5130 looking to have a working clock as wallpaper

I'm sort of disappointed with the font size of the existing clock compared to the huge display on my previous phone- very hard to read the clock without reading glasses.  I used my old phone in place of a watch and am now looking for a wallpaper for the 5130 that would have an active, large clock display.  I found several online, but the phone does not permit their installation.  From what I can determine, the phone only accommodates files that are .jpg or .png.  Anyone know of a way to accomplish a working clock or must I go back to wearing a watch<g>.  So far, I like the FM radio and music player and hate to give up and resort to my old phone again.  Thanks

http://store.ovi.com/content/51252?clickSource=search
http://store.ovi.com/content/47390?clickSource=search
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai and a Dodge rent car and get the same results.  I updated the last 8.0.2.

    My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results.  I updated the last 8.0.2.  It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
    Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call.  This is happening on both cars.
    Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
    My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
    Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail.  It looks like it's working ok; but when I hit Send nothing happens and the program stops responding.  Any suggestions?

    I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail.  It looks like it's working ok; but when I hit Send nothing happens and the program stops responding.  Any suggestions?

    I have starter 3.0 and cannot share pictures via outlook express. Evidently that version is discontinued and my outlook express does not support the MAPI that is required. I think the only solution is to upgrade to photoshop
    elements or to send photos as attachment to your e-mail.  I have the same problem using Zoom Browser EX sending photos via internet. I spent a whole day trying to resove this issue and have exhausted all options. Just like "Instant share" in HP image Zone that was replace by photoshop album starter 3.0 and now it is out dated.

  • ı wanna delete my purcahe but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

    ı wanna delete my purchase but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

    what?

  • I use light room on both my desktop and laptop, syncing catalog via google drive. I have been working on the desktop all week, editing a collection in lightroom. this morning i opened the program however to find only an old version of the catalog. All wor

    Hi all
    So I have lightroom on both my laptop and desktop and sync catalog through google drive.
    I have been working on the desktop all week on edits of high res scan in lightroom.
    Today i opened the program to find everything i have done for a week isn't there.
    Help.
    I feel it has synced to the last time i opened on my laptop and lost what ive on on the desktop.
    any help much appreciated.
    p

    I have no idea what happened, why you are seeing what you are seeing.
    My only guess at finding the missing work is to look under File->Open Recent on both computers.
    I do know that if you aren't making regular backups of your catalog file, and relying on synchronizing catalogs from one computer to another via the cloud, you are living very dangerously, and now you are possibly going to pay the consequences of not making regular backups.

  • How do I keep my home calendar events from showing up in my work calendar (outlook)? I have my work e-mail on my phone and need to see the work calendar but I don't want personal appointments showing up on it, like drs. appointments, soccer games etc.

    I want to keep my home and work calendars separate but be able to look at both on my phone. I don't want my personal appointments and events to show up on my work calendar, although it's fine if work events show up on my home calendar.  When I delete a personal appointment from my work calendar in Outlook, it disappears from my home calendar on my phone. I just want it to disappear from my work calendar!. FYI, I have my work and personal e-mail accounts on my phone.
    Thanks for any help/advice you can offer!
    AlinaM

    When you say "use the same purchasing apple ID for both to share books/music apps"- will this allow him to see what apps I download on his ipod (don't want)? will this allow me to continue to see what apps/games he gets on his ipod, on my phone (do want)? and do I set those changes on both devices?
    To do this:
    iPhone: Settings > iTunes & App Stores > Automatic Downloads:
         Music: ON
         Apps: ON
         Books: ON
    iPod: Settings > iTunes & App Stores > Automatic Downloads:
         now you decide what he gets automatically.
    He doesn't use game center, imessage, facetime or anything else (mainly just games, music and picture taking)- so does he really need his own apple id and email address? also- if he wants to start getting text messages, would i still have access to all of them if he has his own apple id? would i have access to them if he stays on my apple id?
    Then he doesn't need an Apple ID.
    Switch in
    Settings > Messages >
         iMessage: OFF
         Send & Receive > Apple ID: > sign out
    Settings > FaceTime > FaceTime: OFF

  • I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book format to see the multiple view, spread view, or single view.  I can no longer see my book although I still see the collection with 418 photos

    I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on.  I can no longer see my book although I still see the collection with 418 photos under collections.  What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos.  It is like the new empty template is somehow covering it up.  How do I get back to the book I have been working on?

    Is it possible you mistakenly clicked on a [Clear Layout] button?
    But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
    Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
    Note: a Book Collection shows an icon that looks like a book.
    Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
    Re-opening a book without using the "Saved Book" option can have unpredictable results.
    A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc,  is automatically updated in the Saved Book collection.

  • Just bought a new nano and it doesn't have Mickey Mouse clock.  Can I download it?

    Just bought a new nano and it doesn't have Mickey Mouse clock.  Can I download it?

    Update it in iTunes. Then you will see that you have the clock faces you are looking for.
    i

  • Looking to have my 2 y o macbook pro cleaned (dust removal and such). I live in Loughborough(Leicester), where should I take it?

