500-281 monitor connection

Just bought an HP 500-281 and plan to connect it to a Dell UZ2315H multimedia monitor with speakers and webcam.  As I understand it, the 500-281 does not have an HDMI port, but instead an DVI-D or VGA port.  The monitor only has HDMI, VGA, USB 2.0, USB 3.0 and mini DP ports as well as a headset jack.  I already ordered an HDMI to DVI-D cable, and am trying to anticipate any needed connections in order to get full usage of the monitor(speakers particularly) and of course video.  My question is with an DVI-D to HDMI cable to the monitor, I don't know if I'll get audio as well.  Anyone with experience with this kind of connectivity problem?  Don't know why the 500-281 doesn't have an HDMI output, though that's beside the point.  Any advice/help would be welcomed, thanks, sandssik

Hi,
What is your plan to feed audio to the Dell monitor since DVD-D doesn't supply audio and there is not the typical audio in port that many other monitors with internal speaker are provisioned with for sound?
Are you going to try PC audio line out to mic in on the monitor?
You might need to consider a graphics card with HDMI that would support your audio requirements.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • External monitor connected to MBA causes Internet slow to a crawl

    Real odd issue. I have a Macbook Air and connected to it is a DVI based Formac 19" monitor. Has worked fine with my old graphite base station at B rates. Purchased a new Netgear Dual Band N router and if I connect my external monitor to my MBA, my internet becomes very unstable and hardely works. I mean slug speeds. Not even 28K I would say. I then unplug the white dvi adapter that Apple provided with the MBA from the side of the MBA, don't even need to power down the monitor and can leave it turned on (I guess it is sleep mode since no video signal), and I get great speeds again.
    What gives. Is there some issue with monitors connected to the MBA causing interference with airport wireless?? I had the same issue with a nice Belkin N1 and returned that a couple weeks ago thinking it was a crappy router but now another real nice wireless router has same issue.
    Or is this an issue with MBA itself. I really need a 2nd display for when I work all day long.
    Any suggestions.
    Thanks
    tj

    I'm having the same issue. My home network setup has an Airport Extreme running 802.11n, with an Airport Express attached for a b/g network. My Macbook Air connects fine to the n network except for when I connect it to an external monitor. Right now I'm seeing transfer speeds of 50Kb/sec. Has anyone come across a solution?

  • 2nd Monitor Connected Via DVI to VGA Adapter is Blurry

    I have a G4 dual 1.42 GHz (the last G4 model) and have an Apple 20" Cinema Display connected to the ADC port and a 21" CRT monitor connected to the DVI port via the DVI to VGA adapter supplied with the G4.
    The CRT monitor display is blurry. I have tweaked display settings in System Preferences and the monitor's controls and nothing helps. I used this monitor in a dual monitor setup on a Power Mac 9600/300 and it was razor sharp, so I know that the monitor is okay. I could pull a display card from the old Power Mac 9600 since it's not being used anymore, but I hate to add another card to the G4 because of the heat problems. Any suggestions? Thanks.

    I'm wondering, is it to be expected that the monitor connected to the DVI port via the DVI to VGA adapter won't look anywhere near as good as if it were connected to a separate graphics card? Thanks.

  • TV & monitor connected via DVI to VGA & DVI cable. Wont display

    I have my TV & monitor connected to my mini via DVI(input) to> VGA(output) & DVI(output) splitter cable. I cant get both tv and monitor to work at the same time only one or the other. How can I get this to work?
    Note: I dont want a continuous display, I just want one to show the same as the other. If there both plugged in why dont they both work?

    The answer to your question would require having a block diagram of the mini's graphics sub-system. If the DAC (digital-to-analog converter) behind the VGA port is just driven from the same output as the TMDS transmitter behind the DVI port, then I agree it would be possible that both could output the same screen simultaneously. But if the VGA and DVI ports are treated as seperate channels all the way back to video memory, then likely one would be prioritized over the other, only one could be active, and they would not be able to output simultaneously.
    Another potential problem is that TVs and computer monitors generally want to run at very different formats and they require different signal types to be happy. A TV will want an interlaced output whereas a computer monitor will not. And a TV will want a very low resolution, like 640 x 480, whereas a computer monitor will be happiest at a much higer resolution.
    I hope for you that someone else has this working and chimes in with some practical advice. I try to avoid making posts where I have no practical advice to offer and only bad news, but in this case I thought you might want to know about some potential barriers to success. Good luck.

