500 Internal Server Error - WS 2012 Essentials connector software

I get this error on the client computers after entering http://<servername>/connect into client computer browser.

Hi,
Have you tried to visit the URL you mentioned on the server side?
Also I suggest that you should try IP address instead of server name to verify the webpage you have received.
Regards,
James
James Xiong
TechNet Community Support

Similar Messages

  • Facing Problem in SLD(getting 500 INTERNAL SERVER ERROR IN PORTAL)

    Dear All,
    we had ESS application just few days back it went to Go live , very frequently we are facing the issue
    Regards JCO 's , we are getting "500 Internal Server Error" in production Portal
    After getting the error ,the " Maintained JCO's" and "Created JCO'S " are both are disabled
    uder contenten administraton->webdynpro.
    But the SDL is in active , we can able to open SLD url every thing is also fine
    Technical system and every thing coming fine
    we checked SLD User also in SLD User Administration , the SLD user is also there it is not unlocked
    The problem is : if the problem is happend after restarting the server again it is coming properly
    Again after some time it is getting same error ,whith out doing any thing also some times the problem is resolving automatically
    we are not getting Root cause of this behaviour
    In our client side SLD is centralized ,they are not maintain locally
    If the SLD is Proble , the error has to come in Quality and Production also why bcz it is centralized
    But Some times 500 ERROR IN Prodution and some times in Quality.
    And some times the Portal is very slowly opening especially ESS application ,after restart happening it is some better
    again it is getting down after some time
    If it is NETWORK Iuuse or any firewall ect...in which way we can can with them and where
    Guru's share your knowledge it's a very critical for me what are he possible ways...
    Regards,
    Giri

    Here I am giving the LOG details which is available in SLD (J2EE) server
    #2.0 #2012 03 03 14:24:57:513#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201A70000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [17]#Plain##
    SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
    #2.0 #2012 03 03 14:26:06:739#+0530#Error#com.sap.nw.lm.aci.engine.base.sld.connection.AccSldConnector#
    #BC-AC-7XX#sap.com/tc~lm~aci~engine~baselib~05#005056BB552201AB0000000100000DF0#151402750000008310#sap.com/tc~lm~aci~monitor~app#com.sap.nw.lm.aci.engine.base.sld.connection.AccSldConnector.getSldComputerSystemsForMonitoring(String)#Administrator#0#SAP J2EE Engine JTA Transaction : [9638fffffffe00fffffff85]#1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Thread[Managed_Application_Thread_29,5,Managed_Application_Thread]#Java##
    Unable to obtain Computer Systems, associated to NW Admin NWA_FOR_FirstLandScpSrvcName, from SLD. CIM_ERR_FAILED: No such instance: SAP_NWAdministrator.CreationClassName="SAP_NWAdministrator",Name="NWA_FOR_FirstLandScpSrvcName" [this message was repeated 9 times]
    [EXCEPTION]
    {0}#1#com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: No such instance: SAP_NWAdministrator.CreationClassName="SAP_NWAdministrator",Name="NWA_FOR_FirstLandScpSrvcName"
         at com.sap.sld.api.wbem.client.WBEMRequestSender.convertErrorResponse(WBEMRequestSender.java:127)
         at com.sap.sld.api.wbem.client.WBEMRequestSender.convertErrorResponse(WBEMRequestSender.java:48)
         at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:272)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.sendAndCast(WBEMRemoteClient.java:936)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.associatorNamesImpl(WBEMRemoteClient.java:507)
         at com.sap.sld.api.wbem.client.WBEMAbstractClient.associatorNames(WBEMAbstractClient.java:544)
         at com.sap.nw.lm.aci.engine.base.sld.connection.AccSldConnector.getSldComputerSystemsForMonitoring(AccSldConnector.java:3731)
         at com.sap.nw.lm.aci.monitor.fetch.util.MonitoringSldAdapter.getAllHostnames(MonitoringSldAdapter.java:277)
         at com.sap.nw.lm.aci.monitor.fetch.manager.PrefetchPackageUtil.repackageCs(PrefetchPackageUtil.java:71)
         at com.sap.nw.lm.aci.monitor.fetch.manager.PrefetchPackageUtil.repackageAll(PrefetchPackageUtil.java:58)
         at com.sap.nw.lm.aci.monitor.fetch.manager.FetchManager.repackageIfRequired(FetchManager.java:1046)
         at com.sap.nw.lm.aci.monitor.fetch.manager.FetchManager.run(FetchManager.java:435)
         at com.sap.nw.lm.aci.monitor.fetch.job.FetchJobBean.onJob(FetchJobBean.java:67)
         at com.sap.engine.services.scheduler.runtime.mdb.MDBJobDelegateImpl$2.run(MDBJobDelegateImpl.java:233)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAs(Subject.java:396)
         at com.sap.engine.services.scheduler.runtime.mdb.MDBJobDelegateImpl.onMessage(MDBJobDelegateImpl.java:267)
         at com.sap.scheduler.runtime.mdb.MDBJobImplementation.onMessage(MDBJobImplementation.java:60)
         at sun.reflect.GeneratedMethodAccessor284.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
         at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
         at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
         at $Proxy1058.onMessage(Unknown Source)
         at com.sap.jms.resourceadapter.RaServerSession.internalOnMessage(RaServerSession.java:188)
         at com.sap.jms.resourceadapter.RaServerSession.onMessage(RaServerSession.java:330)
         at com.sap.jms.client.session.JMSSession.deliverMessage(JMSSession.java:805)
         at com.sap.jms.client.session.JMSSession.run(JMSSession.java:709)
         at com.sap.jms.resourceadapter.RaServerSession.run(RaServerSession.java:379)
         at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:420)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    #2.0 #2012 03 03 14:26:57:526#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201B00000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [6]#Plain##
    SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
    #2.0 #2012 03 03 14:28:57:522#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201B70000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [5]#Plain##
    SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
    #2.0 #2012 03 03 14:30:57:519#+0530#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#005056BB552201BE0000000000000DF0#151402750000001894##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#Guest#0##1014F5C2650011E1B811005056BB5522#1014f5c2650011e1b811005056bb5522#1014f5c2650011e1b811005056bb5522#0#Application [20]#Plain##
    SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
    Edited by: giriep on Mar 3, 2012 11:38 AM

