500 internal server error message

I get a 500 internal server error when trying to download Lion. Any ideas? Apple's server maybe down?

I started downloading Lion and paused the installation. When I was about to restart I received a 500 error - tried turning off Macbook Pro, closing App Store to no avail. Finally called Tech. Support and was advised to check for Software Updates which she mentioned has a buffering update. Sure enough there were 2 updates & installed them and when I get to the App Store I was able to download Lion again. Hopes this helps.

Similar Messages

OmniPortlet: getting "500 Internal Server Error" message on edit

hi,
i've installed the jpdk and portalTools on oracle 9ias-rel.2 (portal 9.0.2.6). i can include omniportlets on my pages, but whenever i want to define/edit them i get the message "500 Internal Server Error" from listener (on the edit page).
what have i done wrong?
thanks,
matthias
Message was edited by:
[email protected]

Hi,
Check this [forum|Record Working Time iView Error in Portal;
Hope this helps!!
Thanks & Regards
Vijay K

500 Internal Server Error message with youtube viewing

Ok. Here's the issue. Many-but-not-every-time I'm using Safari and go to youtube to view videos I click on to view and this message comes up instead of the video: 500 Internal Server Error and then a page full of computer code.
This has just started to do this. How do I correct this problem?

I read about these reports often...
http://forums.techguy.org/multimedia/671802-youtube-500-internal-server-error.ht ml
http://www.worldlawdirect.com/forum/off-topic-messages/41075-youtube-google-serv er-down-07-14-10-500-internal-server-error.html
http://www.google.com/support/forum/p/youtube/thread?tid=5a6d067942a4e123&hl=en
Still, if you think it might be on your end, I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.

Could firefox be responsible for a Picasa 500 Internal Server Error message

For the last 5 to six days I have been unable to access my Web Albums on Picasa. I keep getting a 500-Internal server message . This sort of co-incides with my getting and morevoer using a gmail address. I am going squiffy-eyed trying to find a solution on the Picasa Forum pages. I just wonder if Mozilla can help.

500 internal server error is a server error, not a browser. If it is ac cached page please use this article[[How to clear the Firefox cache]]
A quick way to check this:
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

Get 500 Internal Server Error message when attempting to open Firefox.

Firefox working fine until last week. Cannot connect. Only receive error message. Uninstalled & re-installed. Same error message. Windows 7, Zone Alarm. Explorer 8.

Hi,
According to your description, there is a 500 internal server error when you select any Option in your OWA.
Based on my research, we can try the following steps:
1. Check whether Virtual Directories Authentication configured properly. Enable the ECP Virtual Directory with Anonymous and Basic Authentication.
2. Check on the Application Pools to view whether ECP Application Pool is running on .NET Framework v4.0. It maybe the incompletely installation of Framework that causes this error.
If so, We can try to run the following command as Administrator:
%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
Or change the MSExchangeECPAppPool from .NET Framework from v4.0 to v2.0. Then restart IIS.
If you have any question, please do not hesitate to tell me.
Hope it helps.
Thanks,
Winnie Liang

Receive "500 Internal Server Error" message

I receive the following message when trying to login to a website. I've deleted all cookies, passwords, etc associated with this site with no luck.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Error Message Received:
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
IBMHTTPServer at www26.anthem.com Port 81

HI,
It's the website, not your browser or connection.
http://pcsupport.about.com/od/findbyerrormessage/a/500servererror.htm
Try here: http://www.anthem.com/
Carolyn

Why does the message '500 internal server error' appear when I use any search engine?

I am able to type a web address and use the internet successfully but when using ANY search engine I get the '500 internal server error' message. This appears if I type in a word to search '''bold text'''and the result is the error message. I have recently uninstalled rapport and hitman pro. Please help.

Did you check your security software (firewall)?
Which security software (firewall) do you have?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
See:
* [[Server not found]]
* [[Firewalls]]

500   Internal Server Error in EP 7.0

Hello SDN Gurus,
I've a question about viewing detailed errors. I've got two NW04s Ent. Portal (Test and production).
I get detailed error (Error summary) in my test portal, but in the production server i couldn't get details, only "500   Internal Server Error" message. Support package levels and domains are same. Only difference is production server has two application servers.
I've tried with FQDN and with IP only, nothing changed. How can i fix that and see detailed error in production server.
For example in the test portal ;
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.ulker.ApproveView.RequiredControl(ApproveView.java:1073)
    at com.ulker.ApproveView.wdDoInit(ApproveView.java:984)
    at com.ulker.wdp.InternalApproveView.wdDoInit(InternalApproveView.java:561)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    ... 33 more
See full exception chain for details.
In the production portal;
500   Internal Server Error
Failed to process request. Please contact your system administrator.
Thanks in advance
Kind Regards
A.K.

