5140i - v03.80 - Missing Push to Talk menu item

Hello all,
I have a 5140i S40 phone running firmware version 03.80 RM-104.
The official user manual says Push to Talk should be available on this phone. It has an entire section on how to configure the PTT application. I'm assuming it's on the ROM.
The problem is that the Push to Talk application is missing from my phone. Its not listed anywhere in the menus or configuration of the phone.
How do I get it back?
John

If you have an operator customized version, the operator (carrier, service provider) may have requested Nokia to remove it from the firmware.
It may also be available as a separate, user-installable app, but as far as I know, Nokia is no longer developing the PTT (or PoC, Push to talk over Cellular, as Nokia called it) technology, and they're probably not distributing the installation packages, either.
Note that if your operator does not support Nokia's PTT, then having it in the phone is useless anyway. In other words, if operator has not purchased and still run Nokia's PTT servers, the PTT app on the phone has nothing it can connect to.
Also, if only you have a PTT app, it is also useless, unless also people you want to use it with, also have the same PTT app, and also use the same network operator, and have also subscribed to the PTT service of that operator.
Alternative (for phones that support it): An IP telephony (VoIP, Voice over IP) solution, like Skype, Fring, etc.

Similar Messages

  • Push-to-talk menu doesn't existe on Nokia 6300

    Hi everybody and sorry for my english, 'cause i'm french speaker most of the time. i'm the owner of new 6300 Nokia with un old Orange Contract.
    1: so i've got this new 6300 nokia model yesterday (after i changed another one who wasn't recognising my sim card)witch seems to miss this push-to-talk menu: what semms to be the problem, cause in the user guide it is?
    2: in the same time i didn't find where we can check the level of the baterrie, ...if it exist;
    3: can we change the ring tone of the amarm clock? if it is so where?
    Thanks, Janyjane

    Hi janyjane I think for the push to talk function you need to phone your network up and ask them to activate it. As for the battery life i don't know of any other way to check it Only the top left corner. As for the alarm tone if you go into where your music is (ie) your memory card go to your music scroll down to the tune you want and go into options scroll down to use tone and select alarm from the list. Hope this helps. Cheers Andy

  • Missing preferences, tool bars, menu items after receiving CS3 file while I have CS2

    I have Indesign CS2. I rec'd a CS3 file not knowing it was CS3. A message appeared as follows:
    Cannot Open. Please upgrade your plugins to the latest versions, or upgrade to the latest edition of Indesign.
    I went into HELP, Configure plugins. Chose "all" and "required" plugins. I then clicked ok and it said "All plugins available when you restart application" and it still wouldn't open. Then I was sent an exchange version of the same file and it still wouldn't open. I received this message:
    Cannot open. InDesign may not support the file format, a plug-in that supports the file format may be missing or the file may be open in another application.
    After this I wasn't able to get my CS2 screen back the way it was before. There's no introduction when I open the program, my tool bars aren't present, and the menu items aren't as extensive as they were before.
    It was then suggested I reinstall Cs2. I logged in under the administrator. CS2 was different than the way I had it before but the tool bars were present. I then logged in under my name and there are still problems;no tool bars, missing menu items, no intro, etc.
    I then tried rebuilding my preferences using these instructions;
    The fastest way to do this for InDesign CS2 (and any CS2 program) is to quit the program, then hold down Command-Option-Shift-Control immediately after starting it up again, and keep those keys held down. (On Windows, hold down Control-Alt-Shift.)
    If you mashed on those keys quickly enough, youll get an alert when the splash screen appears offering to Delete InDesign Preferences File?. Click Yes, but dont release the modifier keys while you do so, because youre going to get a second alert to which you should also click Yes.
    Now you can release the keys and InDesign will complete the boot-up process with fresh, clean Preferences.
    Nothing happened so my program is still missing preferences, menu items and toolbars. Any help would be greatly appreciated.
    Thanks
    Operating System Windows XP Professional
    Dell Precision 360

    First, you need to realize that resetting preferences will put them back to ground zero, not the way they were the last time you were happy.
    You can try the key combination again and see if you are any faster (we're talking near instantaneous) or you can open your user profile, show hidden files and folders and navigate to C:\Documents and Settings\Administrator\Application Data\Adobe\InDesign\Version 4.0 and rename the two files InDesign Defaults and InDesign SavedData.
    In your case, a better first option, I think, would be to try System Restore which you'll find in System Tools under the Programs > Accessories heading on the start menu. Go back to the first restore point before you tried to open the file, if you can.
    In any case, for you to open a CS3 .inx file you will need to be fully patched the the last CS2 update, and you should expect to see some text reflow issues, as well as missing any CS3 features that the author used which aren't supported in CS2.
    Peter

