500 minutes world planminutes status not avaiable online
I subscribed 500 minutes world plan last month. Verizon said I will be able to check my minutes online. However, when I go to world plan Manage page there are no minutes. I have called customer service and have spent several hours but they couldn't solve my problem. I have received an email that says that Verizon is working on my problem. Does anybody who has 500 minutes world plan experienced the same problem, if yes, how did you fix the problem?
The difference in your usage is more than likely because the international minutes you used on the start of your next billing cycle (August) were added to end of the previous billing cycle (July). Unfortunately that is the way VZ works, and it is wrong as far as I'm concerned. You should make a complaint about it. The international minutes should coincide with the billing cycle. The way VZ does it causes you to pay more for your minutes because it can cause you to go over the 500 minutes that are part of the plan.
Speaking to a representative will not help. I've tried and have gotten nowhere. This is an unpublished policy that should be stopped.
Similar Messages
-
This is ridiculous i want my money refunded immediately! The web site is a joke and it should be alot easier to contact a support team rather than having the whole world read this note through an online forum. Absolutely ridiculous! Someone better contact me back to resolve within 24 hours@
I feel the same exact way! I am absolutely livid with how much I have been charged over these past few months. How is it I was informed by my school that Adobe would only charge us $9.97. After I signed up, I dropped the course which required us to have Adobe Cloud. Now I check my bank account and I see I am continuously being charged $32.04 every month. This is abdolutely outrageous! Now I'm calling trying to cancel it and they're telling me I have to pay an extra month. This is mind blowing! Something needs to be done.
-
Macbook Pro freezes periodically, S.M.A.R.T status not apprearing in DiskUtility
My MBPro is having severe slowdown/freezes. It will take a break lasting 45 seconds to 2 minutes, usually every 3-5 minutes. It is not application specific. It can either be a browser running all by itself, or Outlook all by itself. I've fully removed Firefox and reinstalled, removed allplugins from all browsers, and nothign seems to affect it in any way.
I've cleared everything off the HD that I can, and I now have about 125GB free on the HD. I've run all of the repair and verify options available in Disk utility, Verify and Repaired both disk permissions and disk. The S.M.A.R.T. status no longer shows at all in the lower portion of the Disk Utility window. Onyx claims "SMART status not supported" for the drive (see below for model number), while the Volitans SMART utility does recognize it, and reports 5090 Power On hours, no pending bad sectors, 0 bad sectors of any type, and no errors.
I'm fully backed up using Time Machine, and all of my user files are backed up and current on BackBlaze. I'm fortunate enough to have active AppleCare on the unit, but I was hoping I could get some suggestions that would allow me to avoid traveling to the Apple Store. They're great people, just far away.
Thanks for any suggestions you might have!
Ed M.
MacBook Pro (15-inch, Mid 2012), MacBookPro9,1
1TB factory installed disk, APPLE HDD HTS541010A9E662
16GB DDR3 memory
OSX Yosemite, 10.10.1, fully updated1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Network Name not going online during Install
I have 2 servers connected to a Fibre SAN both running Server 2012 in a Failover Cluster. I have been trying to install the first of a Failover SQL 2012 Cluster. Everything installs properly until it gets to the final phase of the install and the Network
Name will not go online. I have removed and reinstalled many times with no success.
If I leave the install alone it will eventually go online however when that happens and I try to install the second node it gets to the Services part of the install and does not have one of the accounts in it. It is set as read only and I cannot change it
so I cannot continue the install.
Here is the log file I get after the initial install, I see nothing in it to point to the problem. I have tried manually creating the server in AD, in DNS etc.
Thanks!
