500 Go Drive modules with MacOS server 10.3.9

Hello,
I need to expand an Xserve/Xraid system with new disks. because 400 GB disks are no longer available i got the 500 GB instead. I read on the box "requires Xserve G5 and Mac OSX server v10.4.3 or later). Is it absolutely necessary to install v10.4.3 ? Couldn't these 500 Go disks work with the current 10.3.9 system version ?
Thank You
Pierre

Pierre
500gb drives work just fine with 10.3.9
Ed

Similar Messages

Can't get My Book AV 500 esata drive working with Motorola QIP-7216

Scenario1: When I connect external drive to DVR, I'm prompted on TV that external drive is connected, and it will be erased. Select "accept" or "reject". I click "accept", and nothing happens.
Scenario2: I go to "Enable More Storage", I follow the steps, and set-top box reboots. When the DVR comes back up, I still don't see the external drive under "Recorder Status".
Verizon tech support has been little help. When I first called, the rep had not idea about external storage functionality. The 2nd rep that I chatted with, replaced my DVR, this didn't help. The 3rd rep that I chatted with told me they couldn't issue commands to my DVR because it was during off hours.
So I've tried two DVRs, and no success.
Tech details:
Western Digital My Book AV 500
Motorola DVR QIP-7216-1, Release: 1.9, Build: 10.95
Please help!

Hey, sorry you're having difficulties getting the external storage to work properly! I am not familiar with this particular drive, though I have heard of it. Is it a brand new drive you're using specifically for additional storage, or have you used it with a different device/computer previously? I'm wondering if it may be due to how the hard drive is partitioned/formatted. My suggestion would be to refer to the manufacturer instructions for formatting the drive within windows if possible, and once that's done, try it again on your DVR. Feel free to post back here or shoot me a PM to discuss further. Thank you!
Travis S.
Verizon Telecom Social Media Team

No suitabel driver SQLException with Managed Server

Hi,
I have created a managed server and configured it to listen to a particular IP
address. When I try to access a jsp file which uses mssqlserver4 driver, with
this managed server; i get following exception...
java.sql.SQLException: No suitable driver
whereas if I access same page through administrator server (I've used myserver
as administrator server), I get the expected output.
I've checked the classpaths for both the managed servers as well as the administrator
server, and they are identical.
Could any one give me some suggestions?
Thans in advance,
Anand

This error usually is caused by the fact no driver was found that understand the URL
provided to connect to the database. Look closely at the URL for the database
connection.
Anand wrote:
Hi,
I have created a managed server and configured it to listen to a particular IP
address. When I try to access a jsp file which uses mssqlserver4 driver, with
this managed server; i get following exception...
java.sql.SQLException: No suitable driver
whereas if I access same page through administrator server (I've used myserver
as administrator server), I get the expected output.
I've checked the classpaths for both the managed servers as well as the administrator
server, and they are identical.
Could any one give me some suggestions?
Thans in advance,
Anand

Problem using odbc driver 10g with SQL Server 2005

We are getting following error. Any solution?
cannot retrieve the column codepage info from the OLE DB provider

there is an additional error message
The output column SR_CONTACT_POINT_ID (58) has a precision which is not valid. Precision must be between 1 and 38.

Proper drive modules for a G5 Xserve?

Hi all,
We need up upgrade the drive modules in a G5 Xserve. I checked in the apple store, and the 750 GB SATA modules have this line:
"These Serial ATA Apple Drive Modules are qualified for use only with the new Intel-based Xserve. For Xserve RAID or older Xserve (G4 based) products, use the Apple Drive Module with Ultra ATA (parallel) support only. For Xserve G5 systems, use the previous generation Serial ATA drive modules."
The problem is, I don't see this "previous generation Serial ATA drive modules" anywhere. Similarly, the Ultra ATA drives have this line:
"These Ultra ATA drives are qualified for use with Xserve RAID only. For Xserve G5 or Intel-based products, use the Apple Drive Module with Serial ATA only. "
My question is, what drive modules should I be using?!
Also, does anyone think Apple will be coming out with 1 TB modules in the near future, and if so, what are the odds of compatibility with the G5 Xserves?

