50% discount for all Pro using FCP Studio/Sever!

I am a FCP Studio Pro user since version 1.0. I am have buy/download from the APP Store the new FCP X due to the numerous BAD ratings and publicity. I urge Apple to allow all FCP Studio/Server Pro users to buy FCP X at 50% discount in order to encourage them to try and play with the new FCP...

I was just looking at old reciepts the cheapest I can find is the 2003 upgrade that was just FCP.    $300 is pretty cheap.
2010:
FC STUDIO UPGRADE-INT      $299.00
back in 2005:
M9912Z/A FINAL CUT STUDIO UPGRADE      580.20
back in 2003:
M9039Z/A     FINAL CUT PRO 4 UPGRADE FROM FC3 199.50

Similar Messages

New dual mac pro using fcp studio doesn't see external crt monitor

I recently invested in a system to re-edit film and set up my system...dual editing up is fine I put my larger dell monitor through the 3870 which is in bay one and the browser comes up on the 2nd monitor connected to the 2600 in bay 2.
The problem is I can't get my EXTERNAL VIDEO out go to the crt monitor...this is connected by svideo that's on the 3870 which my primary monitor is connected to. Under "video playback" there's no option to choose "apple firewire" the only thing on that menu is the "digital cinema desktop preview" and only those choices, the same under my audio/video settings under the "final cut pro" menu. Theres no option I see on here either for mirroring under the playback menu either am I looking in the wrong place?
This appears to be a software issue as I'm not seeing the other options under video playback to even recognize the dv connection to my primary monitor...I've seen commentary in other logs to try deleting preferences but which ones?
The crt monitor is seen under my apple hardware, I can move things in and out of it...only in final cut pro I can't get external monitor on it...and when I choose this cinema choice the picture comes up on my main monitor but only as a still it doesn't seem to allow me to choose "all frames" in any case.
My main concern right now is to get this external monitor to be read by final cut PLEASE HELP thanks!

Got the "apple firewire ntsc" choice to show up even if grayed out and "missing" under "audio/visual" menus by recreating choices in Easy Setup under "final cut pro" MENU thank GOODNESS because I was reading horror stories on here about this under another thread with someone trashing preferences, reinstalling and the works and still not getting it to show up...on my search now for an analog/digital converter up at b&h...find it odd that the s video connector wouldn't show the crt monitor when I put both displays through the 3870...I switched it back to see if it worked again when only the one dell monitor display was there and there it is again mirroring the screen display on my desktop...just can't be seen as an "external monitor" in fcp...couldn't find anything specific in the shane ross threads to this. I'm sad the program doesn't just see the s video connection though the 3870 though my computer does fine and will query up at b&h in regard to what might be affordable as far as a digital/analog converter. It's also weird in itself that when I put the two dell monitors on the one card my computer no longer could see the s video crt connection...makes no sense. Will report in later as to what I discover up at b&h as I'm sure there's a world of people out there using this sony crt monitor still even into the upgrades with computers and software so I imagine therein lies the solution. Thanks again and I'll report in as to what hardware might be suggested for me.

Mac Pro and FCP Studio

Hi,
Will the New Mac Pro ( 3 GHz) be faster than my Quad 2,5 for normal rendering in FCP Studio ?
thanks

Should be.
They suggest that it is up to 1.4x faster encoding Mpeg2 (from DV)
http://www.apple.com/macpro/performance.html

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

Material creation for All VIEW using BAPI Function modules

Dear All,
             I want to create materials for all views using BAPI F.Ms. By using BAPI_MATERIAL_SAVEDATA i have extended materials for for only specified views. now my requirement is to create Material with All views including Classfication view also. For this i found BAPI_OBJCL_CREATEFM.
         Tell me that shall i use both Fm's at time to create material.Will it work? According to my knowledge we need to create Characters first ,then we should assign this character to this class, then while creation of material we should select this class .
        so pls guide me the procedure to follow for both FM's .
Note : Pls don't suggest me LSMW OR BDC procedure.
regards,
Prashanth Maturu.