  • MISSING: Tools- Configure SOA menu item in SOA Suite 11g TP4

    Hi,
    I have installed 11g TP4 Jdev and followed the install guide.
    I didnt find the menu item 'Tools > Configure SOA...' itself... :((
    May i know what i might hv missed ???
    Thanks & Regards,
    ATC

    On the information page for SOA Tech Preview 4, there is a step called, Enable. You need to go to metalink to read the instructions there on how to enable SOA for TP4. Then the Configure SOA command will show up in the Tools menu.
    here is the information page: [http://www.oracle.com/technology/products/ias/bpel/techpreview/index.html]
    Heidi.

  • Missing "Cycle through Windows" menu item or shortcut?

    Am I missing something or is there indeed no "Cycle through Windows" menu item or shortcut in Pages 09?
    Hope someone can advise.

    It is very hard when you can't see what the other person is looking at and I have never seen a German keyboard, I only know that it is different.
    I think the reason why the window cycling menu item is in Finder is that windows are really part of Finder and as Apple has made them global shortcuts they thought it was the only place to park the menu item.
    Honestly I never knew it was there until now when I went looking for it. I always use the keyboard shortcuts which I stumbled on years ago.
    I am glad you found a way around the problem.
    Apple lives in their ivory tower in California and is nowhere as international as they used to be under the original Mac OS. Give them feedback, you are not the only one who has encountered this problem.
    Alles gut, ende gut.

  • Missing Text and Blank Menu Items

    I'm using the UK English version of Windows 8 64bit.
    The Creative Cloud Desktop app seems to suffer from a number of blank labels and menu items.
    Here's the main menu:
    By trial-and-error, I can find the prefences option, which presents me with this:
    My guess is that this is some kind of localization issue.
    I've tried reinstalling Creating Cloud, but hte problem remains.
    Any ideas?

    I found a solution to this, in case anyone is seeing the same problem.
    As I had suspected, the problem appears to be an isuse with a bad localization file. The trick is to remove the bad localization file.
    Navigate to:
    C:\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\resource\Dictionary
    In there, you should see a folder "en_try". Rename this to something else, eg "en_try.blah". This means the app will now fall back to using en_US.
    I have no idea what en_try is, or why it's being used in preference to en_US, but this seems to fix the problem.

  • ICal holidays missing - Find Shared Calendars menu item broken

    In iCal, Calendar menu, Find Shared Calendars...
    This menu item takes you to a broken (as of today) link:
    http://www.apple.com/ical/library/

    When clicking "Find Shared Calendars...," Leopard OS system sends IP packets to nwk-www.apple.com, 17.149.160.10.
    ・Source IP Address (private): 192.168.1.2
    ・Destination IP Address: 17.149.160.10 at the beginning of the session for "Find Shared Calendars..." procedure.
    Leopard 10.5.1 sends a DNS query to connect 128.241.220.87 that is NTT America. Communications between Leopard and NTT America go for a while. So is Omniture's server followed. Some unique user's information is transmitted on all the servers communication.
    Leopard queries DNS server (208.67.2222.222 which I set for Leopard) for metrics.apple.com (this seems to be a server for iTunes Store). What the deuce Leopard needs to call iTunes Store at the phase of finding iCal sharing calendar?
    Besides, I have not been purchased any products from iTunes Store for years.
    Actually, NTT America has been attempting odd access behaviors to my nodes for the recent few years before the business with Apple started whenever the hacker (I have been tracking him for three years.) is right behind me.
    Now NTT America 128.241.220.87 replies to Leopard with the ACK (TCP Acknowledgement flag) bit. Next, nwk-www.apple.com (17.149.160.10) also sends Leopard a ACK bit simultaneously. Leopard answers it with the ACK. Now the DNS server replies the ten host addresses to the query of metrics.apple.com: appleglobal.112.2o7.net, 66.151.152.125, 66.151.152.126, 66.151.152.143, 128.241.21.13, 128.241.21.14, 128.241.21.15, 128.241.21.146, 128.241.21.149 and 128.241.21.163.
    66.151.152.xxx = Omniture, Inc that provides web analytics solutions for internet channel monitoring. They operates the 2o7.net domains. For more information: http://en.wikipedia.org/wiki/Omniture
    128.241.21.xxx = NTT America, Inc. (http://www.nttamerica.com/products/index.php)
    At the last session, Leopard queries "wsidecar.apple.com," but strangely the DNS server answer the canonical address which is "wsidecar.apple.com.akadns.net" with its address 17.149.160.15 but not DNS registered address 17.112.152.39.
    17.149.160.15 (Apple's server but not 17.149.160.10) sends Leopard a FIN/ACK bit which means the TCP connection is closed by the server ONE-SIDEDLY despite Leopard answers to 17.149.160.15 with the acknowledgement to get ready for the US calendar sync data download start.
    Here is a nslookup wsidecar.apple.com:
    $ nslookup
    wsidecar.apple.com
    Server: 208.67.222.222
    Address: 208.67.222.222#53
    Non-authoritative answer:
    wsidecar.apple.com canonical name = wsidecar.apple.com.akadns.net.
    Name: wsidecar.apple.com.akadns.net
    Address: 17.112.152.39
    CONCLUSION: There are a few inconsistencies on TCP/IP communications.
    My computer: Power Mac G5 Dual 2.7 GHz/5GB DDR SDRAM
    OS: Mac OS X 10.5.1 and Mac OS X 10.4.11 for dual boot.
    Message was edited by: Fumiaki Kawashima