Hey guys,
A heads up.. I've had 4 flavors of SATA ADM:
1. 80GB SATA Hitachi (xserve g5 gen)
2. 80GB SATA Seagate (intel gen)
3. 250GB SATA (xserve g5 gen)
4. 750GB SATA (intel g5 gen)
Needless to say, all 4 work in either the xserve g5 or intel, and either can boot as long as the partioning is setup appropriately (guid or apple). With that said, there actually is a GB size difference between the 2 80GB models, which does make life complicated if you have an only xserve g5 and want to get a new 80GB to make a raid 1 (either the solution is to look for an older model on ebay or to wipe both drives).

Problem with Reports Server and invalid DB packages when release code

Hello,
I'm not certain that this is a Reports issue or not, but wondered if anyone had encountered similar. We've recently upgraded from Forms and Reports 6i to 10.1.2.0.2. A couple of times now, after doing a release of code to our environment, we find that the next request to the Reports Server generates a 'existing state of packages has been discarded' error. Submitting exactly the same report request a second and subsequent times works fine.
However, we always make sure we recompile all invalid packages after a code release; and our Forms front-end doesn't encounter any errors like this. Is there some possible issue with using existing Reports engines to run reports after a code release - should we be bouncing the Reports server..?
Thanks,
James

Hi. Thanks for your quick response. The contain of StrSql is:
"SELECT IdTipo FROM TIPOSTELEFONO", where IdTipo id a column of TIPOSTELEFONO Table.
I tryied the same sql setence with SQL Server Management Studio Express and it works fine. Already I have tryied with others sql sentences. All they worked fine in SQL Server Management Studio, but not with my java example using sqljdbc4.jar.
sqljdbc4.jar documentation comment that these driver work with sql server 2000 to sql server 2008. I'll ask this cuestion in Microsoft forums.
Thanks.

Xserve G5 Drive Module meets Apple Store Lunacy

Dear Apple,
I don't understand... you force me to buy drive modules from you which I'm cool with. But you only give me a 74GB option?!? Seriously. Program me a drive larger than 74GB and make me pay a fortune for it, but don't leave me with only one option and nothing else. This really discourages me from wanting to buy more Xserves.
I feel very like a very disappointed customer right now.
Michael

Here is the link to the 750GB SATA for Xserve G5 from the Apple store:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6C0 4E172&nplm=MA504G/A
But the bottom of the page states this:
Apple Drive Module Serial ATA Compatibility: These Serial ATA Apple Drive Modules are qualified for use only with the new Intel-based Xserve. For Xserve RAID or older Xserve (G4 based) products, use the Apple Drive Module with Ultra ATA (parallel) support only. For Xserve G5 systems, use the previous generation Serial ATA drive modules.
The problem being experienced by the original poster is what brought me here! I went nuts yesterday trying to track down just what drive modules are available for the Xserve G5!
Message was edited by: iGary

Problem in soademo registering FulfillmentESB with ESB Server

Hi,all
I am a beginner in soa suite. Now I am stuck in a problem about registering FulfillmentESB module with ESB Server in soademo. The ESB registeration summary dialog display this error message:
Entity Deployment Failed
error code: 1003 : 5
summary: Failed to create System "Fullfillment"
Fix: Ensure that the (a) Repository is available. (b) The Connection information for the Repository is Valid. Also verify the detailed cause of error if available. Contact Oracle Support if error not fixable.
Then I try to enter the ESB Control from the SOA page. After logon, I can't see anything in the ESB Control. It seems like the ESB IS is not connecting to the backend DB. But How can I solve this problem?
Any help would be appreciated!
Peter

Dear Martin,
First of all I should thank for your attention. In order to save time, I should say that another thread is started regarding this problem, so to have a better focus I am inserting messages that may give some clues here too.
1. Regarding service OLITE, I should say that there is no service with this name. I think it is because I have used recommendations of soademo and used oracleXE database. If I'm right.
2.I am using DHCP, and all of the things are installed on my laptop, and there would be no need to other network resources.
3.In hosts file there is only one line :
127.0.0.1 localhost
4.Windows firewall has been activated but some exceptions have been available.
The exact messages in log files are followed:
default_group_home_default_group-1:1.Unable to create a connection to "karimi_vaio/192.168.32.55:12,601" as user "null".
javax.jms.JMSException: Unable to create a connection to "karimi_vaio/192.168.32.55:12,601" as user "null"
2.<2007-04-28 00:53:27,859> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://karimi_vaio:8888
oc4j\log :1.deployment failed with error
2.Entity Deployment Failed
Thanks in advance

