500 Internal Server Error in FiletoFile Scenario

Hi All,
Here we are doing FiletoFile Scenario but not on our Central Instance we are using LocalPlainJ2SE Adapters for both sender and receiever so we configured PlainJ2SEFile Adapters in both ends.In the ID of XI i configured th *XI recievr adapter* and *haven't configured any sender adapter or sender agreements.*
*I did only RecievrAgreements,Recvr determination,InterfaceDetermination*.
But
When we test the scenario file is getting pickedp by the PlainJ2SE file Adapter and also sent to the XI (IS) but we are getting an error in the SXMB_MONI saying that
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>internal server error: java.lang.NullPointerException</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html> <head> <title>Transport Service Error</title> </head> <body> <h1>HTTP/1.0 500</h1> <h3>internal server error: java.lang.NullPointerException</h3> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description internal server error: java.lang.NullPointerException Error while sending by HTTP (error code: 500, error text: internal server error: java.lang.NullPointerException)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Kindly give me some suggestions ??
Thanks,
Kalyan.

>
Kalyan chakravarthy p wrote:
In the ID of XI i configured th XI recievr adapter and haven't configured any sender adapter or sender agreements.
>
> I did only RecievrAgreements,Recvr determination,InterfaceDetermination.
Why didn't you configure Sender Adapter and Sender Agreement ?
I am asking this since, the sender file adapter type determine the payload of the message based on their configuration. The information about the fields of the message header is determined from the corresponding sender agreement for the communication channel. Also the information from the sender agreement is used to construct the address header of the message.Moreover information from the adapter configuration in the sender channel is required for successful inbound processing.
Is it still possible to process message from a file without going for file adapter and SA ??

Similar Messages

HTTP 500 Internal Server Error with Large Attachment in SOAP Scenario

Hi,
we have implemented SOAP - XI - SOAP Scenario in our landscape (Sap Neatweaver Process Integration 7.1) .
One of the functionality of this scenario is the Upload of Documents to External Web Service through standard SOAP Attachment.
If we try to upload a small file (smaller than 20MB), task works fine and the document is correctly uploaded.
If we try to upload a larger file, we encountered in this generic error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1161)
We tried to increase timeout parameters (in communication channel and in ICM Value) but the response is the same.
We verify also if icm/HTTP/max_request_size_KB parameter was set to a value smaller than our file size limit (20MB) but is set to default value (100MB).
The problem isn't on External Web Service Layer because if we try to upload the same documents directly to that web service upload works fine, and in External Web Service's Log there aren''t any indications of this error.
So I ask you: are there any System Parameters to verify to solve this issue?
For additional, in ICM Monitor LOG we can read this WARNING when we call our service:
WARNING => IcmReadFromConn(id=53/454390): temporarily out of MPI buffers -> roll out [icxxthrio_mt 2646]
This warning may be related to the problem? If yes, how can we solve it?
Thanks a lot,
Marcello Ricci

Hi ,
Please answer my following questiosn.
1) which PI version are you using?
2) How many J2EE nodes you have.
please be reminded that SOAP is not for the heavy messages. Then you need to increase your timeout parameters from BASIS.
Rgds
Veeru
Edited by: viru srivastava on Dec 14, 2010 10:18 PM

As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

Hi,
There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
Kindly provide your inputs to help me resolve this.
Thanks,
Ruchi