  • CF10 500 internal server errors

    I have recently installed CF10 on a Win 2008 R2 server it will open the main pages (index.cfm) but if I try to browse to the links within the site I get a 500  internal server error or 404 file not found. I have looked at a few articles in regards to creating a virtual directory named jakarta this works for only one site and seems to only work if I set that virtual directoyr to the wsconfig\1 folder. I am not familiar with CF by anymeans so if answers could be as rookie as possible.
    Thanks,

    Thank  you for your kind words A little bit which I've learned in CF in only because of all our CF users who post their queries/answers and indeed you are one of them
    Usually when you set Enable 32-bit Application pool to false, you need not to restart IIS however during maintenance window you can restart IIS
    Another thing which I want to confirm, have you added an application/applications under a website and assigned those to separate application pools?
    If yes, then please change the application's pool to the website's pool. So if, default website has 4 applications under it, then all four applications must be assigned with Default App pool (The app pool for default website).
    For testing purpose, Add a new webiste in IIS. Place a test.cfm and test.html in the web root of this website. As you mentioned that you have configured connector with All, then you need not to run the web server configuration tool. Add CFIDE and jakarta as virtual directories in this new website. Also, make sure that the ISAPI filter has a tomcat entry for this website as shown in the screenshot below. It should be there because you have configured with All so the tomcat entry should be at the server level and this new website will inherit the property from server.
    You can also enable the detailed error for this test website and share the error which browser will return if you encounter the same issue Share the results for .cfm and .html returned by the browser.
    HTH
    Thanks
    VJ

  • New Apache sites return 500 Internal Server Error for all CFML requests

    This is an ugly one.  I think it is an Apache2 - ColdFusion 9 web server connector problem.
    I have two Solaris Unix web servers.  Each of these servers have a dozen and a half Apache web sites each one connected to one of five ColdFusion instances.
    All, but TWO of them are working properly.  We created two new Apache web sites and connected them to a new ColdFusion instance.  This worked fine on one of our boxes, the development one, but not on the other, production of course.
    Whenever we try to request a cfm url from one of these sites on the production server we get a 500 Internal Server Error.  HTML pages serve up just fine, and the new instance's Administrator runs fine on its 8305 port.  So both Apache and ColdFusion seem to be working independently, but they are not talking to each other.  All the other Apache sites connected to the other four ColdFusion instances also work properly.
    This has led me to investigate the web server connectors.  They have always been tricky and problematic to set up on these boxes.  The built in tools have never worked for us on these boxes and we have always had to manually compile the connectors and configure the connections in the web sites..
    But, as far as I can tell, all the connection setups are the same between working examples and these non-working sites.
    Any insights into what else I should be checking and|or how web server connectors actually work (they have alwasy been mysterious black boxes to me) would be greatly appreciated.
    TIA
    Ian

    Some more information.
    I took a closer look at the logs (I wasn't looking
    in the Apache logs before).  I found this block for the last attempt to
    request a cfm page.
    [Tue Nov 23 15:17:17 2010] [notice] jrApache[18177: 60758]  could not
    open serverstore "/opt/jrun4/lib/wsconfig/www/jrunserver.store": No such
    file or directory[Tue Nov 23 15:17:17 2010] [notice] jrApache[18177:
    60758]  Couldn't initialize from remote server, JRun server(s) probably
    down.
    What I don't understand is why could it not open that file, it is there
    and it has the same permissions as all the other web server connectors.
    /opt/jrun4/lib/wsconfig/www
    $ ls -al
    total 166
    drwxr-xr-x   2 root     root         512 May 29 13:51 .
    drwxr-xr-x   8 root     root         512 May 29 13:51 ..
    -rw-r--r--   1 root     root          14 May 29 13:51 jrunservers.store
    -rwxr-xr-x   1 root     root       81528 May 29 13:51 mod_jrun20.so
    The following is the 'calpip' connector folder that is working just fine.
    /opt/jrun4/lib/wsconfig/calpip
    $ ls -al
    total 166
    drwxr-xr-x   2 root     root         512 May 29 13:51 .
    drwxr-xr-x   8 root     root         512 May 29 13:51 ..
    -rw-r--r--   1 root     root          14 May 29 13:51 jrunservers.store
    -rwxr-xr-x   1 root     root       81528 May 29 13:51 mod_jrun20.so

