500 frame quicktime apearing as 30frame block in the score.

I imported a 500 frame quicktime movie into director I then draged it onto my score. On the score it only takes up 30 frames even though the movie is 500 frames. If I play the score the movie will play and will continue to play beyond the 30frame range.
If I place a 500frame quicktime onto the score I would expect to see a 500 frame cast member apear in the score not 30frame.
Can anyone help me with this issue.

I am looking to create interactive videos. So for example I play video until the player gets a choice then the player clicks the choice and is taken to the next video. (choices can timeout too). Is Director the right software for this kind of interactivity ?
Another example; a video plays of someone walking down the road, something happens and at that branching moment the player can either go to the scene or keep walking.

Similar Messages

CS3 Quicktime import restricted to 500 frames???

I believe that an octacore mac can handle more than 500 frames in PS, so please let ME choose by myself how much frames i want to import.
now i have fun with splitting movies and rejoin them afterwards, what a nightmare.
this is just ridiculous.

Thanks for playing!

I would like to export a video with 500 frames as a GIF

I would like to export a video with > 500 frames as a GIF - can the upper limit be adjusted? i'm using photoshop cs6

Yes, choose one of the presets in the Export Settings under the format H.264 instead of mpeg4.
Best is not to use Match Sequence Settings if you are not familiair with settings. You might end up with a preview codec, which is of lesser quality in your end product.

Are UDP 500, 1701 and 4500 ports being blocked -- VPN ports ??

I recently set up a VPN back into my network (for use on public wi-fi, keep they prying eyes away).
Everything was working and now it is not. I checked the access to the port via the internet and they are now closed.
Is VZ blocking UDP 500, 1701 and 4500 now.

#1 Is the computer that you are forwarding to a Static IP?
Yes, the server on the inside is a static IP.
#2 Is that Static IP outside of the DHCP Range of the router?
Yes, the static iP is well above my 4 devices that get their normal dhcp address
i put the starting VPN DHCP address well above my static IP and yet below where the set boxes start using IPs.
#3 If you don't know what the DHCP Range of the router is, it would help to know the brand and model of your router.
I believe the router is the standard VZ issue ActionTek MIR some model, can dig it up when i get home.
Things to note:
All my other port forwards (ssh, http, https) are still working, they terminate on the same host as the VPN.
DNS is up-to-date as i can still access the box from the internet (I am using dyndns updater).
I nmapped from the internet to my host on ports 500, 1701 and 4500 and they are close, where my other port forward ports are open.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

"Object Required" error when using the script block from the code behind

I try to use the following script block on the code behind page
<script defer='true' id='NavID' type='text/javascript'>Nav();</script>
and the function Nav() is on the .aspx page. It gives me the "Object Required" error message. BUT if I add an alert("hello!!!") line inside of the Nav() function, it works fine after the user closes the alert box. Has anyone experienced a similar problem? Please help. Thanks.

There is no way to troubleshoot this by looking at a picture of the diagram. LabVIEW 6 is almost prehistory and many things have changed, especially the file IO all looks different so it is impossible to tell what you are doing.
Error 7 is file not found, so most likely your string operations are not correct. What are the full strings? What is the final file name (maybe you are missing a "\" or maybe you are on a different OS type). Put an indicator at the path wire to see what's happening!
Is this a datalog file?
(Overall, the code is a bit suspect. Nobody needs a seven frame flat sequence. ) Why do a control and an indicator have the same label?)
LabVIEW Champion . Do more with less code and in less time .

QuickTime grabbed all my .WAVs by the throat and won't let go!

This is a Quicktime problem. I fully updated Quicktime on my PC,
Febr. 3d, six weeks ago. I have Windows Vista HP SP-2. I don't
have or use iTunes, so it's not relevant here. I've used NCH music
software for all my music work for 3 years, and am happy with it.
Since that QT update, I've only used my NCH "Switch" program
twice for converting any .flacs to .wavs, which is 95% of the
music file conversion I ever do. The first time about a month ago,
I noticed that the .wav files were suddenly being rendered as QT
.wavs instead of Windows .wavs. I didn't bother to try to listen to
(test) any of them prior to burning to a CD-R, but this type of
thing happened to me a couple yrs. ago w/ a different music file
manager/company, so I should have. QuickTime has taken all the
.wav files everywhere on my computer, no matter how old, and
converted them over to QT .wavs. I wouldn't care, except that
when I try to open and listen to one, it won't play. Instead I get
the following pop-up window, which twice displays the full
pathway-location of the .wav file-- once in top window frame,
and just below that in the top of the inner field. There's a big red
button-like thing in upper-left with a white X in it. The message
states, "The application has failed to start because it's side-by-
side configuration is incorrect. Please see the application event
log for more detail". I haven't been able to locate an event log
for Switch, and even if I could, I have no idea what a 'side-by-side
configuration' is, much less how to correct it. The .wavs will
burn to a CD-R accurately with no problem, and I have no trouble
listening to the disc. But I cannot listen to them sitting on my PC,
which is a big problem. I teach music-related skills for a living
and manage music from my PC all the time. Please assist.
Thanks, D. Demarin

