5140i - c42 cable - not connecting

Have checked similar threads on this topic and no answer to my problem. Have checked that keyboard lock is not automatically on and set Com port to 30 as recommended in one of the threads.
Running XP Pro, latest service pack.
Latest edition of PC suite downloaded and installed - not drivers on CD that came with the Nokia cable since PC suite has drivers.
When phone is connected 2 error messages appear in quick succession - Data enhancement connected - Enhancement not supported.
Driver disc that came with cable has instructions for setting up modem - have tried to follow instructions but some bear little resemblance to what i see on my machine

Sounds like either a faulty cable or a faulty phone. It should not say "enhancement not supported"... if it does, you've got a problem.
I'd suggest taking your phone and cable to your nearest Nokia engineer to have them both tested.
If you're in the UK, find your nearest engineer here

Similar Messages

HT201444 Getting error message 4005 so re-installed latest version of itunes, restarted computer, everythingis up to date. Still getting erro 4005. This happened when I went to update software. Face of ipad showing a cable not connecting to itunes

How can i restore my ipad to factory settings?
Getting error message 4005 so re-installed latest version of itunes, restarted computer, everythingis up to date. Still getting error 4005. This happened when I went to update software. Face of ipad showing a cable not connecting to itunes

Usually a USB error. Read here:
http://support.apple.com/kb/ts3694#4016
To restore ipad: Settings > General >(Scroll down) >Reset > Erase All Content & Settings
Cheers,
Alec

Ethernet: "Cable Not Connected" and Parallels?

Hi, everybody!
So, we've got a Late '06 iMac and we run Parallels to use Windows XP, since my wife's work stuff is not Mac-friendly. Our Ethernet port has not been waking from sleep properly for quite some time. The Network Pane just shows "Cable Not Connected." At first I thought it was my old router, but it's still happening with a three-month-old Time Capsule.
I took it to my local Genius Bar, and was told that this is a "known issue" with Parallels Desktop and Leopard. I uninstalled Parallels for the weekend and deleted its network devices from the pref. pane. The ethernet port worked for a couple of days, but then it was gone again last night.
Has anyone else run into this? Or heard about this "known issue?" I've not been able to find any information about it.
Thanks!
Jon

I'm seeing the same issue with Nov 2007 iMac. Parallels has never been installed on the machine. Has any progress been made in identifying a solution?

"Ethernet Cable Not Connected" Huh?

I have a dual 10.3 450 G4 that I rarely connect to the internet. I kept getting the wrong date and time so I changed the battery. Now the monitor display keeps resetting to the wrong size and I keep getting the message the "Ethernet Cable not connected even though if I connect the cable to my laptop it works fine. I even tried restarting in OS 9, I repaired permissions still nothing. The system profiler tells me that the the extension is not loading. I can't find where to dump the preferences.
Any help?
Thanks
Enio

Hi,
Try re-setting the PRAM.
http://docs.info.apple.com/article.html?artnum=2238
or, PMU Reset
http://docs.info.apple.com/article.html?artnum=95037
Regards,
Dave

Radeon HD 2900XT/Pro Cable NOT Connected ?????

my graphic card Radeon HD 2900XT/Pro finally arrived(used one), i have properly installed it but when i press the power i get the usual message Cable Not Connected, while it is connected. i had a look at bottom part of my mobo p45 diamond i see blue and red lights???. this graphic card has ddr3 and 512 bits bus interface do i have to get into bios and play around and get the setting right or you think this is faulty units
i removed the graphic card and used my other graphic card MSI HD 2400 using the same VGA monitor everything is ok and i see all green lights.
any input will be much appreciated

you got it, i had not connected all of power, it is ok cheers

Ethernet Cable "Not Connected" for W510

I recently reloaded my OS, and now my wired network card does not work. The driver manager say the card is working fine. But whenever I connect the network cable, there are no LED's light up on the card, and ipconfig says the cable is not connected.
I know it is not the cable or router, since I pulled the cable from a working T520.
Thoughts? Did I do something wrong on the OS install, or is it hardware?
Thanks
Al

Ok. It was worth a shot.
How about trying a Linux Live CD boot? Even though Windows is reporting the card as ok, if it doesn't work in Linux, then the report is suspect and you may, in fact, have a hardware issue.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Usb cable not connecting ipod touch and iTunes

when i connect my ipod touch using usb cable with mac..itunes is not detecting it..even itouch is not charging..what should i do?