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot run PAPI in Weblogic Server 10g - Error 500--Internal Server Error

    I use Jdev 11g to create an ADF (PAPI) and deploy it to Weblogic 10g.
    The code is copied from Jdev 10g. The PAPI works fine in when running in Jdev 10g
    However, after I deploy the ADF (PAPI) created using Jdev 11g to the Weblogic server. The following error appears.
    How to modify the code? Should I add the fuego lib to the weblogic domain?
    I try to add the fuegopapi-client.jar to Weblogic Server. But it shows error: Unable to access the selected application. java.lang.NullPointerException
    BPM is running in BPM standalone. I do not use PAPI webservice
    Sincerely
    Error 500--Internal Server Error
    javax.faces.el.EvaluationException: fuego.directory.exception.DirectoryNotAvailableException: Unable to connect to the Directory Service. If the problem persists, contact your system administrator.
         at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
         at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:458)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:763)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:640)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:275)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:175)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:61)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:279)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:239)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:196)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:139)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: fuego.directory.exception.DirectoryNotAvailableException: Unable to connect to the Directory Service. If the problem persists, contact your system administrator.
         at fuego.directory.exception.DirectoryNotAvailableException.wrapDNAException(DirectoryNotAvailableException.java:33)
         at fuego.directory.jdbc.JDBCConnectionProvider.getEntry(JDBCConnectionProvider.java:81)
         at fuego.directory.jdbc.JDBCConnectionProvider.getEntry(JDBCConnectionProvider.java:34)
         at fuego.directory.provider.jdbc.JDBCPersistenceManager.getConnection(JDBCPersistenceManager.java:437)
         at fuego.directory.provider.jdbc.JDBCPersistenceManager.checkConnectivity(JDBCPersistenceManager.java:91)
         at fuego.directory.provider.DirectorySessionImpl.connect(DirectorySessionImpl.java:242)
         at fuego.directory.provider.Factory.startSession(Factory.java:405)
         at fuego.directory.Directory.startAnonymousSession(Directory.java:214)
         at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
         at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
         at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
         at fuego.papi.ProcessService.create(ProcessService.java:335)
         at hypapai2.view.backing.P1.commandButton1_action(P1.java:54)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
         at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
         ... 32 more
    Caused by: fuego.connector.ConnectorException: External resource [fuego] of type [SQL] is not initialized.
    Detail:External resource [fuego] cannot be used because it failed to initialize correctly at service startup.
    That failure generated a warning in the server log.
    Check the logs for the details on the failure.
         at fuego.connector.ConnectorException.connectorNotInitialized(ConnectorException.java:60)
         at fuego.connector.ConnectorService.getConnectorInterface(ConnectorService.java:527)
         at fuego.connector.CompositeConnectorService.getDirectoryConnectorInterface(CompositeConnectorService.java:446)
         at fuego.connector.CompositeConnectorService.getConnectorInterface(CompositeConnectorService.java:293)
         at fuego.connector.ConnectorTransaction.registerConnectorInterfaceCoordinator(ConnectorTransaction.java:656)
         at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:315)
         at fuego.directory.jdbc.JDBCConnectionProvider.getEntry(JDBCConnectionProvider.java:68)
         ... 50 more

    While still using PAPI, try also adding b1oracle.jar, b1base.jar and b1util.jar to your ADF project.
    These jars could be found from your BPM Studio installation.
    HTH