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068774911
Start time: 2013-01-15 11:13:04
End time: 2013-01-15 11:23:19
Requested action: InstallFailoverCluster
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Cluster properties:
Machine name: ServerName
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2012
Management Tools - Basic 1033 Standard Edition
11.1.3000.0 No
SQL Server 2012
Management Tools - Complete 1033 Standard Edition 11.1.3000.0
No
Machine name: STVM5
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine Properties:
Machine name: ServerName
Machine processor count: 24
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2012
Management Tools - Basic 1033 Standard Edition
11.1.3000.0 No
SQL Server 2012
Management Tools - Complete 1033 Standard Edition 11.1.3000.0
No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: L:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: Domain\SQLClusterAgent
AGTSVCPASSWORD: *****
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\ConfigurationFile.ini
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: Cluster Disk 1
FAILOVERCLUSTERGROUP: SQL Server (SQLCLUSTER)
FAILOVERCLUSTERIPADDRESSES: IPv4;x.x.x.x;Cluster Network 1;x.x.x.x
FAILOVERCLUSTERNETWORKNAME: ClusterName
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLCLUSTER
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: O:\
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLCLUSTER
INSTANCENAME: SQLCLUSTER
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: O:\MSSQL\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: Domain\SQLClusterEngine
SQLSVCPASSWORD: *****
SQLSYSADMINACCOUNTS: Domain\user1, Domain\user2
SQLTEMPDBDIR: O:\MSSQL\TempData
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: O:\MSSQL\Data
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x86D80058
Error description: The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)'
online. Refer to the Cluster Events in the Failover Cluster Manager for more information.
Error help link:
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20130115_111217\SystemConfigurationCheck_Report.htmHere are the results:
Warnings
Cluster Configuration
Validate Resource Status
Validating cluster resource IP Address: 10.10.32.216.
This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
Validating cluster resource Name: ST-SQLCluster.
This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
Validating cluster resource SQL Server (SQLCLUSTER).
This resource does not have all the nodes of the cluster listed as Possible Owners. The clustered role that this resource is a member of will not be able to start on any node that is not listed as a Possible Owner.
This resource is configured to run in a separate monitor. By default, resources are configured to run in a shared monitor. This setting can be changed manually to keep it from affecting or being affected by other resources. It can also
be set automatically by the failover cluster. If a resource fails it will be restarted in a separate monitor to try to reduce the impact on other resources if it fails again. This value can be changed by opening the resource properties and selecting the 'Advanced
Policies' tab. There is a check-box 'run this resource in a separate Resource Monitor'.
Hyper-V Configuration
Validate Matching Processor Manufacturers
Node Processor Manufacturer Version
Server1.Domain.com AuthenticAMD AMD64 Family 16 Model 9 Stepping 1
Server2.Domain.com AuthenticAMD AMD64 Family 16 Model 4 Stepping 2
The processor version is not consistent across all the nodes. This is important because Hyper-V may not be able to live migrate a virtual machine between processors of different versions.
Network
Validate IP Configuration
Verifying that there are no node adapters with the same MAC physical address.
Found duplicate physical address D0-67-E5-F9-33-AA on node STVM4.SedonaTek.com adapter vEthernet (Inside Trunk) and node STVM4.SedonaTek.com adapter InsideTrunk - VLAN 100 - Management LAN.
System Configuration
Validate Software Update Levels
KB Article Title Support Security Bulletins
2770917 Update for Windows Server 2012 (KB2770917)
Software Updates missing on 'Server2.SedonaTek.com':
All software updates present
The servers do not all have the same software updates.
I don't believe any of the actual warnings, those not related to the SQL install, will cause a problem. -
Not avaiable on a mobile device -- is a LIE! Why do they do this?
Okay, so I'm sure everyone here has been on Youtube and tried to watch a video and came across the error "sorry this video is not avaiable on a mobile device". I even tried to use the built in Safari browser, go to Youtube, click "desktop", and then it looks and acts just like a regular computer would. This fixes the problem 50% of the time. The other 50% of the time? I still get the error "your device is not CAPABLE of playing this video". What? What do you mean not capable? Why are you lying? (the official YouTube app is terrible, don't even get me started on that, it filters/blocks SO MANY videos).
