506e need to enable Video Phone

I have setup a company site using a 506e using PDM and all is going well.
Recently we hired some hearing impaired personnel and we are installing some video phones for them - Sorensen VP-200. Currently all I can get to function is outbound voice, inbound voice/video does not work.
The info I have is that this device needs to allow any IP to connection inbound on 1720 - H323 TCP
with an inclusive port range of 15328 - 15348 TCP/UDP.
I have not been able to get this device configured to enable succesful communications in both directions. I have read through the PIX admin pdf and I just cannot get this device working. I have checked this device at home and it works.
Does anyone have any suggestions?
Thank You

When an outbound packet arrives at a PIX Firewall higher security level interface (security levels can be viewed with the show nameif command), the PIX Firewall checks to see if the packet is valid based on the Adaptive Security Algorithm, and then whether or not previous packets have come from that host. If not, then the packet is for a new connection, and PIX Firewall creates a translation slot in its state table for the connection. The information that PIX Firewall stores in the translation slot includes the inside IP address and a globally unique IP address assigned by Network Address Translation (NAT), Port Address Translation (PAT), or Identity (which uses the inside address as the outside address). The PIX Firewall then changes the packet's source IP address to the globally unique address, modifies the checksum and other fields as required, and forwards the packet to the lower security level interface.

Similar Messages

What extension is needed to enable video from the Cleveland Browns web site?

What extension is needed to enable video from the Cleveland Browns web site? Video and movies play everywhere on the iMac OS 10.9.2 and my Safari 7.0.2 browser except on Cleve.Browns site. I had it working earlier but after a crash I must have made some changes and video is no longer available on that site?

Thank you for the suggestion but my Safari uses 12.0.077 Flash PLayer and the video on the Browns' site still does not respond. Works OK on FireFox but not at all on Safari.

I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable?

I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas

Try dragging the image to the desktop, then drag the image to the slide you want it on

HT1414 When I record videos, there's no sound recorded. But I tried recording a voice memo, there is a voice/sound recorded. Mobile technicians said I need to restore the phone to factory settings. HELP :) thanks!

When I record videos, there's no sound recorded. But I tried recording a voice memo, there is a voice/sound recorded. Mobile technicians said I need to restore the phone to factory settings. HELP thanks!

When I record videos, there's no sound recorded. But I tried recording a voice memo, there is a voice/sound recorded. Mobile technicians said I need to restore the phone to factory settings. HELP thanks!

HOW TO USE A VIDEO PHONE WITH MY LAPTOB THETHERING MY BLACKBERRY

Hello every one I have a curve from Verizon I use this phone as theder with my laptopworks perfectly but what I try to due is connect to my laptop a video phone from ACN wish works with internet connecting to a ether net portFor some reason my phone won’t work if I use my blackberry The phone will work if I use my wireless card just normaldos any one now what I need to due to bridge or how to connect this so I can use my video phone thru my laptop thedering with my black berry Thanksalejandro
Solved!
Go to Solution.

Sorry Godov but I cant help.
shajilal, if youre using VZWireless then you would need VZ Access Manager to tether your BB. You also have to make sure that the tethering feature is turned on (paid for).

Using Skype on internet enabled smart phone

I just set up a free Skype account to use from my home computer. Can I use this same Skype account via my internet enabled smart phone (Android operating system) or do I need a new Skype account?

Hi, Rescue11rfd, and welcome to the Community,
Of more importance is to check ahead with the cruise line to ensure they will permit the use of Skype at all! Many cruise lines impose limits on their WiFi services due to bandwidth restrictions and other issues related to their satellite uplink systems.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Connecting iChat AV with D-Link Video phone

Anyone have hints as to how to connect an iMac running OSX 10.4.10 and iChat AV 3.1.8 (v445) to a D-Link DVC 1000 set up with a TV interface?
I'm trying to connect the family Mac to my deaf sister-in-law's home video phone.
Thanks so much

Hi,
It is unlikely to work with iChat as it most likely uses different protocols.
Have a look in this list http://www.ralphjohnsuk.dsl.pipex.com/EZJim/EZJimpage7.html
iChat uses H264 and H263 as the video codec.
How it actually connects to another iChat or AIM Pc user if another set of Protocols.
Other Video conferencing apps use H323 and you may need to look at apps that can do that.
Start with looking at OphoneX
11:29 PM Sunday; November 11, 2007

Enabling Video on CME

Hi,
i went to telephony-service and enabled video: service phone videoCapability 1
The video icon did not show up on the phones until a reboot of the CME.
I beleive there should be a ways simpler and smarter!!! isn't it?
Good day

Hi Wissam,
Here is the recommended method :)
After video is enabled for the Cisco Unified CME system, you must reset all ephones to register the Cisco Unified CME video capability. Use the following procedure to reset all ephones.
SUMMARY STEPS
1. enable
2. configure terminal
3. telephony-service
4. reset all
5. end
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a8017.html#wp1054194
Hope this helps!
Rob

7985 Video Phone Logo Background Replacement

I need to place or replace select different our Company's Logo with the initial Cisco Logo to the Video Phone 7985, anyone to help me to know the Screen Size of 7985 and the corresponding Script.