  • HTTP 500 Internal Server Error for developer sample page

    Hi All,
    Getting the HTTP 500 Internal Server Error Page when I click on Developer Sample link on http://10.4.80.238:8080/portal/dt page.
    Find the below error log for more details:
    [#|2009-07-29T10:25:36.767+0530|FINEST|SJS Portal Server|debug.com.sun.portal.desktop.context|ThreadID=19; ClassName=com.sun.portal.desktop.context.PSContainerProviderContext; MethodName=getContent; |PSDT_CSPDC0028 : PSContainerProviderContext.getContent(): getting fresh content for channel: JSPTabContainer|#]
    [#|2009-07-29T10:25:36.768+0530|FINE|SJS Portal Server|debug.com.sun.portal.desktop.context|ThreadID=19; ClassName=com.sun.portal.desktop.context.AuthlessSessionContext; MethodName=getCookieSupportMode; |PSDT_CSPDC0002 : Cookie support mode = 0|#]
    [#|2009-07-29T10:25:36.768+0530|SEVERE|SJS Portal Server|debug.com.sun.portal.desktop|ThreadID=19; ClassName=com.sun.portal.desktop.DesktopServlet; MethodName=handleException; |PSDT_CSPD0022: Internal server error null root cause is java.lang.NullPointerException|#]
    [#|2009-07-29T10:25:36.768+0530|SEVERE|SJS Portal Server|debug.com.sun.portal.desktop|ThreadID=19; ClassName=com.sun.portal.desktop.DesktopServlet; MethodName=handleException; |PSDT_CSPD0023: Primary Exception
    java.lang.ClassCastException: java.lang.NullPointerException
         at com.sun.portal.providers.error.ErrorProvider.getContent(Unknown Source)
         at com.sun.portal.desktop.DesktopServlet.handleException(Unknown Source)
         at com.sun.portal.desktop.DesktopServlet.doGetPost(Unknown Source)
         at com.sun.portal.desktop.DesktopServlet.handleNoSessionRequest(Unknown Source)
         at com.sun.portal.desktop.DesktopServlet.service(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at sun.reflect.GeneratedMethodAccessor159.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
         at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:235)
         at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2114)
    |#]
    [#|2009-07-29T10:25:36.769+0530|SEVERE|SJS Portal Server|debug.com.sun.portal.desktop|ThreadID=19; ClassName=com.sun.portal.desktop.DesktopServlet; MethodName=handleException; |PSDT_CSPD0024: Root cause
    java.lang.NullPointerException
         at com.sun.portal.providers.containers.jsp.tab.util.Tab.create(Unknown Source)
         at com.sun.portal.providers.containers.jsp.tab.util.Tab.<init>(Unknown Source)
         at com.sun.portal.providers.containers.jsp.tab.util.TabFactory.createUnmodifiable(Unknown Source)
         at com.sun.portal.providers.containers.jsp.tab.util.TabData.getAvailableTabs(Unknown Source)
         at com.sun.portal.providers.containers.jsp.tab.JSPTabContainerProvider.getSelectedTab(Unknown Source)
         at com.sun.portal.desktop.context.PSContainerProviderContext.createVisiblePortletsList(Unknown Source)
         at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(Unknown Source)
         at com.sun.portal.desktop.context.PSDesktopContext.getContent(Unknown Source)
         at com.sun.portal.desktop.DesktopServlet.doGetPost(Unknown Source)
         at com.sun.portal.desktop.DesktopServlet.handleNoSessionRequest(Unknown Source)
         at com.sun.portal.desktop.DesktopServlet.service(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at sun.reflect.GeneratedMethodAccessor159.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
         at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:235)
         at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2114)
    |#]
    [#|2009-07-29T10:25:36.770+0530|SEVERE|SJS Portal Server|debug.com.sun.portal.desktop.mfwk|ThreadID=19; ClassName=com.sun.portal.desktop.mfwk.MfwkPSServiceAdaptor; MethodName=stopTransaction; |PSDT_CSPDMF0003: Mfwk Stop transaction error: Invalid transition for this transaction|#]
    Please provide me the solution to solve it.
    Thanks in advance.

    By the wat what version of application server are you running and how is your portal deployed, i.e portal deployed on seprate machine and access manager on another?
    To disable security login into your application server console e.g https://localhost:4848
    -> Click configurations on the left to expand it
    -> click arrow on the server instance configuration to expand it (this is the instance you used to deploy portal server e.g "server" )
    -> click JVM Settings on the right you will see four tabs
    -> click JVM options, a list of values is displayed
    -> tick "-Djava.security.manager" and "-Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy" and click delete
    -> restart the server and try accessing the developer sample.
    Send me the error message if any after doing this and If this does not wok, add back the values.
    regards

  • SOAP Receiver- Error While Sending Message: 500 Internal Server Error

    Hello,
    Our scenario: IDoc to SOAP
    I have added a third party system in the SLD and have used the same in my ID configuration.
    An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
    I have tested the scenario in ID from Interface Determination and its successful.
    But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
    "Error while sending message:500 Internal server error"
    If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
    Regards,
    Abhishek

    Hello,
    Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
    http://host:port/sap/xi/engine?type=entry
    Also check your firewall settings from PI to the third-party system.
    Hope this helps,
    Mark
    Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

  • Why am I getting '500 Internal server error' after installing CF 10?

    Hello,
    I am not able to get to CF admin after installing CF 10. I am getting a '500 internal server error' along with the following message. How do I get around it? Thanks.
    Best regards,
    Chung Lee
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: java.lang.NullPointerException coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:129) coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:203) org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) java.lang.Thread.run(Thread.java:722)
    root cause
    java.lang.NullPointerException coldfusion.CfmServlet.init(CfmServlet.java:82) coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121) coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:203) org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) java.lang.Thread.run(Thread.java:722)
    note The full stack trace of the root cause is available in the Apache Tomcat/7.0.23 logs.

