500 gb new hard drive with 4 gb ram .. why can't i install mountain lion???

Sorry for the question because I'm sure the answer is out there. But I've searched and searched and don't know why I can't download mountain lion!?!
I have a mid 07 macbook and have replaced the hard drive with 500 gb seagate and the memory with 4 gb ram. Shouldn't I be able to downloan it with those specs?? It keeps telling me I can't. I'm runinng 10.6.8 right now.
Thanks for your help in advance

It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion requires 64bit native drivers. Mountain Lion no longer supports Intel's GMA 950 or GMA X3100 graphics processors.
While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion is pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/

Similar Messages

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Load Leopard on a New Hard Drive with Windows XP already loaded

How can I load a new, fresh Leopard operating system on a new hard drive, with Windows XP already loaded and working on it's own independent hard drive via bootcamp beta. I have been using Tiger on it's own drive and wish to discontinue Tiger and move to Leopard without reloading windows. Can I just put in a new drive, and load Leopard with the Windows drive in place?
Please, any suggestions would be appreciated.
Mac Pro Mac OS X (10.4) Runing Windows and Mac operating systems

Malcolm:
Thanks so much for replying to my question! I am new to MAC and have Tiger and Windows XP on separate drives. I will be removing the drive with Tiger and putting in a new drive to load Leopard and I wondered how that would effect accessing Windows XP since the Windows drive will remain in the system. Is there anything I need to do with bootcamp, since Windows was loaded using the Beta version of bootcamp, and bootcamp icon currently shows in the Windows XP taskbar. Tiger was pre-loaded when the computer was purchased. In fact I had to backdate the beta bootcamp version in order to get it to work. I hope this is not asking too much, but I wondered if there would any problem with Windows after the Leopard load.
THANKS IN ADVANCE!!

Wants to use my Time capsule hard drive with Plogoplug but I can't... Any Idea on how to...?

Wants to use my Time capsule hard drive with Plogoplug but I can't... Any Idea on how to...?

If the TC is not the main router just bridge it.
Have you tried it with the TC bridged??
You need to describe the full network because we have no idea how all this is setup.

Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8

Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8.

First, repair your hard drive and permissions:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Second, make a bootable backup to an external drive using the Restore option of Disk Utility:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Third, purchase and download Mountain Lion from the App Store. Be sure you meet the requirements for Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it.

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it. Internet recovery asks for his Apple ID and password. He has no idea. I have an Apple ID but have never bought anything through the iTunes store so it won't accept my Apple ID. I don't know if his computer is under warranty. He does not remember if he has Applecare. I tried reinstalling Leopard -- the computer originally came with Leopard -- but the computer screen goes grey and a message comes up saying I need to restart. He wants to give this computer to me since it's useless to him. What do I do to get a system on it again?

You will need to reformat the hard drive to go back to Snow Leopard or Leopard.
Does he have a Snow Leopard Disk? He should, as there is no way to go from Leopard to Mountain Lion without it. If you can find the Snow Leopard Disk, I'd at least start with that.
You will need to use Disk Utility in the installer to format the hard drive and get rid of the recovery partition.
Boot from the installer disk by holding down the C key on restart. When it boots, Open Disk Utility (Utilities menu, at least in Snow Leopard).
Select the Hard drive and then click the Partition tab.
Select 1 Partition from the partition menu.
Select Mac OS Extended (Journaled) as the format.
Name the drive (Macintosh HD is the standard).
Click Apply to partition the drive.
When it is done, quit Disk Utility and install the OS.

Please help! Cannot access TC backups on new hard drive with Lion!

I know this seems like a generic posting, and believe me that I have searched through countless posts to find the situation most similar to mine. To start, the basic story (I am pretty computer illiterate, so excuse the lack of terminology):
-My computer was working slow, beach balling, etc. two weeks ago - took to Apple Genius Bar for help and they suggested need for new hard drive. I already had a hard drive crash in January, but since I have had a Time Capsule running Time Machine since September 2009, I hooked it right up and restored from a backup with no issue... so I wasn't worried about this. I waited to make sure that I had the most recent backup (and needed to use my computer for law school for a couple days), so I turned it in a day later immediately after a complete incremental backup via TM on my TC.
-Got my computer back from the Apple "depot" with new hard drive and hard drive cable.
-Had an extremely hard time getting my TC to link to my computer and via AppleCare phone help, realized that Apple had given me back my computer with Leopard, and they said that I needed to go back to the store to get a Lion reinstall since the backups had been done in Lion.
-Went back to Apple store, reinstalled Lion... they told me there would be no issue once I got home and hooked up to TC. Connected to TC via ethernet and went through "set up" procedure as if it was new computer - could never get past the "Select the Disk" page. Either it was beach-balling or just sitting there, and I couldn't click continue or anything.
-Called AppleCare again, they said to try it through Migration Assistant instead of Set Up... again, could not connect to TC. They said it was too complicated to do over the phone and sent me back to the store...
-By now, I am on vacation and spent 5, yes FIVE, hours at another store trying to migrate the data to no avail. I obviously don't know everything they tried, but I know they tried installing each operating system since Leopard, going through set up and migration assistant, and doing a disk repair of the TC. None of this worked. Every single time my TC connects and you can see the title of the drive ("Data") and the two separate backups ("emilysmac" was my old computer and "emilysmacbookpro" was the dummy one we tried to make). Emilysmacbookpro was accessible with no data on it, but once we clicked on emilysmac it just said "connecting" forever and never did anything.
Basically:
-300GB of my TC shows that it has been used, so I know something is there.
-I can also pull up the data on another computer, and it shows files dated from September 2009 up to the date I last updated, but they do not look how they used to - they are "Unix Executable" files and cannot open through Time Machine.
I have a really hard time thinking that my TC AND my computer hard drive failed at the same time - which is actually what Apple suggested to me. Is there anything that anyone knows that will help?! I am desperate here! This TC had backups of all my music, pictures and law school work over the past 2.5 years. Any help would be much appreciated!