Windows Server 2012 C Drive gets always full with exchange server 2013 installed

Hi All
My C drive gets full always with exchange server 2013 installed what would be the reason because this is causing extremely bad to my environment can somebody help me please
Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and Governance

Hi,
Based on your description, I understand that this issue (C drive gets always full) occurred after Exchange
Server 2013 installed.
à
But my exchange server is installed in different Drive (EX: D)
I suggest that you should check file system to see what folders or files are taking up the space recently.
This issue may be not related to Exchange server.
Please refer to the following article and enable Disk Cleanup Utility. Then monitor the result.
Enabling
Disk Cleanup Utility in Windows Server 2012
Meanwhile, please check if the winsxs directory is growing bigger.
How
to Reduce the Size of the Winsxs directory and Free Up Disk Space on Windows Server 2012 Using Features on Demand
By the way, please check if you have installed update rollup 2836988. I noticed that Windows.edb file grows
very large. For more details, please refer to the following KB.
The Windows.edb file grows very large in Windows 8 or Windows
Server 2012
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Sql Exception on Testing Configuration with SQL Server JDBC driver for XA

I have a requirement of analyzing the behavior of SQL Server JDBC data sources for XA transactions in our application.We have been using Non-XA drivers for both Oracle and SQL Server as we had no requirement for transactions spanning across multiple databases in past.I have setup and tested the XA driver for Oracle (Oracle Driver (Thin XA) for Instance Connections 9.0.1,9.2.0,10,11) in Weblogic 11g and its working perfectly for transactions spanning across two databases.No when I am trying to configure weblogic 11g R1 for Sql server JDBC driver to support XA transactions with driver details as follows,
Server:Weblogic 11g R1
Driver Type: MS Sql Server
Database Driver :Oracle's MS SQL Server Driver(Type 4 XA) Version:7.0,2000,2005)
Database:SQL Server 2005(Single Instance)
and try to create a new data source and select "Test Configuration" and following error is thrown ,
<Mar 17, 2011 4:49:49 PM GMT+05:30> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [OWLS][SQLServer JDBC Driver][SQLServer]xa_open (0) returns -3
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createAppropriateSQLExceptionInstance(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createSQLException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonTransitionToState(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.executeUpdateInternal(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.executeUpdate(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.open(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection.init(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection40.init(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseClassCreatorForJDBC40.createXaConnection(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXADataSource.getXAConnection(Unknown Source)
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I followed the instruction in weblogic jdbc drivers guide to configure the JTA Transactions to support XA on SQL Server machine and weblogic server which included,
1.Copying sqljdbc.dll copied to SQL_Server_Root/bin directory from WL_HOME\server\lib.
2.Copied instjdbc.sql to sql server machine and executed the script with following output,
Changed database context to 'master'.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover2', because it does not exist or you do not have permission.
creating JDBC XA procedures
instxa.sql completed successfully.
3.Verified that MSDTC service is running on both SQL Server and weblogic machines with XA Transaction enabled and DTC option enabled for both inbound and outbound connections.
4.Copied sqljdbc.jar (version 3.0 downloaded from msdn portal) to "C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver" directory and updated weblogic_classpth variable in commEnv.cmd file.
set WEBLOGIC_CLASSPATH=%JAVA_HOME%\lib\tools.jar;%BEA_HOME%\utils\config\10.3\config-launch.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%FEATURES_DIR%\weblogic.server.modules_10.3.2.0.jar;%WL_HOME%\server\lib\webservices.jar;%ANT_HOME%/lib/ant-all.jar;%ANT_CONTRIB%/lib/ant-contrib.jar;C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver\server\ext\jdbc\sqlserver\sqljdbc.jar
Can some one please provide some input on whats causing this and any other steps needs to be followed to implement XA support using SQL Server JDBC driver.

You seem to have done everything correctly and diligently. I would ask that you open
an official support case.

