50.7 Fuser Error Message

What is a 50.7 fuser error message on a laserjet 1525nw ?
This question was solved.
View Solution.

Hi jb2012d, 
The product has experienced an error with the fuser unit. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If you still receive the message follow the steps below.
1. Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you still have the messages continue with next step.
2. Turn off the product, wait at least 25 minutes, and then turn on the product.
3. If the message persists, contact HP support. 
Understanding Control Panel Messages
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Fuser error for HP Color LaserJet 3600 Series Printer

    My HP Color LaserJet 3600dn  Printer have  Fuser error message.  What is the problem ?

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    You can also view the article related to this product here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • 50.7 fuser error

    I receive the 50.7 fuser error message. We have followed the guidelines found in the blog. Plug directly into wall, unplug and wait 30 minutes, even waited 24 hours, etc.
    When plugged back in error message disappears and we can print a few times and then error message reappears.it seems to print fine until the error message appears.
    What can be done to fix this permanently?

    Hi @Swahealy ,
    I see that you keep getting a fuser error. It will print a few times and then the error comes back again. I would be happy to help you.
    This error message refers to the printer having experienced an internal hardware error.
    This is probably the document you have already tried to resolve this issue. A 'Fuser Error' Displays on the Computer, and the Printer Does Not Print.
    The only other information I could find for this fuser error, is after getting the error, to turn the printer turned Off for 3 mins and then turn it back ON to see if the printer will resume printing.
    If the issue persists, unfortunately the printer will need to be serviced.
    If you need further assistance, please let me know the following information.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    Please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Receiving a false paper jam error message for a 6310 all in one printer

    I have an hp 6310 all in one printer.  It is showing a false paper jam error message with no paper in the printer.  I have tried all  of the fixes that have been suggested on the website as well as on you tube to no avail.  Nothing works, I have cleaned all of the parts that have been suggested to clean and reset the printer. I am still receiving the same paper jam message with no paper in the printer.  Does anyone have any suggestions to try to fix this printer. 

    Do you here any clicks or other sounds when the 6310 first starts up?
    I'm trying to fix false paper jam error on Sharp Fax/copier,F0-4450.
    When researching the problem, found suggestion that a bad solenoid could cause that error. 
    After completely disassembling the copier found that wasn't the problem.
    I here 2 clicks during start up that sounds like gear slipping a tooth, as if something is preventing a shaft from turning.
    Back to the drawing board.
       UPDATE!!! Took fuser out, turned gears with screwdriver til 81/2x11 paper went thru, lubricated ends of fuser roller with powdered graphite lube.
    3 page fax came thru.

  • 50.5 Fuser Error with new fuser installed

    Our HP Color LazerJet CP6015 Printer stopped working because of a "50.5 Fuser Error". We ordering and installing a new Image Fuser Kit (220v) but it still shows the same error message. Anyone have any ideas how to fix the problem?

    Hi,
    You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
    Find it with the link below.
    http://h30499.www3.hp.com/
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Photosmart C5280 Error Message

    Aloha!
    Hopefully someone can help me;
    I have an error message which says in the title: "Printer cartridges" then in the text says "Refer to printer documentation".
    Very frustrated as to it's vagueness but I checked in the back and there was bits of a terminated piece of A4 jammed in there. Got out all I could find and switched it back on to find it was no longer making a grinding noise, but it still had the same error message. I haven't tried new cartridges yet since I think the fuser might be damaged by the paper jam/un-jam but just wanted to check on with people who know about printers! :3
    If anyone can give me a little bit of insight as to what's going on inside my printer I'd be much appreciative.

    I have this same problem.
    I am using genuine HP cartridges.  Have them in the right places.  Don't have any tape or foreign material on them.  Have the right type of cartridges (74 and 75) and I even replaced the color cartridge because I knew it was getting low on ink.  I am still getting the message "Printer Cartridges"  "Refer to Printer Documentation".   For the past few days I've been emailing what I need to print to myself so I can print it from my husband's desktop to his printer but I won't continue long,  If I can't get this solved soon, the printer's going to the landfill and when I replace it, I'll think twice about what brand printer to replace it with because this printer has been the most annoying HP printer I've ever owned and I have owned MANY HP printers over the years. 

  • Hp 8100 fuser error 50 service

    If you change a fuser in the 8100 and the problem comes right back, still getting 50 service error. I found that the problem is the low voltage power supply, it is connected to the fuser and if just changing the furser doesn't work, this is the problem, the book will tell you dc controller, but it is definately the low voltage power supply, seems to be a common problem with 8100's. I've had this repair happen in the field on countless occasions.
    This question was solved.
    View Solution.

    Hi lazrprnt,
    When you get a 50 error on the 8100 it could be any of the three parts causing the problem. Note that the fuser is the first part that most commonly will cause the 50 error, and then the DC controller. The low voltage power supply usually is the last possible problem. Do you still have an issue with the printer having the 50 error message or have you gotten it taken care of?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Fuser Error

    I have a CP1518ni, that has only been used lightly for two months. It was brand new in October and was not used after December 2009. There is now a "fuser error" that won't reset after following all the tips in the support site. So far. we have tried the power off, then off again for 30 mins. Tried plugging directly into the wall. Tried a different room, and still the same error. the troubleshooting tree says contact support, so here I am.

    50.1 error message indicates a fuser under-temperature error. The fuser did not reach the correct operating temperature during the warm up process causing a 50.1 error. This could indicate a problem with the power source or it could be paper stuck in the fuser if the 50.1 error follows a paper jam.
    To resolve the fuser error, try troubleshooting steps given in below link:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl11838

  • Fuser Error code 50.1 on hp colour laserjet 4700dn

    Fuser Error code 50.1 on hp colour laserjet 4700dn. what should i do

    50.1 error message indicates a fuser under-temperature error. The fuser did not reach the correct operating temperature during the warm up process causing a 50.1 error. This could indicate a problem with the power source or it could be paper stuck in the fuser if the 50.1 error follows a paper jam.
    To resolve the fuser error, try troubleshooting steps given in below link:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl11838

  • 50.1 & 50.6 Fuser error HP LaserJet 9040N

    I get a 50.1 & a 50.6 Fuser error on my HP laserjet 9040N pritner.  I recycle power & remove fuser & error go away I then print but next day error come back & I do the same thing again any idea here??

    After each print job I get the message on printer screen  "Engine error press [OK]"  It will print again only after pushing Ok button.  Is there a fix?  HP printers have not been that reliable, I 'm will not buy onother if this cannot be fixed.

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • Error message into a Variable.

    Dear users,
    I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
    My requirement is like this:
    I have a message class in which I want to define a text 'Employee number & not found'.
    I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
    So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
    lv_text = e0xx(messageclass) USING '1234'   which stores the text 'Employee number 1234 not found' in lv_text.
    How would I acheive it??
    Thanks, V!

    Try tis way
    message e999(00) with i_emp-empno into lv_text.
    press f1 in message will provide you more details
    a®

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

  • Error message iPod cannot update b/c all of the playlists no longer exist

    Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
    PC   Windows XP  

    hiya!
    And my playlists are still on the left side in my iTunes. They do exist.
    let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
    is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
    love, b

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

Maybe you are looking for