5130c-2 Bluetooth handsfree problem

Hi,
I've got a weird problem with my brand new Nokia 5130c-2 - I'm trying to connect a Samsung WEP Bluetooth handsfree. It works perfectly on all other phones. My Nokia sees the device, and pairs it, however without asking for the device password. Then it's reported in Active devices, and also in paired devices, but it doesn't work. The telephone has the last updates - I checked it through the PC suite.
So, anyone has suggestions?
Thank you in advance.

Hi and Welcome to the Forums!
Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

6300 and Bluetooth handsfree problem

I experience this problem with my 6300 and the BH-700 bluetooth handsfree : When the person on the other end talks my mic gets muted and he can't hear me. Ofcourse this also happens if the other end is at a noisy place and then communication is impossible since my mic is always muted.
This seems like a problem of the phone since it happens with any bt-handsfree. On the other hand the BH-700 works fine with all other phones I tried...
I upgraded my phone firmware from 4.7 to 5.0 but the problem still remains. I don't want to think that the hardware implementation of the 6300's bluetooth and simultaneously send and receive data!
Anyone this problem? Any possible solutions?
Thanks!

Hi,
I have simillar problem with BT handsfree - the other side has difficulty hearing me, while I can hear fine.
Do you have any further experience or solution?

Z3 compact bluetooth handsfree problem

Hi forum
i have a Huyndai i10 (the 2014 version) with build-in bluetooth - ever since i got the car from brand new in may, i have used my old Samsung Galaxy Wonder without any issues at all.
Today i got my Xperia Z3 compact - i paired it with the car without any problems - i can call and i can receive calls perfectly.
BUT - the syncronization of contacts and call history fails every time. It says 'Downloading' for some minutes and the give an error message.
Please can someone help - i really miss my full handsfree functionality!!
Best regards
Henrik
Denmark
Solved!
Go to Solution.

Hi MotomanDK,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
With the information supplied, I can suggest that you first try performing a reset to the in car kit and also remove the Bluetooth connection from the device.
Once done try using the service. The issue you may have here is that not all Bluetooth devices are going to be able to work with the in car system, this is due to a number factors related mostly to Bluetooth profiles.
I hope this helps.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

9500 bluetooth handsfree problem since update

Updated my 9500 last evening. Today I have been unable to get my vehicle handsfree device to operate correctly.
When the phone and device are connected the handsfree unit sounds its incoming call tone constantly. When attempting to receive an actual incoming call (push the receive button) nothing happens except the constant ring tone.
Seriously considering rolling back the OS unless anyone has an answer. HELP!

A fix for this is by using a hybrid OS. It gives you a great OS for the 9530. Go to bbhybrids.ne and look for the .419/436 hybrid. I takes care of the voice dial with or without Bluetooth. It utilizes the .419 MTS Mobility .419 OS and the .436 hybridization from the folks at bbhybrids. Going hybrid is easy to do.
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

BlueTooth Handsfree problems

I've got two Motorola speaker phones. An older one and a brand new T305. I've had problems with both where the iPhone shows it's connected to the hands free and the audio is selected to use the hands free, but there's no audio and if I switch the audio to iPhone the caller is there.
Seems worse with outgoing calls. Incoming seems to fade the audio and lets me answer with the hands free. The problem only seems to happen when I have a cassette adapter attached to listen to the ipod on my car stereo.
Anyone had the problem and gotten it figured out?

My Iphone has update 1.1.2 and I am having similar issues with my HF850. It works on an intermittent basis and seems to attempt to reconnect to the Iphone constantly. I have found some documentation on the web confirming compatibility issues. For now, I am hoping that Apple will address the problem in future updates.

Bluetooth HandsFree Yes - Stereo Bluetooth NO !

Hey All,
Does anyone know how to disable the stereo bluetooth but keep the bluetooth handsfree swithched on.
I'm having a problem with my cars handsfree setup. If listening to the iPod through the headunit(Kenwood DNX6140) using the cable, and a call comes through, it continues to play the music over the voice call via bluetooth. I have also tried streaming the iPod via bluetooth...this works great but again the music does not stop when a call in in progress unless you actually press stop.
Can anyone confirm that when using stereo bluetooth headphones that the music stops when a call comes through.
Would love some help on this one.
Cheers,
David

Okay, does anyone know if you can disable A2DP Bluetooth with iPhone 3.1 update ?

