5.x to 4.5 xml horror...oh the horror

OK guys,
I've followed the LAFCUPG on using xml to go from 5.x to 4.5 with projects.
It works....if the capture settings were set to 2 audio tracks in fcp5.
Otherwise, for example, if the clips were digitized, with let's say 8 audio tracks of empty information(basic AJA and KONA Firewire settings), they will not reconnect.
So, I used QTpro to delete the 6 audio tracks that contain nothing on the batch clips and try opening the xml in 4.5 again. In fcp5 it recconected the modified(less 6 audio channels of nothing) files no problem.
But, going back to 4.5 did not go well. Well, some strange bugaroos on this one. If the clip was in a sequence it would reconnect, but show up in the bin as unconnected, even tho I could see it in the timeline. In the bin, it would show up as offline, even tho it was "online" in the sequence.
If the clip was not in the sequence it would not reconnect at all.
So..after wasting my time for 3 hours and not willing to fork over another 3 grand to upgrade my home suite to my work suite.....
I'll give my editing suite away to the first person who can show me a camera that records 8 frickin channels of audio. This is a total waste of code.
AVID RULES!!!!!!!!!!!!!!
You can take a brand new project file from the newest AVID AND yes I said AND open it up in a 10 year old Media Composer Project without going to arcane xml.
Who makes software that is not backward compatable for less then 6 months....APPLE.

I'll give my editing suite away to the first person who can show me a camera that records 8 frickin channels of audio. This is a total waste of code.
well the Sony XDCAM HD records 4 channels
http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=4 29066&is=REG&addedTroughType=search
and this Sony HD deck does 12 i/o
http://bssc.sel.sony.com/BroadcastandBusiness/minisites/cinealta/post/srw5000.sh tml
This Panasonic deck does 8 i/o http://catalog2.panasonic.com/webapp/wcs/stores/servlet/ModelDetail?storeId=1120 1&catalogId=13051&itemId=68620&catGroupId=14594&surfModel=AJ-HD3700B&displayTab= F
OH ya pretty much any deck that supports HD-SDI has 8Channels
and if you need to get some audio off a DA 88 you would need 8 channels record ablity
DAVE

Similar Messages

Problem in creatinga sales order idoc into XML file in the same appl server

Hai....friends....
I am tring to send an sales order as iDOC to a xml port in the same application server....
1. have created a xml port with path..\usr\sap\RRM\SYS\global\.
2. assigned it to logical system.
3.Have a RFC destination of TCP/ip(LOCAL_EXEC)
but in bd64 after creating model view when i am generating partner profiles a tRFC PORT has been automatically created.
then finally the IDOc has been created but its saying....IDOC CANNOT OR SHOULD NOT BE SENT...
Pls help me regarding this...
thx,
ram

Hi Thanks for your updates,
But I got the same error, while pass the data from abap into XML.
error message,what I am getting is
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/tempcustomers.xml'. Line 1, Position 1
#<?xml version="1.0" encoding="utf-16"?>
Thanks
Gowrishankar

Tranferring XML data to the B1 System

Hi,
Iam very new to the B1 system..
Iam looking to transfer the data from the XML file to the B1 system.
to make it clear, the requirement is i have a purchase order coming from one system and it is saved in the server..the data in the XML file will have to be shown in the B1 system as a sales order..
Please any one can help on this ASAP.
Thanks,
Bhaskar.

Bhaskar,
The forum that you have posted your question in is for questions related to the SAP Business One Integration to SAP NetWeaver. You question seems more generic as to how to import XML into SAP Business One.
One way of doing this would be to create a small program using the Business One SDK. You can search the SAP Business One SDK Discussion Forum as well as look at the SDK documentation that comes with the product. If you converted the XML data to text, you could use the Data Transfer Workbench. There are different options that you have.
Eddy

