500 GB in MacBook Pro with problems restarting!

Hey,
I just upgraded my MBP from a 200GB HDD to the Samsung Spin Point 500GB HDD!
The Book started with the Leopard DVD and installed the System to the drive being formated to one partition and GUID/GPT and Case-sensitive Journaled HFS+
Now after installation, when i restart, i get the grey screen and the system starts to load, but then at some point during startup, the HDD will stop running and nothing happens!
If I start holding the alt key, selecting my old HDD connected via USB, it starts up and shows the new 500GB drive on the desktop, where i can open it and use it....
any ideas?

Philipmk,
Do not attempt to install OS X on a case-sensitive volume. Although you may have successfully installed it, it will not operate correctly. You should re-format the volume without the case-sensitivity, and all will be well.
Scott

Similar Messages

Macbook Pro Retina keeps restarting "due to a problem" as well as imovie and Skype

My new Macbook Pro Retina keeps restarting "due to a problem", when I open my skype it crashes and my imovie crashes all the time as well. I just got this computer last week. If someone could please help me out.
These are the few of the errors on the console utility
8/25/12 12:19:38.092 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
8/25/12 12:19:38.092 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=1223954432) failed (error code=12)
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=1223962624) failed (error code=12)
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=1223974912) failed (error code=12)
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: iMovie(694,0xac8ba2c0) malloc: *** mmap(size=979181568) failed (error code=12)
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** error: can't allocate region
8/25/12 12:19:38.093 PM [0x0-0xaa0aa].com.apple.iMovieApp: *** set a breakpoint in malloc_error_break to debug
8/25/12 12:19:38.094 PM iMovie: *** Canceling drag because exception 'NSMallocException' (reason '*** -[NSConcreteMutableData appendBytes:length:]: unable to allocate memory for length (979177572)') was raised during a dragging session
8/25/12 12:22:06.000 PM kernel: IOSurface: buffer allocation size is zero
8/25/12 12:22:07.000 PM kernel: IOSurface: buffer allocation size is zero
8/25/12 12:23:33.000 PM kernel: IOSurface: buffer allocation size is zero
8/25/12 12:23:37.000 PM kernel: IOSurface: buffer allocation size is zero
8/25/12 12:23:37.000 PM kernel: IOSurface: buffer allocation size is zero
8/25/12 12:23:39.000 PM kernel: IOSurface: buffer allocation size is zero
8/25/12 12:24:29.322 PM [0x0-0xc50c5].com.skype.skype: DVFreeThread - CFMachPortCreateWithPort hack = 0x22e20e0, fPowerNotifyPort= 0x229f7d0
8/25/12 12:24:29.322 PM [0x0-0xc50c5].com.skype.skype: DVFreeThread - CFMachPortCreateWithPort hack = 0x263d630, fPowerNotifyPort= 0x26221e0
8/25/12 12:24:29.322 PM [0x0-0xc50c5].com.skype.skype: DVFreeThread - CFMachPortCreateWithPort hack = 0x263d840, fPowerNotifyPort= 0x2607c90
8/25/12 12:25:18.000 PM kernel: IOSurface: buffer allocation size is zero
8/25/12 12:27:27.481 PM com.apple.WindowServer: WindowServer(87,0x7fff74852960) malloc: *** error for object 0x7ff851ba0050: incorrect checksum for freed object - object was probably modified after being freed.
8/25/12 12:27:27.481 PM com.apple.WindowServer: *** set a breakpoint in malloc_error_break to debug
8/25/12 12:27:27.798 PM ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
8/25/12 12:27:28.745 PM SystemUIServer: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.745 PM SystemUIServer: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[673:207] HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[673:207] port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[757:207] HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[761:207] HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[757:207] port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.746 PM Finder: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper[761:207] port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.746 PM iTunes: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM Finder: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.746 PM iTunes: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.746 PM Google Chrome: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM Google Chrome Helper EH: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM rcd: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.746 PM Image Capture Extension: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.747 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.745 Google Chrome Helper EH[615:b03] HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.747 PM Google Chrome: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.747 PM Google Chrome Helper EH: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.747 PM rcd: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.747 PM Dock: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.747 PM Image Capture Extension: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.747 PM [0x0-0x90090].com.google.Chrome: 2012-08-25 12:27:28.746 Google Chrome Helper EH[615:b03] port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.748 PM Dock: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.750 PM com.apple.dock.extra: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.751 PM com.apple.dock.extra: 2012-08-25 12:27:28.746 com.apple.dock.extra[143:1707] HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.751 PM com.apple.dock.extra: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.752 PM com.apple.dock.extra: 2012-08-25 12:27:28.750 com.apple.dock.extra[143:1707] port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.752 PM talagent: HIToolbox: received notification of WindowServer event port death.
8/25/12 12:27:28.753 PM talagent: port matched the WindowServer port created in BindCGSToRunLoop
8/25/12 12:27:28.775 PM UserEventAgent: CaptiveNetworkSupport:UserAgentDied:139 User Agent @port=26115 Died
8/25/12 12:27:28.782 PM com.apple.launchd.peruser.501: (com.apple.Dock.agent[114]) Exited with code: 1
8/25/12 12:27:28.856 PM Google Chrome: MIG: server died: CGSReenableUpdateForConnections: Failed
8/25/12 12:27:28.856 PM Google Chrome: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/25/12 12:27:28.857 PM Google Chrome: (ipc/send) invalid destination port: CGSSetEventMask: error setting window event mask
8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSDisableUpdateForConnections: Failed
8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSReenableUpdateForConnections: Failed
8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSGetOnScreenWindowCount
8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSGetOnScreenWindowCount
8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSGetWindowPresenter
8/25/12 12:27:28.858 PM Google Chrome: (ipc/send) invalid destination port: CGSOrderWindowList
8/25/12 12:27:28.859 PM Google Chrome: kCGErrorFailure: _CGSLockWindow: Cannot synchronize window backing store
8/25/12 12:27:28.859 PM Google Chrome: kCGErrorFailure: _CGSLockWindow: Cannot synchronize window backing store