IOS 4.3 Bluetooth Headset Problem

Does anyone have this similar problem?
My bluetooth headset (handsfree) disconnects intermittently every few minutes (and auto reconnects in 10 to 20 secs). The "Personal Hotspot" option was disabled as I thought it was interferring with the bluetooh connection.
But after some trial and error, I disabled the Wi-Fi option, and it solved the bluetooth disconnection problem.
Prior to IOS 4.2, I have never encountered this problem. Does anyone know how I can downgrade back to IOS4.2?

After upgrading to iOS 4.3, within a few days later my Jabra WAVE encountered problems with its Bluetooth connectivity. I had no problems pairing with both my iPhone4 and my MacBook (aluminium uni-body model). Unfortunately, I can't control my Jabra WAVE's volume control any more which was clearly shown on my iPhone4. Worse of all, I can hear the caller's voice but not vice versa.
I thought my Jabra WAVE was faulty, and I tested it on Skype via my MacBook. To my surprise it worked flawlessly. I've a hunch that iOS 4.3 is still very buggy, and Apple iOS engineers haven't rectified lots of these bugs since the last version.
This is a terrible pain for everyone who's upgraded to iOS 4.3. Bummer

AshTray and Bluetooth install problems

Was trying to install some old games on my ideapad S10e and somehow resorted to using AshTray custom resolution app (used with eeepc to help run certain games).. well to cut a long story short.. Dont use this app i was able to play a game (diablo2) but it changed all the default resolutions. In the end there was no way i could go back to the native resolution so i had to opt for first time pressing the F11 Recovery button.. took a little while but it did complete the process with fresh factory settings and rez back to normal. Then after that i check my device manager and it said that the bluetooth device wasnt installed. Strange cos everthing else was installed ok. I downloaded the bluetooth drivers for my S10e and clicked install.. it looked like it installed but for the life of me i still couldnt figure out why bluetooth was still yellow in device manager. Well just as i started writing this i figured it out if anyone else comes upon this problem (noob trap). Basically the BT drivers are "extracted" to C:\DRIVERS\WIN\BTW\54bl03ww and you need to run the setup.exe then it installs properly. I know im a noob but i would of thought it installed automatically like all the other device drivers. Quite impressed by the recovery mode appart from the BT hiccup it worked as good as i would expect.
oh well Panic over S10e is back to normal

Now the email began to work again:mansurprised:
Still having problems with bluetooth handsfree device: E 75 doesnt even ask passwords when I try to connect bluetooth handsfree and cant establish connection with voice devices. Bluetooth still works fine with my laptop or other phones! Does anyone have solutions?

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

Mac Mini Bluetooth hardware problems ?

I own a Mac Mini Intel Core 2 Duo 1Gb bought last October, an Apple wireless keyboard and an Apple wireless mouse, both I formerly use without any problems with my old Powerbook G4. By now, I used them with my Mac Mini it worked perfectly fine. But since two or three weeks, I’ve got big Bluetooth connection problem. Randomly, after one or two hours of use, both keyboard and mouse loose connection and the Bluetooth symbol change itself into a strange one. I had a look on your site to learn the meaning of it and the symbol is see which is a Bluetooth symbol with a horizontal zebra means that no Bluetooth hardware can be found! Does my Mac Mini built-in Bluetooth card have problems?
Since I haven’t got any wired USB keyboard or mouse I have to reboot my Mac Mini quite roughly. Sometimes one reboot is enough to make the Bluetooth of Mac Mini to work again, sometimes not and I have to wait a little bit more (more than ten minutes). I can see it works again as the Bluetooth symbol is the right one again (the one with the dots).
It is very annoying. And I am a bit sad to have such problems with Apple stuff. Is there something I could do to avoid such a waste of time? Or shall I call Apple Care for fear it should be a hardware problem.
Of course, I use brand new batteries for both of them.
Message was edited by: Christophe Canus

***
My mini is doing it as well. Just started doing 2-3 weeks ago. Logitech Denovo or Apple Bluetooth. Doesn't matter which. Loses it in about an hour or so. Al Keyboards and mice were purchased at about the same time as the core 2 duo mini, ~ last October.
Must power cycle the machine to get it back and it must be paired again. Very annoying. Can't remember if it coincides with an Apple update.
This mini has had the superdrive replaced twice, once within 6 weeks of purchase. Ever since Leopard, it's been close to the best media head. now this...
Sigh.
(What makes it not the best? Frontrow doesn't sort titles correctly [1, 10, 2, 3 - wrong!], doesn't force mount aliases in the movies directory, doesn't put out 1080p without hacking. And I'd so love eyeTV integration with Frontrow. It'd be perfect then.)