    Anit,
    The following is from the workers.properties:
    worker.list=cfusion
    worker.cfusion.type=ajp13
    worker.cfusion.host=xxx.xxx.xxx.xx (My work does not allow me to reveal IP address.)
    worker.cfusion.port=8012
    worker.cfusion.max_reuse_connections=250
    worker.cfusion.connection_pool_size=500
    worker.cfusion.connection_pool_timeout=60
    As for the exception log, it's showing the following:
    "Error","pool-2-thread-1","06/02/14","13:00:00",,"Unable to initialise Monitoring service: java.lang.NoClassDefFoundError: Could not initialize class coldfusion.featurerouter.FeatureRouter"
    java.lang.NoClassDefFoundError: Could not initialize class coldfusion.featurerouter.FeatureRouter
        at coldfusion.server.CFService.setupMonitoringService(CFService.java:464)
        at coldfusion.server.CFService.start(CFService.java:671)
        at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:110)
        at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:86)
        at javax.servlet.GenericServlet.init(GenericServlet.java:160)
        at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
        at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
        at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1266)
        at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1185)
        at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1080)
        at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5001)
        at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5278)
        at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
        at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1525)
        at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1515)
        at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
        at java.util.concurrent.FutureTask.run(FutureTask.java:166)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
    "Warning","Thread-10","06/02/14","13:00:00",,"Graphing service is unavailable"
    java.lang.NullPointerException
        at coldfusion.graph.GraphingServiceImpl.setUpWatermark(GraphingServiceImpl.java:220)
        at coldfusion.graph.GraphingServiceImpl._initializeGraphingEngine(GraphingServiceImpl.java:1 44)
        at coldfusion.graph.GraphingServiceImpl.access$300(GraphingServiceImpl.java:40)
        at coldfusion.graph.GraphingServiceImpl$2.run(GraphingServiceImpl.java:125)
    "Error","Thread-12","06/02/14","13:00:01",,"The Runtime service is not available. This exception is usually caused by service startup failure. Check your server configuration."
    coldfusion.server.ServiceFactory$ServiceNotAvailableException: The Runtime service is not available.
        at coldfusion.server.ServiceFactory.getRuntimeService(ServiceFactory.java:117)
        at coldfusion.document.DocumentServiceImpl.initializeDocumentService(DocumentServiceImpl.jav a:219)
        at coldfusion.document.DocumentServiceImpl.access$000(DocumentServiceImpl.java:52)
        at coldfusion.document.DocumentServiceImpl$1.run(DocumentServiceImpl.java:180)
    --Chung

  • 500 Internal Server Error   BEx Web Application

    Hello,
    can everybody help for the fault, or had the same error ?
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.
    Log ID 0014C265209B005B000007300000610A000473C4612CBCB9
    thanks

    Hi,
    I am getting similar kind of error.Can you please tell me how you resolved the issue.
    Regards,
    Priyanka

  • CANNOT ACCES EXCHANGE ADMIN CENTER (ECP) ON EXCHANGE SERVER 2013. GOT HTTP 500 INTERNAL SERVER ERROR

    HI, I just installed Exchange server 2013 Standar SP1 on a windows server 2012.  I have 3 servers one is a Domain Controller, the other one has the MBX role, and the last one the CAS role,  first i installed the MBX and after the CAS role, i passed
    prerequisite check without any issue.  However when I tried access Exchange Admin Centre (ECP) at https:\\servername\ecp
    I got HTTP 500 Internal Server Error saying  "This website cannot display the page.  Most likely causes: 1. The website is under maintenance. 2. The website has a programming error."   I tried access ECP at https://localhost/ecp and
    I got the same problem.  Under either cases I was able to see the logon page of  ECP and I was able to enter my credential (e.g. domain\user name, password).  However I got HTTP 500 Internal Server Error at the next page.
    I appreciate your help, on my case.

    Hi,
    The link that Jatin points to should be this.
    https://social.technet.microsoft.com/Forums/en-US/2f64d305-e9e2-4f48-a5b4-4f72d7bca801/exchange-2013-owaecp-http-500-internal-server-error?forum=exchangesvrclients
    Please view the Application Pool to check whether the version of .NET Framework is 4.0 and try the following command.
    %windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe –i.
    If this does not help then please check if there is any warnings or errors in Event Log and take your time to post them for my further troubleshooting.
    Thanks.

