500GB StorE TV not playing some AVI files

Hoping someone can help please!
I recently purchased a StorE TV 500GB here in South Africa.
The device works perfectly on AV and HDMI, am very happy with it. Except some AVI files which I have that I can play on my PC/Laptop do not play on the StorE TV through either the HDMI or the AV connection?
I am assuming that the AVI files do not fit the specifications of the StorE? If I converted them to MP4, what are the best settings, dimensions, encoding format etc I should use? I will be using a program called Handbbrake.
Thanks in advance.

Hi, I am from SA too, and also recently bought one 500gb .
I assume you didnt read the manual, cos it says it only supports certain files and with a Max Resolution of 720 x 576 !!
I think alot of ppl only check the file name and forget about the supported resolution.
so if any avi / mp4 files have a higher resolution it wont play. so try setting Handbbrake to recode with that resolution.
I have tried this with my recode software and it then works.
( and no it doesnt play .mkv files , so you'll need to convert any of these too )
Regards

Similar Messages

Why cant i play some avi files an other avi files work ?

where can i get the codecs to watch avi files ? i can watch some avi files but not all why is that ?

There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
If you want to try "hit and miss", Perian, which rolls several codecs into one package, might work. If not, you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. Do not install both Perian and the DiVX/3iVX codecs at the same time.
If you just want to play the movie any way you can, you can also give this player a try:
http://www.videolan.org/vlc/
Regards.

Can't play some .AVI files

Hello everyone. I'm sure this problem has been posted before. I did a quick search and wasn't able to find what I needed. I'm not able to play some .AVI movies. I can't exactly figure out why I can watch some but not others. It happens with some internet .AVIs and personal .AVI videos. But as soon as I run Windows on bootcamp then I'm able to play all of those videos
I do have .AVI checked in Quicktime and I have also downloaded VLC and Perian. Anyone have the same problem as me?

I finally found the solution. The EnSharpen codec resolved the problem. All of those videos I couldn't watch with Perian, VLC, and Flip4Mac I can now watch. Here's the link to their website: http://www.techsmith.com/codecs/ensharpen/default.asp

Hi, my mac has stopped playing some avi files (that used to work). I can see the video. Does anyone know why and what i can do? My version of quicktime is 7.6.9.

Hi i have avi files saved in iphoto that i used to be able to play through quicktime. However in the last few weeks i cannot play many of these files. I can see the videos and click on them but nothing happens (i have version 7.6.9 of quicktime). Does anyone know why this has happened and what i can do about this?
Thanks.

What do you mean by what audio/video formats are involved? These are all files from several digital cameras.
As previously stated, AVI is a file container. It is somewhat old and its originator, Microsoft, dropped official support of it over a decade ago. However, it remains popular with PC users since almost any valid audio and/or video compression format can be stuffed to the file which synchronizes the content by interleaving the individual audio and video frames. The compression format is the specific manner in which the audio and video data are encoded as it is placed in the AVI container. You can find the compression format by inspecting the file in the Finder "Info" window, or in the "Inspector" window of the QT player (or other media player) if the file can be opened.
For instance, one popular compression combination would be to place DivX encoded video and MP3 audio in an AVI file container. However, neither DivX nor MP3 is natively supported by the QT player. (Although iTunes will natively support the MP3 audio.) Therefore, people who wish to play such files in the QT 7 Player would normally install either the DivX component or Perian but not both. Either installation will independently play such files in the QT Player, but if both are installed, the file will usually stop working since these two codecs can create a playback conflict.
However, the AVI container could just as easily contain DV along with DV audio. In this case, the file should play correctly in QT since this compression format is natively supported by the basic component configuration that comes in every current OS installation. Therefore, if such files suddenly stopped playing, this could be an indication that a component has been moved or deleted or that your system or QT embedded structure has become corrupted.

JMF can not play some MP3 files on the web

I try to write the application using JMF with MP3 plug-in. The application will search the word in Google dictionary
and play the MP3 sounf online.
The almost word is playing good with the MP3PLAYER, but some is always no sound.
And Itry to add ControllerListener for this, and every word got the realizeComplete and endOfMedia event.
but I just can not here the sound for some word.
for example -
http://www.google.com.tw/dictionary/sounds/actress.mp3 does not work
http://www.google.com.tw/dictionary/sounds/actual.mp3 work
This is one first java application. And I got stuck for couple days. Is anyone can give me some hint ?
Thanks !!!!!!!!!!!!!!!!!!!!