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

Dv7-3169 replaced my 640 hard drive with a 500 hard drive can i use my recovery disks

hard drive is failing on dv7-3169 laptop i have replaced the 640 hard drive with a new 500 hard drive, the recovery disks start to work and then say cannot set up partition on hard drive or install recovery system

i bought this new oem at computer rennaisance. they tell me it does not matter the size of the hard drive, even though it is small er than the one that came in computer. they said make sure new hard drive is initialized. how can i initialize when there is no operating system on hard drive.if i initialize Computer Rennasaince said I should be able to use my recovery disks. cannot initialize without operating system. Thanks Charles

Is there a driver for iR-ADV C5235 compatible with MacOS 10.10 Yosemite?

Hello,
Is there a driver for iR-ADV C5235 compatible with MacOS 10.10 Yosemite? Is it possible to reinstall the driver from an older version?
Best,
Christophe

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have a MacBook Pro with Lion OS do I need a USB 500 GB Drive to successfully backup my computer?

I have recently purchased a MacBook Pro with Lion OS 10.7.1. Do I need a USB 500 GB Drive to Backup my computer?

Do you plan to backup the entire MacBook Pro, or just selected dbcuments?
If you are planning to use Time Machine to backup your Mac in its entirety and then backup the incremental changes as you move forward, you need a drive that is at least twice the capacity of your Mac.
In other words, if you have a 250 GB hard drive on the Mac, then a 500 GB drive (or larger) would make sense for backup purposes.
I have yet to meet the first person who ever felt that they made a mistake by buying too large of a hard drive. They seem to fill up more quickly than you would expect no matter what size you buy.

Using SQLBindParameter, SQLPrepare and SQLExecute to insert a Decimal(5,3) type fails with SQLSTATE: 22003 using ODBC Driver 11 for SQL Server