Hi Ruchi,
500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
Regards,
Udo

Http 500 internal server error while calling webservice

I have a scenario Rfc to webservice
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="HTTP">ADAPTER.HTTP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP 500 Internal Server Error</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In my response pay load i am getting error msg
<b>ClientUnable to parse the incoming request. Please make sure that the request is valid: javax.xml.soap.SOAPException: Unsupported Content-Type: application/xml</b>
</env:Envelope>
Can any one please tell me what would be the problem i have doubled checked the scnrio,i message monitoring i have a messages
Audit Log for Message: ec1dc1d0-f1c7-11da-91dd-0004ac577b32
Time Stamp Status Description
2006-06-01 16:39:52 Success The message was successfully received by the messaging system. Profile: XI URL: http://saptst01.internal.pcshs.com:51000/MessagingSystem/receive/AFW/XI
2006-06-01 16:39:52 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-01 16:39:52 Success Message successfully put into the queue.
2006-06-01 16:39:52 Success The message was successfully retrieved from the request queue.
2006-06-01 16:39:52 Success The message status set to DLNG.
2006-06-01 16:39:52 Success Delivering to channel: ZCH_VERISIGNPPGR
2006-06-01 16:39:52 Success Transform: using Transform.Class: com.sap.aii.messaging.adapter.XSLTConversion
2006-06-01 16:39:52 Success Transform: transforming the payload ...
2006-06-01 16:39:52 Success Transform: successufully transformed
2006-06-01 16:39:52 Success SOAP: request message entering the adapter
2006-06-01 16:39:53 Success SOAP: completed the processing
2006-06-01 16:39:53 Success SOAP: response message received ec89a301-f1c7-11da-a561-0004ac577b32
2006-06-01 16:39:53 Error SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
2006-06-01 16:39:53 Success The message status set to DLVD.
2006-06-01 16:39:53 Success The message was successfully delivered to the application using connection AFW.
Any help would be greatly appreciated.......
Thanks
sriram

Hi,
Content-Type: application/xml
...check for the content type of the message that is sent ot the WS.....with the above mentioned content-type going to the WS currently...WS is not able to parse the req and hence the error....in other words wrong format being being passed.
Regards,
ABhishek.

500 Internal server error while logging in to Webshop URL

Hi All,
I am very new to Java CRM programming and ISA architecture.I am getting an 500 Internal Server error when I am trying to login in to webshop URL http://hostname:50000/xxxb2b/b2b/init.do?xcm.scenario=JCO_NCACLNT708
Could anyone please let me know what went wrong???
Error Log:
500 Internal Server Error
ISA Framework: java.lang.NoClassDefFoundError: com/dow/docbase/ejb/DocbaseCoARetrieve java.lang.Class.forName0(Native Method) java.lang.Class.forName(Class.java:141) com.dow.isa.businessobject.Z_BusinessObjectManager.class$(Z_BusinessObjectManager.java:43) com.dow.isa.businessobject.Z_BusinessObjectManager.getQuery(Z_BusinessObjectManager.java:52) com.dow.isa.util.BOUtils.getQuery(BOUtils.java:137) com.dow.isa.isacore.action.Z_ShopShowListAction.isaPerform(Z_ShopShowListAction.java:90) com.sap.isa.isacore.action.IsaCoreBaseAction.isaPerform(IsaCoreBaseAction.java:378) com.sap.isa.isacore.action.IsaCoreBaseAction.isaPerform(IsaCoreBaseAction.java:418) com.sap.isa.isacore.action.IsaCoreBaseAction.ecomPerform(IsaCoreBaseAction.java:344)
Details: No details available
Regards,
Raj

Hi Easwar ,
Though I am not connected to this error, but interested in the last parameter of xcm.scenario on this URL
http://hostname:50000/xxxb2b/b2b+/init.do?xcm.scenario=JCO_NCACLNT708+*
Is it possible to pass dynamic JCO client name to the xcm.scenario parameter through a SAP portal entry?
And if so, what exactly is required to do this ? I saw a SAP note(SAP Note 1021959 - Portal settings for ISA iViews)
to set parameters and values like xcm.scenario, portal, callbackurl etc in the Portal System Landscape Directory to Key called ISA_B2B = "/init.do?scenario.xcm=<YOUR_XCM_SCENARIO>&portal=yes&autoentry=yes&shop=<YOUR_SHOP>&
callbackurl=<THE_CALLBACKURL_BELOW>"
I have a Portal WDP appln that maintains the values of <YOUR_XCM_SCENARIO> and <YOUR_SHOP>, the challenge is to pass these 2 values to the Portal System Landscape Directory Key( ISA_B2B). I am understanding there could be a .par application that will need to be integrated with the WDP application to update the Key attribute when a user performs some action/event on the WDP Screen ?
Your thoughts and direction will of be big help and much appreciated.
Sincerely,
Portal Developer(Newbie)
Edited by: Portal Developer on Aug 24, 2010 5:30 PM
Edited by: Portal Developer on Aug 24, 2010 5:38 PM

Received HTTP response code 500 : Internal Server Error

Hi All,
In my scenario EANCOM to IDOC, I am getting an error in the sender communication channel (FILE Adapter). It is being picked up from the sender directory successfully but not reaching the XI box (no messages seen in SXMB_MONI).
The error in the runtime Workbench says the following:
Transmitting the message to endpoint http://gdrsap.nestle.com:50000/XIAxisAdapter/MessageServlet? using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Internal Server Error.
Regards,
Manohar