Let's first check your Windows default settings for association of your wavs.
You'll use the Default Programs control panel as per the following Microsoft document:
[Change which programs Windows uses by default|http://windows.microsoft.com/en-US/windows-vista/Change-which-programs- Windows-uses-by-default]
Use the *Associate a file type or protocol with a program* option. Check to see if you've currently got .wavs associated with QuickTime. If you do, change the association to your preferred player. Do wavs play properly now?

Radio button in two different blocks in the selection screen

Hi folks,
         In my selection screen i have two selection blocks. First block to create a new document no, second block to display the list of the created document numbers.User has to go any one of that..can i keep first radio button in the first selection block and the second radio button in the second block...I have already tried..but its not allowing..is this possible..if so please suggest me how...
           Thanks,
           Shyam.

Hi,
Hope the following logic will help u.
selection-screen begin of block input with frame title text-000.
parameters :desktop     radiobutton group rg_f user-command rg_f,
                   in_file type ibipparms-path modif id ps,
            menu     radiobutton group rg_f,
                   sys_file type ibipparms-path modif id as default '/sapia/iface/in/comm/sapfin/' .
selection-screen end of block input.
                                    AT SELECTION-SCREEN.                                       *
at selection-screen.
case sy-ucomm.
    when 'RG_F' or 'RG_B'.
      perform f_toggle_finputs.
    when 'ONLI'.
      if ( desktop = c_x and in_file is initial ) or ( menu = c_x and sys_file is initial ).
        message e100.
      endif.
endcase.
FORM    : f_toggle_finputs
loop at screen.
    if screen-group1 = 'PS'.
      if desktop = c_x.
        screen-input    = 1.
         sys_file = c_server_path.
      else.
        screen-input    = 0.
      endif.
    endif.
    if screen-group1 = 'AS'.
      if menu = c_x.
        screen-input    = 1.
        clear: in_file.
      else.
        screen-input    = 0.
      endif.
    endif.
    modify screen.
endloop.
endform. "f_toggle_finputs
Thanks.

Ive got a Mac Pro bought seconf hand, It doesn't allow me to update as the username is blocked to the previous owner, it appears off and can't change it, the box goes directly to password. I have changed the computer username and password but the problem

Ive got a Mac Pro 2010, bought second hand through eBay. When it comes to update the software, the username is blocked to the previous owner. It appears off and the box goes directly to password. I have tried to reset then to log in in apple store with my login but didn't help. I would appreciate any tips to sort it out
Thanks fellas

That machine did not ship with Mountain Lion (Mac OS X 10.8), so that means the copy of Mountain Lion on the machine was purchased by the former owner and is non-transferable. It is permanently linked to his/her Apple ID, so you cannot update or reinstall it.
What you need to do (which the seller should have done for you) is reinstall the original system that that machine came with. I believe that would be Snow Leopard (Mac OS X 10.6). What you need to do is reinstall that system from the original disks. If the seller did not provide those disks, you can call Apple and get them replaced for a small shipping and handling fee.
For more info, see:
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

When i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

when i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again.

Trying to install/format an INTERNAL hard drive using Disk Utility gives me "Error: -69760: Unable to write to the last block of the device". Is that a hardware problem and what could be done about it?

*** PLEASE NOTE*** - This is a query about an INTERNAL HDD not an external one. Thanks.
My Mac is a late 2009 model and the current hard drive recently failed. So I bought a new one, exactly the same, albeit 750gb instead of 500gb. The HDD is a Seagate Momentus 7200. Before the my current drive failed I made a time machine back up to an external USB HDD. I've inserted the HDD into the bottom of my Mac, plugged in the USB and started my machine pressing the 'Option' ([ALT]) key. I go into Disk Utility to try and format the new HDD by creating a new partition but I keep getting the messages,
"Error: -69760: Unable to write to the last block of the device"
or
"POSIX: could not allocate memory"
This is actaully the third HDD I've tried. The first was another Seagate Momentus 7200 500gb, but this time it was a newer model (model number ended in 423AS instead of 420AS - the new one I am trying ends with 420AS, which is the same as the current HDD). I then tried a Western Digital drive but that one didn't even show up in DU. Forums and tech support are suggesting it's faults with the HDDs but surely not three in a row?
Could this be an issue with another part of my Mac?
Is there anything else I can do to format the HDD, have I missed a crucial step?