Hi prashanth,
U can use both the FM. using BAPI_MATERIAL_SAVEDATA u can create all the views and for classification view use BAPI_OBJCL_CREATE. before assigning class to material u hve to make sure that the characteristics are uploaded and is attched to the class using transaction CL03.
Regards,
Anil N.

2g data allowance in single line plan is only for 4g LTE or for all data using?

I got a single line plan and an iPhone 5s a couple days ago. I am confused the data allowance is for 4g LTE only or for all data using? Thank you!

Hello edsun1997
I would love to answer this for you. You have 2 GB's to use on our network this will start over at the beginning of your cycle. If you use Wifi and turn off our network, Wifi would not go against that 2 GB bucket.
JoeL_VZW
Follow us on Twitter @VZWSupport

Is it possible to mass change desktop wall paper for all users using WGM?

is it possible to mass change desktop wall paper for all users using WGM?

yes, it's easy - change a machine to the desktop you want (the image must be on all the machines, with the same name, of course), find ~/library/preferences/com.apple.desktop.plist Copy that to your server (or just put it on a flash drive) In workgroup manager select preferences - details - "add". Navigate to that plist. (Optional - hit "edit" and cut and past from "often" to "always", then the user cannot change the desktop at all, if you leave it in "often" it will reset next log-on.)

How does select stmt with for all entries uses Indexes

Hello all,
I goes through a number of documents but still confused how does select for all entries uses indexes if fields are not in sequences. i got pretty much the same results if i take like two cases on Hr tables HRP1000 and HRP1001(with for all entries based upon hrp1000). Here is the sequence of index fields on hrp1001 (MANDT, OTYPE, OBJID, PLVAR, RSIGN, RELAT, ISTAT, PRIOX, BEGDA, ENDDA, VARYF, SEQNR). in second case objid field is in sequence as in defined Index but i dont see significant increase in field even though the number of records are around 30000. My question is does it make a differrence to use field sequence (same as in table indexes) in comparison to redundant field sequence (not same as defined in table indexes), secondly how we can ge tto know if table index is used in Select for entries query i tried Explain in ST05 but its not clear if it uses any index at all in hrp1001 read.
here is the sample code i use to get test results.
test case 1
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
      t2 TYPE timestampl,
      t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
            WHERE mandt EQ sy-mandt AND
                  plvar EQ '01' AND
                  otype EQ 'S'AND
                  istat EQ '1' AND
                  begda <= sy-datum AND
                  endda >= sy-datum AND
                  langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
            FOR ALL ENTRIES IN it_hrp1000
             WHERE mandt EQ sy-mandt AND
                    otype EQ 'S' AND
*                    objid EQ it_hrp1000-objid and
                    plvar EQ '01' AND
                    rsign EQ 'B' AND
                    relat EQ '007' AND
                    istat EQ '1' AND
                    begda LT sy-datum AND
                    endda GT sy-datum and
                    sclas EQ 'C' and
                    objid EQ it_hrp1000-objid.
*                    %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.
test case 2
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
      t2 TYPE timestampl,
      t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
            WHERE mandt EQ sy-mandt AND
                  plvar EQ '01' AND
                  otype EQ 'S'AND
                  istat EQ '1' AND
                  begda <= sy-datum AND
                  endda >= sy-datum AND
                  langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
            FOR ALL ENTRIES IN it_hrp1000
             WHERE mandt EQ sy-mandt AND
                    otype EQ 'S' AND
                    objid EQ it_hrp1000-objid and
                    plvar EQ '01' AND
                    rsign EQ 'B' AND
                    relat EQ '007' AND
                    istat EQ '1' AND
                    begda LT sy-datum AND
                    endda GT sy-datum and
                    sclas EQ 'C'." and
*                    objid EQ it_hrp1000-objid.
*                    %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.