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

Want to create XML tag from the query

Here i want to create a xml output from the below code for the given P_repair_number can anyone help me for the code i have written
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
facing the above error when run from concurrent program
Procedure dfdfdf(p_repair_number number,
 errbuf OUT VARCHAR2,
 retcode OUT NUMBER) as
v_error_code NUMBER; -- error code
v_error_message VARCHAR2(255); -- error message
v_text_msg VARCHAR2(100);
cursor Rodetails(p_repair_number IN NUMBER) is
SELECT
dra.repair_number,
dra.repair_line_id,
items.concatenated_segments item_name,
items.description item_desc,
dra.inventory_item_id,
sr.incident_number sr_incident_number,
decode(dra.customer_product_id, '',dra.serial_number,cp.serial_number) serial_number,
ltrim(oeh.order_number) rma_number,
rstl.resource_name ro_owner_name,
fndl.meaning flow_status_name,
dra.status ro_status_code,
drtt.name repair_type_name,
dra.problem_description,
dra.promise_date,
rgtl.group_name repair_org_name,
decode(dra.customer_product_id, '',dra.item_revision,cp.inventory_revision) revision,
cp.lot_number,
dra.unit_of_measure uom_code,
uom.unit_of_measure_tl uom_name,
dra.quantity,
cp.instance_number ib_instance_number,
plkup.meaning ro_priority_meaning
FROM
csd_repairs dra,
csd_repair_types_tl drtt,
cs_incidents_all_b sr,
csi_item_instances cp,
fnd_lookups fndl,
csd_flow_statuses_b fsb,
mtl_system_items_kfv items,
mtl_units_of_measure_tl uom,
jtf_rs_resource_extns_tl rstl,
jtf_rs_groups_tl rgtl,
oe_order_headers_all oeh,
cs_estimate_details edt,
csd_product_transactions txns,
fnd_lookups plkup
WHERE dra.repair_type_id = drtt.repair_type_id
AND drtt.language = userenv('LANG')
AND dra.repair_mode = 'WIP'
AND dra.incident_id = sr.incident_id
AND dra.CUSTOMER_PRODUCT_ID = cp.INSTANCE_ID(+)
AND dra.flow_status_id = fsb.flow_status_id
AND fsb.flow_status_code = fndl.lookup_code
AND fndl.lookup_type = 'CSD_REPAIR_FLOW_STATUS'
AND dra.inventory_item_id = items.inventory_item_id
AND dra.unit_of_measure = uom.uom_code
AND uom.language = userenv('LANG')
AND dra.resource_id = rstl.resource_id (+)
AND rstl.category (+) = 'EMPLOYEE'
AND rstl.language (+) = userenv('LANG')
AND dra.owning_organization_id = rgtl.group_id (+)
AND rgtl.language (+) = userenv('LANG')
AND dra.repair_line_id = txns.repair_line_id
AND txns.estimate_detail_id = edt.estimate_detail_id
AND edt.order_header_id = oeh.header_id
AND edt.line_category_code = 'RETURN'
AND dra.currency_code = oeh.transactional_curr_code
AND dra.ro_priority_code = plkup.lookup_code(+)
AND plkup.lookup_type(+) = 'CSD_RO_PRIORITY'
AND items.organization_id = cs_std.get_item_valdn_orgzn_id
AND dra.repair_number=p_repair_number
AND rownum <50;
begin
errbuf := NULL;
retcode := 0;
SAVEPOINT Create_external_orders;
--retcode := FND_API.G_RET_STS_SUCCESS;
IF (fnd_log.level_procedure >= fnd_log.g_current_runtime_level) THEN
 fnd_log.STRING (fnd_log.level_procedure, 'CSD.PLSQL.XXTNT_CSD_CREATEORDER.SUBMIT_CREATE_ORDER.BEGIN', 'Enter - PrintTraveller');
END IF;
--FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0"?>');
--FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORDER>');
FOR v_rodetails IN Rodetails(p_repair_number)
LOOP
/*For each record create a group tag <G_RODETAILS> at the start*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0"?>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORDER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<G_RODETAILS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_NUMBER>' || v_rodetails.repair_number ||
 '</REPAIR_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_LINE_ID>' || v_rodetails.repair_line_id
 || '</REPAIR_LINE_ID>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<ITEM_NAME>' || v_rodetails.ITEM_NAME
 ||'</ITEM_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<ITEM_DESC>' || v_rodetails.ITEM_DESC
 || '</ITEM_DESC>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SR_INCIDENT_NUMBER>' || v_rodetails.SR_INCIDENT_NUMBER ||
 '</SR_INCIDENT_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SERIAL_NUMBER>' ||v_rodetails.SERIAL_NUMBER
 ||'</SERIAL_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RMA_NUMBER>' || v_rodetails.RMA_NUMBER
 || '</RMA_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_OWNER_NAME>' ||v_rodetails.RO_OWNER_NAME ||
 '</RO_OWNER_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<FLOW_STATUS_NAME>' || v_rodetails.FLOW_STATUS_NAME
 ||'</FLOW_STATUS_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_STATUS_CODE>' || v_rodetails.RO_STATUS_CODE
 || '</RO_STATUS_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_TYPE_NAME>' || v_rodetails.REPAIR_TYPE_NAME ||
 '</REPAIR_TYPE_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<PROBLEM_DESCRIPTION>' || v_rodetails.PROBLEM_DESCRIPTION
 ||'</PROBLEM_DESCRIPTION>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<PROMISE_DATE>' || v_rodetails.PROMISE_DATE
 || '</PROMISE_DATE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_OWNER_NAME>' || v_rodetails.RO_OWNER_NAME ||
 '</RO_OWNER_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORG_NAME>' || v_rodetails.REPAIR_ORG_NAME
 ||'</REPAIR_ORG_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_STATUS_CODE>' || v_rodetails.RO_STATUS_CODE
 || '</RO_STATUS_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REVISION>' || v_rodetails.REVISION ||
 '</REVISION>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<LOT_NUMBER>' || v_rodetails.LOT_NUMBER
 ||'</LOT_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<UOM_CODE>' || v_rodetails.UOM_CODE
 || '</UOM_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<UOM_NAME>' ||v_rodetails.UOM_NAME ||
 '</UOM_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<QUANTITY>' || v_rodetails.QUANTITY
 ||'</QUANTITY>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<IB_INSTANCE_NUMBER>' || v_rodetails.IB_INSTANCE_NUMBER
 || '</IB_INSTANCE_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_PRIORITY_MEANING>' || v_rodetails.RO_PRIORITY_MEANING ||
 '</RO_PRIORITY_MEANING>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</G_RODETAILS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</REPAIR_ORDER>');
END LOOP;
IF(retcode != FND_API.G_RET_STS_SUCCESS) THEN
 RAISE FND_API.G_EXC_ERROR;
 END IF;
 IF (fnd_log.level_procedure >= fnd_log.g_current_runtime_level) THEN
 fnd_log.STRING (fnd_log.level_statement, 'CSD.PLSQL.XXTNT_CSD_CREATEORDER.SUBMIT_CREATE_ORDER', ' In PrintTraveller');
 END IF;
fnd_file.put_line(fnd_file.log, 'Successfully completed PrintTraveller');
EXCEPTION
|| Catch all error.
WHEN OTHERS THEN
ROLLBACK;
v_error_code := SQLCODE;
v_text_msg := 'Fatal Error, Oracle Error is: '
|| TO_CHAR (v_error_code, '99999');
fnd_file.put_line (fnd_file.log, v_text_msg);
v_error_message := SQLERRM;
fnd_file.put_line (fnd_file.log, v_error_message);
end dfdfdf;Edited by: user12053530 on Apr 19, 2010 5:54 AM

