500 GB Time Capsule Working Fine UNTIL Time Machine tries to Backup

Hi There-
My 500 GB Time Capsule seems confused. It is extending a wireless network (from another Time Capsule).
The light is green, and the signal is great---until I tell Time Machine to backup. Time Machine says that it is "Preparing Backup...". After an hour or more of "Preparing" I get an error message that says the backup failed and it was unable to connect. Then I go to the Time Capsule, and the light is blinking Amber and I can't find it.
I unplug the power source from the Time Capsule and plug it back in...and the light is back green! Furthermore, I can see the Time Capsule mounted in "Finder" under "Shared."
My computer is completely updated. The Time Capsule was working fine at one point. Now it isn't.
Thanks, guys & girls.

I'm in a similar situation with 3 Apple laptops (Macbook Pro 15" 1 week old, Macbook Pro 17" 2.5 yrs old and iBook G4 4 years old) and Time Capsule 500GB (latest model dual WIFI, bought 2 weeks ago).
Macbook Pro and iBook did backups without problems, iBook on the 2.4GHz and the other on the 5GHz band. The Macbook Pro 17" is 5 to 10 times slower in the backups than the iBook. But - still - it works.
When I connect the second Macbook Pro (15"), Time Capsule become instable and reboot casually without reasons. It reboots casually, and frequently (from 5minutes to 30 minutes intervals).
Now: turned off the iBook and connected the computers via cable LAN to TC and the problem remain the same. These 2 Macbook Pro backing up at the same time : Time Capsule become instable. Strangely only with the 2 macbook pros, not the iBook.
I really don't manage to understand why, and from where to begin to search to solve the error. The only think I did was checking the logfile in the Time Capsule but no bessages about errors. Simply the message when it restarts.
I never arrive to complete one backup. BUT only when the 2 Macbooks Pro are doing the backup at the same time! One at time works. Slow, but works.
TC worked well during these 2 weeks until I added the Macbook Pro 15" to the WIFI net. Someone knows if one "maybe somewere faulty" computer can hang TC ?
Other infos:
All the macs are on 10.5.7, all updates done. TC is on the 7.4.1 firmware. All the units are in the same (small) room. Except for these backups, all the computers works well (internet browsing, email, printing via TC, downloads, ...).
Appreciate any help / question that can help me to investigate
...sorry for my spaghetti english (-:
damon

Similar Messages

HT203177 My backups using Time Machine to my Time Capsule worked fine until a week ago. Since then it gets stuck on "Preparing ...". I have left it preparing overnight and it doesn't get past this stage. What else can I do? Bob

My backups using Time Machine to my Time Capsule worked fine until a week ago. Since then it gets stuck on "Preparing ...". I have left it preparing overnight and it doesn't get past this stage. What else can I do?

Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want.

When my time machine tries to backup to my time capsule I get the following message"The backup disk image "/Volumes/Data/Kent's MacBook Pro.sparsebundle" is already in use. " What do I need to do to fix this?

When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?

Restart the Time Capsule.

What is Time Machine Trying to Backup

I have a 120 gb drive on my MBP, and I have set TM to backup the entire drive onto my Time Capsule. It shows an estimate of 109 gb for the entire backup, but when I start the backup it shows it is trying to backup 457 gb of data. Where is it pulling that from if I only have a 120 gb drive?

Kappy wrote:
Yes, it will if the drive is shared through File Sharing and mounted. I have tried it. As long as the drive is 'seen' in the TM devices list. TM is supposed to automatically exclude any device it cannot backup or backup to.
Are you sure? Was that perhaps in a Beta or early version of Leopard?
I just tried it, and can't get the shared drive to show up in the exclusion list. It's formatted properly (and I can copy to it over my network), and the TM exclusion prompt shows everything on the other Mac grayed-out, so I can't select it, even if I give "everyone" read & write rights on the other Mac.
And with it not excluded, if I exclude everything else, the backup fails saying there's nothing to back up.
(On Leopard, the exclusion prompt shows everything in black, and lets me select it, but it still doesn't appear in the exclusion list.)

Document versions making time machine have huge backups?

Time machine was working fine until i recently restored a backup last week. Afterwards i backed up everything but now i have noticed that every backup is over 800mb, for no reason. To test this, I backed up my mac, it was a 1.5GB backup, then 1 min later backed it up again and the backup was 1.3gb. So i downloaded time tracker, and found on several recent backups that there was this folder named .DocumentRevisions-V100 and it was in red. So i went to Time machine preferences and clicked options> exclude and went to Macintosh HD with show invisible folders ticked and excluded .Document Revisions folder. Just then i backed up my mac 7 times and all backups were 45 mb or less and everything now seems ok, but can you tell me any possible consequences of excluding this file form backup and why it was creating such huge files anyway? and what should i do about it?

It's possible the document revisions is corrupt. The way it is organized, it should only backup what changed. Sounds like it was backing up the whole folder.
If you exclude it, you won't be able to use Time Machine to restore previous internal revisions. You could still go back and grab previous saved versions. You just wouldn't be able to use the Versions feature to grab portions of a previous revision and insert it into the current version.

I've got an apple 3TB time capsule. It was working fine until we moved to a new house. The day the ISP showed up to upgrade my speed it stopped working. Now will not pick up signal. What happened what do I do?

I've got an apple 3TB time capsule. It was working fine until we moved to a new house. The day the ISP showed up to upgrade my speed it stopped working. Now will not pick up signal. What happened what do I do?