melirodriguez13 wrote:
My new Macbook Pro Retina keeps restarting "due to a problem", when I open my skype it crashes and my imovie crashes all the time as well. I just got this computer last week. If someone could please help me out.
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test.

I'm using a macbook pro with version 10.6.8 installed. whenever i try to install my software updates, it immediately asks me to restart my computer to finish the installation. after doing so and signing back on to my account no updates have been installed

I'm using a macbook pro with version 10.6.8 installed. Whenever I try to install my software updates, it immediately asks me to restart my computer to finish the installation. After doing so and signing back on to my account, nothing has changed and no updates have been installed. It still says the same 8 items need to be installed, and the same process occurs again. Any idea how I can fix this?

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Problems with selection marquee in Photoshop CS5.5 on MacBook Pro with Hi-Res Display

A few months ago i bought a 15" MacBook Pro with the hi-res display (not retina display...just the higher res display offered prior to the release of the retina display).
I'm having trouble with Photoshop and selection marquees. In particular, anytime I make a selection while viewing the image at 100% zoom level (so, actual pixels), the "marching ants" selection marquee I draw always shifts over a few pixels after I draw it.
So I'll make a precise rectangular marquee around an object, and it will look right, until I release the button on my mouse. The moment I release the mouse button, the marquee shifts over a few pixels in both directions (vertically and horizontally).
This has never happened on any version of Photoshop or on any Mac I've ever used before (and I've been using Photoshop for a LONG time on LOTS of different Macs), so I can only assume it has something to do with the Hi-Res display. This same version of Photoshop works just fine on my previous MacBook Pro laptop. But after installing it on the new MacBook, immediately - and consistently, every time - it happens.
If I zoom in and use the tool, it doesn't have the problem. It seems to only occur when viewing at 100% (which is usually for me), but it does do it EVERY TIME I use the rectangular marque tool.
It's driving me a little bit batty.
Anyone else?

An update...I had thought to try changing the Open GL settings, but it didn't seem to make any difference. However, I hadn't realized that you need to restart Photoshop for changes made to the Open GL preferences to take effect, so I wasn't actually changing anything.
Turns out, it's an Open GL drawing issue - and disabling it fixes the problem.
Of course, you also lose all of the other enhancements that come from enabling Open GL drawing.
I'm only leaving this discussion up in case anyone else with the same problem stumbles across the issue.

My macbook pro 2012 keeps restarting saying there is a problem

My macbook pro with retina display 2012 keeps restarting saying there is a problem. tHEN A REORT POPS UP