  • Missing icons, cannot open menu items

    Yesterday I updates my software and when I restarted my computer I encountered several problems.
    1) My hard drive icon is not shown on my desktop
    2) I cannot open anything in the menus of the "Finder" toolbar"
    3) I cannot not move or open any documents located on my desktop
    4) Most of the widgets in dashboard are not showing and those that are are not working properly.
    5) When I plug in my thumb drive nothing shows up on my desktop any more.
    everything else seems to be working fine. any advise?
    thanks

    First, you need to realize that resetting preferences will put them back to ground zero, not the way they were the last time you were happy.
    You can try the key combination again and see if you are any faster (we're talking near instantaneous) or you can open your user profile, show hidden files and folders and navigate to C:\Documents and Settings\Administrator\Application Data\Adobe\InDesign\Version 4.0 and rename the two files InDesign Defaults and InDesign SavedData.
    In your case, a better first option, I think, would be to try System Restore which you'll find in System Tools under the Programs > Accessories heading on the start menu. Go back to the first restore point before you tried to open the file, if you can.
    In any case, for you to open a CS3 .inx file you will need to be fully patched the the last CS2 update, and you should expect to see some text reflow issues, as well as missing any CS3 features that the author used which aren't supported in CS2.
    Peter

  • Mountain Lion Missing Report Safari Bugs Menu Item?

    I recall a Bug reporting menu option in Safari which seems to have disappeared in the latest version in Mountain Lion. Or am I missing it?
    Perhaps the Apple folks think Safari is now perfect. ;-)
    I was trying to view photos of this Hilton
    http://www.hiltongrandvacations.com/Resorts.aspx#details/index&resortId=93&backF unctionality=0
    by clicking the More Photos button, but clicking on Next arrow kept giving an error:
    Could not extract width/height from image: http://multimedia.hiltongrandvacations.com/ws/ResortGallery/dynamicImage.cfm?id= 606&width=880&height=530. Traced measures: width:0px, height: 0px.
    though the site and photos worked fine when I tried it in FireFox, etc. But, I could not find a way to report it to Apple from within SadFarI.
    Is the Report button hidden somewhere in some other menu? Thanks.
    Imran

    Post here:
    http://www.apple.com/feedback/

  • Xfce4 missing icons for menu items

    My xfce4 seems to have blank icons for some of the menu items and I can't figure out why. I installed the entire xfce4 and xfce4-goodies groups.

    maggie: are you talking about icons in the Applications menu applet? If yes, are the icons missing for applications which do not provide icons¹? If yes, then you have the answer: there is no icon displayed because there is no icon to display for the entry.
    AFAIR, the pre-4.12 Applications menu applet displayed some ugly stock icon as a placeholder, but it seems that this behaviour is no longer present in the latest release. If you truly want icons for the entries, you may set them by editing corresponding .desktop entries. The best way is placing your overrides in ~/.local/share/applications as this will not pollute pacman-managed /usr/share/applications directory.
    ¹ See the corresponding .desktop entry in /usr/share/applications/ or ~/.local/share/applications

  • I accidently knocked some keys on the keyboard and firfox is now lost at the top of the screen, I cannot see menu items if I push the curser up some of the top appears on my screen but not all please can you help me?