  • Web-Ticket service returns: (500) Internal Server Error

    I get Internal server errors when I try to get something from the server. This is what I get from the "Test-CSAddressBookService":
    PS C:\Users\testuser> Test-CsAddressBookService -TargetFqdn wak-lync.testdomain.com -UserCredential testdomain\testuser -UserSipAddress "sip:[email protected]" -verbose
    VERBOSE: Workflow Instance Id 42f8f454-5d02-48b2-8b8e-4ecaf6dba5e0, started.
    Connecting to web service : https://wak-lync.testdomain.com:443/WebTicket/WebTicketService.svc
    Using IWA authentication
    Successfully created connection proxy and website bindings
    Requesting new web ticket
    Sending Web-Ticket Request: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
    <s:Header>
    <Action s:mustUnderstand="1" xmlns="http://schemas.microsoft.com/ws/2005/05/addressing/none">http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue</Action>
    </s:Header>
    <s:Body>
    <RequestSecurityToken xmlns="http://docs.oasis-open.org/ws-sx/ws-trust/200512">
    <TokenType>http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.1#SAMLV1.1</TokenType>
    <RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</RequestType>
    <AppliesTo xmlns="http://schemas.xmlsoap.org/ws/2004/09/policy">
    <EndpointReference xmlns="http://www.w3.org/2005/08/addressing">
    <Address>https://wak-lync.testdomain.com/WebTicket/WebTicketService.svc</Address>
    </EndpointReference>
    </AppliesTo>
    <Entropy>
    <BinarySecret>BMLGyAK9H+6w1rrdFY+I2oSy39FMyfy86/WwJoTK0nE=</BinarySecret>
    </Entropy>
    <KeyType>http://docs.oasis-open.org/ws-sx/ws-trust/200512/SymmetricKey</KeyType>
    </RequestSecurityToken>
    </s:Body>
    </s:Envelope>
    ERROR communicating with GetWebTicket() service System.ServiceModel.ProtocolException: The content type text/html of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
    '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
    <title>500 - Internal server error.</title>
    <style type="text/css">
    <!--
    body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}
    fieldset{padding:0 15px 10px 15px;}
    h1{font-size:2.4em;margin:0;color:#FFF;}
    h2{font-size:1.7em;margin:0;color:#CC0000;}
    h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
    #header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;background-color:#555555;}
    #content{margin:0 0 0 2%;position:relative;}
    .content-container{background:#FFF;width:96%;margin-top:8px;padding:10px;position:relative;}
    -->
    </style>
    </head>
    <body>
    <div id="header"><h1>Server Error</h1></div>
    <div id="content">
    <div class="content-container"><fieldset>
    '. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
    at System.Net.HttpWebRequest.GetResponse()
    at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
    --- End of inner exception stack trace ---
    Server stack trace:
    at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding)
    at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
    at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
    at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at Microsoft.Rtc.Internal.WebTicketService.IWebTicketService.IssueToken(Message request)
    at Microsoft.Rtc.SyntheticTransactions.WebServicesHelper.GetWebTicket()
    TargetUri : https://wak-lync.testdomain.com:443/abs/handler
    TargetFqdn : wak-lync.testdomain.com
    Result : Failure
    Latency : 00:00:00
    Error : ERROR - No response received for Web-Ticket service.
    Inner Exception:The content type text/html of the response message
    does not match the content type of the binding (text/xml; charset
    =utf-8). If using a custom encoder, be sure that the IsContentType
    Supported method is implemented properly. The first 1024 bytes of
    the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 S
    trict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-88
    59-1"/>
    <title>500 - Internal server error.</title>
    <style type="text/css">
    <!--
    body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica
    , sans-serif;background:#EEEEEE;}
    fieldset{padding:0 15px 10px 15px;}
    h1{font-size:2.4em;margin:0;color:#FFF;}
    h2{font-size:1.7em;margin:0;color:#CC0000;}
    h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
    #header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family
    :"trebuchet MS", Verdana, sans-serif;color:#FFF;
    background-color:#555555;}
    #content{margin:0 0 0 2%;position:relative;}
    .content-container{background:#FFF;width:96%;margin-top:8px;paddin
    g:10px;position:relative;}
    -->
    </style>
    </head>
    <body>
    <div id="header"><h1>Server Error</h1></div>
    <div id="content">
    <div class="content-container"><fieldset>
    Inner Exception:The remote server returned an error: (500) Interna
    l Server Error.
    Diagnosis :
    VERBOSE: 'Register' activity started.
    Sending Registration request:
    Target Fqdn = wak-lync.testdomain.com
    User Sip Address = sip:[email protected]
    Registrar Port = No Port is provided..
    Auth Type 'IWA' is selected.
    Registration Request hit against sip/WAK-LYNC.testdomain.com
    'Register' activity completed in '0.3157031' secs.
    'ReadUriFromInBandProvisioningDataActivity' activity started.
    'ReadUriFromInBandProvisioningDataActivity' activity completed in '0.0002991' secs.
    'UnRegisterActivity' activity started.
    'UnRegisterActivity' activity completed in '0.0102002' secs.
    'STActivity' activity started.
    Trying to get web ticket.
    Web Service url :
    https://wak-lync.testdomain.com:443/WebTicket/WebTicketService.svc
    Using NTLM\Kerb auth.
    Could not get a web ticket
    CHECK:
    - Web service url is valid and the web services are functional
    - If using PhoneNo\PIN to authenticate, make sure they match the user uri
    - If using NTLM\Kerberos auth, make sure you provided valid credentials
    An exception 'ERROR - No response received for Web-Ticket service.' occurred
    during Workflow Microsoft.Rtc.SyntheticTransactions.Workflows.STAbsWorkflow
    execution.
    Exception Call Stack: at
    Microsoft.Rtc.SyntheticTransactions.WebServicesHelper.GetWebTicket()
    at
    Microsoft.Rtc.SyntheticTransactions.Activities.GetWebTicketActivity.InternalExe
    cute(ActivityExecutionContext executionContext)
    at
    Microsoft.Rtc.SyntheticTransactions.Activities.STActivity.Execute(ActivityExecu
    tionContext executionContext)
    at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
    ActivityExecutionContext executionContext)
    at System.Workflow.ComponentModel.CompositeActivityExecutor`1.Execute(T
    activity, ActivityExecutionContext executionContext)
    at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity
    activity, ActivityExecutionContext executionContext)
    at
    System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRunti
    me workflowCoreRuntime)
    at System.Workflow.Runtime.Scheduler.Run()
    Server stack trace:
    at
    System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(
    HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory,
    WebException responseException, ChannelBinding channelBinding)
    at
    System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelR
    equest.WaitForReply(TimeSpan timeout)
    at System.ServiceModel.Channels.RequestChannel.Request(Message message,
    TimeSpan timeout)
    at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message
    message, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean
    oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
    timeout)
    at
    System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessa
    ge methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
    message)
    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
    reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
    msgData, Int32 type)
    at
    Microsoft.Rtc.Internal.WebTicketService.IWebTicketService.IssueToken(Message
    request)
    at Microsoft.Rtc.SyntheticTransactions.WebServicesHelper.GetWebTicket()
    VERBOSE: Workflow Instance Id 42f8f454-5d02-48b2-8b8e-4ecaf6dba5e0, completed.
    VERBOSE: Workflow Execution Time (sec): 0.481
    When I look at the server I see the following in the log:
    2012-07-10 15:02:09 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\g01 10.10.20.115 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 218
    2012-07-10 15:02:09 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\g01 10.10.20.115 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 0
    2012-07-10 15:02:12 10.128.1.16 POST /WebTicket/WebTicketService.svc/cert - 443 TESTDOMAIN\e01 10.10.30.105 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 15
    2012-07-10 15:02:12 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\e01 10.10.30.105 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 0
    2012-07-10 15:02:15 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 46
    2012-07-10 15:02:15 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 202
    2012-07-10 15:02:18 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\g02 10.10.11.53 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 31
    2012-07-10 15:02:18 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\g02 10.10.11.53 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 202
    2012-07-10 15:02:18 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 46
    2012-07-10 15:02:18 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 218
    So I see it is not only a address book issue, though it is the first visible hint you get about it. I also get the Password request window for "Retrieving Response Groups" after the log in.
    I looked at similar issues, but what I found was mainly Kerberos issues, but that is not the case here, the user is able to access the folders.