Hi,
I think you are accessing the portal via one of the dialog instance and not using the Central instance.So you are not getting the error displayed in iview. If you want to activate navigate to system administration-system configuration-services and in portal runtime central configuration open the object and in portal .runtime .print cause .exception make it to true and restart the service. This may be for print but some where here in the services you can activate that.
For productive environment detailed exception is not recommended.Administrator can see the error log in
log files.
Thanks and regards,
gopal.sattiraju

SRM MDM catalog items not checking back to EBP ("500 Internal Server Error")

Hi All,
We are having an issue, ONLY with our PRODUCTION environment.
When we create a Shopping Cart and select items from an Internal catalogue, we cannot check the items back into SRM without the system throwing the "500 Internal Server Error" message. As the items never even reach SRM, there is nothing to check or display in the queues for anything even remotely helpful.
As mentioned above, the issue is only happening in our Production environment. We have tested using the production MDM webservice details in our PreProd environment and everything works flawlessly, so the issue very likely arises from our Production portal.
System info:
We have SRM 7.2; SRM MDM 3.0 and SAP Netweaver portal 7.1.
The users are using IE9 but the same happens on IE8 as well.
We have checked and all MDM applications are running.
We have done all the compatibility checks too given in https://scn.sap.com/thread/1075870 and https://scn.sap.com/thread/1836750 .
I have attached the logs.
Nothing helped so far, so we are hoping maybe either of you can.
Thanks in advance,
Niki

Hi Jason,
So in the end SAP gave a response that worked.
We actually had to delete the BYPASS_INB_HANDLER parameter and change our URL slightly. That helped and now the items check back in to EBP without issues.
The strange thing is that we still have that parameter in every other environment and yet it still works flawlessly, only causing issues in PROD. We are waiting on a response from them to ellaborate why... I am going to share when they respond.
Thank you for all the help!
Bests,
Niki

Get '500 Internal Server Error' during SIP INVITE - cause 44

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Get ‘500 Internal Server Error’ during SIP INVITE - cause 44
Have you ever seen anything like this before? It usually works, but intermittently, we see calls get rejected. It somehow seems related to high loads on the router. We reduced the occurrences by changing our code to throttle the number of SIP INVITEs we send, but this doesn’t scale well. Once it occurs, the only way to clean it up is to do a shut/no shut on the voice-port associated to SIP INVITE.
Any suggestions on how we can proceed to debug this issue?
BACKGROUND:
Cisco 2811 running (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T3, RELEASE SOFTWARE (fc2)
NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811
NAME: "9 Port FE Switch on Slot 0 SubSlot 1", DESCR: "9 Port FE Switch" PID: HWIC-D-9ESW
NAME: "WIC/VIC/HWIC 1 Power Daughter Card", DESCR: "9-Port HWIC-ESW Power Daughter Card" PID: ILPM-8
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 3", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "High Density Voice2 Network module with on board two port interface on Slot 1", DESCR: "High Density Voice2 Network module with on board two port interface " PID: NM-HDV2-2T1/E1
NAME: "2nd generation two port EM voice interface daughtercard on Slot 1 SubSlot 0", DESCR: "2nd generation two port EM voice interface daughtercard" PID: VIC2-2E/M
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 2", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 3", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 5", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
WIRESHARK:
No.     Time        Source                Destination           Protocol Info
      2 0.057246    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 2 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
      3 0.071428    10.194.154.136        171.68.115.156        SIP/SDP Status: 183 Session Progress, with session description
Frame 3 (1109 bytes on wire, 1109 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 183 Session Progress
   Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>;tag=48645D8-1175
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 8759
                Session Version: 6996
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 18710 RTP/AVP 18 101
                Media Type: audio
                Media Port: 18710
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
               MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
      4 0.089917    10.194.154.136        171.68.115.156        SIP/SDP Status: 200 OK, with session description
Frame 4 (1116 bytes on wire, 1116 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 200 OK
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>;tag=48645D8-1175
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: replaces
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 8759
                Session Version: 6996
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 18710 RTP/AVP 18 101
                Media Type: audio
                Media Port: 18710
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
              Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     7 1.661867    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 7 (469 bytes on wire, 469 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
      8 1.676056    10.194.154.136        171.68.115.156        SIP/SDP Status: 183 Session Progress, with session description
Frame 8 (1107 bytes on wire, 1107 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 183 Session Progress
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>;tag=4864C1C-10F8
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 7991
                Session Version: 6854
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 17660 RTP/AVP 18 101
                Media Type: audio
                Media Port: 17660
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     10 1.700567    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 10 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
        From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
     11 1.726376    10.194.154.136        171.68.115.156        SIP/SDP Status: 200 OK, with session description
Frame 11 (1114 bytes on wire, 1114 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 200 OK
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>;tag=4864C1C-10F8
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
              [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: replaces
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 7991
                Session Version: 6854
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 17660 RTP/AVP 18 101
                Media Type: audio
                Media Port: 17660
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     13 1.727645    10.194.154.136        171.68.115.156        SIP      Status: 500 Internal Server Error
Frame 13 (526 bytes on wire, 526 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 500 Internal Server Error
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
        From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
        To: <sip:[email protected]:5060>;tag=4864C50-3C3
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Reason: Q.850;cause=44
            Reason Protocols: Q.850
            Cause: 44(0x2c)[Requested circuit/channel not available]
        Content-Length: 0
Thanks!
-John