Hello everyone.
I'm using SQL Server 2014, and writting on some C++ app to query and modify the database. I use the ODBC API.
I'm stuck on inserting an SQL_NUMERIC_STRUCT value into the database, if the corresponding database-column has a scale set.
For test-purposes: I have a Table named 'decTable' that has a column 'id' (integer) and a column 'dec' (decimal(5,3))
In the code I basically do:
1. Connect to the DB, get the handles, etc.
2. Use SQLBindParameter to bind a SQL_NUMERIC_STRUCT to a query with parameter markers. Note that I do include the information about precision and scale, something like: SQLBindParameter(hstmt, 2, SQL_PARAM_INPUT, SQL_C_NUMERIC, SQL_NUMERIC, 5, 3, &numStr,
sizeof(cbNum), &cbNum);
3. Prepare a Statement to insert values, something like: SQLPrepare(hstmt, L"INSERT INTO decTable (id, dec) values(?, ?)", SQL_NTS);
4. Set some valid data on the SQL_NUMERIC_STRUCT
5. Call SQLExecute to execute. But now I get the error:
SQLSTATE: 22003; nativeErr: 0 Msg: [Microsoft][ODBC Driver 11 for SQL Server]Numeric value out of range
I dont get it what I am doing wrong. The same code works fine against IBM DB2 and MySql. I also have no problems reading a SQL_NUMERIC_STRUCT using SQLBindCol(..) and the various SQLSetDescField to define the scale and precision.
Is there a problem in the ODBC Driver of the SQL Server 2014?
For completeness, here is a working c++ example:
// InsertNumTest.cpp
// create database using:
create a table decTable with an id and a decimal(5,3) column:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE[dbo].[decTable](
[id][int] NOT NULL,
[dec][decimal](5, 3) NULL,
CONSTRAINT[PK_decTable] PRIMARY KEY CLUSTERED
[id] ASC
)WITH(PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON[PRIMARY]
) ON[PRIMARY]
GO
// Then create an odbc DSN entry that can be used:
#define DSN L"exOdbc_SqlServer_2014"
#define USER L"exodbc"
#define PASS L"testexodbc"
// system
#include <iostream>
#include <tchar.h>
#include <windows.h>
// odbc-things
#include <sql.h>
#include <sqlext.h>
#include <sqlucode.h>
void printErrors(SQLSMALLINT handleType, SQLHANDLE h)
   SQLSMALLINT recNr = 1;
   SQLRETURN ret = SQL_SUCCESS;
   SQLSMALLINT cb = 0;
   SQLWCHAR sqlState[5 + 1];
   SQLINTEGER nativeErr;
   SQLWCHAR msg[SQL_MAX_MESSAGE_LENGTH + 1];
   while (ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO)
       msg[0] = 0;
       ret = SQLGetDiagRec(handleType, h, recNr, sqlState, &nativeErr, msg, SQL_MAX_MESSAGE_LENGTH + 1, &cb);
       if (ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO)
           std::wcout << L"SQLSTATE: " << sqlState << L"; nativeErr: " << nativeErr << L" Msg: " << msg << std::endl;
       ++recNr;
void printErrorsAndAbort(SQLSMALLINT handleType, SQLHANDLE h)
   printErrors(handleType, h);
   getchar();
   abort();
int _tmain(int argc, _TCHAR* argv[])
   SQLHENV henv = SQL_NULL_HENV;
   SQLHDBC hdbc = SQL_NULL_HDBC;
   SQLHSTMT hstmt = SQL_NULL_HSTMT;
   SQLHDESC hdesc = SQL_NULL_HDESC;
   SQLRETURN ret = 0;
   // Connect to DB
   ret = SQLAllocHandle(SQL_HANDLE_ENV, NULL, &henv);
   ret = SQLSetEnvAttr(henv, SQL_ATTR_ODBC_VERSION, (SQLPOINTER)SQL_OV_ODBC3, SQL_IS_INTEGER);
   ret = SQLAllocHandle(SQL_HANDLE_DBC, henv, &hdbc);
   ret = SQLConnect(hdbc, (SQLWCHAR*)DSN, SQL_NTS, USER, SQL_NTS, PASS, SQL_NTS);
   if (!SQL_SUCCEEDED(ret))
       printErrors(SQL_HANDLE_DBC, hdbc);
       getchar();
       return -1;
   ret = SQLAllocHandle(SQL_HANDLE_STMT, hdbc, &hstmt);
   // Bind id as parameter
   SQLINTEGER id = 0;
   SQLINTEGER cbId = 0;
   ret = SQLBindParameter(hstmt, 1, SQL_PARAM_INPUT, SQL_C_SLONG, SQL_INTEGER, 0, 0, &id, sizeof(id), &cbId);
   if (!SQL_SUCCEEDED(ret))
       printErrorsAndAbort(SQL_HANDLE_STMT, hstmt);
   // Bind numStr as Insert-parameter
   SQL_NUMERIC_STRUCT numStr;
   ZeroMemory(&numStr, sizeof(numStr));
   SQLINTEGER cbNum = 0;
   ret = SQLBindParameter(hstmt, 2, SQL_PARAM_INPUT, SQL_C_NUMERIC, SQL_NUMERIC, 5, 3, &numStr, sizeof(cbNum), &cbNum);
   if (!SQL_SUCCEEDED(ret))
       printErrorsAndAbort(SQL_HANDLE_STMT, hstmt);
   // Prepare statement
   ret = SQLPrepare(hstmt, L"INSERT INTO decTable (id, dec) values(?, ?)", SQL_NTS);
   if (!SQL_SUCCEEDED(ret))
       printErrorsAndAbort(SQL_HANDLE_STMT, hstmt);
   // Set some data and execute
   id = 1;
   SQLINTEGER iVal = 12345;
   memcpy(numStr.val, &iVal, sizeof(iVal));
   numStr.precision = 5;
   numStr.scale = 3;
   numStr.sign = 1;
   ret = SQLExecute(hstmt);
   if (!SQL_SUCCEEDED(ret))
       printErrorsAndAbort(SQL_HANDLE_STMT, hstmt);
   getchar();
   return 0;

This post might help:
http://msdn.developer-works.com/article/12639498/SQL_C_NUMERIC+data+incorrect+after+insert
If this is no solution try increasing the decimale number on the SQL server table, if you stille have the same problem after that change the column to a nvarchar and see the actual value that is put through the ODBC connector for SQL.

500 Go Drive modules with MacOS server 10.3.9

Similar Messages

Maybe you are looking for