Mani wrote:
Thank you for your answer, its very helpful but i am still nor sure how does parameter rsdb/max_blocking_factor affect records size.
Hi,
The blocking affects the size of the statement and the memory structures for returning the result.
So if your itab has 500 rows and your blocking is 5, the very same statement will be executed 100 times.
Nothing good or bad about this so far.
Assume, your average result for an inlist 5 statement is 25 records with an average size of 109 bytes.
You average result size will be 2725 byte plus overhead which will nearly perfectly fit into two 1500 byte ethernet frames.
Nothing to do in this case.
Assume your average result for an inlist 5 statement is 7 records with an average size of 67 bytes.
You average result size will be ~ 470 byte plus overhead which will only fill 1/3 of a 1500 byte ethernet frame.
In this case, setting the blocking to 12 ... 15 will give you 66% network transfer performance gain,
and reduces the number of calls to the DB by 50%, giving additional benefit.
Now this is an extreme example. The longer the average row length is, the lower will be the average loss in the network.
You have the same effects in memory structures, but on that layer you are fighting single micro seconds instead of
hundreds of these, so in real life it is rarely measurable.
Depending on table-statistics, oracle might decide for short inlists to use a concatanation instead of an inlist.
This is supposed to be more costy, but I never had a case where I could proove a big difference.
Values from 5 to 15 for blocking seem to be ok for me. If you have special statements in customer coding,
it #might# be benefitial to do the mentioned calculations and do some network tracing to see if you can squeeze your
network efficiency by tuning the blocking.
If you have jumbo frames enabled, it might be worth to be analyzed as well.
If you are only on a DB-CI system that is loopback connected to the DB, I doubt there might be a big outcome.
Hope this helps
Volker

ICM active -- NO CONNECTION for all AppServers (using TREX host names / IP

Hi Experts,
Our Basis team has set up new BWA Box for a Quality. When i went to a transaction "RSDDBIAMON" I am getting below error.
Q27: ICM active --> NO CONNECTION for all AppServers (using TREX host names / IP addresses). Configure ICM/TCM connection in SAP
RFC Connection is working. I have tested it in sm59. Can anyone help to understan where will be the problem.
Regards,

In TREX Admin, I was able to check ICM error and got IP address.. After this got to know host-name of the server is different from configured in ICM.

Just curious: What do you all guys use FCP for?

Just wondering.
Does everybody work in TV or production companies. FCP is such a powerful tool... Only people working for TV networks and cables use it, right?

Sometimes it's used as a paperweight, sometimes it's used as a room heater. And sometimes I use it as my personal hair stylist, it gives me this little "gray" highlights! So many uses!
Back to your question, not necessarly. I've used it for Feature Films. I've worked on shows that were all offlined of FCP and Finished on Final Cut. some of them do their VFX I/O through Final Cut.
I've done work on 2 Feature Films on FCP. Blonde and Blonder and Christmas in Wonderland. So it goes beyond television and news.

How to get a list of file paths for all files used in a project

I have a project in Premiere Pro CC which has a large number of bins. A sequence in one of these bins uses files from other bins. I am trying to find the locations of all each of the files used in the project.
1) Obviously I can select each clip in the timeline and show in finder, but there a lot of clips
2) The video usage associated with each file in the project would help. However
1. I haven't found a way to display only clips that have video useage if all of the bins have not been expanded.
2. Video usage shows usage for all sequences, so one would have to manually check the pull down for each file to see if it is used in the sequence in question.
3) I tried exporting the project to final cut pro xml. The path url gives me the information that I need. For some reason, however, when I do the export only one clip's information is there, not the information for all of the other clips in the project.
4) I tired an export for speedgrade and all of the file names are there. However the paths are not.
Basically I want to find all of the files in the project and relocate them to a specific folder for that project. There's got to be a way to do this but I'm not seeing it ....

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

Creating the best RAID setup for my MacPro using FCP

I have a MacPro, 2 x 3GHz Dual Core, 16GB ram, 4 x 500GB drives and I work in FCP 5.1.4 and with my Hardware setup I feel it should be faster and I've been wanting to set up a RAID but not sure how to do it, or the best way way to do it.
Out of the 4 drives I have, Drive one is my main drive (boot drive, apps etc.) Drives (2 & 3) which is a TB combined, I'd like to turn those into a RAID) to speed up rendering, editing etc. In FCP and Motion. Drive 4 is where I keep all my working files.
My files are backed up regularly onto external harddrives and kept offsite.
Can I leave everything I have on my entire system the way it is and just turn Drives 2 & 3 into a RAID that's best for this application? People who work in VIDEO I know do this all the time to speed things up but I can't find the steps for the best way to do this. Bits and pieces all over the place but I can't put this puzzle together.
Can you point me in the direction in how to do this?
As I'm doing this is there anything I should be careful about?
Please help me understand this process.
Just in case you need to know what kind of drives I have here's the info:
Capacity: 465.76 GB
Model: ST3500641AS P
Revision: 3.BTA
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Bay Name: "Bay 1"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Startup Drive:
Capacity: 465.44 GB
Available: 367.86 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /

