50.1 & 50.6 Fuser error HP LaserJet 9040N

I get a 50.1 & a 50.6 Fuser error on my HP laserjet 9040N pritner. I recycle power & remove fuser & error go away I then print but next day error come back & I do the same thing again any idea here??

After each print job I get the message on printer screen "Engine error press [OK]" It will print again only after pushing Ok button. Is there a fix? HP printers have not been that reliable, I 'm will not buy onother if this cannot be fixed.

Similar Messages

HP Laserjet M2727nf Fuser error

I installed a HP Laserjet M2727nf printer on my HP LE1901w computer using windows 7 and it is always telling me fuser error when I want to print a document. I have to off and on it several times before it prints. What do I do?

Send it to the service for fuser replacement ... hint: ask for the price first ;-)

Fuser error for HP Color LaserJet 3600 Series Printer

My HP Color LaserJet 3600dn Printer have Fuser error message. What is the problem ?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also view the article related to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Fuser Error code 50.1 on hp colour laserjet 4700dn

Fuser Error code 50.1 on hp colour laserjet 4700dn. what should i do

50.1 error message indicates a fuser under-temperature error. The fuser did not reach the correct operating temperature during the warm up process causing a 50.1 error. This could indicate a problem with the power source or it could be paper stuck in the fuser if the 50.1 error follows a paper jam.
To resolve the fuser error, try troubleshooting steps given in below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl11838

50.2F.00 fuser error

I have a LaserJet M4555 MFP with a fuser error code of 50.2F.00. The screen says to turn it off, then back on and if the issue persists, to call a tech. Well, I have tried turning it off and back on. I tried booting it without the network cable. I even replaced the fuser. And I still have the error. Any ideas on how to fix it without throwing parts at it?

This is a low or no temp error. If the fuser has indeed been replaced with a known working fuser and still have the same error, then the next step to to check all the connections for the fuser as indicated below:
W = 2: Reconnect the connectors (J53, J54 and J82) on the DC controller PCA.
3. Replace the fuser.
4. W = 2: Reconnect the connector (J62) on the low-voltage power supply PCA.
5. If the error persists, replace the low-voltage power supply.

4350dtn 50.2 Fuser Error

Hi,
I work in a firm, we have around 60 or 70 4350s. I've got one priner which returned a 50.2 Fuser Error, so I replaced the fuser. A few days later and the error is back.
I have taken a fuser out of another printer and placed it in for now, but I'm half expecting this one to go wrong in a couple days now.
Is there anything which could be casuing the printer to damage the fusers?
Thanks,
Dave

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

50.7 Fuser Error Message

What is a 50.7 fuser error message on a laserjet 1525nw ?
This question was solved.
View Solution.

Hi jb2012d,
The product has experienced an error with the fuser unit. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If you still receive the message follow the steps below.
1. Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you still have the messages continue with next step.
2. Turn off the product, wait at least 25 minutes, and then turn on the product.
3. If the message persists, contact HP support.
Understanding Control Panel Messages
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

50.5 Fuser Error with new fuser installed

Our HP Color LazerJet CP6015 Printer stopped working because of a "50.5 Fuser Error". We ordering and installing a new Image Fuser Kit (220v) but it still shows the same error message. Anyone have any ideas how to fix the problem?

Hi,
You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
Find it with the link below.
http://h30499.www3.hp.com/
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Fuser Error

I have a CP1518ni, that has only been used lightly for two months. It was brand new in October and was not used after December 2009. There is now a "fuser error" that won't reset after following all the tips in the support site. So far. we have tried the power off, then off again for 30 mins. Tried plugging directly into the wall. Tried a different room, and still the same error. the troubleshooting tree says contact support, so here I am.

