however, i need to filter out users who has not logged in for 3 months or around 90 days, how can i do further filtering?
    i understand dsquery has an -inactive <xweeks> , however i am doing it for local accounts

    $ErrorActionPreference = "silentlycontinue"
    $([ADSI]"WinNT://$env:COMPUTERNAME").Children | where {$_.SchemaClassName -eq 'user' -and $_.lastLogin -gt (Get-Date).AddDays(-90)} | ft name,lastlogin
    using the sample from the link extendend with the 90 days criteria, the erroraction preference surpresses the errors you get for accounts with no lastlogon value (guest being a typical one)

  • Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

    I am running an environment with an Active Directory and Terminal Servers.
    I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
    The fixes I found are related to local users only.
    When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab"  lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
    I give rights to the user to read/write the "home" folder which is mapped for folder redirection.  An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon.  This is when I am
    presented with the error message below:
    "The registration of the service "User Profile Service" has failed. 
    The user profile can not be loaded"
    Does anyone have any experience with this or know a suitable fix.  Again this is for the "Roaming" profile creation no local.
    Many thanks in advance.

    Hi,
    Thank you for posting in Windows Server Forum.
    Did you receive for any one user or for all users?
    Have you tried to solve the issue by fixing the user account profile?
    For that you can adjust the registry setting “ProfileImagePath” with
    particular SID of that user under below mention path.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
    More information.
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215
    Hope it helps!
    Thanks.
    Dharmesh Solanki

Maybe you are looking for

  • Would like to see 5-days in Month View

    I'd like to see 5-days (without Sat/Sun) in Month View, but iCal keeps showing me seven. These are the only two options and for some reason the program won't accept my choice of 5-days in Preferences. A few of my colleagues took a stab at it without

  • SCCM 2012 R2 CU2 Admin Console Connects But Closes In A Few Seconds

    I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. There are four servers: site server, secondary DP, WSUS/SUP, and a SQL server. On the first three the SCCM Admin Console will open. But when logged into the SQL server, the Admin Console opens

  • Gray (233,233,233) region trembles on DELL U2412M

    This is weired but really happening. I just bought DELL U2412 monitor, and used DVI and DVI adapter. Now when I launch Eclipse, the background of the window is gray (RGB 233,233,233) and it trembles, as if it is an old fluroscent light. It is not the

  • Looking up Identical EJB both locally and remotely

    prior to posting this request, i have read and attempted multiple solutions to this problem suggested in the forums to no avail. if i have the same EAR, which contains both an EJB Component and a WAR, deployed to multiple servers, is it possible to l

  • Playing An Audio Affect In Reverse?

    Hi There, I was wondering if playing an audio affect sound in reverse is possible..? I'm trying to do it with the comedy whistle sound.. Thank You, Eric G4 Desktop (QuickSilver) Dual 1 Gig Processors   Mac OS X (10.4.6)   1.5 Gigs of RAM