    I accidently knocked some keys on my keyboard. I do not know which keys my hand knocked but it caused Firefox to go beyond my visible screen at the top. The base of Firefox is still okay and views correctly. But the head is missing I cannot access my menus items such as Bookmarks etc. The screen does drop down if I push my curser up but not enough to show the menu items. Can you please help?

    Thank you for your help - this definitely sorted it out!

  • CK-200 Audio qualiy, missing menu items and softwa...

    Hi all.  First post and all that jazz.
    Wonder if anyone can assist with several issues I'm having with a CK-200.  to list them:
    Audio quality.  This is perhaps the worst problem.  I can hear the person I'm talking to quite clearly, (ISO version on decent car speakers) but the background noise reported by the other person is really really bad.  Whilst my car isn't the quietest in the world (LandRover Discovery) it's certainly not loud, but everyone has commented that they can barely hear me when I'm at motorway speeds.  Does the external microphone help remove background noise much?  I certainly hope so, as at the moment I have to be at 40mph or below to be heard properly.  I've tried calling someone else driving my car, and sure enough it sounds like the microphone is in the engine bay, and the person I'm talking to is in the boot!
    Second:  When I first got the kit, it appeared to understand that one of my phones (E90) was not compatible with downloading the address book, and so it didn't try, but if I made a few calls the kit remembered the numbers called.  After "updating" the software a few months ago, it now constantly tries to download the address book, fails, and if I try to do a "last number redial" it tells me that it can't download the address book.
    Lastly... (and has been mentioned in another thread) There appears to be a number of menu items missing, most noticeably the option to read a received text message.  The icon appears to tell me I have a new text, but there's absolutely nothing I can do about it!
    Shame, as it's a nice car kit, and the two-phone-connectivity is excellent, but I really must address these issues!
    Any and all assistance gratefully received!
    David.
    PS. as a sidenote, where can I actually buy a CA-134 for this kit from?  I know it's the cable I need, but I can't actually find one for sale anywhere!

    Glad you got it improved, I guess perhaps a 'mechanical' sound transmission problem. Not sure about inside the CK-200 unit - but inside Nokia external mic's the mike element is usually mounted in a block of foam rubber to absorb vibrations carrying through. I am certainly getting a little higher volume level on my 'answerphone' trails with an external 
    Little confused by the download issues. The CK-200 can download your contacts as one aspect but also your call history (calls made/missed/received etc) as another.
    The contacts (address book)  download certainly seems to stop dead when you set auto to off on all version and handsets I have tried. On recent software versions Nokia introduced the automatic download of call history, as far as I know this cannot be disabled - I would quite like to be able to as I don't really need it and it delays the initial connection before you can make a call. But anyway it sounds like its this thats giving you trouble. It may be down to some setting in your phone you can make to deny it permission to cooperate with the CK-200. Anyway see how it goes with V.3 first of course. (can't be long now )

  • 6230i Push To Talk

    Hey can someone help me plz? ive got a 6230i and its basically ma back up fone cos i also have an n70 but on my 6230i, I dont seem to have the push to talk settings or menu on the phone! Does anyone know why or what i can do? Thanx!
    Oh yeh btw my service provider is T-mobile and the phone is locked on T-mobile.. could T-mobile have "deleted" the access themselves because the phone came direct from them!?Message Edited by nirave on 10-Mar-2006
    04:47 AM

    There's no PTT service on T Mobile and the variant software may reflect this. 6230s dont have PTT so are you sure its a 6230i i.e. RM-72?

  • Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Yes, Bridge shortcut has been removed from PS CS5. However, you can go to File->Browse in Bridge option to open the file in Br CS6.
    Similar query has been answered here.
    http://forums.adobe.com/message/4285441

  • Why is the "Send to iDVD" command missing from the share menu in iPhoto 9.4.3 when trying to send a slideshow to iDVD?

    How come the "Send to iDVD" command is missing from the share menu? In iPhoto I used to be able to send my slideshows to iDVD simply my clicking on the slideshow, selecting the "Share" menu at the top and going to "Send to iDVD". Now in iPhoto 9.4.3 that option is missing.
    Further i am also using iDVD 7.1.2 and running OSX version 10.8.3.
    Thanks!

    Export the slideshow via the Export button at the bottom of the slideshow window with Size = Medium or Large.
    Open iDVD, choose a theme and drag the exported movie file to the menu window being careful to avoid any drop zones.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

Maybe you are looking for