508 compliant tabbing and reading fo accessbility titles not working
I am workiing on the Mass Health Insurance Exhange system and trying to publish captivate 6 project that has 508 compliant ability with the following
tabbing through questions and click boxes so blind users can hear them being read by JAWs a screen reader. Also having objects being read by the reader with their name and description. It is not working. I put in all the proper settings in perferences and title and descriptionns in the accessibility settings and it is not outputting the accessibility descriptions for objects and being able to tab to cick boxes. So if you or anyone you know is knowledgable about publishing for 508 in Captivate 6 Please tell me of any settings I am fogetting. thank you in advance.
Hi Rick,
Yes I did enable the accessibility settings in preferences and that is why I am in a quandary about why it isn’t working.
Please keep me informed if you run across any information about other settings that I should be aware of, other than the accessibility settings in preferences.
Stephen L. Thomas
Sr. Instructional Designer / E-Learning
<mailto:[email protected]> [email protected]
Cell 339-222-0285
Website: <http://sthomasweb.com> http://sthomasweb.com
Similar Messages
-
Some of the browser tabs and headers that are "clickable" are noe working. I click on them, and nothing happens. Part of Facebook works, but the headers do not. My library site headers, which has tabs for "Search" and "Account" as examples, do not work. Up till late yesterday, there were no problems. I did re-install Firefox this morning, and it made no difference.
The Yahoo! Toolbar extension has been reported to cause this issue.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
My pinned tabs don't appear at any start and at some starts, I don't see the bookmarks toolbar (I can restore that by removing it from view-toolbars and then reselecting it). when this happens, FF also does not show any tabs and the Menu button does not work.
I have tried various suggestions found on here like deleting the sessionstore.js and re-installing FF, also tried disabling hardware acceleration in safe mode and still have the same problems.
Am reluctant to reset FF in case I lose my favourites and Bookmarks, is there anything else I can try?Firefox may not have closed properly.<br />
You can try to update to Firefox 29.0.1 to be released tomorrow (Friday) to see if that helps with this issue.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs -
I want to import bookmarks from Explorer and I go to File Tab and the IMPORT link is not working or not illuminated?
Make sure that you not run Firefox in permanent [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode" -
Missing "illustrations" tab and read-only information
After a Windows XP Home repair, no illustration tab and read-only information by new music downloads. Have most recent itunes. Can someone help me...please?
Thanks Gilad, In that case, is there then a way (via a script) that if I leave field 2 as not readonly, so the cursor moves into this field on tab out of field one, that I can reject any input from the user, if field one does not contain any data ? I thought this might be a solution. I have the script with the If Else statement, that sets the value of field 2 to "", if the value of field 1 is also "", but what is the else statement required to accept the value, if the content of field 1 is not "" ?.
The script preoduces an error, if field 1 is blank, and I try to enter data into field 2 and then tab out of field. -
Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!
Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling -
On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?
Start up in Safe Mode.
http://support.apple.com/kb/PH4373 -
Reflow in Adobe Reader for Android does not work
The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?
Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan -
The overwrite tab in the source window is not working
I'm following a tutorial and i seem to be doing everything as indicated but my "Overwrite Tab" in my source wind is not working ... any suggestions?
I am guessing you did not source patched your track.
-
IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?
PROBLEM SOLVED!
I went to my device manager on my Windows 7 PC and found the Bonjour service in my Services and Applications section. I set it to manual and BANG iTunes started working like it's supposed to.
Unfortunately, I let my IPad get stolen on 17 Jan so I'll probably wait until after April to replace it with an IPAD 2! -
When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen
Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.
-
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.
Have you attempted a restore?
-
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?
I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.
Maybe you are looking for
-
Safari hanging or won't open, can anyone help?
Having trouble w/ Safari hanging when I try to start it or if it opens it only stays open from 30secs to a little over a minute. I had the problem with both Safari 3&4, though not always with 3, it just seems to have gone left one day & haven't been
-
Will only print one page of four page document
I have an HP LaserJet M1212nf and it will only print the first page of a four page document. I tried to check the preview settings and inserted "pages 1 to 4" and print "all", but neither works. What to do?
-
How do I listen for change in the global position of a Node
Hi there, I want to create a Wire/Connection node between two scene nodes. I want this Wire node to be updated when one of the nodes is moving. In the common scenario I would listen for change events in the target nodes position and update the Wire :
-
How do I enhance the quality of a reduced jpeg (pixels are showing)?
I have a logo jpeg I need to reduce to a size that displays properly on a business card, letterhead, etc. I think I did this with another one of my Companies 4 or 5 years ago, but have not used Photoshop CS2 since and cannot seem to find guidance in
-
When I upgrade to logic studio, will Express 7 still be available to launch older projects in if I want/need to? Or will it be effectively gone from my machine altogether? Thanks