Any Bluetooth audio problems since upgrading to ICS?

Hi.
Was wondering if anyone has had any Bluetooth audio problems since upgrading to ICS? In particular, have you had any stuttering and/or pauses in streaming since the upgrade?
I use a MW600 with my phone and I get stuttering and pauses every few minutes between the phone and the MW600 which is very annoying - to the point where I can't reliably use the phone for audio any more.
Thanks
Savcom

Sorry but it seems to be a problem some users are experiencing. It's already been reported so hopefully there will be a fix for this soon.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Z10 connected to car via Bluetooth handsfree link not providing song information after 10.2.1 update.

I've been using a Z10 for about 6 months and I connect the phone to my car (a 2012 Honda Civic) via the Bluetooth handsfree link to receive phone calls and to play songs that are stored on my phone's SD card. When I play a song, the song title, album and artist information is displayed on my car's LCD screen. However, after updating to 10.2.1 this morning, the song information doesn't seem to be sent to the car. No matter what song I play, the car screen says "none" for the title, album and artist. I can still "scroll" though my songs from the car's stereo console using the forward and backward buttons, but alas, no song information is shown. I've rebooted my phone several times, deleted the Bluetooth connections on my phone and in the car and then reconnected, but no dice. I must admit that I'm really annoyed about this. This is pretty basic stuff. Does anyone else have a similar experience?
Solved!
Go to Solution.

Hmmm...very strange. In the worst of the worst cases, the reload process I used was:
Fully document configuration
On Device WIPE
AutoLoader Reload
On Device WIPE
Reload all configurations (not a restore from backup)
Reload all media from PC
Launch media app and wait for it to full scan for media
Pair with vehicle and see it it now works
Tedious I know, but sometimes required especially with emerging technologies.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Simultaneous E71 Bluetooth handsfree and Headphon...

I have Bluetooth handsfree (factory) built into my Car Audio that is non-A2DP. So to listen to Audio on the E71 I need to connect through Headphone to the Car Stereo system. When I do this , Bluetooth Handsfree malfunctions. The Audio (that Im listening to ) is silenced when there is an Incoming call that I answer, but the E71 seems to cut-off ALL audio through its bluetooth as well (I hear silence plus the other end is unable to hear anything I say).
Ideally, I would like to have the listen to my music through the Wired Headphone link, but would like to take the incoming call through bluetooth handsfree. Any way to make both these work together?
Please help if any of you have a fix for this.
dram12

I doubt if this is possible because there is interlock mechanism (hardware/software) that once the phone senses a head phone is plug into its socket be it from other source, the speaker(mike too) as well as blue tooth profile for head phone are disable. A2DP in blue tooth means it could transmit/receive in stereo.Have you tried to go the web site of that car kit, it could only be an upgrade of its firmware will solve the conectivity issue your facing. Blue tooth connection only without using a separate cable to the stereo system.
Message Edited by android on 03-Feb-2009 01:18 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

BH 600 Bluetooth Handsfree

I bought a BH 600 Bluetooth Handsfree a week ago. It was working fine. Just today, it suddenly disconnected. Following all the steps again, i press and hold the (call) button on the handsfree till the light becomes steady on. Search for paired devices on the phone, it shows the model BH-600, connects, asks for Passcode, acknowledges it on entering, and i set it as authorised. But when i select the newly added BH600, and select "Connect" it says Bluetooth connection failed. The device is responding fine, even clicks on the device sound alright, but it fails to connect. Please Help. Also, i'd like to know how to see wether the device is Original or a fake?

I've found out how the pairing can be done. When the headset is paired with a phone, it will not pair with another phone or device again. The way to get it to work is as
1. Switch on the headset by pressing the button and hold it until the green LED is stable.
2. Connect the new device by pairing it.
3. The headset is connected to the new device.

Having bluetooth connection problem after using Yosemite for a week

After installing and using Yosemite for a week, I experienced bluetooth connection problems with my magic mouse and headphone, my model is macbook pro retina early 2013, hope to fix this soon

Hello there Oranger84,
If I understand correctly you are having some sort of Bluetooth issue between your computer and Magic Mouse and Headphones after installing Yosemite. Depending on the particular symptoms you are seeing, I would recommend the following article to help you get that resolved:
Troubleshooting wireless mouse and keyboard issues
Thank you for using Apple Support Communities.
All the best,
Sterling

5130c-2 Bluetooth handsfree problem

Similar Messages

Maybe you are looking for