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • K9N2 SLI Platinum video won't initialize with monitor connected

    Hi,
    I've gone through the RMA process with my vendor and I am on my third motherboard right now and I am still having an issue (so, basically, nightmare scenario here  ). The first and second motherboard failures seemed slightly different but the failure seems to be the same for the second and third and it is making me think that another factor may be at play other than the motherboard. All of the failures have been with the integrated video (which is all I plan to use at the moment --I don't even own a PCI-E video card right now nor have any plans to get one in the near future).
    In the first motherboard, everything seemed to work (as far as I could tell --4 green diagnostic LED's and all that) but no video signal was produced. Testing with an antediluvian Virge DX based PCI card (some of you kiddies may be too young to remember such things) did show normal booting with that video card (as far as I allowed it to go) and I suspect, from the pattern of hard drive activity, that with the integrated video the boot process was also normal (I just couldn't see it because of no video signal being produced). But that is past and has been RMA'd.
    The replacement motherboard and the motherboard replacing the replacement motherboard, on the other hand, have seemed unable to initialize video whenever my monitor is connected but if the monitor is not connected, they work fine (but then video defaults to a 1028x768 mode and I cannot run my monitor at native resolution). Curiously enough, my second motherboard worked correctly twice before exhibiting the described behavior making me think, at the time, that I just got really unlucky and simply had had it fail shortly after testing it those two initial times.
    Not being able to initialize video while the monitor is plugged in means that if I try to start it while the monitor is attached, the motherboard will not even POST and that the diagnostic LED's will be stuck at the video initialization stage (three reds, and one green at group 4).
    Furthermore, if I start it with no monitor attached and plug the monitor in after I get 4 green LED's, it will start booting the OS (Windows XP) but the screen will go black when the Windows XP logo should be appearing. I can also leave it unplugged until it should be at the Windows XP logo stage (or plug it after the 4 green LED's and unplug it again before the video mode switch happens) and when I plug it back in I can see the Windows XP logo. However, as soon as it switches to the Windows XP desktop, I get a black screen.
    And again, if I leave the monitor unplugged until the Desktop should be showing up and I plug it in at that point (or go through the process of plugging and unplugging the monitor while avoiding having video mode switches happen with the monitor plugged in) I do get a Windows desktop at the 1024x768 resolution. Once in the desktop, as far as I can tell, I can do anything there that I normally would be able to do (so I mostly have a working system, as far as I can tell). I have even installed drivers, verified that the sound works, etc.. I will still do a repair install at some point because I am not doing this the "right way" and I probably needed to do it anyway (though I think it's using the right kernel and everything --showing 3 CPU's, etc.) but I am not looking for answers with that as my issue shows up before the system even goes through POST. Again, note that I cannot even take advantage of my monitor's native resolution with the current kludge.
    Curiously enough, if I try to switch to my native resolution of 1920x1200 it will do it but only by switching me to a virtual 1920x1200 desktop on a 1024x768 display (so there's no actual video mode switch involved and the desktop becomes bigger than what my monitor can show). It's as if part of the subsystem is reading the monitor and "knows" that it supports 1920x1200 but another part of the subsystem is just assuming some sort of 1024x768 default common lowest denominator for digital displays. I attribute this to the fact that video has been initialized with no monitor connected.
    I originally had a 350W Enermax power supply (which worked as long as the monitor was not plugged in) supplying 32A on the +3.3V rail, 32A on the +5V rail and 26A on the +12V rail but I replaced it with the power supply shown on my profile (which was probably totally unnecessary as I'm only using the integrated video --but hey, I now have a blue light coming from my power supply so that makes it all worth it  ). I suppose both power supplies could work badly with this motherboard model but it seems exceedingly unlikely that that would be the case (specially since everything works as long as there is no monitor plugged in during video mode switches).
    I currently am running it, on cardboard, with a single stick of RAM (on the slot next to the CPU) and nothing else connected to it except the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). I did play with RAM timings at the request of tech support but I can't imagine how it could be a RAM problem when everything works as long as a monitor isn't plugged in during video mode switches.
    I did update the BIOS from 3.4 to 3.5. 3.5 did not seem to be available at the time of my previous motherboard and I knew it was a real long shot for this to be a BIOS issue that would be fixed with the 3.5 update (specially since the update mentions only CPU support stuff and nothing about video) but I am desperate. Yes, I have done the whole resetting the CMOS thing.
    I am even considering the possibility that there may be some weird incompatibility between the video on this board and my monitor (under the assumption that, quoting Holmes, once you have eliminated the impossible, whatever remains, however improbable, must be the truth). I don't even know how that would work. Note that my monitor worked in my previous system with the digital input (my previous system is no longer available to me for testing --but I did get a chance to test it, after having problems with my first K9N2 SLI Platinum motherboard which I returned, and it worked). Note that my monitor works with the system in question (I simply cannot have it connected while there's a video mode switch under way). Note that the lack of a picture seems to be related to the motherboard as evidenced by it being stuck at the video initialization stage if I attempt to start it with the monitor connected.
    Any wild ideas? I do not want to return this motherboard a third time  and I specially do not want to return this motherboard a third time if it's something that can be easily fixed.