    I tend to ramble when it comes to asking questions so I'll just sum it up briefly before I add any further details:
    I am looking to have my macbook pro (I believe late 2011 version-out of warranty) cleaned inside out: dust removed, keyboard cleaned all that stuff-not by me. I would like to know where should I take it for this job in either of these locations: Loughborough, London or Maidenhead, and also (if anybody knows from their experience) how much would this cost? Lastly, in Apple Stores do you get a warranty for the service they provide?
    Now for my blather...I mean extended version:
    I had my macbook pro for 2 years now and I must admit I didn't take good care of it, as I maybe should have. By this I mean I never dropped it or spilled anything on it, but I'm pretty sure it got clogged up inside with a lot of dust by now and maybe some crumbs underneath my keyboard as well, so I'm looking to have it cleaned inside out- by a professional.
    I never took it to a service before, so I really have no idea where's the best place to take it. I am not familiar with terms such as "genius bars" and after googling apple authorised services in the UK, I didn't end up with anything "certain"
    Location-wise, I am studying in Loughborough (Leicestershire), but my dad works in Maidenhead and I'll be visiting him next week. I will also be for a day in London (although it'll be a Sunday- December 21st), so any service around these locations will work for me.
    I would also like to point out one thing: I know some might suggest to clean it myself, but when it comes to anything IT-ish (especially a £900 macbook pro, I would rather leave it in the hands of a professional); even if let's say I cleaned the keyboard, I would still want to have the dust removed from the inside- and I am certainly not doing that. I'm a 19 year old university student with 0 experience and my time doesn't allow me to become an "apple genius" overnight.
    Thank you for taking the time to go through my question!

    Your MBP should be able to support 8GB (unless yours is an early 08 then you're stuck at 6GB).  I upgraded my old late 08 MB to 8GB.
    SSD are a plus if you like speed.  Having 8GB and an SSD will improve the performance of your MBP.
    I like OCZ SSD products but have heard some issues with older MBP.
    Sandisk, Crucial and Kingston SSD tends to be more reliable and less compaibility issues with older MBP.
    Hope that helps..

  • SCOM 2012 SNMP Trap - Does anyone have it working?

    I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012?  Probes work fine.
    We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices.  We currently have a case open with Microsoft, but they dont have any answers as of yet.
    Here are the cliff notes version of what we have done so far.
    Discovery - OK
    The nodes discover without issue.  I made sure they were set to SNMP only.  I did this to verify we were talking SNMP and not just ICMP.
    Open Ports/Firewall Issues
    No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from.  Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
    process.  We have tried having SNMP installed, but disabled, installed and running, and uninstalled.  Currently we have the SNMP service installed and running.  The SNMP Trap Service is NOT installed.
    Data Validation
    Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server.  I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator.  I was able
    to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
    What has been done on SCOM side
    The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor.  We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
    anything hitting that Collection Rule.  The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices.  No results.
    We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
    So has anyone succesfully received a SNMP TRAP into SCOM 2012?

    Hi,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
    In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
    Thanks,
    Yog Li
    TechNet Community Support
    How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful.  The question remains, Does anyone have it working?
    People have given troubleshooting advice, but nobody has actually answered the simple question.  Do they have it actually WORKING?

  • All of the the Windows Sidebar Apps have quit working

    With the latest update today, all of my Sidebar gagdets have quit working. When I go to reinstall, I am asked what Firefox should do with them. Why? My gadgets are a windows thing.

    I really have no idea what you are doing or what your signal routing looks like, nor do I know how experienced you are with audio software and signal routings in general. What I now think you mean is that you can't monitor your input properly, you cannot hear the signal of the mic? Is that right? Or how did you arrive to the conclusion that none of your plugins work on audio tracks? Have you actually put an audio file on your audio track?
    If you want to hear your input +processed through Logics' plugins,+ you need to enable Software Monitoring - just add its button (with a 'muted speaker' icon) to the transport by rightclicking the transport and ticking *Software Monitoring* on the list. Button grey=off, button green with dot in it=on.
    Of course the channel strip/track you receive the input on should also have an output selected, or you will never hear anything.

  • The letter keys on my MacBook have stopped working and the trackpad (or external mouse) are treating a single finger click as a double finger click

    The letter keys have stopped working on my MacBook. Number keys and punctuation keys seem to work fine. Also, the trackpad treats a single finger click as a two-finger click. I tried an external mouse and this does the same.
    If I restart, the mouse works fine but after a few minutes the issue starts. I have looked at a few forums and have checked the settings under system preferences but nothing jumps out at me :-(
    Any ideas???

    Is this one of the MacBooks with a removeable battery? If so, try removing the battery and restarting the MacBook (obviously while plugged in to an AC adapter) and test to see if you still have this issue. Other users have reported that swollen expanding batteries have caused keyboard and trackpad problems.
    If that isn't it, let us know, we'll keep helping you.
    Best of luck.