My advice would be 'yes' to what you are saying... with the exception of the Softraid stuff - not that I think its wrong, but I've never used it, so I can't comment if you need it or whether the Mac OSX raid is sufficient - but others here say they prefer it so fair enough. You can see some comparisons here http://www.amug.org/amug-web/html/amug/reviews/articles/softraid/351/
amug always have indepth benchmarks of stuff.
I wouldnt call myself an FCP guru, but I think that your suggestion of putting the FCP scratch disk and client, video files on the raid are the best idea. The scratch folder is essentially where the temp-rendered clips go, so its audio and video - you want that folder to be on a really fast volume. You also want your source video files to be on a really fast volume, so they can be streamed fast enough to play in realtime too when playing unrendered areas, or building a preview.
Some might say in FCP you get bast performance when your scratch disks and video files are on seperate disks. Thats totally true, so it can read from one disk and write to the other at the same time. But in your case you have a 3disk stripe, which is roughly 3x faster than either of your disks! So it would still be faster to have them all on the same stripe.
You can leave your FCP app on the sys drive, keeps things cleaner (drive1 for sys and appsm raid for data). You can keep your project files where ever you want, they're not very big and are kept in memory so dont affect performance at all. Though to stay clean I would keep it on the raid, so again the raid is for data, and you can back it up accordingly. The system drive is only for apps and system so you can back that up accordingly too (less frequently probably).
P.S. Technically your 'point 8' is inaccurate. After creating the raid you will not see drives 2,3 or 4. You will see only one 'volume' for all 3 drives. Overall your mac will have 2 'volumes': the system drive, and the stripe of 2,3,4. Physical drives and 'volumes' that mount in your OS are completely seperate. You can create multiple partitions in a single drive, or you can combine multiple drives into a single volume (e.g. using raid). But basically yes, you copy your client files back to the raid.
And remember, if any ONE of the disks in the stripe dies, you lose ALL of the data on the entire 1.5TB volume. So it is pretty important to backup regularly!!!!
(I dont wanna confuse you any more, but raid5 is a good option if you want more security and don't mind paying extra :P, you'll need more hardware for that, and more drives to make it worthwhile - but I would say skip that for now, as you can build your raid0 for free or almost free and use that until you think you need more)

Discount for all materials

Hello,
I would like to create a purchasing info record in SD VK11 (condition record) but for all materials.
I mean when the customer buy 1000 peaces (not depending from material) by us he receives 2% discount.
How ca I loose this problem? with VK11 or with another T.CODE.
Thanks
Dede

Go to V/06, select the condition type for discount and execute. There tick the box "Condt.update" under the tab "Master Data".
Next go to VK11, input the discount type and execute. There click on magnifying lens on top and maintain the maximum value you require in the field "Upper Limit".
thanks
G. Lakshmipathi

CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

HI,
We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems. The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems. However, when I try and run the following command
Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
"property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later. The object's currant version is 0.0 <6.5.6500.0>"
What object is this reffered to? Can anyone help please?
Thanks
Paul

Hi,
To set a default font for all users, you can use this command: -
Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
You can use any font style in place of “Trebuchet”.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V

"playback failed" for all podcasts using ios7

I just updated to IOS 7 and when I try to play a podcast that I am subscribed to, I get "playback failed" for all podcasts. The odd thing is that if I am connected via wifi, it seems to work fine. If wifi is not there, I get that error.
I cannot seem to find a setting anywhere that gets around this.
Help!

See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

50% discount for all Pro using FCP Studio/Sever!

Similar Messages

Maybe you are looking for