However using SYS.ODCIVARCHAR2LIST makes sense if your query is a part of bigger processing (PL/SQL procedure or function) and you will do some processing depending on File_Type, like in this example (not compiled, could contain syntax errors):
DECLARE
l_stid VARCHAR2(10);
l_address VARCHAR2(30);
l_File_Type_tab SYS.ODCIVARCHAR2LIST;
cur_cursor IS SELECT STID,
 ADDRESS,
 CAST(COLLECT(DISTINCT File_Type) AS SYS.ODCIVARCHAR2LIST) AS File_Type
 FROM (
 SELECT STID,
 ADDRESS,
 File_Type
 FROM DUMMY
 GROUP BY STID, ADDRESS;
BEGIN
OPEN cur_cursor;
<<main_loop>>
WHILE (1=1) LOOP
 FETCH cur_cursor INTO l_stid, l_address, l_File_Type_tab;
 EXIT WHEN cur_cursor%NOTFOUND;
 -- Now do processing for each File_Type in l_File_Type_tab;
 <<each_file_type>>
 FOR i IN l_File_Type_tab.FIRST .. l_File_Type_tab.LAST LOOP
 -- for example:
 -- IF l_File_Type_tab(i) = 'SALES'
 -- THEN
 -- do_something(l_stid, l_address);
 -- ELSIF l_File_Type_tab(i) = 'TRANSFER'
 -- THEN
 -- do_something_else(l_stid, l_address);
 -- ELSE
 -- do_something_default(l_stid, l_address);
 -- END IF;
 END LOOP each_file_type;
END LOOP main_loop;
CLOSE cur_cursor;
END;