What signal is it picking up? Are you joining wireless network? If so don't.. it is really poor way to run things.
Is it connected to a cable modem? Full router or just a modem type?
Try a reset?
Plug in via ethernet.. turn off everything.. wait 5min then restart cable modem.. if that doesn't work, give it a longer off cycle.. 15min or overnight.
We need more info.

"I have a 5th generation time capsule. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal.

"I have a 5th generation airpot extreme. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal. I shut down my Mac, unplugged the modem, router, let sit for 10 seconds, started it up and 'presto' everything worked. Then yesterday all but the macbook stopped receiving wifi again. I tried the same scenario as the other day but nothing. I reset the airport extreme to factory settings and still nothing. Is the airport extreme not working?

If it was not working the Mac would not get a signal. Restart the IOS devices and reconnect to the network

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

After the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck

I purchased a new iphone 4 last week and it has worked fine until yesterday the screen was freezing. I have restored from a back up a few times but this does not help. Any thoughts?

I purchased a new iphone 4 last week and it has been working fine until yesterday the screen was freezing. Today I have restored factory settings and restored settings from a back up from a previous iphone 3G. The restore has not fixed the freezing issue. Any thoughts?

Only a week old? Take it back and get a new one one....call that one DOA,

Time Machine fails to backup HD and stalls computer when backing up to external HD (Western Digital WD5000MT) when using Firewire 800 but works fine using USB

I have a mid 2012 MBP (MacbookPro9,1) running Mountain Lion 10.8.2. When I start a Time Machine backup to an external Western Digital HD (WD5000MT) connected using a Firewire 800 cable, my open programs stop responding and in general my computer freezes up not allowing me to open activity monitor or the console utility. I can't even shut down or restart my computer and must hard boot to reset. Though removing the firewire cable that goes to the external HD can sometimes get my system working again. However, the WD external HD also has a usb port and when I connect it to my computer via a USB cable, Time Machine seems to backup my system fine without stalling my computer. This same external HD worked fine with Firewire 800 using my old late 2007 MBP running snow leopard. I should note that my brother has the exact same model WD external HD and he also had issues with the firewire port on his MBP running mountain lion. I have run the disk utility checking for disk/file permission errors and the drive itself seems fine. I initially formatted that drive as ExFAT but while troubleshooting reformatted to HFS+ and still had the same issue. I tested using a different firewire 800 cable but still had the same issue. Can't think of anything else to do. I don't have another firewire-compatible device to test if it is the HD vs the firewire port. I would prefer to use the firewire port for quicker transfer speeds but I'm stuck with USB for now. Any suggestions?

Maybe these will help:
http://pondini.org/TM/Troubleshooting.html
http://support.apple.com/kb/PH11194
http://support.apple.com/kb/HT3275 (note - older article)
Have you tried looking at the Western Digital web site to see if you can find anything?
http://support.wdc.com

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image "/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX's MacBook Air.sparsebundle" is already in use." Same time capsule has worked in the past.

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.

First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

TS1550 Time Machine worked fine w. new HD for 16 backups, but started giving this mssg: [TIME MACHINE COULDN'T COMPLETE THE BACKUP TO "TOSHIBA EXT" ...An error occurred while creating the backup folder]

Time Machine worked fine w. new HD for 16 backups, but started giving this mssg: [TIME MACHINE COULDN'T COMPLETE THE BACKUP TO "TOSHIBA EXT" ...An error occurred while creating the backup folder]

Make sure your hard drive is formatted properly for the operating system installed. Go to Apple menu -> About This Mac to determine what it is. You posted to the 10.5 forum, but your signature says you have 10.9. Here is the tip on what formatting supports what operating systems:
https://discussions.apple.com/docs/DOC-3003

Macbook to TV, Works fine until I put the Macbook to sleep then tv display

Macbook to TV, Works fine until I put the Macbook to sleep,
I wake the Macbook with external keyboard and the display shows up on TV just fine for a second or two then it looks like something changes and then it starts rolling.
It does not do this when Macbook is awake it only does it after it's put to sleep.

Probably the resolution is switching from a mirrored resolution to some other resolution that the TV can't work from. Try this; shut down the MacBook. Cable up the TV to the MB and also the external keyboard and mouse. Hold down the Shift key on the external keyboard, hit the start button on the MacBook and immediately close the lid on the MB after you've hit the start button. Continue holding the Shift key down on the external keyboard until you see the grey screen with the spinning gear at which time you can release the Shift key. The MB should now finish starting up in Safe mode with only the external screen being on. Hopefully the screen will not be rolling.
Once the MB finishes booting, go into System Preferences/Displays and set the resolution to the optimal/desired resolution for your TV. Hopefully this choice will stick through subsequent restarts and also correct the issue of the rolling screen under the conditions in the scenario you described.

I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300          "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp        = "MF Toolbox Ver4.9"
CNCRFN           = "MF8300"
CNC.MDL          = "Canon MF8300"
CNC.SRS          = "Canon MF8300 Series"
CNC.DeviceDesc   = "Canon MF8300"
CNC.SPInfo       = "Canon MF8300 Scanner"
CNC.TwainDS      = "Canon MF8300 Series"
CNC.ColorGear    = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName     = "WIA Canon MF8300 Series"
greeting
Sixten

How I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone.

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

500 GB Time Capsule Working Fine UNTIL Time Machine tries to Backup

Similar Messages

Maybe you are looking for