PS I have also looked through Pondini's site, but I am not sure if I am missing something since I don't totally understand all of it. Thanks again!

I can't install Snow Leopard on a brand new hard drive with a brand new optical drive.

I need help please. I have a 2009 MacBook Pro. The hard drive crashed a while back so I bought a new one. The original Snow Leopard disc that came with it was scratched so I bought a new one of it as well. After trying/failing to install Snow Leopard on the new hard drive about a dozen times I bought a new optical drive as well. I installed the new optical drive today, tried to install Snow Leopard again and STILL got the same installation error messages. Any help that anyone might be able to provide would be greatly appreciated.
Last error message:
Install failed: The Installer could not copy the necessary support files.

Did you partition and format the new drive first?
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Upon completion quit Disk Utility and return to the installer. Complete the Snow Leopard installation.

My powermac g5's hard drive failed, so I got a new hard drive with osx 10.5

I got a new hard drive for my powermac g5 after the other one failed. This one has osx 10.5 on it, I'm just wondering how im meant to install it, I'm not sure whether it will work straight away or whether I will have to install something or other with it. Thanks.

Hi-
As long as the drive is a SATA drive, and as long as the install was done on a PPC machine, or at least, with a Mac OS Extended format, the drive should be plug and play:
http://manuals.info.apple.com/en/PMG5HDDIY.pdf

HOW DO I SAVE APPLICATIONS INSTALILNG A NEW HARD DRIVE WITH NEW OS?

I recently purchased a used G5 that is loaded with programs. I am getting signs that the hard drive is getting ready to crash. I installed a 1TB hard drive and formatted it. What I want to do is install leopard on the TB hard drive but still transfer all the applications and programs over from the old HD. A lot of the programs I don't have serial codes for. Can I do a new OS instilation on TB HD with new users and everything and still transfer all the programs over that I don't have serials for and them work perfectly without entering in new serials.

No. Either ask the original seller for the discs, manuals, and serial numbers, and ensure they destroy their copies of the data, or purchase your own license for the software that they did not supply on disc and/or legitimate license code. The license to the software is limited to whomever has the software in hand with its codes. Purchasing Leopard will only entitle you to the contents of Leopard. Leopard retail on its own does not include iLife, except for iTunes, though Apple does have a Mac Box Set which includes iLife and iWork. The original discs that came with the Mac still have a hardware test which you can't get other than by requesting them from the original seller.

Old user files magically show up on new hard drive with 10.6 installed.

My daughters' hard drive crashed and we never backed up any of her files anywhere. She was running 10.4 on that drive. I installed a new unformatted drive and installed 10.6. When everything was up and running, she showed me a good portion of all her old music, and other files created with iWork, on the crashed drive, were on the computer with the new drive. I did not install any of these files and she didn't either. There was no time machine installed on the old drive so there was no backup files installed during the 10.6 install.
So my question is; Where were these old files at and how did they magically show up on the new hard drive? Were they saved somewhere on a non volatile memory chip? They seem to be old versions of files she had saved on the old crashed hard drive.
Thanks

If by "new PC" you mean a Windows based machine you do not want to format the drive for Mac because Windows cannot read Mac formatted drives (not without extra utilities). I'm running an older system so I'm not as up on the capabilities of Snow Leopard. For PC use you will want NTFS or FAT32 format except Macs cannot write to NTFS without extra utilities (not sure if this has changed with newer OS)... I just use FAT format for compatibility with PCs (on my flash drive).

New hard drive not appearing in iTunes, can't burn discs

Just got a new hard drive. iTunes does not see either of my Superdrives. Any ideas on how to "connect" iTunes with my drives again, or if that's necessary. I have checked out the Help info in the app and didn't find an answer. Thank you!

Hi:
What happens when you run the HDD diagnostics test in the BIOS?
It is doubtful the notebook's HDD will boot with W7 already installed on it from another PC unless it is the same model as yours.
Quite often that is what you get when you try booting from a HDD from another PC that already has Windows installed on it -- nothing at all.
Paul

New Hard drive...but how do I re-install I-movie......Please Help !!!