So I found a way around this, and have gotten EVERY SINGLE VIDEO TO PLAY!! Meaning those error messages saying "your mobile device isn't capable of playing this type of video" is a complete lie.
How? I decided to use a 3rd-party Youtube app. THE SAME VIDEOS PLAYED PERFECLTLY FINE!! Why? BECAUSE IT TRICKED YOUTUBE INTO THINKING I WAS ON A DESKTOP, NOT A MOBILE-DEVICE (that's why I assume it worked). Which means: your mobile phone is FULLY CAPABLE of playing any video from online or YouTube. But oh, I thought "this video wasn't compatiable with my device", huh??? Such a lying error message!!!
So my question is: WHY? Why are they blocking some videos from mobile devices? Is this YouTube doing this? If so, what do they have to gain?Josh-17 wrote:
I thought maybe somewhere here would know WHY they sometimes block mobile devices from watching videos, and put out these "error messages" when the errors messages aren't even true. Why would Google do that?
No one here speaks for Google. Why don't you post this question on THEIR support forum?
Josh-17 wrote:
And I hate to ask, since this an Apple forum, but do Android devices experience these "false errors messages" as well? I know android devices generally have many 3rd party YouTube apps, so maybe they don't get the same error messages iPhone users do?
Discussion of Adroid devices is not appropriate for this forum. You have a vaild question. Post it on the Android forums.
Josh-17 wrote:
That's not cool, Google.
Addressing Google here is foolish and a waste of time. Again, find an appropriate forum on Google to provide your feedback.
Best,
GDG -
Skype For iOS 7 Is Not Staying Online (Connected) ...
As of today, Skype does not stay online/connected and able to receive calls after being minimized for a given period of time.
PROBLEM: I have updated to the latest version of iOS 7 and have the latest version of Skype for my iPhone 4S. While I notices a few improvements I have an even bigger issue now. Skype will not stay onine/connected to the internet and standing by to take phone calls.
It does not take long after minimizing Skype that it goes into some dormant state that either iOS is putting Skype into or Skype itself is simply not working as it should and keeping itself awake. It is not immediate after minimizing Skype but I can say it does not take longer than 10 minutes.
If you have the SOLUTION please post, otherwise keep the restart and reinstall suggestions out.Registered here to confirm the same or a similar issue here too, as it seems they could be related. If I lock my phone, but allow Skype to continue running in the background, it seems to work perfectly fine for a while. My contacts see me as online, and I can still receive text and incoming call notifications.
However, if I leave it for a while, my contacts see me as offline. From what I understand, if they attempt to call me or message me while I'm appearing in this offline state, they will still be sent to my iPhone and I'll receive them as normal - however it's impossible for my contacts to be able to tell if I'm really there or not since I'm appearing offline.
I'm not sure how long it takes from locking the phone to this issue occuring, but it seems to be perhaps around an hour to two hours. I would just wake up my phone every now and then, but since my contacts are in different time zones and I may be asleep when they wish to call, I can't always simply repeatedly wake the phone up.
If I do manually switch back to the Skype app while it is in this offline state, I notice it will either refresh my contacts list when the app is opened, or it will display the "Signing In" screen briefly before returning to my contacts list - as if the app is going offline or being halted in the background, and when I manually switch back to it, it's being forced to "wake up" again.
Now, my settings already have me set to "Go Offline: Never". I've deleted and reinstalled Skype already. The phone has been reset several times. It looks like something that may need to be looked into further by the Skype team as it seems to be a potential issue - the "Go Offline: Never" preference isn't working as expected under iOS 7.
My device is an iPhone 4S (16GB) running iOS 7.0.3. It's almost always connected to WiFi and Background App Refresh is enabled (whether the last one has any relevance is beyond me, but some app devs have had issues with it so I figured it was worth mentioning in case). -
POP account will not stay online. Goes offline even after I "take account
My POP account will not stay online, even when I "take" the account "online" via the mailbox drop-down in the menu bar. I don't think the ISP or the internet connection is the problem as I have three other mailboxes with the same ISP and they all work fine.