50.1 error message indicates a fuser under-temperature error. The fuser did not reach the correct operating temperature during the warm up process causing a 50.1 error. This could indicate a problem with the power source or it could be paper stuck in the fuser if the 50.1 error follows a paper jam.
To resolve the fuser error, try troubleshooting steps given in below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl11838

50.7 fuser error

I receive the 50.7 fuser error message. We have followed the guidelines found in the blog. Plug directly into wall, unplug and wait 30 minutes, even waited 24 hours, etc.
When plugged back in error message disappears and we can print a few times and then error message reappears.it seems to print fine until the error message appears.
What can be done to fix this permanently?

Hi @Swahealy ,
I see that you keep getting a fuser error. It will print a few times and then the error comes back again. I would be happy to help you.
This error message refers to the printer having experienced an internal hardware error.
This is probably the document you have already tried to resolve this issue. A 'Fuser Error' Displays on the Computer, and the Printer Does Not Print.
The only other information I could find for this fuser error, is after getting the error, to turn the printer turned Off for 3 mins and then turn it back ON to see if the printer will resume printing.
If the issue persists, unfortunately the printer will need to be serviced.
If you need further assistance, please let me know the following information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problem With HPLaserJetP1102w: Fuser Error

I recently bought the HP LaserJet P1102w and in the beginning it worked perfectly. I printed something last Wednesday but when I got home yesterday, my printer didn't work and i get a hardware error. It claims to be a fuserfault. Is there anything I can do? I tried removing the toner and placing it back. I tried to unplug everything and plug things back in, i tried reinstalling the printer. Nothing seems to work. I have no idea what went wrong. Nothing I do seems to help. The printer is brand new and I only printed three times with it. Please tell me there is a solution

Hello Lilly777,
The fuser will fix your toner to the media (paper), this is done with some heat. It might be a power related issue, in case there is not 'enough' power to reach a specific temperature.
Please check this document: "The Printer Will Not Turn On or Respond" - Solution two and four. Just to be sure everything is fine with the power supply.
Another option would be Restoring the Factory Default Settings.
Hope this help.
Regards,
AndOne
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Engine error HP LaserJet 100 color MFP M175 PCL6 wireless

Hi folks,
I would like to help with the "engine error" you're experiencing. I would like you to download the HP LaserJet Pro Series Firmware Update Utility. With this utility we can install a firmware update for the printer hardware. Please read all the steps below before clicking the above link. If you are using a mac operating system Click here instead.
Flash Firmware Update Notes:
The Firmware Update Utility uses the USB connection to the printer.
The HP LaserJet 100 color MFP M170 series print driver software must be installed prior to using this utility.
The HP LaserJet 100 color MFP M170 series printer must be on and in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.
Depending on the processor speed of your pc, the firmware update process may complete on the printer before the update status progress bar in the flash firmware update utility on the pc screen completes, this is normal.
Once the update process has started, do not use your pc for any other activity until the process is complete.
Do not power cycle the product or the pc until the firmware update process is complete
Steps to take :
1. Download the flash firmware updater file by clicking the appropriate link above. (The first link is for Windows operating systems and the second is for Mac)
2. Turn the printer off and then back on to clear main printer memory.
3. Double click on the file M170_colorMFP_Series_FW_Update-20111021.exe flash firmware update utility file. An HP firmware update window will open.
4. Select the appropriate HP M170 MFP series driver in the dialog window. If you assigned a different name to the HP M170 MFP, choose the name that represents the correct printer.
5. Click on ""Send Firmware"" when ready to proceed.
6. The progress bar will begin to move to the right indicating information being transferred.
7. DO NOT power cycle the product or the pc during this process or the product may become unstable and or unusable without further attention from HP. The flash firmware update can take up to 5 minutes to complete. Please be patient.
8. During the product flash firmware update, the display on the product control panel will display ""Printing Document- Erasing - Programming - Complete - Hewlett-Packard - Ready - Initializing - Ready"". Once the download is finished the printer will be in the Ready state.
9. At the conclusion of the firmware update, the dialog window will show a smiley face. Click on exit.
10. The flash firmware update process is complete
Please let me know if this resolves the issue and/or if you would like further assistance.
Sunshyn2005

After each print job I get the message on printer screen "Engine error press [OK]" It will print again only after pushing Ok button. Is there a fix? HP printers have not been that reliable, I 'm will not buy onother if this cannot be fixed.