My Apple hard drive for my G-4 crashed after only 2 years.
A new hard drive has been installed but I am missing all the software that came with the computer from new.
I dont have I-Movie on the new hard drive....
How do I re-install this....can I download it from the net free back on to my computer.....please help !!!!
Robert.

Hello, Robert,
You should have CDs that came with your computer. One is a reinstall disk and one is a restore software disk. Insert the software restore disk, and you can reinstall just the iLife apps you want using the 'custom' install option to make your choices.

I have new hard drive, should I use migration assistant before I install Snow Leopard or install Snow Leopard first?

I just had a new hard drive installed after a hard drive failure. I need to install Snow Leopard, Lion and VMware Fusion. Should I use migration assistant to reinstall my old files and applications first or should I install the new Operating Systems first? Some of the old files do have corrupt data and I will have to pick and choose what back-up files I re-install.

Pondini wrote:
memalyn wrote:
Some files were backed up on another external drive but not all.
How was that done? Drag & drop? An app like CarbonCopyCloner or SuperDuper?
Initially files were backed up on the iMac with Time Machine. I purchased a My Book external hard drive and after doing a full back up on it, I began doing all of my incremental back ups on it using Time Machine. Sometime later, I purchased a Western Digital external hard drive that included back up software on it called "WD Back-up" so I could use it to store all of my Music and Audiobooks on to keep my iMac and My Book free of those file types. The WD Backup software allowed me to pick and choose what files I wanted to back-up. I don't think I had been backing up Music and Audiobooks on the Mac anyway or maybe I was, I don't remember if I can selectively pick and choose files with Time Machine - I have not checked as I have not yet plugged it into my new hard drive. Once The My Book drive became full with regular back ups, around June or so I had to switch over to the WD Back up drive. I recall that I was very concerned that I could not do a full back up on the WD drive because if I did, I would have to reformat the drive and I did not want to do that, so I think I was able to selectively back up some additional files from my iMac but again, I do not know for sure since I have not looked at what is on the drive. I do know that if I was able to back up additional files I had to do it with WD Back up and not Time Machine, if that matters.
I know that the files in the partitioned drive and files associated with VMware Fusion are damaged. If I do a full restore, it will restore the VMware Fusion app and partioned drive
We need some clarification:
Do you mean there were 2 partitions on your internal HD? If so, how was the second one formatted? Was it backed-up?
No, there was only one partitioned drive. The way I understand it is the VMware Fusion software does the partitioning and the app resides on the Mac. After that was done, I then installed the Windows software on the partitioned drive. There is a critical file on the Mac under a Folder called Virtual Machines and in the Virtual Machines folder, the "Windows Bundle" or some such thing keeps locking each time the software crashes due to the problem files somewhere within the files in the VMware Fusion software that (I think resides) in the Windows environment that I cannot access. The Virtual Machine file on the Mac gets backed up so the Windows Bundles files get backed up and that includes all the screen shots (essentially backups) of the Windows environment. The Windows environment includes some of the apps and their data in Windows such as Quicken. Theoretically, the partitioned drive does not get backed up but in reality if the screen shots do, some of the partitioned drive does - corrupt or not. If you have a Quicken file open and a drop down screen in Quicken frozen when the system crashes, that is what gets backed up and there is no way you can get back into Windows or Quicken.
               If I do a full restore, it will restore the VMware Fusion app
If you restore an OSX volume, yes, that will restore all apps, but that's not necessarily bad. If necessary or desired, you can always delete or reinstall a suspect app. That way, all your other apps will be ok. For most users, reinstalling all apps is a considerable project. See Transferring Applications for an explanation.
Well, that is true. To reinstall VMware Fusion, Windows and Quicken would much, much easier than all of the Mac software I have. Plus, the VMware Fusion version I have is not compatible with Lion and my goal is to install Lion, so I will have to upgrade VMware Fusion no matter what. Further, I'm so aggravated with the dual operating system, I've been looking at products to replace Quicken, so if anyone knows of a good home, small business and home rental financial product they can recommend, I'm all ears!
               If I do a full restore, it will restore . . . and partioned drive
If there are 2 partitons, a full restore only restores the OSX partition. If a non-OSX partition was backed-up, it must be restored separately.
               Now that I've said I only have 1 partitioned drive, does that mean it will restore the partitioned drive? I would prefer it did not. It seems now that it would be much cleaner to restore the OSX drive. Would I be able to do that?
So, depending on the exact circumstances, your best be may be to restore the most recent OSX partition, then restore/copy those files that were backed-up on another drive; reinstall VMware if necessary; restore the other partition.
So . . . things may be a bit more complex than we though, but perhaps less dire.
More detail on the various partitions and backups should clarify things.

HT1473 I recently had to replace my hard drive and lost my iTunes library. Now I cannot transfer the library from my iPod to iTunes on the new hard drive (same computer). How can I complete the transfer?

I recently had to replace my hard drive and lost my iTunes library. When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?

Recover media from iPod
See this post for options on moving your iPod data back to your computer.
tt2

500 gb new hard drive with 4 gb ram .. why can't i install mountain lion???

Similar Messages

Maybe you are looking for