500 Internal error observed while accessing a Static Web based course

Hi Experts
When I try to start a static web-based course in portal, a 500 Internal server error comes up on the screen and the course not played at all.
Please suggest.
Regards
Shaily

Hi Shaily,
Give some more details about product and also share screen shot for error
Regards,
Dhuvaraganathan M.

Similar Messages

An error occurred while accessing the content repository from JDeveloper

Hello,
I'm using Jdeveloper Studio Edition Version 11.1.1.5.0
I created Content Repository conection, following:
RIDC Socket Type: socket
Server hostname: localhost
Content Server Listener Port: 4444
Executing "Teste Connection" result "Success!"
But, trying connect, I receive:
oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic listFolder
An error occurred while accessing the content repository.
and when I login to my portal and go to administration page, then I am getting this error
"Messages for this page are listed below.
Could not retrieve members from policy store.
and when I go to services tab then i am getting this error "The Documents service is unavailable.
Error contacting the content repository."
Please help me to resolve this problem.
Thank You,
Muhammad Nasir

can anybody help me to resolve this issue please.

ECP / OWA 500 internal error message

Good Afternoon all;
We have just installed our first Exchange server (2013 SP1) on a 2012 r2 Standard server.
The installation went without any errors. I installed the mailbox and client access in one server. I followed technet 2013 help for installation (https://technet.microsoft.com/en-us/library/bb691354%28v=exchg.150%29.aspx).
After installation , I can open up the toolbox and the exchange powershell without any problems.
However, when I try to access https://localhost/owa or ecp , I can put my username and password (domain\username and password) , it gives a 500 internal error.
I have tried the following
Resetting iis with iisreset (https://social.technet.microsoft.com/Forums/exchange/en-US/2f64d305-e9e2-4f48-a5b4-4f72d7bca801/exchange-2013-owaecp-http-500-internal-server-error?forum=exchangesvrclients)
Tried logging in with https://servername/ecp or owa (http://www.alihassanlive.com/e2k3/2014/2/9/cannot-open-eac-in-exchange-2013-500-internal-server-error.html)
I did this redirect thing, it did not help (http://msexchangeguru.com/2013/10/30/http-redirect-owa-ecp/)
Tried the netbios name (exchange) , it did not help, also tried netbios.domainname , it did not work either (http://community.spiceworks.com/topic/568178-http-500-internal-server-exchange-2013-ecp)
I CAN NOT FIND THIS SERVICE ON MY SERVER , if someone knows how to enable or find it, that might be my problem(
Make sure that the Microsoft Exchange Forms Based Authentication service is started. ??? Any ideas where I can find this service , I looked everywhere and did not see it.
I have not deleted the ECP or OWA directories from IIS yet.
I did do the authentication stuff (enabling windows authentication, forms etc.)
Any ideas WHY am I having the error message still ?
Note : We have a lab , and only 2 servers, one has the AD and the other one is only exchange server.
Thank you
Note 2 : I have not done anything with AD after I installed exchange server (the user thats logging into exchange server is the administrator in the AD)

Hi Yigit,
Thank you for your question.
We could refer to the following steps for troubleshooting:
Change different browser to check if the issue persist
Make sure the difference in clock settings between the DC and the Exchange server is greater than five minutes. Try synchronizing the time between DC and Exchange server
Restart Exchange server and make sure Exchange ping DC without any problems(including DNS)
Turn off AD and Exchange’s firewall which is build-in to check if the issue persist
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

A network error occurred while accessing this document on the internet

Dear all,
I am now facing a very unusual problem that, when I try to open a pdf file from internet, it says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?". Here's my situation:
Browser: IE8 (or Chrome 35.0.1916.153)
Adobe Reader: 11.0.0
OS: Win7
1.Directly open from IE. Says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?"
2.Try to download(Save AS). In IE, says: "The connection was reset The connection to the server was reset while the page was loading"; In Chrome, nothing happened, but still can't download.
3.Try to disable the "PDF Reader Addon" in IE8. First the browser needs to download the PDF file, but failed, see point 2.
1.I can open the same PDF file from another network, that is, out of my company.
2.I can open another PDF file in the network of my company, but the pdf is created by another scanner
3.All PDFs from both scanner can be opened locally.
So, here's the possible problem, the network settings, and(or) the PDF. Does anyone ever meet this situation, please help?
Thank very much.
Li

Rave,
IE: 8 & 9
Adobe Acrobat Pro/Acrobat Reader 10.x & 11.x
Chrome: work fine
So the answer is to manually enable and disable websites based on whether the pdfs open within the browser. That doesn't seem like a great long-term solution to have have our users to manually enable / disable browser integration. We have web applications that work better with browser integration turned on. Is this something that Adobe will fix or is it an IIS/IE issue.
It appears the Adobe removed the #1 config option that you lised in the new 11.x versions of both products. The manage Add-ons does not disable the browser integration on the new Adobe versions.