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb.But the output records is originally 4000 records. When copy to new excel it is showing 3.5 mb only. Does anyone knows the answer for this issue?

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?

Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan

Is a copy of .xml file on the iPod too? If so, how can I copy ONLY the .xml file to my computer and NOT have to copy all my music files too?

I had to re-load my OS (Windows XP Pro) from a HD snapshot via Acronis True Image Server. I save my OS on my C: drive and all my data files on my D: drive. So when I re-loaded my OS, I still have all of my music files intact.
I have re-loaded the OS before and had to re-create iTunes library which I did by doing the follwing:
1. cut & paste .xml file in iTunes folder to desktop
2. delete .itl file in iTunes folder
3. import .xml file through iTunes file>library>iport playlist
4. navigate to .xml file on desktop and import
This worked last time I re-loaded my OS but not this time for some reason.
So I'm wondering if there is a copy of the .xml file on the iPod itself in the iPod_Control folder that I can copy and paste to my comuter desktop and import via the above steps?
I have seen all kinds of solutions on the web that include copying the music files from the iPod to the computer. I don't need to do that. I have the music files. I just need the .xml file so iTunes can talk to my iPod (5th Generation - 30G).

Backup your music library, that is the only way to ensure it does not go missing through theft, damage, operator error, machine breaks, upgrades go wrong, operator goes wrong .........

Help on how to read the content of an XML file from the payload

I have a receiver channel / mail adapter, that sends e-mails with a XML attachment.
Im trying to write a Bean, that should make it possible to rename the attached XML file dynamically.
In the Bean I want to read the content of the attached XML file, it could be the order number.
The filename should then be Order number.XML.
Can anyone help me with how to read the content of the XML file from the payload.
Frank

hi,
check this: http://jakarta.apache.org/poi/

Hiding XML elements in the structure view – scripting influence to the structure view?

Hi
Is there a way to hide specific XML elements (really the elements and not the attributes) in the structure view?
I am asking this question to know if it is possible to influence the structure view by scripting.
Many elements are indeed used as a kind of help for constructions which have nothing to do with the actual contents especially in the case of tables.
You inflate the the structure view unnecessarily and the author will lose track of the real contents. It would be nice if there was a possibility to hide those help construction elements.
Thank you for any hints.
Regards
Apollo102

Hello Apollo,
There is a way to hide elements from the Structure View (one such method is offered by the free AXCM plug-in). What happens when you use AXCM (or other methods to hide elements) is that the elements get wrapped into hidden content. This might make the structure view less complex for your authors, but has a number of disadvantages and dangers.
1. The structure is normally invalidated, as the helper elements are usually required.
2. Accidentally deleting hidden content may make the invalidation permanent and render your documents useless.
It is NOT good practice to hide elements from authors in the structure view. Instead, you should either teach authors about the structure, or let them work in the Author View while adding sufficiently clear formatting to show them the underlying structure. In some cases, it might be better to create an authoring structure which is automatically transformed into the required full structure using an XSLT or other processing step. I have created a couple of such environments and they work fine. It just depends on the difference between the structure required for further processing and the structure that would be optimal for your authors (which in turn depends on the level at which your authors are experienced in working with structured content).
I hope this helps you solve your problem without having to tweak the structure view.
Kind regards
Jang

