5130 Connectivity and Ubuntu

Hi,
I'm hoping somebody can help me.
I have been using a Sony Ericsson W900i with my Dell Mini-9 Netbook that runs with Ubuntu 8.04LTS, all I had to do was connect the USB cable to the netbook and handset and Ubuntu saw it as a network connection, was able to browse, send/receive email etc.
I have just "upgraded" to a Nokia 5130 and it's not working in this way.
On the Ubuntu forums I did find this:
connect Nokia to USB & select "PC Suite" mode
ubuntu@ubuntu:~$ lsusb
Bus 003 Device 008: ID 0AAA:00BB Nokia Mobile Phones
ubuntu@ubuntu:~$
--> vendor id = 0xAAA
--> device id = 0xBB
sudo /sbin/modprobe usbserial vendor=0xAAA product=0xBB
wvdialconf create
sudo gedit /etc/wvdial.conf
below adapt Baud & Init3 depending on modem & cell Internet Provider APN
you can find world APN lists on internet or ask your cell operator
Phone field maybe adapt too
[Dialer Defaults]
Modem = /dev/ttyACM0
0Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
init3 = AT+CGDCONT=1,"IP","your_APN","",0,0
ISDN = 0
Modem Type = Analog Modem
Phone = *99#
Username = find it for your APN
Password = find it for your APN
Stupid Mode = 1
then type :
sudo wvdial
ubuntu@ubuntu:~$ sudo wvdial
--> WvDial: Internet dialer version
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> local IP address bla.bla.bla.bla
So I know I can "force" a connection, but it is far from user friendly to do this everytime I want to use the Nokia. I'm looking and rolling out a lot of netbooks and mobile phones to field staff so need to find a solution at present my solution is not to use Nokia

Thanks for the reply DeepestBlue. Kinda of ironic that Nokia's tag line is "Connecting People" and yet they seem so slow to actually help people get connected, especially when they were involved in an open source project for bluetooth.
I guess I could create a script and configure sessions in Ubuntu to run it, not a really an ideal solution but thanks for the idea it's an option. My problem is that the field staff will be given the netbooks, which will be configured to run an application when the start up. The vast (95-98%) of the users are non-technical so we have tried to make the system as easy as possible to run, in fact we have removed everything from the desktop and disabled gmone-panel so that they can't accidentally click the wrong thing
I actually tested a 7310 Supernova last night and had the same problem.

Similar Messages

  • On updating version 11.4 of ubuntu I lost my web connection and cannot restore it

    I have access to the web on windows explorer, but prefer to use ubuntu. Updated to new version 11.4 and on trying to connect to internet message says cannot establish connection and to delete Work Offline mode. There is nowhere to deselect work offline and I have no menus at top of screen. Can you help ?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • BT Fon connection on Ubuntu

    I am trying to connect with BT Fon on Ubuntu 12.4. I can connect to other wireless connections listed in Network connections, and my own using my key. But the BT Fon appears to connect but my browser says serve not found.
    I have looked at endless Google pages on this question and nobody know the answer, or those who say they do have not actually tried it for themselves.
    The best I can find out is that BT Fon connection can only be established in Windows, as Windows has a piece of vital software not available to Ubuntu. I can connect to BT Fon on my Windows laptop, so this seems to be correct.
    Help would be most appreciated – even if it is to confirm that BT Fon is not possible on Ubuntu.

    Well, it is very strange because on the Ubuntu forum it says you cannot connect to BT Fon because only Windows has a special software for it which is not available on Ubuntu. Are you really sure you are connecting to BT Fon and being able to log in? The log in is the bit that counts. I seem to connect bur Firefox says it cannot find the server.
    I take it you are not using Ubuntu within Windows or in Virtual Box?

  • How to install Windows7 and Ubuntu 14.04 on a T440a

    First of all, sorry for my poor English.
    I am a new owner of a Thinkpad T440s which was delivered without an operation system. I want to install Windows 7 and Ubuntu 14.04 for dual boot.
    I am going to install windows first, followed by the installation of ubuntu. - That is the recommended way, isn't it? Which settings are necessary in bios/uefi for that purpose?
    Many thanks in advance for your help.

    Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
    And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
    The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
    Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
    (You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
    I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
    Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

  • Lenovo s12 and Ubuntu 9.10

    Any ideas? I am using the live CD and it doesn't work..