An internal error occurred while calling 'submitReport' API. (Error: ERR_WI

An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
We get above mentioned error message at any point in WebI Rich Client.
DataSource: Teradata 12.0 (Local machine)
BO XI 3.1 Client installed on local machine
Universe (Secured connection)
WebI : desiging and creating in Standlone mode
WebI client version : 12.1.0.882
Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
3) Draging out the mesaure or dimension from report (only 2nd error)
Report is simple and no other stuff except the cross tab table
Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.

You can have a look here:
Input Controls with Break Error on webi report
http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
Re: internal error occurred while calling the 'submitReport' API.
I'm Back
HAPPY NEW YEAR

ORA-00607: Internal error occurred while making a change to a data block

hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start database

Duh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC

An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)

Hi ALL,
I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
The error message scrnshot:
This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
Recently we had upgrade of BO 4.0 SP7 patch 9.
The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
Would be thankful for any help recieved in resolving the above issue.
Regards,
Jaywant Kulkarni.

Hi jaywant,
Please check the note: 1760827 it may be helpful
( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
Scenario 1:
Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
Suggested Solution:
Modify problematic report in Webi.
Change the prompt definition to be a constant, run the report in Webi, and save it.
Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it.
Re-open the report in InfoView and refresh.
Scenario 2: Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
Suggested Solution:
Remove the merged dimensions and then re-establish them.
Scenario 3: Error occurs when the InfoView report has been open and idle for a long time.
Suggested Solution:
This error can be an indication of a time-out, based on the server’s settings. Make sure you save your work often. You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.

An internal error occurred while writing imported graphics in this document. The file has been saved

An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
How do i fix this, there are no images in the document
thanks
emma

We are running FM version 7.2b144 on MS Win xp Pro (32 bit), and I did not notice this until service pack 3 was installed. I believe I have found a work around to the situation and another contributing cause. If graphic files are placed directly in an anchored frame instead of importing by reference, the file somehow becomes misplaced. If you right click the graphic and open the Object Properties dialog box, and see the phrase "no referenced file" below Main Editor: Referenced File: in the lower left hand corner, this has happened. I found if I removed all graphics files without references and imported them by reference, the source file may then be properly saved. I am also using a program called CCleaner, which removes cookies, temp files, browsing history and the like from a system. If the program settings are chosen too aggressively, and the application runs when FM has a file open, this same error will occur, even if all files are referenced properly. I don't know if SP3 has some similar application which is now running in the background and causing this.
To summarize, if you want to retain SP3, I have eliminated this error by confirming the links to referenced graphics files and avoiding using 3rd party "cleaners" while FM is open.

Error occurred while accessing application id Excel services application unattended service account from secure store service

Hi,
I follow up the book "Professional SharePoint 2013 Administration" to build the SharePoint 2013 BI include Excel Services. and created the Secure Store services to save the user SP_Install for member.
For Now, I can upload the worksheet and open it in browser, but when I tried to refresh it, the SP 2013 show error "Error occurred while accessing application id Excel services application unattended service account from secure store service".
does anybody can help ? and do I need to turn on C2WTS ?
Thanks
James Liang

Hi James,
Excel Services can be used with Secure Store in three primary scenarios:
Unattended Service Account
Embedded Connections
External Data Connections
If you haven't configure unattended service account yet, you could refer to the article below:
http://technet.microsoft.com/en-us/library/hh525344(v=office.15).aspx
More information:
http://technet.microsoft.com/en-us/library/ff191191(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

500 internal error in managhe substitution rule in UWL

Hi All,
One user is getting 500 internal error when cklicks on manage substitution rule in UWL.Only one user is facing this problem.
I checked in backend system, so substitute exists.
Can some body help me what could be the problem? Thanks in advance.
Regards,
Thirun.