How to add exactly 2 NON XML caracters at the end of a SOAP body

Hello all I am trying to add two (and only two) extra non xml caracters "AA" at the END of a SOAP body using the JAXWS handlers as so:
HTTP/1.1 200 OK
Content-Type: text/xml;charset=UTF-8
Content-Length: 131
Content-Length: 131
Server: Jetty(7.x.y-SNAPSHOT)
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body></SOAP-ENV:Body></SOAP-ENV:Envelope>
AA
The problem is that if you try to add them to the SOAP body (see code below) you get a XML Unmarshalling exception. If I add "AA" as a soap attachment I get MORE than 2 caracters after the SOAP body (which I don't want)
Here is the my SOAPHandler code :
@Override
public boolean handleMessage(SOAPMessageContext mc) {
if (Boolean.TRUE.equals(mc.get(MessageContext.MESSAGE_OUTBOUND_PROPERTY))) {
try {
SOAPMessage message = context.getMessage()
String stringSoapMessage= getMsgAsString(message);
stringSoapMessage += "ss";
message.getSOAPPart().setContent((Source) new StreamSource(new ByteArrayInputStream(msg.getBytes())));
message.saveChanges();
context.setMessage(message);
} catch (Exception e1) {
return true;
public String getMsgAsString(SOAPMessage message) throws SOAPException {
String msg = null;
try {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
message.writeTo(baos);
msg = baos.toString();
} catch (Exception e) {
e.printStackTrace();
return msg;
so my question is this: is there any way to add exactly 2 non xml caracters at the end of the soap body using jaxws handlers ? I have spent several weeks on this so it is not an easy question...
Thanks,
Fred.

Yes I have done it using CFX interceptors. But the runtime dependencies needed were too big for this particular use. I mean having to use these:
apache/cxf/cxf-bundle/2.6.0/cxf-bundle-2.6.0.jar
org/apache/neethi/neethi/3.0.2/neethi-3.0.2.jar
wsdl4j/wsdl4j/1.6.2/wsdl4j-1.6.2.jar
/org/codehaus/woodstox/wstx-asl/3.2.4/wstx-asl-3.2.4.jar
org/apache/ws/xmlschema/xmlschema-core/2.0.2/xmlschema-core-2.0.2.jar
org/mortbay/jetty/jetty-util/6.0.2/jetty-util-6.0.2.jar
org/eclipse/jetty/jetty-util/7.5.4.v20111024/jetty-util-7.5.4.v20111024.jar
org/apache/geronimo/specs/geronimo-servlet_2.5_spec/1.1.2/geronimo-servlet_2.5_spec-1.1.2.jar
org/apache/geronimo/specs/geronimo-javamail_1.4_spec/1.7.1/geronimo-javamail_1.4_spec-1.7.1.jar
org/apache/geronimo/specs/geronimo-servlet_3.0_spec/1.0/geronimo-servlet_3.0_spec-1.0.jar
org/eclipse/jetty/jetty-http/7.5.4.v20111024/jetty-http-7.5.4.v20111024.jar
org/eclipse/jetty/jetty-server/7.5.4.v20111024/jetty-server-7.5.4.v20111024.jar
org/eclipse/jetty/jetty-io/7.5.4.v20111024/jetty-io-7.5.4.v20111024.jar
org/eclipse/jetty/jetty-continuation/7.5.4.v20111024/jetty-continuation-7.5.4.v20111024.jar
to add two caracters at the end of a soap message seems like over kill. If this is the only way to do this then i'll do it this way but it just seems like the implementation of the JAXWS API in JDK 6 seems inches away from being able to do this no ?
Thanks for the replies,
Fred

Possible to change the xml output of the Inbound Interface?

Hi All,
I hav a scenarion where a third party system receives the XML from XI. the output of the xml from XI looks as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
- <ns1:WMSItalyItemReplication xmlns:ns1="http://cpe.com/cpe_ftp_wms/ItemReplication">
- <item_dl dt_tm_created="2006-06-29 09:02:23">
- <item action="" owner_id="CIB" itm_num="3143832ZZ99">
<itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a />
<itm_udef_b />
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d />
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
</ns1:WMSItalyItemReplication>
</ns0:Message1>
</ns0:Messages>
And the output that the third party expects is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE item_dl SYSTEM "http://localhost/dtd/item_dl.dtd">
<item_dl><item><itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a></itm_udef_a>
<itm_udef_b></itm_udef_b>
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d></itm_udef_d>
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
Observe the first two lines of the second output.
I tried to generate the second xml using a java mapping. and it is working fine when i test it in the Interface mapping's test tab. but it is not working when i test the scenario end to end. It is giving some runtime error.
is it possible to change the namespace, etc in the output of the XML coming out of XI? if v change those namespace stuff, does XI recongnise the message and send it to the appropriate reciever?
Please suggest me any solution.
any help wud b greatly appreciated.