    Hello to all,
    Rather than starting a new topic I decided to hijack this for my questions about S12 ion and Ubuntu.
    I've been using Karmic Koala for a while and then I decided to try Linux Mint Helena, based on the same distro.
    There are a couple of things that I am yet to come over. These are:
    - I run XBMC in Ubuntu, connecting my Leno to an HD LCD via HDMI. Whenever I connect to my tv I have to manually switch to tv out via Leno's hw shortcut and then go to Nvidia settings to adjust the display resolution AND panning. Each time I connect to my tv I have to go thru all these because Nvidia settings won't let me save the configuration. I'd like to know how I can automate this process like in Windows when I connect the hdmi cable the output automatically switches to LCD.
    - Likewise, each time I connect to my tv I have to manually go thru audio settings and select hdmi out. I'd also like to know if there is a way to simplify this.
    - Because XBMC is not compatible with Compiz, I have to go to System>Appearance>Effects and disable Compiz each time I run XBMC. I'd also like to automate this process.
    Other than the above little problems I run into in my daily usage of the netbook, Ubuntu seems to run perfect. Though I have been following Ubuntu since v6 or smt, I can't say that I'm an experienced Linux user but I'd be willing to help as much as I can with your problems. I was lucky to have figured out some of the problems I came across like enabling the unrecognized wireless card, renaming my ntfs partitions and making them auto-mount etc.
    Best regards,
    Haluk

  • Could use help dual booting windows 8 and ubuntu 13.04

    I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
    partitions
    OS's

    I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
    partitions
    OS's

  • Phone is connecting and transfering data in the ba...

    Today at work my Nokia 6710 did start to transfer data in the background without my interaction. I was typing a sms while the symbol for data transfer below the 3G lit up. Did a quick check in the menu->settings->connectivity->Conn.mgr.  Yes, one active connection was sending and receiving data, small amounts 3-4kb, then idle.
    I ended the connection in the Conn.mgr. Closed all the apps in the phone and waited a minute. Then it started one new connection in the background again! Same procedure, checked and closed it...! This did not stop, every time the phone started a new connection after a minute? 
    I did try to find what could cause this, but no success. What is going on, any ideas for what to check? 
    I finally deleted my  3G access point in menu->settings->settings->connection->destinations->internet
    This did stopp the phone from connecting and transfering data. 
     Back home I connected to my WiFi at home, used the browser and closed the connection. Guess what, the phone did now connect via the WiFi in the background doing exactly the same type of small data transfer - without asking!? 
    What is this? I downloaded the latest F-Secure mobile version to check for virus, but nothing, it was clean.
    I did shut down the phone, will not use it until I can stop these unwanted connections and transfers. Please help.

    Finally I found the reason for these data transfers. The upgrade of the mentioned files did have something to do with all of this, but the removal of the files did not help. 
    So, I did go through all the settings in again for Connections and the setting for Share Video were set On...? Turning this setting Off did stop the background data transfers. 
    Problem solved perhaps. But I still wonder why the Share Video setting did start sending data while the phone was not in use? A bug? A virus? A hacker trying to activate the webcam?

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • What is the diff.b/w UD connect and DB Connect

    Hai,
              can any one expalin diff.b/w UD connect and DB connect...
    Regards

    Hi Lakshmi,
    please check the threads below
    UD and DB Connect
    DB connection,UD Connect Document
    Also this
    http://help.sap.com/saphelp_nw04s/helpdata/en/a6/c0e51914e842e19bda39dbbe4fe78c/frameset.htm
    hope this helps!
    Regards
    Chandru

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • How do I get my internal camera to connect and turn on?

    My internal camera is not connected and I need to know how to get my camera to turn on.  Thanks for the input.

    Welcome to  Discussions, mission hills.
    If you have not already done so, shut down Mac and then restart. Restarting may fix it.
    If not, use shldr2thewheel's good http://support.apple.com/kb/HT2090 suggestions.
    (BTW - Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your built-in camera, the same info and troubleshooting applies.)
    If your trouble persists, when you post back here also tell us whether your cam works to record with Apple apps like Photo Booth and QuickTime Player.  If not, verify the symptoms are EXACTLY the same in more than one user account.
    Be sure to test more than one Apple app in more than one user account.  Do NOT use the "Guest" account for this test.  If you do not have more than one user account for the testing, create a new one now.  If you need help, here's how to do it in your Mac OS: http://support.apple.com/kb/PH11468  (A "Standard" account is all you need for testing.)
    We await your status update
    Message was edited by: EZ Jim
    Mac OSX 10.8.2

  • Using Remote app on iPhone 5 without a separate internet connection and wifi router.