Hi Thirun,
This is a common issue and usually has to do if the 'substitutee' for lack of a better word, is no longer a valid user.
4. When there is a substitution rule connecting the current user to a
deleted user, the following problems were discovered:
   - substitution rule management returns 500 browser error;
   - it is not possible to delete a Java Workflow substitution which
refers to a deleted user as assignee;
   - Java workflow connector is not able to retrieve items for user that
has a substitution rule with a deleted user;
   - The "status", "What to do", "assignee" and "Task Owner" fields are
not properly filled in the Manage Substitution Rules view.
Do a search in SAP notes in component EP-BC-UWL and also for your version. Alternatively you can let me know the version here and I can tell you in what release this is fixed in that matches closest to your version. (maybe only a patch required).
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

OBIEE 11G - BI Publisher returning 500 internal error

Hi,
One of the user is getting the 500 internal error wheever she tries to view the BI Publisher report.
1) It is a single sign-on set up. She is the only one who gets this error.
2) She used her id and logged in some one elses computer and she WAS ABLE to view the BIP reports.
3) It is her computer that gives this error.
How to identify the root cause of the issue? I am thinking it could be one of the software installed in her machine, but which one should I check for?
Please help with suggestions. Thanks for your time and help.

You need to setup SA System in order for BI EE security to work with BI Publisher. Setting this up will fix the error that you are listing below. Couple of options for you.
1. Log an SR on supportweb to get sample RPD and table structure for the SA System
2. check the 7.8.x documentation. It had a better description of the SA System than the 10.1.3.2 documentation does.
3. I can email you an RPD and table structure that I have used.
The only thing BIP needs in SA system is user name, group name and user to group assignment. This is needed for two screens in BIP (Roles and Permissions and JDBC connections). It's a bit annoying to have to set this up, but two good things to note. If you setup SA System, then you have additional options for delivery of iBots (that's what SA System is really designed for). The other is that BIP's dependence on SA System is going away in a future release. So this will get easier soon.
Bryan

I am getting this error message while accessing IT2002 Counting rule 2/01/001 does not exist Message no. 3H010

hi All,
I am getting this error message while accessing IT2002
Counting rule 2/01/001 does not exist
Message no. 3H010
Please guide ASAP
Regards,
Ayousef

Hi Ahmed,
Please go through the below mentioned thread.
scn.sap.com/thread/1187160
Regards,
Haranath

Webi report throwing 500 internal error when run

hi all,
when i tried to run one of my report , it is throwing 500 internal error INF; the same does not happen with ohter reports in the same folder.
can someone help on this. I am admin with full rights who is not able to perfom this.
informations:
BO XI3.1 sp3 fp 3.2
bo installed on one seperate server. and hosted on websphere.. and other web deployments made on websphere again.
rgds
shravan

this report is using merge cells and cross tabs which is a bug in the product till XIR3 SP3 FP3.2 so an upgrade to FP3.5 will fix this issue. again. this does not happen with all the reports.
this is the solution given the SAP vendor.
rgds
Shravan

Error occurred while accessing the safe array

I am using HFM 931. One of the users are getting this error.
Error occurred while accessing the safe array. Error Reference Number: {9F7B34B7-4698-48B3-9F2B-A89715675639}
Num: 0x80040211;Type: 1;DTime: 20/10/2009 14:34:08;Svr: UK-SUT-TD-FWEB1;File: CHFMwDataGrid.cpp;Line: 5889;
Can you please help me fix this issue?
Thanks
Hemanth
Edited by: HemanthK on Nov 6, 2009 10:00 AM

there are many different causes for safe array error messages.
i would advise to contact support before looking for help for safe array messages in the forums. if you open an SR be sure to attach HsvEventLog.log file from all application servers in the environment so that the support engineer can check them.
if the message it is restricted to one specific user it may be related to that users preferences / POV settings in the appname_USERPARAMS database table. you may like to try to remove the userparams for that specific user from the table. before you do this you need to make sure that HFM (all HFM related processes and services) is stopped on all servers in the environment and that you have a recent backup of the HFM database.
also please make sure you have patched your 9.3.1 HFM to 9.3.1 SP 4 + SF's 9.3.1.4.01, 9.3.1.4.03 and 9.3.1.4.05. it is recommended that all HFM 9.3.1 administrators have applied all of the above Service Packs and Service Fixes.

500 Internal error observed while accessing a Static Web based course

Similar Messages

Maybe you are looking for