Hi, I found no docs on it, however a sniffing session unveiled the secret.
Just follow the instructions for customizing the 7975 background and change the size from 320x216 to 800x600 (everywhere, size of the image, name of the directory, etc).
I also created the thumbnail image but it seems not to be used by the 7985.
Here's the 7975 instructions for reference :
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7975g/6_0/english/administration/guide/7975cst.html#wp1088046
HTH
Alberto

Simultaneous user Calls using 7985 Video Phone

I just want to know that, how many user makes call/Confernce simultaneously by using 7985 video phone.
If 7985 video phone allow multiple video calls at time then what is the procedure to enable multiple calls.

Thanks for the above information, I had the same problem, my Customers wanted to have three way (Multi point) video conference on 7985 Phones. By using MCU I should be able to establish three way (Multi Point) video conference over 7985 Phone. So this means three people (Phones) would be able to see each others.
Thanks

Tandberg 150 Video Phone

Has anyone tried connecting a Tandberg 150 video phone to a CallManager 4.0 environment?
We have configured one as an h.323 device.
We can make audio and video phones from any IP phone TO the Tandberg150.
BUT - when we try to make a call FROM the Tandberg150 to an IP phone, the Tandberg screen flashes up with Call Proceeding, and then instantly says Call Diconnected. The IP phone does nothing.
Any ideas as to what may be missing?
Thanks

The current version is L4.1 and I remember that there were a lot of issues around communicating to CallManager back when L1.0 was released.
Please refer to http://ftp.tandberg.net/pub/software/endpoints/personal_series/150/ for the software release notes.
Unfortunately, when the product was first released, the upgrade process was not as easy as it is in the current version of software. I would recommend calling the TANDBERG TAC at 866-TANDBERG or e-mail [email protected] to upgrade your system from L1.0. You will also need a release key for the upgrade.

HT4061 I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it! What can I do to save them?

I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it! What can I do to save them?

Swayzeone wrote:
I just tried updating my iPhone 4GS
No, sorry... did not happen becasue no such model exists.
If the device is in recovery mode, any data on it is already lost.
The only options are:
Restore the device to get it functional.
Enjoy the paper weight.
For what reason did you attempt to update the device without first ensuring that your data was safe, meaning backing up the device and copying important pictures/videos taken with the device to a computer?

Skype enabled home phone

Hi, I have a skype enabled home phone. I would like to use this phone for a emergency calls and for my husband to call when he can't reach me on my cell phone. Do I need an online number for this? I am not really sure how to use it. It was a gift. We have not had a home phone line to avoid having to pay a monthly bill so please let me know if there is a cost to this.
Thank you for your help!

As far as I know, Skype-compatible hardware devices tend to remain online. The only time they aren't:
1. There is a setting in that device that forces it to another state.
2. You change the state in another Skype client either manually or automatically (when idle) and that updates the online status of your account. This then toggles your online state for the hardware device as well. So if your Skype client is toggled to Away, that may be causing the issue.
I personally leave myself in online at all times. I have nothing set to change any of my states and my hardware device is always online. I generally receive all my calls.

Video phone with Qos

what is the configuration to prioritize the traffic for video phone when connecting two branch through WAN?
I read that for wan, we use ToS, what that mean? and how we can configre router 3800 series for that option?

AF41 is actually a Per Hop Behavior (PHB) which basically tells a DiffServ compliant node how to treat a packet. The decimal DSCP value for AF41 is 34. AF41 is the recommended PHB for video. Take a look at the following link for more information on PHBs. The bandwidth you reserve for video will depend on the data rate supported by your video unit. The link below gives details on capacity planning for video. You'll need to consider the data rate for your video unit, how many video units you have, and how many should be able to make simultaneous calls across the WAN. As referenced in the link, if your video units are capable of consuming more bandwidth than you have available, you will need to implement some for of Call Admission Control (CAC).
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087afb.html
http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080094968.shtml#cap_plan
Hope this helps. If so, please rate the post.
Brandon

Does any One has List of MIDP 2.0 Enabled Cell Phones

Does any One has List of MIDP 2.0 Enabled Cell Phones
and from where to Download it
i think the later part is Diff
i need especially for SAGEM,LG,PANASONIC,ALCATEL,ORANGE

Thanks SIR
for that .com but i need the SDK for Sagem,Alcatel,LG
i have got for Simens , Nokia, Moto,Sony
Thanks

506e need to enable Video Phone

Similar Messages

Maybe you are looking for