CAL297297 wrote:
But my requirement is to play the MP3 immediately when the user search the word.
Covert from MP3 to and WAV take too much time. I never said to do that as a solution, I told you to do that "to test that" the problem is that you're trying to play unsupported MP3s. Please do listen when people are trying to help you out.
Is there any other soulution except JMF ?To play mp3 files? Ummmm, yeah...go Google to your heart's content on ways to play MP3s (but you'll have to find another forum for help with that, because this forum is only for JMF)

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.
Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

(Some AVI files not working with PlayVideo.java)Java Doctors - NEEDED

Hi ,
I m working on JMF, I m not getting video output while I run some
.AVI files 1999 version and some movie clips which are .dat files
Is there any solution for this.?
I think JMF should give proper solution for all videos and audios.
Thanks for all who are working in this wonderfull API
Thanks for SUN also for their work in Java and JMF ....
BYE,
KIRAN Kumar Jakkaraju
Java Developer,
Salvation Software Services.

Thank you very much.
But AVI and .mov will take much size than .dat files.
so its better to concentrate in .dat files also for JMF I think.
Is it true.
I have a file of avi takes - 100mb for 3 min play of video
if u convert to .mov takes - 60-70mb for the same time of video.
I think you you have .dat files , for a movie of 2hours it takes only 1gb of size and can be shipped in two 500mb cds.
Please if you have any solution to reduce the avi file sizes please let me know.
Thank you,
Kiran

Quicktime X will not play some Apple Mpeg 4 Movie Files

Hi,
Having a strange issue. Quicktime X will not play some of my Apple Mpeg 4 Movie files anymore.
The files open fine in Quicktime 7, but not Quicktime X.
I receive the error message "The document could not be opened. A required Codec is not available"
I have installed other codecs (Flip4Mac as well as Perian), but no luck. Have re-installed Quicktime X (10.1) and software is all up to date (running Lion 10.7.2). The movie file works fine if I import it to iTunes as well.
Called AppleCare Support and they could not come up with an solution. Does anyone here have any ideas?
Thanks!

(BTW, I just realized this was an MPEG-4 topic - my issue wasn't necessairly centered around that architecture)
Yes, I naturally assumed that you were having problems at some point with MPEG-4 Part 2 or Part 10 content.
Since I mentioned "from," I should have mentioned what the codec/wrapper was (it was captured into a .mov file using DV/NTSC via "Capture Now" in Final Cut Pro studio V7, via an analog-to-digital converter). What makes this confusing is that files captured with the same settings sometimes open right into QuickTime X with their audio/video intact, and at other times, only the audio shows up (where upon opening that same file in QT 7, we can see both audio and video). Interestingly, the problem files icon shows up on the desktop as the generic movie icon, whereas the "normal" files' icon is the first frame of the video.
May we assume at this point that the source video data is DV-25 with 16-bit Interger (Linear PCM) audio sampled at 48.0 KHz and it is the scratch MOV file that may or may not open/play correctly in QT X but always opens correctly in QT 7?
Ultimately, though, this is an unimportant point in solving my issue. Why? Well, if I can successfully open the problem files in Compressor (e.g., see/hear the video/audio), then I can theoretically re-compress (or "re-wrap?") them to whatever codec I want - ideally one 100% compatible with QuickTime X.
I took a test file, placed it into Compressor, and applied the DV/NTSC setting to it (yes, I know, the same setting the file already had). After re-encoding (which took very little time), the file was perfectly executable in QuickTime X - both Audio and video showing as to be expected, and no real difference in quality (not that VHS source is quality to begin with).
This sounds as if the "problem" file's container may be the source of the problem. As I don't know if your Compressor test is passing the data through to a new faile container, I would make an additional test here. If your version of QT 7 is keyed for pro use, I would simply use the "Save As..." File menu option to to create a new file container. In fact, I would probably just create a "reference" file rather than another "standalone" file here—a very, very fast operation—and then open the secondary file in the QT 7 "Properties" window to ensure all of the data tracks (1 video, 2 audio, and 1 timing) are present. If all looks good, I would then try opening the reference file in QT X to see it it now plays. (I.e., whether you use a reference file here or a standalone file, the object is to see if the QT X player will now recognize all contained data tracks whether resourced by reference or physically contained in/via the new wrapper.)
Could this have been answered without knowing the complete "from" specs? Probably… which is why I posted to the help forum in the first place - the goal being some other reader may have had the same issue, and had a handy solution or suggestion, saving me the time of experimentation (what forums are great for).
I don't know about you, but I would still be looking at profile/level combination settings to see if an an assumed MPEG-4/AVC video and/or AAC audio settings had been properly encoded for QT playback.
I have no doubt that there's a technical difference between the files that created this issue in the first place. But, the solution of re-compressing with an identical codec did the trick, which for this project is good enough for me.
Recompressing data is slower than rewrapping data which is slower than rereferencing the data pointers. But, if your solution works, then that is all that matters.