    Hi,
    Try the way the following thread mentioned:
    http://social.technet.microsoft.com/Forums/en-US/ocsaddressbook/thread/83106a88-7b38-49cc-b62d-52867a99bfd1
    Regards,
    Lisa

  • [URGENT] 500 Internal Server Error  Servlet error: An exception occurred

    I have Oracle ebs 12 running on unix , and i do clone from production to Development ,
    after execute adstrtal.sh , i do check with adapcctl.sh status
    and the result is :
    Checking status of OPMN managed Oracle HTTP Server (OHS) instance ...
    /oracle/UATGG/inst/apps/UATGG_smjkt-tsfn01/ora/10.1.3/opmn/bin/opmnctl[31]: unlimited: 0403-009 The specified number is not valid for this command.
    Processes in Instance: UATGG_smjkt-tsfn01.smjkt-tsfn01.corp.sm.co.id
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    OC4JGroup:default_group | OC4J:oafm | 285084~ | Alive
    OC4JGroup:default_group | OC4J:forms | 224143~ | Alive
    OC4JGroup:default_group | OC4J:oacore | 124518~ | Alive
    HTTP_Server | HTTP_Server | 167123~ | Alive
    but when im open the url , i have face with error : "500 Internal Server Error
    Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details "
    I check the apche log and have error= "
    [Tue Apr 24 15:42:22 2012] [error] [client 172.16.101.37] [ecid: 1335300142:172.16.4.167:20841248:0:1,0] mod_oc4j: Failed to find a failover oc4j process for session request for
    destination: application://oacore (no island or jgroup).
    [Tue Apr 24 15:42:48 2012] [error] [client 172.16.101.37] [ecid: 1335300168:172.16.4.167:20841248:0:2,0] File does not exist: /oracle/UATGG/inst/apps/UATGG_smjkt-tsfn01/portal/f
    avicon.ico
    and then im do shutdown application and running autoconfig in DB tier dan APPS tier , and the result is succesfully,
    i meet with noted "R12: Resolving error mod_oc4j Failed To find A Failover OC4J Process For Session Request For Destination [ID 785296.1] " and do all step with autoconfig again , and autoconfig run sucessfully , and then im start apps and check adapcctl.sh status , running well
    but when im open URL login , i have same problem with before is "500 Internal Server Error
    Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details "
    can u help me :(