The first XML is a Split msg XML..Where there are multiple messages within a single XML document..Thats why u have a <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Tags..
Recheck what ur target system needs are & change ur mapping in XI.

Why the oracle XML parser "parses" the DTD comments?

Hi all,
I always use the header
<?xml version = '1.0' encoding='ISO-8859-1' ?>
to be able to use foreign characters in the XML documents.
The oracle xml parser handles this correctly.
My problem is, when I write comments inside the DTD, the
parser reports "Invalid UTF8 encoding".
Why the parser "parse" the comments? (protected by )
How do I say that the DTD encoding is different from UTF, like
ISO-8859-1?
Example of a correct DTD and corresponding XML, reporting
problems, related to the 2nd comment in the DTD specification,
written with ISO-8859-1 characters.
The DTD:

<!ELEMENT valid ( B, C ) >

<!ELEMENT B (#PCDATA) >
<!ELEMENT C (#PCDATA) >
The XML:
<?xml version = '1.0' encoding='ISO-8859-1' ?>
<!DOCTYPE valid SYSTEM 'valid.dtd'>
<valid>
How are you, Conceigco
<C>I'm fine, thank you.</C>
</valid>
The parser output:
[jgr@frontera test-dtd]$ java oracle.xml.parser.v2.oraxml -v
valid.xml
Error while parsing input sourcevalid.xml(Invalid UTF8 encoding.)
Thank you for any help.
Jorge Gustavo Rocha

I was wrong in saying that the attributes are not added to the element.My main aim is to add a array of elements to the root node.
Is there a efficient manner in adding the elements , rather than adding them individually with the help of appendChild method.
Thanks in advance.
null

Error while extracting XML file from the application server

Hi ,
I am writing a XML file into the application server, after which when i try to extract the file to the local server using the report - RFASLDPC ,
the file is extracted, but with a '#' symbol at the first position.
Because of which the XML File does not open. But after i open the file in notepad and manually delete the '#' symbol and then reopen the file, it works fine.
Is there any way to remove the '#' symbol while extracting itself ??
Thanks in advance,
Vikas.

Select the option "No Character Set Conversion" in stead of Code page 1100.
However, I still have troubles -> the downloaded xml file misses a space on several places. This causes errors too.

Org.xml.sax.SAXParseException: The markup in the document preceding the roo

Below is the XML we are using to parse:
<?xml version="1.0" encoding="UTF-8"?>
<ead><archdesc level="class">desc</archdesc><eadheader audience="internal"><eadid>eadid23456</eadid></eadheader></ead>
The application throws the exception:
org.xml.sax.SAXParseException: The markup in the document preceding the root element must be well-formed.
 at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1189)
 at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
 at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:152)
 at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
 at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
 at gov.nysed.vrc.xml.FAHandler.parse(FAHandler.java:44)
 at gov.nysed.vrc.web.actions.FAEditorDispatchAction.validateFA(FAEditorDispatchAction.java:857)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)...
I tried using several editors and online XML syntax checkers. None of them complained. Also I tried removing the newline character or any spaces in the document. Didn't help either. I read in some of the forums that Xerces could be picky about spaces but even without any spaces, I am getting this exception.
We are using Weblogic 8.1 and the default parsers... Any help is appreciated. - Thanks...

The Java API documentation (the bit about character encodings) mentions "ISO-8859-1" but not "ISO8859-1". Try that instead?