Critical error: HP LaserJet 100 color MFP M175 Series - Please give me a solution to this problem.

I am having a problem trying to install a new printer. As an administrator on a active directory domain on a Windows XP machine; when I go to install the software on the HP LaserJet Pro 100 Color MFP M175nw CD with serial number CE866-60105 v1.1, the installation which says "product has been detected - waiting for product setup to finish. This may take several minutes..." takes about ~40min to go through the installation. After this time passes the installation progress bar gets to 99% and then it says "Error - An install operation took too long to execute. This is a fatal error preventing product use. Please restart your computer and run the installer again. If the problem persists, please check the product support web site for your product.
I've attached this error screen to this post. What do I need to do to get this printer installed?
Thanks,
Jeremiah O'Neal - NST
[email protected]

Hi Mario,
I have a similar installation error like Jeremiah-NST.
I was sucessful installing CD setup on my Dell XPS Laptop but have spent 2 days trying to go through the same installation process on my Toshiba Satellite laptop.
i'm using the setup Hp printer cd to do the installation on the computer hence the same error post like the one of Jeremiah-NST.
please assist.
Eben

Printing error on Laserjet 4200 PCLXL with Adobe Reader 8.1.2

While printing on our HP LaserJet 4200 with Adobe Reader 8.1.2, here is the error printed by my printer:
PCL XL error
Subsystem: KERNEL
Error: IllegalOperatorSequence
Operator: SetPageScale
Position: 3
I use PCL6 driver and if I use the PCL5 one, I only get a portion of my 11/17 pdf. The PS driver seams to be OK. I didn't have this problem in Adobe Reeader 7.0.8. And I don't have this problem on older LaserJet printers (4000 or 4100) or newer's (4250).
With PCL 5 or Post Script, it kinda print, but Adobe Reader is not able to get the write size of paper. If I have a 8½/14 or 11/17 document, It can only print in 8½/11 correctly unless I go in printer properties and select manually the size of paper that I want to print on (or the size of the document). I can't keep that resolution because it's to difficult for most users and that they'll keep asking why their document doesn't print in the format it was built in.
Also, with PCL6, when I choose the write size of paper in the printer's properties, it prints correctly.
I tried to update the driver on our server, but the paper type of all our 4200 switched to "Etiquette" and we didn't want to pass on all our computers to reconfigure it back to "Normal paper". I also tried to update the firmware on another of our 4200s, but the problem persisted.
Can you help me to find out what's going on in Adobe Reader 8.1.2 and how I can solve that problem??

Hi,
We are also struggling with the same problem after upgrading the portal to NW04s SPS15. It is consuming 2 to 3 min for opening the PDF form in ESS under Travel & Expenses.
We are also with same version of Adobe i.e.8.1.2
Still waiting for the solution,
Regards,
Venu

Ready 2 download error on Laserjet pro 200 color m251n printer

I have a laserjet pro 200 color m251n printer that suddenly gives "error 2 download" can anyone profer solution on how to clear this error.
I tried using the firmware downloaded from hp site but gives "Fatal erro 7 while erasing.
Please somebody help me. It's very urgent.

Hi Seun1965,
I see you are getting an "error 2 download" message and can not complete the firmware update. Please complete the steps in the following document; A 'Firmware Corrupt Ready 2 Download' Error Message Displays on the Control Panel.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c03109721.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. Even if the printer is out of warranty I suggest still calling HP to see if there is something they can do to help.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

50.1 & 50.6 Fuser error HP LaserJet 9040N

Similar Messages

Maybe you are looking for