    Did AutoConfig complete successfully?
    Please see these docs.
    What is the Significance of Error Message Opmnctl[20]: Unlimited: 0403-009? [ID 555406.1]
    Unlimited: The Specified Number Is Not Valid For This Command [ID 224223.1]
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
    Thanks,
    Hussein

  • 500 internal server error - OWA when trying to open options - Exchange 2010

    Hello,
    I have been in the process of setting up our new exchange 2010 server and have found the following issue.  I can log into the secure OWA site without issue and can send and receive emails fine.  When i attempt to select any "option" such
    as set automatic replies or see all options  I receive the following error message -
    "500 internal server error there is a problem with the resource you are looking for, and cannot be displayed".
    I have verified that all required exchange servicesare running.
    I am running exchange 2010 sp3 on server 2012.
    I think it may an issue within IIS but i'm not sure
    Any help would be appreciated.
    Thanks

    Hi,
    According to your description, there is a 500 internal server error when you select any Option in your OWA.
    Based on my research, we can try the following steps:
    1.  Check whether Virtual Directories Authentication configured properly. Enable the ECP Virtual Directory with Anonymous and Basic Authentication.
    2.  Check on the Application Pools to view whether ECP Application Pool is running on .NET Framework v4.0. It maybe the incompletely installation of Framework that causes this error.
    If so, We can try to run the following command as Administrator:
    %windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
    Or change the MSExchangeECPAppPool from .NET Framework from v4.0 to v2.0. Then restart IIS.
    If you have any question, please do not hesitate to tell me.
    Hope it helps.
    Thanks,
    Winnie Liang

  • MII 14.0 SP5 - 500 Internal Server Error is returned for HTTP request - XMIIVirtual Illuminator

    Hello All,
    I appreciate your help with the issue.
    We are connecting from MII 12.1 to MII 14.0 SP5 Patch 3 on our local MII server using virtual connectors. We appreciate your help on it.
    This issue is happening for MII 14.0 SP5 Patch 3 on our local MII server
    As per the logs, accessing  http://server:port/XMIIVirtual/Illuminator gives 500 Internal Server Error
    500 Internal Server Error is returned for HTTP request [http://server:port/XMIIVirtual/Illuminator]:
      component [VirtualProxyConnector],
      web module [XMIIVirtual],
      application [sap.com/xapps~xmii~ear],
      DC name [sap.com/xapps~xmii~ear],
      CSN component[],
      problem categorization [com.sap.ASJ.web.000137],
      internal categorization [-944271956].
    [EXCEPTION]
    java.io.IOException: Stream closed.
    at java.net.PlainSocketImpl.available(PlainSocketImpl.java:483)
    at java.net.SocketInputStream.available(SocketInputStream.java:217)
    at java.io.BufferedInputStream.read(BufferedInputStream.java:325)
    at com.sap.engine.httpdsrclient.io.ServerInputStreamWrapper.read(ServerInputStreamWrapper.java:49)
    at java.io.DataInputStream.read(DataInputStream.java:83)
    at com.sap.servlet.VirtualProxyConnector.service(VirtualProxyConnector.java:110)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:103)
    at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:126)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
    at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
    at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
    at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
    at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
    Thanks,
    Kiran
    Message was edited by: Kiran Sakhardande

    Hello Julian
    This is a known problem.
    Cause
    - A user may have been added to a group in another ldap tree with a name, that is already existing.
    - When DTR retrieves the group from UME, we get 2 similar group names, but the groups may be different.
    - DTR cannot handle this and throws "Internal Server error"
    Resolution
    If you change parameter "ume.ldap.unigue_grup_attribute" to 'uid', DTR doesn't use the groupname,
    but the group-uid, therefore the group is unique.
    1. open Visual Administrator
    2. choose Services
    3. choose UME Provider
    4. Reset "ume.ldap.unigue_grup_attribute" with 'uid'
    5. restart the system
    Thanks
    Kenny.

Maybe you are looking for

  • Trying to publish a new iWeb site to mobileme

    My son is part of a family account I have and he is experimenting with creating a blog using iweb Is publisihing on Mobileme still supported? We are trying to publish but it's selling us to sign in (and we are signed in) and can't progress further I

  • Ichat Video starts to degrade after 30 secs (repeatable)

    Every time I start a video chat session with my friend, the picture is good for the first 30 to 40 secs then starts to pixelate and get blocky. Within a minute it is useless. If I cancel the chat and start a new video chat the exact same thing happen

  • Significance of release creation profile

    Hi all, Can anyone explain with example the use and significance of release creation profiles in outline aggrement Thnks Gan

  • GetClob how to?

    I tried to get the data from oracle which is CLOB, but, I got the error in this statement of my jsp: out.println(rs.getClob(1)); How to use Clob data? I just want to print it out on web page. Thx a lot~

  • Netware backupexec XP workstation

    Hi - I have been trying to enable backup of the internal drive of an XP (sp2) workstatsion to the central backup unit on our 2 server cluster. The backup software is Backupexec 9.1 and is on Server2 or the system. I have enabled the TSA software on t