Since it appears you are a Cisco Employee, my recommendation is that you use the many internal resource available to you (including, but not limited to) , like TAC access, internal forums, team leaders, etc.
This not to give the casual reader, the impression that the best source of support at Cisco is a customer's public forum.

AS2 Tutorial Getting (500) Internal Server error.

When attempting to run the AS2 Tutorial for BizTalk 2006 R2 I am getting a "(500) Internal Server error" message.     Everthing looks set up OK per the following walkthrough. http://msdn.microsoft.com/en-us/library/bb743306.aspx

Hi Eric,
I am getting following error while executing Sender.exe as per the AS2 Tutorial instructions:
Unhandled Exception: System.Net.WebException: The remote server returned an error: <500> Internal Server Error.
          at System.Net.HttpWebRequest.GetResponse()
          at Ms.Test.BizTalk.Edi.As2.HttpSender.Send() in Installation Path\SDK\AS2 Tutorial\Sender\HttpSender.cs:line 249
          at Ms.Test.BizTalkEdi.As2.HttpSender.Main(String[] args) in Installation Path\Sender\HttpSender.cs:line 92
Line 249 in the .cs file is:
         HttpWebResponse hrpWebResponse = (HttpWebResponse)hrWebRequest.GetREponse();
Line 92 is:
        Stream SyncResponse = TestSender.Send();
I am doing an Asynchronous MDN send and here are the lines before line 92:
        Stream sr = new FileStream(getBizTalkInstallPath() + @SDK\AS2 Tutorial\X12_00401_864.edi", FileMode.Open, FileAccess.Read);
I have installed BizTalk Server on one machine and the SQL Server 2008 on another machine. Could this possibly be the reason for the error?
Thanks!!

Error 500 - Internal server error when trying to upload images to website

I have been unsuccessful in my many attempts to upload images to the bustalk website. I keep getting an Error 500 - Internal server error message asking me to try again later but the fault is still repeated.

I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
/Indiana University/Project Sites/Oncourse Team - FAIL
/Indiana University/Project Sites/SyllabusTest - Success
/Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
/Indiana University/Project Sites/UITS Podcast Team - FAIL
/Indiana University/Project Sites/ePortfolio Playgroun - FAIL
/Indiana University/Project Sites/Testong - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

Appstore Lion Download Getting: 500 Internal server error!!

Really Really Sad now :'( I just want to install my LION and I keep getting this 500 internal server error, doesn't matter how many times I try...

I have installed Lion on my Macbook Pro with no problems (yesterday) and am currently installing on my Macbook Air (as I write this), yet the install on my Macmini keeps getting the 500 Internal Server Error message.
This is only my guess but I think the App Store server is overloaded at the moment and will clear you (and me) for download as it's able. The error message has nothing to do with your Macs.
Patience will prevail I suspect.

The server gave an error during download: 500 Internal Server Error

Does this mean the servers are overloaded? I've installed Lion on two of my MACs. Can't get past the "The server gave an error during download: 500 Internal Server Error" message on my third system. Anyone?

It's NOT a problem with your computer - the Lion Server is being slammed with downloads and is at max capacity. (Per an Apple Rep)
You can either wait until later, or for those of you like me that don't want to wait, you can keep hitting Retry until it goes through. Just like calling a phone line that's busy - eventually you'll click Retry at the same time as someone else's download finishes and the download will start. (I only had to click Retry about 75 times )

I get 500 Internal Server Error when I try to go into Firefox. I aqm using Windows 7

I get 500 Internal Server Error when I try to log in to my Firefox Program. I am using Windows 7.
I have tried the updates, but still get the 500 Internal Server Error message.
Is there something I can do co correct this error so I can use
Firefox Again?

I have this issue and believe it is related to a MALWARE virus that has affected my laptops registry. Any suggestions?

500 internal server error message

Similar Messages

Maybe you are looking for