Two of those reports were panics with Sophos as the only item in the backtrace. You don't seem to know how to read panic logs, so I'll have to point out that this is the only confirmation you will ever get that a particular kernel extension caused the panic.
And you can absolutely rule out a hardware problem or corrupted system based solely on the fact that a Sophos kext is in the installed kext list?
You yourselfwrote in that thread:
Linc and many others are of the opinion that you should absolutely never install commercial anti-virus software, such as Sophos. ... Certainly, your experience would seem to indicate that there's some truth to that.
Indeed I did. That was back when ML was new, and there had been a couple reports I saw complaining of problems with Sophos. It was too early to tell whether there was a compatibility problem, but it was easily possible. Nothing ever materialized, that I have seen, since then.
Let me ask you this, though: have you ever actually tested any of them?
Of course not [...] I tell people to remove it, and when they do, their problem is solved. That's all the testing I need to do.
You've gotten enough feedback to take this from anecdotal to statistically significant? If so, those findings would be worth documentation. If not, you can't be 100% sure that there wasn't something wrong with the Sophos install, the system or the hardware.
Now, don't get me wrong... I'm not trying to claim that Sophos won't ever cause problems and can't conflict with anything else. No software is ever perfect, and all kernel extensions run the potential risk of conflicting with other third-party kernel extensions or causing other problems. However, based on my testing as well as reports that I have received, I see no reason to condemn Sophos in such an absolute manner. It is one of the best-behaved anti-virus apps that uses kernel extensions, in my experience. If I were going to recommend anti-virus software for someone (which would depend on many factors, such as that user's sophistication, work environment, home environment, use patterns, etc), Sophos would be one I would recommend.
Not once, to my knowledge, has it ever saved anyone from a malware infection
You have documentation of that, do you?

Restarting MacBook pro with cinema display and lid closed?

Is it possible to restart the macbook pro with its lid closed when it is hooked to an apple 20" cinema display?
I have a 15" macbook pro 2.33GHz and want to be able to use it like a desktop system with just the external display when I am at home.
Also should I worry about heat issues running it with the lid closed sitting on the wood desk top?
Thanks

Thanks, I just realized that I phrased my question rather badly.
My real problem is how to start my computer without opening up the lid. I have a stand on my desk that the display is on and the macbook slides under when it's closed. Having to unplug it and pull it out every time it is shut down and needs to be started is rather a pain. The button on the side of the display seems to work for sleep/restart/shut down, but it doesn't seem to be able to start the computer once it is shut down; so my question is, is this possible?... am I dreaming?
Macbook Pro 15" 2.33GHz Mac OS X (10.4.9) 20" apple cinema display

Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,

HP Print Drivers

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********

Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

So, my Macbook Pro with retina display only prints in black and white. My printer, officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

In the Print dialog, select the Color Matching tab and then select Vendor Matching.

Snow Leopard Install problems on Macbook Pro with bad optical drive

I've tried this (refer to article below) to install Snow Leopard on a Macbook Pro with a bad optical drive, but I am not able to choose a wi-fi network, or install disk after startup. Is there something else I need to do?
To use Remote Install Mac OS X or Mac OS X Server:
Insert the Mac OS X or Mac OS X Server Install Disc into the optical disc drive of the other computer.
If the other computer is a Mac, open /Applications/Utilities/Remote Install Mac OS X. On Windows, choose "Remote Install Mac OS X" from the Install Assistant.
Read the introduction and click Continue.
Choose the install disc you want to use, and click Continue.
Choose a network connection: AirPort, if you are using an AirPort network, or Ethernet, if the other computer is on an Ethernet network and you have an optional Apple USB Ethernet Adapter connecting your MacBook Air or Mac mini to the same network. Click Continue.
Restart your MacBook Air or Mac mini and hold down the Option key as it starts up, until you see a list of available startup disks.
Click Continue in Remote Install Mac OS X.
If you chose AirPort as your network in step 5, on your MacBook Air or Mac mini choose your AirPort network from the pop-up list.
If the network is secure, you will be prompted for a password. You can enter a private network name by choosing the ellipsis (...) and typing the name.
If you chose AirPort as your network in step 5, when you see the AirPort status icon indicating signal strength, click Continue in Remote Install Mac OS X.
You can now reinstall software, reset your password or run Disk Utility using instructions from the User's Guide.

Are you able to connect the two via Firewire cable? If so you can boot the MBP into Target Disk Mode. Then boot the other computer from the OS X installer disc. The installer should detect the hard drive of the MBP as an eligible target destination.
If you have a spare hard drive or at least 10 GBs of usable space on an external drive, then you can create a small 8 GB partition on that drive. Then clone the installer DVD to that partition using the Restore option of Disk Utility. You can then boot the MBP from that partition using OPTION boot: Start the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the cloned DVD then click on the downward pointing arrow button.
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external partition.
Source means the OS X Installer DVD.
Message was edited by: Kappy

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Oracle Installation Problem on MacBook Pro with OS X

Im trying to install Oracle database 10g on my MacBook Pro with the latest OS version. At first I was a bit confused on which of the links I should download, so I downloaded the client release 1, it was a 300mb aprox download. When the download was over I couldnt run any of the files on my Mac, maybe its because they only run on Mac OS Server? maybe i got the wrong link?
FORGOT TO READ FIRST... SEEMS LIKE A COMMUN PROBLEM. SORRY
Message was edited by:
user575116

AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

500 GB in MacBook Pro with problems restarting!

Similar Messages

Maybe you are looking for