Why might the POP account be failing to hold its online status and what can O do about it.
Thanks for your help with my problem.Hi, and a warm welcome to the Forums!
First I'd backup your whole Mail folder.
Try dragging this file to the Desktop first, then logout/in...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Can drag back if it doesn't help.
If that doesn't work try the .plists in...
/Users/YourUserName/Library/Mail/
In your home folder, try trashing this folder after quitting Mail...
/Library/Caches/Mail
http://www.hawkwings.net/2006/02/08/rebuild-your-database-and-speed-up-mailapp/
Move Envelope Index to the Desktop in...
/Library/Mail -
College student can not take online tests
Hello,
My daughter can not take online tests on her ibook because the college she is attending uses a Windows only program called secure exam for online test taking. Is there some Mac based program out there that will allow her to take her tests online while allowing her teacher to grade her exams using his PC?
Thanks for all you help in advance!Samuel,
If you do decide to use VirtualPC for the Mac, may I recommend that you look into educational pricing?
I just bought the program two weeks ago and paid $114.95 for it. (This price is for VirtualPC only and not for a bundled copy of Windows. I already had an old copy of Windows 2000 that was not installed anywhere, which I used. If you don't have a separate, unused, and fully licensed copy of Windows, you will need to buy one, and that costs additional money.)
But if you buy VirtualPC by September 30, Microsoft has a $30 rebate, which makes the product cost $74.95 for students, faculty, and staff.
The company I bought from was CCVSoftware (no space in the name), and I was pleased with their delivery and attention to the order.
I was
b NOT,
however, pleased with VirtualPC for the Mac and will be returning my copy:
1. The program seizes control of the Macintosh and does not permit even a mouse pointer outside the VirtualPC window.
2. It is slow, which I expected. I did not expect, though, that I would take me 2:50 (two minutes, fifty seconds) to load VirtualPC, Windows 2000, and then the full version of the Oxford English Dictionary. I can look up a word in my paper copy of the dictionary faster.
3. Worst of all, to me, is that you cannot switch from a VirtualPC emulation window back to Macintosh mode and then back to VirtualPC; once you are inside VirtualPC, you are stuck there until you shut down the copy of Windows you are running.
Hope this helps with your decision,
Jim Chumbley -
Can not upgrade online
I keep on encoutering an error saying me that i can not upgrade online or change my services. it keeps me asking to call verizon to make changes.
Why the error ? I recently made some chanegs to my account and the error happened after that . something looks broken.Verizon support is in receipt of this issue. We will send you a PM to gather additional information.
Thanks,
Tonya D.
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. -
My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues. -
Service Order status Not Changing From Resloved to Closed status
The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ... -
I have an ipod touch that i would like to restore to factory settings. Having said that the ipod is locked for over 1,000 minutes and i do not know the password. I know the trick of holding down the lock button and home button at the same time until the "Connect to iTunes" message pops up, but the lock button on my ipod does not work. Is there anything i could do? I really could use some help im very stuck!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Sales Doc Overall status not updating in DSO
Hi All,
In ECC status of the Sales Document has changed from B to C. However in the DSO status still shows as C. Delta has pushed through successfully. Please see the screenshot below. Why is the status not changing in DSO?
How to handle this issue?
Regards,
DTDDear Dhanuka
If the sale order item is the key field and the status is in the data field in the DSO you will not have an issue in the cube.
Please find the example below
1. DSO - Sales order X1 / 10 overall status B keyfigure 100
2. Cube - Sales order X1 / 10 overall status B keyfigure 100
After the Full DTP - Overall status will be overwritten in DSO
3. DSO - Sales order X1 / 10 overall status C keyfigure 100
4. Cube - Sales order X1 / 10 overall status B keyfigure 100
5. Cube - Sales order X1 / 10 overall status B keyfigure -100
6. Cube - Sales order X1 / 10 overall status C keyfigure 100
Regards
Gajesh -
Email/print in status "Not processed" when RFQ is published
Hello,
We are running SRM 5.0.