    Quote from: Svet on 25-May-09, 02:21:06
    Have you tried with just memory stick in 1st DIMM near to CPU socket and mainboard out of PC case?
    Yes, I currently am running it, on cardboard outside the case, with a single DIMM (on the slot next to the CPU) and nothing else connected to it except for the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). And it works,... as long as the monitor is not ever connected while video mode switches occur (including power on). And this is exactly how the previous motherboard which I returned also behaved.
    Addendum: As an additional note, I have tried the other DIMM on the same socket by the CPU with the same results (everything works as long as there's no monitor connected during a video mode switch). I also managed to make a bootable Memtest86+ (is that what people use to test memory these days?) USB stick and I am running it right now. It has shown no errors right so far but it has only been running a few minutes. I do not really expect any memory errors to be at fault since they would have to be magical memory errors which only cause problems when there is a monitor connected while a video mode switch is happening but I'm desperate to try anything to find out what the issue is.

  • Mac Mini Won't Boot with VGA Monitor Connected

    I have a new Mac Mini connected to an older VGA monitor using the Apple brand VGA adapter.  The mini is fully up to date and runs perfectly when booted.  However, if I reboot the mini with the VGA monitor connected, it fails to boot.  I just hear the faint chime sound every other second.  There is no output to the monitor and the only way I can get it to boot is to disconnect the monitor and then power cycle the mini.  I can reconnect the monitor just seconds after powering back on and it finishes booting properly.
    Anyone else experience this?  It is very frustrating.  I've also tested with an HDMI connected monitor (without the VGA adapter) and it boots just fine and the display works properly.
    Thanks!

    Okay, I'm back with good news: I have found two remedies for the problem which will hopefully solve it for you as well.
    Given that the issue only occurs when certain monitors are connected, I concluded that the root of it must be a bug in the Mac's firmware related to DDC (Display Data Channel) handling, and that the most promising way to address it should be to just disable the DDC.
    Workaround #1: If your monitor has BNC connectors, use a VGA to BNC cable.
    In this configuration the DDC pins are not connected to the monitor at all. This did indeed fix the problem - my Mac mini booted without a problem with the monitor connected. However, I was not completely satisfied with this solution, because VGA to BNC cables are usually quite heavy and inflexible, and do no go together well with Apple's MDP to VGA adapter and the Mini Displayport/Thunderbolt port which has no locking mechanism.
    Workaround #2: Remove pin 12 of the VGA plug.
    Pin 12 of the VGA plug connects the serial data line of the DDC. Pulling out this pin with a pair of needle nose pliers will effectively disable DDC. I hesitated to do this to my cable (a direct MDP to VGA cable which eliminates the need for a separate adapter dangling from the Mac) and therefore bought a tiny VGA male to female adapter (also called port saver, e.g. Delock 65250) to perform the surgery on that. This has done the trick and my Mac mini has started up fine ever since.
    Of course, without DDC the Mac won't know the model name and capabilities of the attached monitor and thus offer some resolution and frequency settings which the monitor may not support, but that's a small drawback compared to having to pull out the monitor cable everytime you turn on or restart your Mac.