Org.xml.sax.SAXParseException: The prefix "c" for element "c:set" is not bo

Hi,
When deploying the ADF aaplication in glassfish server getting error like,
[#|2012-12-03T14:21:53.586+0530|INFO|glassfish3.1.2|oracle.j2ee.jsp|_ThreadID=22;_ThreadName=Thread-2;|unable to dispatch JSP page: The following exception occurred:.
oracle.jsp.parse.JspParseException:
Error: Validator com.sun.faces.taglib.jsf_core.CoreValidator reports:
org.xml.sax.SAXParseException: The prefix "c" for element "c:set" is not bound.
 at oracle.jsp.parse.OracleJsp2Java.reportValidationMsgs(OracleJsp2Java.java:777)
 at oracle.jsp.parse.OracleJsp2Java.invokeValidator(OracleJsp2Java.java:755)
 at oracle.jsp.parse.OracleJsp2Java.checkJspTagLibValidator(OracleJsp2Java.java:653)
 at oracle.jsp.parse.OracleJsp2Java.transformImpl(OracleJsp2Java.java:522)
 at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:593)
 at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:691)
 at oracle.jsp.runtimev2.JspPageCompiler.compileBothModes(JspPageCompiler.java:490)
 at oracle.jsp.runtimev2.JspPageCompiler.parseAndGetTreeNode(JspPageCompiler.java:457)
 at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:624)
 at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:645)
 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:385)
 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:810)
 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:734)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:770)
 at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1542)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
 at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
 at org.apache.catalina.core.ApplicationDispatcher.doInvoke(ApplicationDispatcher.java:807)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:671)
 at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:505)
 at org.apache.catalina.core.ApplicationDispatcher.doDispatch(ApplicationDispatcher.java:476)
 at org.apache.catalina.core.ApplicationDispatcher.dispatch(ApplicationDispatcher.java:355)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:305)
 at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:546)
 at javax.faces.context.ExternalContextWrapper.dispatch(ExternalContextWrapper.java:93)
 at javax.faces.context.ExternalContextWrapper.dispatch(ExternalContextWrapper.java:93)
 at oracle.adfinternal.view.faces.config.rich.RecordRequestAttributesDuringDispatch.dispatch(RecordRequestAttributesDuringDispatch.java:44)
 at javax.faces.context.ExternalContextWrapper.dispatch(ExternalContextWrapper.java:93)
 at javax.faces.context.ExternalContextWrapper.dispatch(ExternalContextWrapper.java:93)
 at javax.faces.context.ExternalContextWrapper.dispatch(ExternalContextWrapper.java:93)
 at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:167)
 at com.sun.faces.application.view.JspViewHandlingStrategy.executePageToBuildView(JspViewHandlingStrategy.java:363)
 at com.sun.faces.application.view.JspViewHandlingStrategy.buildView(JspViewHandlingStrategy.java:154)
 at org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ChangeApplyingVDLWrapper.buildView(ViewDeclarationLanguageFactoryImpl.java:341)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:990)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:342)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:236)
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:509)
 at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1542)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
 at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
 at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
 at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
 at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
 at com.ge.ohr.dm.ui.sessionHandler.GEDMSessionExpiryHandler.doFilter(GEDMSessionExpiryHandler.java:61)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
 at com.ge.ohr.dm.ui.filter.GEDMSecurityFilter.doFilter(GEDMSecurityFilter.java:173)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
The code which in .jspx page is like;
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:c="http://java.sun.com/jsp/jstl/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns="http://www.w3.org/1999/xhtml">
<c:set var="gedmuiBundle" value="#{adfBundle['com.ge.ohr.dm.ui.UIBundle']}"/>
When including the 'xmlns:c="http://java.sun.com/jsp/jstl/core' it shows the error;
The server encountered an internal error (OracleJSP error: oracle.jsp.parse.JspParseException: Error: Validator com.sun.faces.taglib.jsf_core.CoreValidator reports: org.xml.sax.SAXParseException: The prefix "c" for element "c:set" is not bound. ) that prevented it from fulfilling this request.
Please help me on this.
Thanks and Regards
Binsy

This is an ADF application, so you will probably find more help in the JDeveloper and ADF forum here:
JDeveloper and ADF
Best Regards,
Chris

Not able to open XML file in the application server..........

Hi,
I have downloaded a XML file to the application server.....
File is created but i am not able to open the file there....
Plz advice ....how to open it.....
Regards.

Use Notepad. Drag and drop in notepad.
Aman

5.x to 4.5 xml horror...oh the horror

Similar Messages

Maybe you are looking for