Did you ever get a resolution to this issue?
I am having that exact error with a new 512GB SSD from Crucial, in a 15" MBP mid-2010.
I really wonder now if the stupid SATA cable could be bad - causing the initial SSD fail. I am replacing it with the EXACT same drive, and getting that "last block" error when i partition in the GUI or from command-line.
thanks!

Delivery block in the schedule lines.

Hi,
Mine is a MTO scenario. I am using planning strategy 50. So a planned order ---> production order will be created against MRP run against each sales order.
When i am placing a delivery block at the header the system is working fine. Its deleting the planned order(converted production order).
when I am placing a delivery block at the schedulle line its not working fine. its not deleting the underlined planned order or production order.
what configuration should I do to make this work.......

Hi,
Look at the help (press F1) on the field confirmation block at SPRO-> Sales and Distribution ->Basic functions ->Availability check and Transfer of Requirements ->Tranfer of Requirements -> Block quantity confirmation in delivery blocks ->Reasons for and Scope of Delivery Blocks: Transfer of Req. blocks.
It looks applying delivery block at schdule line level will not delete the passed requirements. This is standard SAP behavior. If you want to change this nature, then you may need to use an User-exit.
Following is description given for the field confirmation block;
Confirmation block
Indicates whether the system, in addition to blocking delivery, also blocks the confirmation of order quantities after an availability check during sales order processing.
Example
You may want to block confirmation of sales orders where the creditworthiness of the customer is in question. In this case, you set the confirmation block for the delivery block that relates to credit problems. During sales order entry, when you enter a delivery block because of credit problems, the system, after you save the order, does not confirm any quantities for delivery. In this way, the goods remain available for other customers.
Note
If, before you save a sales order, you look at the schedule line overview, you can see what the system would confirm, if the block were not set. However, as soon as you save the sales order, the confirmed quantities are automatically reset to zero.
Dependencies
If you enter the delivery block at header level, the system transfers the desired delivery quantity for all schedule lines in the requirement. The confirmed quantity is deleted. This function is not available when you enter the delivery block at schedule line level.
Regards

Multiple data blocks on the same canvas

Forms newbie question:
Is it possible to have 2 data blocks with two different sets of transactional triggers (ON-UPDATE, ON-LOCK, etc.) on the same canvas?
I've got an example where i've got two data blocks (one sourced from a view, and one that is a CTL block) on the same canvas. The block sourced from the view is working fine. When I make updates, they are reflected, etc. But, i've got one field in the control block that I need to update from as well, and I can't seem to get it (or any of the CTL block items) to show up as "updateable", regardless of the set_item_property....theyre always grayed out.
Do i need to take the user to a new canvas to be able to utilize the update of the ctl field?

A second canvas is not needed. Normally, control-block items are always updateable, so there is something going on in your form to prevent it.
> I can't seem to get it (or any of the CTL block items) to show up as "updateable",
regardless of the set_item_property....theyre always grayed out.
What... Is there code someplace in the form that sets them to Enabled, false? If that is the case, then to get them working again, besides setting Enabled to true, you also must set Updateable and Navigable to Property_True. (This is documented at the end of the on-line help on Set_Item_Property.)

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Scorpio 500 GB. When i tried to install the MAC OS, it identies a hard drive with 3.6 TB and i'm not able to do the installation.

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Blue Scorpio 500 GB. When i tried to install the MAC OS, it identifies a hard drive with 3.6 TB and i'm not able to do the installation. I touhgt the new ard drive was bad but i was able to install windows XP. Any ideas what do i have to do?

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

While using Skype on my mac pro the screen freezes and splits in two and the left hand side shifts to the right and the right shifts to the left with a large black block down the centre, should I take it back to store as it is only a month old??

I have only had my mac one month and it seems while I use Skype the screen freezes and I cant click on anything and everything on the right hand side of the screen shifts to the left and the left to the right with a back block down the centre and sometimes lines running down the screen over all. As it is almost brand new should I be going back to store to get this problem fixed??

Yes. You are still under warranty. Why waste it?

500 frame quicktime apearing as 30frame block in the score.

Similar Messages

Maybe you are looking for