    Hi,
    I need to be able to control iTunes within my MacBook Pro remotely. Using my mobile broadband service and wireless router I've been able to get the Remote app to allow my iPhone 5 to do the job nicely through Home Share.  So I went and bought a separate WiFi router and tried to do the same thing. Of course when it didn't work, I discovered that I need an internet connection and WiFi network to make the Home Sharing work.
    So I got to thinking, can I create a WiFi hotspot using the Personal HotSpot functionality of my iPhone, set up Home Sharing on phone and MacBookPro and then use the Remote app. Ideally this would work as it seems all the key components are in place.
    The MacBook Pro accepts the iPhone hotspot as a means of Home Sharing, however the iPhone won't use the personal hotspot to Home Share and I can't connect to the iPhone personal hotspot on the iPhone itself.
    Does anyone know how to make this work for me? It would be such as neat solution if I can get it to work - not to mention the potential to save me about $200 (I need to set this model up for two people).
    Cheers
    Kathy

    Same trouble here, iPad 2 with latest OS and remote app, iPod with latest OS and app.

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • Access Connections and Tools won't install properly

    I have followed advice uninstalled the wireless driver, access connections, hotkey, power manager. . Reinstalled all ( latest versions) except access connection. Wireless connections work correctly and all hot keys function appropriately ( including Fn +F5 ). Then I let TVSU download Access connections. An icon is placed in the task tray. Clicking on it nothing happens. Also none of the hot keys work including the blue ThinkVantage key. Once I uninstall Access connection I am back in business with the wireless connection and the hot keys working. ( for all these installs I turned off the Microsoft virus scanner and the firewall).
    Have similar problem with ThinkVantage tools in that I get the Icon in the task tray and then the program freezes. No problem in reinstalling  PC doctor5
    T60 series2007 Windows XP professional pack3.

    Hi dulverton,
    I find lenovo drivers and software rather eccentric; since they need to be installed in a particular order to work properly.
    First uninstall your wireless driver and access connections, thereafter reboot your system. Then install wireless driver first, again reboot, subsequently install access connections, reboot again.
    Further this is the order in which the following drivers must be installed for each of them to function desirably:- 
    1) Lenovo PM driver
    2) Lenovo System Interface Driver
    3) Hotkey driver
    4) Wireless driver software [reboot]
    5) Access Connections [reboot]
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Cannot refresh table - test connection works fine but refresh gives "We couldn't refresh the connection. Please go to existing connections and verify they connect to the file or server." error.

    I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
    Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
    "We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
    In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
    location that are refreshing without issue. Can anyone think of what may be causing it?
    I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue. 
    Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
    Thanks

    Hi Maracles,
    Thanks for your post.
    From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
    You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
    For more information, please see:
    PowerPivot Options & Diagnostics Dialog Box:
    http://technet.microsoft.com/en-us/library/gg399091.aspx
    Using a Trace File to Troubleshoot Errors in PowerPivot:
    http://www.sqlchick.com/entries/tag/powerpivot
    Best Regards,  
    Elvis Long
    TechNet Community Support

Maybe you are looking for

  • Using Assembler to extract links from a file contained in a package

    Hi everyone, I need help creating a DDX file that would extract links from the second file in a package. Can you point me to some examples somewhere? The file has links to other files in the package. It doesn`t work when I remove it from the package,

  • Youtube resolution and premiere settings

    hi, youtube on his site state the resolution are: https://support.google.com/youtube/answer/2853702?hl=fr 240p 360p 480p 720p 1080p* new platform only Résolution 426 x 240 640 x 360 854x480 1280x720 1920x1080 but on the setting i have export to 640x4

  • Pro*C linker problems

    System is Linux Mandrake 6.0 with Oracle 8i, with the 8i patch applied. What a nightmare that install was! Lots of permission problems, unreadable directories, programs with no execute permission on them and so on. I now have a database up and runnin

  • Creating an Apple ID that cannot be changed or retrieved

    Is there a way to create an Apple ID that cannot be changed or looked up?  We're setting up some phones for students and don't want them to be able to find out their Apple IDs or change them...

  • User_command - Link ALV o/p with ME33K

    Good day Friends, I have to link my ALV o/p with ME23N OR ME53N OR ME33K according to user Selection ( Purchase Order, Purchase Requistion or Outline agreement) For ME23N & ME53N it's working successfully. For ME33K - It's linking with the o/p but no