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

Ethernet cable not connected?!

Hello
I have been using a wireless router for some time. Last night I decided to plug in the ethernet cable and my mac shows that the "ethernet cable is unplugged". I have tried multiple cables with my mac connected directly to the cable modem and through the router. I have restarted the modem and computer multiple times yet the mac still says the cable is unplugged. It has been about a year since I used the built in ethernet connection. I have tried this with airport on and off. Please help!

Good news!I! I got this to work at the 1000 Base/T setting. Page loading is much faster (btw in Safari I "emptied the cache" before starting to use the Ethernet).
Apparently, what needs to change is the Ethernet setting for both Ethernet and Airport.
First, go to the Ethernet>Advanced>Ethernet panel. Set it to "manually" and these settings:
Then, select OK, then "Apply".
Next, click on Airport in the Network panel. Then Advanced>Ethernet. Set it to "manually". Then, OK and apply. When you select "apply", the Ethernet indicator ought to become active. Looks like this:
After selecting "apply", it appears the Airport Ethernet setting reverts back to "automatically", but now has assigned an Ethernet number:
Here, I shut-off the Airport and I'm now happily flying on Ethernet. BTW, my laptop still connects via Airport.
The behavior here is obviously wrong, as this process ought to be much simpler. I'm going to post this thread in the L4/5 Lounge forum and see if I can get Apple's attention that way.

MSI z87-G45 GAMING Killer Nic e2200 Network Cable Not Connected?

I keep receiving this error on my PC roughly once per day. Most times it takes a complete computer restart and then waiting some time before resolving. It will happen at random intervals, sometimes lasting for over an hour.
Does anyone have a solution to this issue? For reference, I have already tried wiping the Qualcom software and installing JUST the driver, which was found on this forum in another post.
Thanks in advance!

Well my issue was the cable, but I researched this a lot when I was having problems.
What does the cmd window say when you try to ping?
I tried the following when I had issues.....
1. install new firmware, must make sure that windows firewall and security firewalls are completely turned off. The firmware states that there is a known compatibility issue with firewalls.
2. Try a static ip with google dns.
3. disable IP6, you will have to find a thread on this cause just unchecking it in the properties window doesn't disable it.
4. ip refresh/renew
5. Programs like peerblock can affect it. Do you have any VPNs?
6. I did a bios update too.
It's funny cause I was just having "general failure" issues and the first comment from Svet is to try a high quality network cable cause that was the solution to my problem.

Not Connecting to Wired Network and Forcing the loss of all Connections on the Home Network

Just got a new G550 laptop w/Win 7 OS. Tried to connect to wired router and got message "network cable not connected". Recycled laptop and router and came up with router connected to the laptop. Same message after search and identify steps finished. I then noticed I lost connection to the net/router with my other home networked units as well! Tried another cable, same results along with losing the entire home network connection. Disconnected the G550 from home network, via the cable, and the home network reconnected without any intervention. Tried another reboot directly connected to the cable modem, no go there either!
I also rebooted with the wireless search shutoff and got the same problems as on the wired attempt. Thought it might have been the NIC card so I exchanged the system back at the store. Sorry, same problem!!

I have a very similar problem... New Lenovo G550, running Vista Home Premium 64-bit. Right from the start it causes my TrendNet TEW-432BRP router to crash every 10 seconds. I bought a new DLink WBR-1310 and experience the same problem. Connecting to either router through either a wireless connection or a LAN cable connection causes the router to crash every 10 seconds. The router crashes, reboots, establishes a connection with the laptop, communication starts and then the router crashes again.
I am looking for help.

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?

You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

Found the fix. Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
+++++++++++++++++
edgravel
Re: iTunes Store Won't Load, Won't Show Error Message
Aug 13, 2011 4:32 PM (in response to Daedalme)
I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
Netsh winsock reset
Hit enter, restart PC, open iTunes, go to Store
Hope it works for you too.

My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

5140i - c42 cable - not connecting

Similar Messages

Maybe you are looking for