JMF: How to play an avi file NOT in a Frame...is this possible?

-----Primary Task------
Using JMF, I want to play an avi video file NOT in a Frame
---------Why?----------
I want to play this avi file in a "non-decoration" container (ie. no Windows GUI, eg. Window/JWindow, Panel/JPanel)
-------Problem---------
The MediaPlayer method in JMF 2.2.1e requires a Frame container, according to JMFUtil.java (eg. mediaplayer = jmapps.util.JMFUtils.createMediaPlayer)
------Questions--------
1. Is there any way to change the method of JMFUtil.java to enable video files to play NOT in a Frame, like a Window or Panel?
2. If not, do you know of any "tricks" to get rid of the Frame decorations?
3. If not, any other solutions?

sigh... first read the API, then ask.
Frame.setUndecorated(boolean) might help. http://java.sun.com/j2se/1.4.1/docs/api/java/awt/Frame.html#setUndecorated(boolean)

HT3775 For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file. What can I do to fix this problem?

For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file.

The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0

Hello is there a solution to play some avi formats with quicktime because with all the codec i can play video but not the sound thank you by advance (im on windows 7 so perian cant help me)

hello is there a solution to play some avi formats with quicktime because with all the codec i can play video but not the sound thank you by advance (im on windows 7 so perian cant help me)

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

ITunes not playing some music videos

My iTunes (ver. 10.1) will play the audio for some music videos but not the video. They are videos that were downloaded via the iTunes Store in the past and all but 2 are doing this and they are all the same format. No, I'm not using AirTunes! And I haven't exceeded my "authorizations" limit. I'm just trying to play the videos on my laptop with regular speakers. TV Shows and short films that I have work fine, and so do some videos that I got from outside of the Store. I tried opening them in Quicktime and it does the exact same thing, audio but no video. I tried repairing permissions and nothing changed. I even went back into my Time Machine and when I did that the files wouldn't work from there either, even though I know they worked a year ago! At first, it showed the file thumbnail, but when I clicked on it the thumbnail went gray. Any ideas what the heck is going on here???

Alright! Looks like the latest update to iTunes actually fixed my problem!
I noticed in the update notes that it was supposed to address certain problems with the graphics card (Nvidia 9400 and 9600) not playing certain video files correctly. I thought it was worth a try, so after I updated I played the videos that previously were not working and voila! They work now!
For those of you who had a similar problem I would try it with the iTunes 10.1.1 (4) update and see if they work. Otherwise, I guess you've got a different problem. Good luck!

Premiere elements cannot play my avi file

I have an avi file, size 13.9 MB, which plays perfectly, when I click on it with pathfinder.
If I import it into PE, it asks me, "Fix quality problems in clips. Yes or No".
No matter what I do, there is no synchro between picture and sound, when I play it.
Anybody knows what I can do??
Best regards

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
And, some notes specific to AVI files
H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
-Insignia camera uses H.264 to either AVI or MOV... so use the MOV wrapper
Xvid/Divx are output files, not meant to be edited (variations of the MPEG4 codec, often used for Internet streaming video) so, they mostly do NOT edit well (if at all) in any flavor of Premiere, even if wrapped inside an AVI container

500GB StorE TV not playing some AVI files

Similar Messages

Maybe you are looking for