  • Apps running on wifi have stopped working on my iphone 5

    I have an iPhone 5 which is currently running on iOS 7.1.2.
    Now the problem is that since the past 4-5 days, all apps that require wifi for its connectivity (twitter, instagram, facebook, 9gag etc) have stopped working. Phone connects to the wifi at home but when i try accessing any of these apps, it tells me that I am not connected to the internet and that I need an internet connection. (the only such app working alright at the moment is Whatsapp).
    Since this morning, my phone has sorta become too slow as well, with the screen totally freezing at times.
    I can't seem to connect to the iPhone store either or update any of the apps/phone to the new version 8 of iOS.
    All the other iphone at home seem to be working fine however.
    Is there any way to fix it?

    Hi Go to Settings Reset Network Settings After Reset you need to enter your Router Wireless Key Also before you do this turn off your Router for 30 seconds When router is back on do the Reset above Also later go on Website look for your make of Router check For Firmware upgrade. Cheers Brian

  • Hp Pavillion Laptop with Windows 8 - Speakers have stopped working but headphones do! Please Help!

    Please someone help - the speakers on my laptop have stopped working all of a sudden! But the headphones do though there is a low buzzing sound when i use them.
    When in control plan to look at the problem it tells me they are working. 
    Please help - laptop is only a few months old!
    You will be my hero.
    This question was solved.
    View Solution.

    Hi,
    Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Properties.  Click the Driver tab and then click 'Update driver'.  Select 'Browse my computer for driver software' and then select 'Let me pick from a list of device drivers on my computer'.  Left click 'High Definition Audio Device' once to highlight it and then click the Next button to install it.
    Has this made any difference?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • CLD Looking for Freelance/Consulting Work

    My name is Joe Dowdle.  I am a Certified LabVIEW Developer looking for freelance and consulting work.  I currenly work full time but am available evenings and weekends to meet and work.  The best way to contact me is by email during the day:  [email protected]  I am located in central Illinois and am willing to travel on weekends/evenings as well as work remotely.
    Below is a brief summary of my education and experience.  There is more information available on my LinkedIn profile (click here).  I have spent the last year working on NI-based (hardware and software) hardware-in-the-loop (HIL) systems for ECM software testing and am continually involved with that.
    Education:
    B.S. in Electrical Engineering, Controls/Power
    Certificate in Electric Power Engineering
    B.S. in Business Administration, Accounting/Finance
    Certifications:
    Certified LabVIEW Developer
    Engineer in Training/Engineering Intern (NCEES)
    LabVIEW Coursework:
    Core 2 & 3
    Real-Time 1 & 2
    FPGA
    Connectivity
    LabVIEW Experience:
    Real-Time
    FPGA
    Veristand (custom devices, custom controls/indicators)
    If you have any work available for me please don't hesitate to contact to discuss a timeline and rates.  As mentioned earlier, email is the best way to get a hold of me during the day ([email protected]), but I will return phone calls as soon as I can (267-536-9353).
    Sincerely,
    Joseph R. Dowdle

    I'm not in NYC but I'd be happy to help.
    Dan Mode
    --> Adobe Community Expert
    *Flash Helps*
    http://www.smithmediafusion.com/blog/?cat=11
    *THE online Radio*
    http://www.tornadostream.com
    *Must Read*
    http://www.smithmediafusion.com/blog
    "ramachan" <[email protected]> wrote in
    message
    news:eid318$t58$[email protected]..
    >I do not know if this is the right place to post this but
    i am lookig for
    > freelance actionscript guys to help me with several
    projects... insteaad
    > of
    > fishing for free advice I would rather share cash and
    have a few regular
    > actionscript guys who would like to be feed regular
    work...
    >
    > I am a freelance designer who is a bit tired of
    pretending to be a
    > developer
    >
    > [email protected]
    >
    > Thank you
    >
    > sorry if this is in the wrong place
    >

Maybe you are looking for

  • How to print message in oracle rdf report output?

    Hi, There is a requirement to print message in output of oracle rdf report. srw.message prints the message in log file but how to print message in output. Please suggest. Thanks & Regards, Sunita

  • How to get the filename of document that opened my app

    Hope that makes sense. I'm relatively new to OS X programming and have built a small Cocoa app (not a document-based app). I've associated a file type (.myFileType) with my application. If I double-click a file with that file type, it opens my app au

  • How to use JNDI with JSPDYNPAGE?

    Hi Experts, Im having trouble looking up my deployed java proxy that is on WAS. When I try to lookup it through my JSPDYNPAGE portal component, it throws this error: #1.5 #00E0ED0BA5EF00710000002600000F92000453A6B0EEF782#1217875304970#System.err#sap.

  • How to view exchange rate table in essbase?

    Hi, I have created exchange rate table in Hyperion-Planning application. Now I have to view that exchange rate table in essbase. By using HSP_rate...? is it the write answer to view the exchange rate table? If I am wrong then Could you please tell me

  • 3rd party web gallery plugins?

    I've been looking around for web gallery generator that goes beyond the ones packages with Aperture. Doesn't seem like there's much out there. The references to Jumsoft go to dead links, and the one review I read for Themes for Aperture didn't look p