  • X240 (Win 8.1) w/ Ultra Dock and two external monitors connected via DisplayPort problem

    I'm having trouble making this combination work. This Ultra Dock does have two DP connectors, computer sees both external monitors (HP ZR24w) but I cannot get any picture on both at the same time using DP. Sometimes one display does work, but that is not always working.
    When I connect same monitors via VGA/DSUB and DP (with Lenovo DPtoDVI converter) I can get this to work - both same time - , but I'd prefer them both digital and both native DP as both monitors do have that port.
    Ultra Dock does already have the latest firmware and this problem seems to not relate to the flickering problem with T440 etc. X240 is also running latest UEFI/BIOS and I've also tried latest Intel Beta display driver, no effect.

    shelmers wrote:
    W520 with Win 7 Pro
    Minidock Plus Series 3
    Two Asus monitors attached via DVI
    Let me start by saying that the internal and both external monitors work simultaneously. However, getting to that state is the problem.
    I can boot successfully with the laptop in the dock with 1) just the internal monitor, or 2) the internal and one external monitor connected.
    However, if I try to boot with both monitors connected via DVI, the following happens:
    Windows logon screen appears -- but there is no cursor on the screen
    I enter the password and the login continues for 30-60 seconds, then
    Blue screen SYSTEM_SERVICE_EXCEPTION for nvlddmkm.sys with STOP x0000003B
    Lenovo has replaced the dock with no change in behavior.
    Drivers and BIOS are current.
    Most recent change was to set BIOS so Win 7 automatically detects Nvidia Optimus.
    At this point, my best workaround is to disconnect one external monitor whenever I need to reboot, and then connect it again after everything is runing. Not terrible... but it really shouldn't be necessary. Any suggestions?
    If you want to drive the monitors in the manner stated, the BIOS Display property must be set to Discrete and the auto detection below it must be disabled.

  • Yosemite Won't Shutdown With External Monitor Connected

    Hi there...
    I have a MBP 2010 and I've updated Yosemite from Mavericks. Now I'm running the latest 10.10.2.
    Ever since I updated to Yosemite, I have had this problem of my computer won't shutdown when an External monitor is connected. This happens only when I put my computer to sleep.However, if I restart the computer and after logged in to the user and tried to shutdown, it shutdown without any problem. Every time I shutdown it just hangs and I had to force shutdown by press and hold the power button. Which I'm sure is not a proper way.
    Right now only my external monitor connected to my MBP. So I did unplugged the ext. monitor and tried shutdown and it works fine. But it think this is the temporary solution that I've found but it is annoying to unplug everytime I wanted to shutdown and plug it back in once the computer is up and running. Which is not idle solution at all.
    Am I the only one or a lot of people facing this issue? If there is a solution please share. Very much appreciated. Thanks.

    Updated to 10.10.3 and the problem still persist. Still unable to shutdown or restart after wake up from sleep.
    Any one affected? Is it something to do with Gfx card?

  • Second iMac as external monitor; Connection via firewire without a deck/cam

    Second iMac as an external monitor; Connection by firewire without a deck/camera possible?
    I spend a lot of hours to find an answer to the following question, unfortunately without any success:
    I’m working with a new iMac (Intel, OS 10.4.11) and Final Cut. Additionally I have an old iMac (G3, OS 10.3.9).
    I would like to use the FireWire port to transport a dv video stream from the new iMac/Final Cut to the old one so that the old one can be used as a monitor. So all I want is a software for the old iMac that shows an incoming FireWire dv-stream as a live picture.
    I tried vlc, videoviewer, iMovie, Vidi and btv. The problem is always the same: Final Cut (on the new iMac) does not find any FireWire/dv-device nor do all these software on the old iMac find a connection to Final Cut. I think the problem is that both sides are seeking for a device-setup at the FireWire-port on the other side. And none of them sends a signal like „yes I’m here and waiting for a dv-stream“.
    Another attempt was ScreenRecycler with VNC-client on the old iMac. Unfortunately on my old iMac Os 10.3.9 is the last possible OS and no vnc client on that system is fast enough to show a video in real time.
    I also tried virtualDV from Apples FireWire SDK 20. It works so far, that it claims to be a dv-device (on the old iMac) and so Final Cut at the new iMac says: „okay I’ll deliver you that stream“. The problem now is that virtualDV only can record that stream, not show it in real time.
    Is there any solution like virtualDV that shows a live preview and turns the iMac in a FireWire dv-device?
    Is there any solution that Final Cut simulates to be a FireWire dv-device itself and that another computer finds that device and understand the dv-stream?
    Thank you very much for your help.
    Message was edited by: baeumer