Hi Murli
error code 500 stands for Internal Server Error
This code is the default for an error condition when none of the other 5xx codes apply.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
you have to restart J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points

Invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error

Hi,
I have this error on a SOAP Receiver Channel: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
I've found several threads on SDN Forums about similar errors, but I did not find a solution for my problem yet.
I checked this blog: /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009 Pt.6 applies to my situation, but the proposed solution doesn't solve the problem.
TRACE Messaging System
u2026
2011-06-06 10:59:41.822 Success Delivering to channel: CC_SOAP_RCV_XXX
2011-06-06 10:59:41.823 Success MP: entering1
2011-06-06 10:59:41.825 Success MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2011-06-06 10:59:41.828 Success SOAP: request message entering the adapter with user J2EE_GUEST
2011-06-06 10:59:42.012 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
2011-06-06 10:59:42.014 Success SOAP: sending a delivery error ack ...
2011-06-06 10:59:42.014 Success SOAP: sent a delivery error ack
u2026
Message Details
Address   http://aaa.bbb.be:54000/MessagingSystem/receive/AFW/XI
Credential   PasswordCredential(PIISUSER):password=********
Transport Headers   accept-encoding=gzip sap-xi-messageid=4DEA11FE90003094E10000000AE908B4 content-length=7520 http=POST host= aaa.bbb.be:54000 user-agent=SAP NetWeaver Application Server (1.0;711) content-type=multipart/related;boundary=SAP_4DEA47CEAD3A5138E10000000AE908B4_END;type="text/xml";start="" soapaction="http://sap.com/xi/XI/Message/30"
Configuration Details SOAP Communication Channel
SOAP Receiver Channel
No modules configured
Do not use SOAP Envelope -> NOT checked
If I type the target URL in browser it opens (no login required) and I see the available web services.
Anyone any idea what's the reason for this error?
Thanks in advance
Kind Regards
Edmond Paulussen

Hi Edmond,
We faced similar problem & found alternative.
Try out, if it works for u as well.
1) Use HTTP Adapter instead of SOAP.
Transport Protocol : HTTP 1.0
Message Protocol : XI Payload in HTTP Body
Adapter Engine : Integration Server
Addressing type : URL Address.
Target Host:
Service Number :
Path Prefix:
Authentication type : we hv used Ananymus login, as our login details in payload header.
Content Type : application/soap+xml;charset=UTF-8( this is IMP).
Header Fields.
Name         value
Host           target host
XI Payload Manipulation
XML Code : UTF-8
Hope, this helps...
-santosh.

Received HTTP response code 500 : Internal Server Error using connection Fi

Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
Ramya

Hi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

SOAP Receiver error - HTTP 500 Internal Server Error

Hi,
We have a FILE to SOAP Asynchronous scenario to send data from our PI to customer PI.
We are sending PGP encrypted file as the payload. So, foll settings have been maintained:
Do not use SOAP envelope in Sender and Receiver SOAP
nosoap=true in the URL.
Message transform bean in the SOAP channels.
File is successfully sent and received through SOAP protocol.
But, both the SOAP Receiver and Sender channels are in error:
SOAP Receiver error:
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error.
As, this is a asynch scenario, we are not expecting the response.
SOAP sender at customer PI is in error. Error text is not mentioned. It just displays: error occured.
At both the ends, we do not have Repository objects as there is no mapping.
Kindly help...
Thanks,
Pratibha.

Hi All,
For the same scenario, we need to Sign the data using the WebServices Security.
(We are sending PGP encrypted data as SOAP payload using MTB, i have ticked "Do not use SOAP envelope")
I have selected WebServicesSecurity as the security profile in the SOAP Receiver and selected "Sign" in the Receiver agreement, have provided our private cert.
Tried sending a message. Communication channel audit Log shows the message:
Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
Success SOAP: request message entering the adapter with user J2EE_GUEST
Success SOAP: Web Services Security processing...
Success SOAP: Web Services Security processing skiped. Empty body...
Success SOAP: completed the processing
Please suggest how I can apply the WSS..
Thanks,
Pratibha.

ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error, in Receiver soap A

Greetings All,
In my scenario i am calling external service of SFDC using receiver soap adapter but i am facing below error in the response.
ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error
I am creating the soap structure/envelope using Java mapping since need to add additional parameter in soap header.
I am setting the URL in java UDF using parameter TServerLocation.
In comm channel checked "do not use soap envlope" also set the format to text/xml using MessageTransformBean.
The service was working fine when tested in SoapUI tool.
Looking forword for your help and will be appreciated.
Thanks,
Sandip

Hello Sandip, I hope you are doing fine!
I`m not sure if you are using a sync or async scenario...
The behavior that you describe is the expected behavior for SOAP receiver adapter in nosoap mode, asynchronous case.
The explanation that lies behind it is that in nosoap mode the bahavior is just similar to pure HTTP communication. An HTTP 4/5 error received from the target server is treated as HTTP internal error and logged into AFW as an error. The message in an asynchronous scenario without acknowledgements is normally seen as successful on IE side as it is successfully sent to the target system. It can be even successfully consumed by the target webservice, but for amo other reason, the HTTP request from SAP PI to the target system returns HTTP 500 error.
If you ask for system delivery acknowledgements, you should get a non-successful delivery acknowledgement.
In synchrnous scenarios, when a response is expected, the behavior is different.
If this is a sync scenario, there is an official patch released on the service marketplace. SAP Note 1533195 is released.
In addition to deploying the patch, apply the additional configuration steps. As per this note, for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
you will need to set:
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
If you need to bypass the HTTP errors in the communication with the target system, you need to apply note 1055678.
To apply it, just add for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean in your receiver
channel, Modules tab the following:
Module Key = soap
Parameter Name = XMBWS.NoSOAPIgnoreStatusCode
Parameter Value = false
If you need any SOAP fault related behavior or any other SOAP related feature, you should setup the channel to run normal SOAP mode, since as already mentioned nosoap mode is used now.
In addition, check note:
856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
section "1. Sender Connection"
Q: I get a server error "500 Internal Servler Error" from the
adapter's servlet. What went wrong?
and get the trace to give you more details of the error.
One more thing, VERY IMPORTANT.
I STRONLGY recommend you to update all XI-PI components to latest patch available in the Service Marketplace. Thery are:
XITOOLS, XIESR, XIAF, XIAFC, MESSAGING, XIGUI. Some of them might not be present depending on the release of you system. e.g: 3.0, 7.0, 7.1
I hope this helps you.
Cheers
Jorge Eidelwein

SOAP Sync: HTTP/1.1 500 Internal Server Error

Hi,
                  My scenario is SOAP to SOAP Synchronous. I created WSDL from Id by using (http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=:<service>:<channel>. And Sender interface details.
I am testing SOAP Synchronous scenario through SOAPUI tool. When sending the requrest from SOAP UI i am getting "HTTP/1.1 500 Internal Server Error" error.
Log:
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=null;
When i test the URL in explorer its giving "OK". What will be the probelm? Pls let me know.
Regards,
Dev

Hi,
   This might be the problem with url...
It should be in the below format...
http://host:port/XISOAPAdapter/MessageServlet?channel=party:sender component:sender Communicaton Channel
Regards,
Naveen

WSRM Adapter replaced with soap in PO7.4. Getting error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"

Hello All,
We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
"soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with parameters
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
and
xmbws.No SOAPIgnoreStatus = true
but not successful.
Please help me. I got stcuk here.

Hello Jannus,
The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
Please let me know the exact difference between soap and wsrm functionality in receiving end.
By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
Then i used message transform bean, but not successful.
Regards,
Ch.Venkat.

HTTP 403 Service Error, HTTP 500 Internal Server Error

My scenario is:
Rfc adapter --> XI --> WebService
I am get the following error(403,500) at the Call adapter. I like to know whether the following error occurs due to the timing out occuring as the client is not sending back a response? Any suggestions/help would be appreciated.
<SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
<Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
</SAP:TraceHeader>

from SM59 I tested the connection of INTEGRATION_DIRECTORY_HMI(HTTP connection to ABAP system)
detail:
staus HTTP response 500
status text : internal server server
duration test call 17173 ms
Please help me out to resolve this issue

Imp: Error while sending message: 500 Internal Server Error

Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
Abhishek

Hi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi.

500 Internal Server Error in FiletoFile Scenario

Similar Messages

Maybe you are looking for