We have set up the event schema for BUS2200 (RFQ) to react on events: PUBLISHED, PUBLISHED_AGAIN etc. And assigned the event schema to RFQ's transaction types, eg BID.
However, when an RFQ is published, the email is not sent to vendor (whose default medium is MAI) or printed on vendor's default printer (if the medium is set to PRN). The output log under bidder/bids tab shows something like :
Status: Not processed
Medium: Print
When I clicked on the action button "Output pushbutton", the status would be changed to "Successful" and the email would be sent or the print job would be printed then.
I have checked the PPTTRIGG table and all the entries in there are of DISPATCH = 1 or 4. Not 3, which seems to indicate an "immediate processing".
My question is how I would configure the system so that the email/print when the RFQ is published could be processed immediately.
Thanks.Hello Masa,
I realized it as well. I was then a little puzzled why SRM didn't allow "immediate processing" for the "processing time" parameter in the action definition. Do you know if there is a particular reason for that?
Thanks, -
Down payments status not cleared.
Hi,
We are working with down payments by standard customizing. Everything works fine if the Down payment request has status cleared before the invoices, however If the down payment request still with status not cleared the following invoices doesnu2019t get the down payment and we can bill all the items from the milestone billing and if the down payment still not cleared it never appear in the invoices. So at the end the sales orders have sent to the client a bigger amount. That is a situation is wrong and we would like to avoid in order to avoid a lot of problems with our clients because the system doesnu2019t give any warning informing about you have send to the client the 120% of the sales order, if we have bill a down payment request for 20%. Our understanding the system always should get the down payment in the invoices or at least give a warning when you finish the billing without clear the down payments. We would like to know the right way to manage this situation.
Thank you and best regards.HI Venkat,
Sorry Venkat. It is the clarance in F-54 not the Revesal.
After clearance, the amount 29.000,00 is posted to Vendor Spl GL. So nullified this account.
Once cleared, the amount is posted to Normal Vendor ac as 34.510,00 (Doc 1700000043)
So this doc is not picked in Payment Run.
Invoice amount is 49.623,00-. So the difference 15113 (49.623,00-34.510,00) should be cleared in Payment run. It is not done.
My assumption is there is the amount difference between Normal Vendor to Speial Vendor (34,510 - 29000). Is it the cause to not picked the doc 1700000043 in payment run.
Please advise what I can do?
Thanks
Venkat
Maybe you are looking for
-
HT3737 How do i add multiple desktops on my laptop?
I can't figure out how to open more than one desktop of my macbook air.
-
FBL5N - Invoice History by Open Items at Key Date
Hi Experts. I have a doubt. Is it posible in FBL5N to get the invoice status information by " Open Items: Open at key date" ? e.g. if I change the baseline date or House Bank information in 08/25/2010 and I get the report using the date: 08/24/2010,
-
Convert String variable value to an Object referece type
Hi all, I want to know that if there any possible way to convert String variable value to a Object reference type in java. I'll explain by example if this is not clear. Let's think that there is a string variable name like, String name="HelloWorld";
-
Creation of C project from xRPM item and automatic creation of proj in PS
Hi all, My requirement is to create a cproject from xRPM, once the status of the item is "Approved" and a BAdI is there(RPM_PROJ_CUST_WF) which will trigger, when the status is changed to "Approved". My problem is how to create a cproject from xRPM i
-
Missing signed entry in resource : urgent
Hi While trying to acces my apllication on Tomcat 4.0 Servber I get this error Missing signed entry in resource: http://localhost:8080/Graf/GZ.jar exception is JNLPException[category: Download Error : Exception: null : LaunchDesc: null ] at com.sun.j