    Don't think this is possible.
    You're better off using a DAC (for example the one made by Canopus) and put your DV in and get a compatible signal out the other end for connection to your monitor.
    I don't understand why you would want to go through a computer first, it would be a waste of time and add a huge delay to the signal.
    Finally, I wouldn't use a computer monitor as an external display, it would be useless in my experience. Why not just preview on the one you've got by going full screen in FCP? Also using a computer monitor as a preview/output monitor is not a good idea since it's so different from a normal TV and won't show the correct colour space or issues such as flickering and interlace problems, underscan etc etc.
    Seems like you're using a sledgehammer to crack a very small nut and that would be to use a DV camera via firewire and then connect up a monitor from that. (again using a convertor box if you have a connection problem.)

  • External webcam on external monitor connected to mac

    Hi,
    Would it be possible to have my external monitor connected with optical webcam connected into my mac than when you use skype and those applications/progams it would have two pictures of you on screen?
    (one mac connected to external monitor wants to put optical webcam through to mac to have two pictures) if that makes it simple.
    Thanks,
    Appleguy

    Okay,
    I have  my macbook pro hooked up with a external monitor, would i be able to put a webcam on that monitor and use the 2nd webcam through macbook.
    Let me know if this makes sense,
    appleguy96

  • Lenovo monitor connected to Mac mini

    I have a Lenovo LI2223s monitor connected to Mac mini - and works fine when from full start up.  But when has been in 'sleep' mode overnight, does not display any longer upon wake-up.  Is there something I can do to correct this problem? (waking the monitor does bring up a very very dim light there somewhere - but general appearance of monitor is blank - mini is no longer sleeping)

    OS X: When your Mac doesn't sleep or wake - Apple Support
    Mac mini 2014 won't wake monitor via HDMI
    The above also applies to other monitor connections

  • Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

    Imac 27" Intel Core7  CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

    I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
    So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

  • External monitor connected to new MacBook Pro

    I have a Samsung LED monitor connected to my brand new MacBook Pro with a mini display port adapter and a DVI-D dual link digital male to male HDTV cable. The external monitor flickers, cuts in and out and has static similar to an analog TV that can't find a signal. I'm wondering if it's the wrong kind of cable? Any help would be appreciated.

    I have the same thing but with a 23 inch HP, worked fine with my MBP 13 from 2009 but the 2011 2.4 i5 does the exact same thing as yours!
    Very confused and hoping that some one else can help.
    Thanks

  • How to monitor connection pools using wlsd

    Hi
    i need to monitor connectionpools , i dont know that much about wlsd, how can we configure wlsd to monitor connection pools.
    Cheers
    Raghu

    U can use a Simple Java Code for that: http://jaysensharma.wordpress.com/2010/02/19/jdbcconnectionpool-parameters-using-jmx/
    In the above program you need to just change the following 4-lines:
    int port = 7001; // AdminServer Port
    String hostname = “localhost”; // AdminSewrver HostName
    h.put(Context.SECURITY_PRINCIPAL, “weblogic”); // AdminUserName
    h.put(Context.SECURITY_CREDENTIALS, “weblogic”); // Admin Paassword...
    ====================================
    Using WLST if you want to do it then you need to edit the following Script a Bit : http://jaysensharma.wordpress.com/2010/03/23/testing-datasource-status-using-wlst/

Maybe you are looking for